Compiler leaves a 4-byte hole near the end of `dev_info`, causing
amdgpu_info_ioctl() to copy uninitialized kernel stack memory to userspace
when `size` is greater than 356.

In 2015 we tried to fix this issue by doing `= {};` on `dev_info`, which
unfortunately does not initialize that 4-byte hole. Fix it by using
memset() instead.

Cc: stable@vger.kernel.org
Fixes: c193fa91 ("drm/amdgpu: information leak in amdgpu_info_ioctl()")
Fixes: d38ceaf9 ("drm/amdgpu: add core driver (v4)")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

 * drm: fix possible use-after-free
 * dbi: fix SPI Type 1 transfer
 * drm_fb_helper: use memcpy_io on bochs' sparc64
 * mcde: fix stability
 * panel: fix display noise on auo,kd101n80-45na
 * panel: delay HPD checks for boe_nv133fhm_n61
 * bridge: drop connector check in nwl-dsi bridge
 * bridge: set proper bridge type for adv7511
 * of: fix a double free
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728110446.GA8076@linux-uq9g

A use-after-free in drm_gem_open_ioctl can happen if the
GEM object handle is closed between the idr lookup and
retrieving the size from said object since a local reference
is not being held at that point. Hold the local reference
while the object can still be accessed to fix this and
plug the potential security hole.
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1595284250-31580-1-git-send-email-cohens@codeaurora.org

The function mipi_dbi_spi1_transfer() will transfer its payload as 9-bit
data, the 9th (MSB) bit being the data/command bit. In order to do that,
it unpacks the 8-bit values into 16-bit values, then sets the 9th bit if
the byte corresponds to data, clears it otherwise. The 7 MSB are
padding. The array of now 16-bit values is then passed to the SPI core
for transfer.

This function was broken since its introduction, as the length of the
SPI transfer was set to the payload size before its conversion, but the
payload doubled in size due to the 8-bit -> 16-bit conversion.

Fixes: 02dd95fe ("drm/tinydrm: Add MIPI DBI support")
Cc: <stable@vger.kernel.org> # 5.4+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703141341.1266263-1-paul@crapouillou.net

Recent kernels have been reported to panic using the bochs_drm
framebuffer under qemu-system-sparc64 which was bisected to
commit 7a0483ac ("drm/bochs: switch to generic drm fbdev emulation").

The backtrace indicates that the shadow framebuffer copy in
drm_fb_helper_dirty_blit_real() is trying to access the real
framebuffer using a virtual address rather than use an IO access
typically implemented using a physical (ASI_PHYS) access on SPARC.

The fix is to replace the memcpy with memcpy_toio() from io.h.

memcpy_toio() uses writeb() where the original fbdev code
used sbus_memcpy_toio(). The latter uses sbus_writeb().

The difference between writeb() and sbus_memcpy_toio() is
that writeb() writes bytes in little-endian, where sbus_writeb() writes
bytes in big-endian. As endian does not matter for byte writes they are
the same. So we can safely use memcpy_toio() here.

Note that this only fixes bochs, in general fbdev helpers still have
issues with mixing up system memory and __iomem space. Fixing that will
require a lot more work.

v3:
  - Improved changelog (Daniel)
  - Added FIXME to fbdev_use_iomem (Daniel)

v2:
  - Added missing __iomem cast (kernel test robot)
  - Made changelog readable and fix typos (Mark)
  - Add flag to select iomem - and set it in the bochs driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200709193016.291267-1-sam@ravnborg.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200725191012.GA434957@ravnborg.org

A couple of fixes for issues relating to format modifiers (there's
still a patch pending from James Jones to hopefully address the
remaining ones), regression fix from the recent HDA nightmare, and a
race fix for Turing modesetting.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5aAp+FZMZGTB+Nszc==h5gEbdNV58sSRRQDF1R5qQRGg@mail.gmail.com

Merge tag 'kbuild-fixes-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild into master

Pull Kbuild fixes from Masahiro Yamada:

 - do not use non-portable strsep() in a host program

 - fix single target builds for external modules

 - change Clang's --prefix option to make it work for the latest Clang

* tag 'kbuild-fixes-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation
  kbuild: fix single target builds for external modules
  modpost: remove use of non-standard strsep() in HOSTCC code

Whenever a display update was sent, apart from updating
the memory base address, we called mcde_display_send_one_frame()
which also sent a command to the display requesting the TE IRQ
and enabling the FIFO.

When continuous updates are running this is wrong: we need
to only send this to start the flow to the display on
the very first update. This lead to the display pipeline
locking up and crashing.

Check if the flow is already running and in that case
do not call mcde_display_send_one_frame().

This fixes crashes on the Samsung GT-S7710 (Skomer).
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200718233323.3407670-1-linus.walleij@linaro.org

Merge branch 'parisc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux into master

Pull parisc fixes from Helge Deller:
 "Two fixes:

   - Add the cmpxchg() function for pointers to u8 values. This fixes a
     kernel linking error when building the tusb1210 driver (from Liam
     Beguin).

   - Add a define for atomic64_set_release() to fix CPU soft lockups
     which happen because of missing unlocks while processing bit
     operations (from John David Anglin)"

* 'parisc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Add atomic64_set_release() define to avoid CPU soft lockups
  parisc: add support for cmpxchg on u8 pointers

We don't create a connector but let panel_bridge handle that so there's
no point in rejecting DRM_BRIDGE_ATTACH_NO_CONNECTOR.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/8b6545b991afce6add0a24f5f5d116778b0cb763.1595096667.git.agx@sigxcpu.org

Fine tune the HBP and HFP to avoid the dot noise on the left and right edges.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714123332.37609-1-jitao.shi@mediatek.com

On boe_nv133fhm_n62 (and presumably on boe_nv133fhm_n61) a scope shows
a small spike on the HPD line right when you power the panel on.  The
picture looks something like this:

         +--------------------------------------
         |
         |
         |
Power ---+
                                           +---
                                           |
              ++                           |
         +----+|                           |
HPD -----+     +---------------------------+

So right when power is applied there's a little bump in HPD and then
there's small spike right before it goes low.  The total time of the
little bump plus the spike was measured on one panel as being 8 ms
long.  The total time for the HPD to go high on the same panel was
51.2 ms, though the datasheet only promises it is < 200 ms.

When asked about this glitch, BOE indicated that it was expected and
persisted until the TCON has been initialized.

If this was a real hotpluggable DP panel then this wouldn't matter a
whole lot.  We'd debounce the HPD signal for a really long time and so
the little blip wouldn't hurt.  However, this is not a hotpluggable DP
panel and the the debouncing logic isn't needed and just shows down
the time needed to get the display working.  This is why the code in
panel_simple_prepare() doesn't do debouncing and just waits for HPD to
go high once.  Unfortunately if we get unlucky and happen to poll the
HPD line right at the spike we can try talking to the panel before
it's ready.

Let's handle this situation by putting in a 15 ms prepare delay and
decreasing the "hpd absent delay" by 15 ms.  That means:
* If you don't have HPD hooked up at all you've still got the
  hardcoded 200 ms delay.
* If you've got HPD hooked up you will always wait at least 15 ms
  before checking HPD.  The only case where this could be bad is if
  the panel is sharing a voltage rail with something else in the
  system and was already turned on long before the panel came up.  In
  such a case we'll be delaying 15 ms for no reason, but it's not a
  huge delay and I don't see any other good solution to handle that
  case.

Even though the delay was measured as 8 ms, 15 ms was chosen to give a
bit of margin.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716132120.1.I01e738cd469b61fc9b28b3ef1c6541a4f48b11bf@changeid

After the drm_bridge_connector_init() helper function has been added,
the ADV driver has been changed accordingly. However, the 'type'
field of the bridge structure was left unset, which makes the helper
function always return -EINVAL.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Vinod Koul <vkoul@kernel.org> # tested on DragonBoard 410c
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720124228.12552-1-laurentiu.palcu@oss.nxp.com

Merge tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into master

Pull char/misc driver fixes from Greg KH:
 "Here are a few small driver fixes for 5.8-rc7

  They include:

   - habanalabs fixes

   - tiny fpga driver fixes

   - /dev/mem fixup from previous changes

   - interconnect driver fixes

   - binder fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  interconnect: msm8916: Fix buswidth of pcnoc_s nodes
  interconnect: Do not skip aggregation for disabled paths
  /dev/mem: Add missing memory barriers for devmem_inode
  binder: Don't use mmput() from shrinker function.
  habanalabs: prevent possible out-of-bounds array access
  fpga: dfl: fix bug in port reset handshake
  fpga: dfl: pci: reduce the scope of variable 'ret'
  habanalabs: set 4s timeout for message to device CPU
  habanalabs: set clock gating per engine
  habanalabs: block WREG_BULK packet on PDMA

Merge tag 'driver-core-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into master

Pull driver core fix from Greg KH:
 "A single driver core fix for 5.8-rc7. It resolves a problem found in
  the previous fix for this code made in 5.8-rc6. Hopefully this is all
  now cleared up, as this seems to be the last of the reported issues in
  this area, and was tested on the problem hardware.

  This patch has been in linux-next with no reported problems"

* tag 'driver-core-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  device property: Avoid NULL pointer dereference in device_get_next_child_node()

Merge tag 'staging-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging into master

Pull staging driver fixes from Greg KH:
 "Five small staging driver fixes for 5.8-rc7 to resolve some reported
  problems:

   - four comedi driver fixes for problems found with them

   - a syzbot-found fix for the wlang-ng driver that resolves a much
     reported problem.

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: wlan-ng: properly check endpoint types
  staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift
  staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift
  staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift
  staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support

Pull tty/serial/fbcon fixes from Greg KH:
 "Here are some small tty and serial and fbcon fixes for 5.8-rc7 to
  resolve some reported issues.

  The fbcon fix is in here as it was simpler to take it this way (and it
  was acked by the maintainer) as it was related to the vt console fix
  as well, both of which resolve syzbot-found issues in the console
  handling code.

  The other serial driver fixes are for small issues reported in the -rc
  releases.

  All of these have been in linux-next with no reported issues"

* tag 'tty-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35X
  fbdev: Detect integer underflow at "struct fbcon_ops"->clear_margins.
  serial: 8250_mtk: Fix high-speed baud rates clamping
  serial: 8250: fix null-ptr-deref in serial8250_start_tx()
  serial: tegra: drop bogus NULL tty-port checks
  serial: tegra: fix CREAD handling for PIO
  tty: xilinx_uartps: Really fix id assignment
  vt: Reject zero-sized screen buffer size.

Fix double-free bug in the error path.

Fixes: 65290075 ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1595502654-40595-1-git-send-email-biju.das.jz@bp.renesas.com

Pull USB fixes from Greg KH:
 "Three small USB XHCI driver fixes for 5.8-rc7.

  They all resolve some minor issues that have been reported on some
  different platforms.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: tegra: Fix allocation for the FPCI context
  usb: xhci: Fix ASM2142/ASM3142 DMA addressing
  usb: xhci-mtk: fix the failure of bandwidth allocation

Pull SCSI fix from James Bottomley:
 "Small core patch to fix a corner case bug: we forgot to run the queues
  to handle starvation in the error exit from the scsi_queue_rq routine,
  which can lead to hangs on error conditions"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: core: Run queue in case of I/O resource contention failure

Merge tag 'riscv-for-linus-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into master

Pull RISC-V fixes from Palmer Dabbelt:
 "A few more fixes this week:

   - A fix to avoid using SBI calls during kasan initialization, as the
     SBI calls themselves have not been probed yet.

   - Three fixes related to systems with multiple memory regions"

* tag 'riscv-for-linus-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Parse all memory blocks to remove unusable memory
  RISC-V: Do not rely on initrd_start/end computed during early dt parsing
  RISC-V: Set maximum number of mapped pages correctly
  riscv: kasan: use local_tlb_flush_all() to avoid uninitialized __sbi_rfence

Merge tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - Fix a section end page alignment assumption that was causing
     crashes

   - Fix ORC unwinding on freshly forked tasks which haven't executed
     yet and which have empty user task stacks

   - Fix the debug.exception-trace=1 sysctl dumping of user stacks,
     which was broken by recent maccess changes"

* tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/dumpstack: Dump user space code correctly again
  x86/stacktrace: Fix reliable check for empty user task stacks
  x86/unwind/orc: Fix ORC for newly forked tasks
  x86, vmlinux.lds: Page-align end of ..page_aligned sections

Merge tag 'perf-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master

Pull uprobe fix from Ingo Molnar:
 "Fix an interaction/regression between uprobes based shared library
  tracing & GDB"

* tag 'perf-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression

Merge tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master

Pull timer fix from Ingo Molnar:
 "Fix a suspend/resume regression (crash) on TI AM3/AM4 SoC's"

* tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4

Merge tag 'sched-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master

Pull scheduler fixes from Ingo Molnar:
 "Fix a race introduced by the recent loadavg race fix, plus add a debug
  check for a hard to debug case of bogus wakeup function flags"

* tag 'sched-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Warn if garbage is passed to default_wake_function()
  sched: Fix race against ptrace_freeze_trace()

Merge tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master

Pull EFI fixes from Ingo Molnar:
 "Various EFI fixes:

   - Fix the layering violation in the use of the EFI runtime services
     availability mask in users of the 'efivars' abstraction

   - Revert build fix for GCC v4.8 which is no longer supported

   - Clean up some x86 EFI stub details, some of which are borderline
     bugs that copy around garbage into padding fields - let's fix these
     out of caution.

   - Fix build issues while working on RISC-V support

   - Avoid --whole-archive when linking the stub on arm64"

* tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Revert "efi/x86: Fix build with gcc 4"
  efi/efivars: Expose RT service availability via efivars abstraction
  efi/libstub: Move the function prototypes to header file
  efi/libstub: Fix gcc error around __umoddi3 for 32 bit builds
  efi/libstub/arm64: link stub lib.a conditionally
  efi/x86: Only copy upto the end of setup_header
  efi/x86: Remove unused variables

Pull cifs fix from Steve French:
 "A fix for a recently discovered regression in rename to older servers
  caused by a recent patch"

* tag '5.8-rc6-cifs-fix' of git://git.samba.org/sfrench/cifs-2.6:
  Revert "cifs: Fix the target file was deleted when rename failed."

Pull networking fixes from David Miller:

 1) Fix RCU locaking in iwlwifi, from Johannes Berg.

 2) mt76 can access uninitialized NAPI struct, from Felix Fietkau.

 3) Fix race in updating pause settings in bnxt_en, from Vasundhara
    Volam.

 4) Propagate error return properly during unbind failures in ax88172a,
    from George Kennedy.

 5) Fix memleak in adf7242_probe, from Liu Jian.

 6) smc_drv_probe() can leak, from Wang Hai.

 7) Don't muck with the carrier state if register_netdevice() fails in
    the bonding driver, from Taehee Yoo.

 8) Fix memleak in dpaa_eth_probe, from Liu Jian.

 9) Need to check skb_put_padto() return value in hsr_fill_tag(), from
    Murali Karicheri.

10) Don't lose ionic RSS hash settings across FW update, from Shannon
    Nelson.

11) Fix clobbered SKB control block in act_ct, from Wen Xu.

12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang.

13) IS_UDPLITE cleanup a long time ago, incorrectly handled
    transformations involving UDPLITE_RECV_CC. From Miaohe Lin.

14) Unbalanced locking in netdevsim, from Taehee Yoo.

15) Suppress false-positive error messages in qed driver, from Alexander
    Lobakin.

16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye.

17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost.

18) Uninitialized value in geneve_changelink(), from Cong Wang.

19) Fix deadlock in xen-netfront, from Andera Righi.

19) flush_backlog() frees skbs with IRQs disabled, so should use
    dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov
    Kasiviswanathan.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
  drivers/net/wan: lapb: Corrected the usage of skb_cow
  dev: Defer free of skbs in flush_backlog
  qrtr: orphan socket in qrtr_release()
  xen-netfront: fix potential deadlock in xennet_remove()
  flow_offload: Move rhashtable inclusion to the source file
  geneve: fix an uninitialized value in geneve_changelink()
  bonding: check return value of register_netdevice() in bond_newlink()
  tcp: allow at most one TLP probe per flight
  AX.25: Prevent integer overflows in connect and sendmsg
  cxgb4: add missing release on skb in uld_send()
  net: atlantic: fix PTP on AQC10X
  AX.25: Prevent out-of-bounds read in ax25_sendmsg()
  sctp: shrink stream outq when fails to do addstream reconf
  sctp: shrink stream outq only when new outcnt < old outcnt
  AX.25: Fix out-of-bounds read in ax25_connect()
  enetc: Remove the mdio bus on PF probe bailout
  net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload
  net: ethernet: ave: Fix error returns in ave_init
  drivers/net/wan/x25_asy: Fix to make it work
  ipvs: fix the connection sync failed in some cases
  ...

Currently, maximum physical memory allowed is equal to -PAGE_OFFSET.
That's why we remove any memory blocks spanning beyond that size. However,
it is done only for memblock containing linux kernel which will not work
if there are multiple memblocks.

Process all memory blocks to figure out how much memory needs to be removed
and remove at the end instead of updating the memblock list in place.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Currently, initrd_start/end are computed during early_init_dt_scan
but used during arch_setup. We will get the following panic if initrd is used
and CONFIG_DEBUG_VIRTUAL is turned on.

[    0.000000] ------------[ cut here ]------------
[    0.000000] kernel BUG at arch/riscv/mm/physaddr.c:33!
[    0.000000] Kernel BUG [#1]
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-rc4-00015-ged0b226fed02 #886
[    0.000000] epc: ffffffe0002058d2 ra : ffffffe0000053f0 sp : ffffffe001001f40
[    0.000000]  gp : ffffffe00106e250 tp : ffffffe001009d40 t0 : ffffffe00107ee28
[    0.000000]  t1 : 0000000000000000 t2 : ffffffe000a2e880 s0 : ffffffe001001f50
[    0.000000]  s1 : ffffffe0001383e8 a0 : ffffffe00c087e00 a1 : 0000000080200000
[    0.000000]  a2 : 00000000010bf000 a3 : ffffffe00106f3c8 a4 : ffffffe0010bf000
[    0.000000]  a5 : ffffffe000000000 a6 : 0000000000000006 a7 : 0000000000000001
[    0.000000]  s2 : ffffffe00106f068 s3 : ffffffe00106f070 s4 : 0000000080200000
[    0.000000]  s5 : 0000000082200000 s6 : 0000000000000000 s7 : 0000000000000000
[    0.000000]  s8 : 0000000080011010 s9 : 0000000080012700 s10: 0000000000000000
[    0.000000]  s11: 0000000000000000 t3 : 000000000001fe30 t4 : 000000000001fe30
[    0.000000]  t5 : 0000000000000000 t6 : ffffffe00107c471
[    0.000000] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003
[    0.000000] random: get_random_bytes called from print_oops_end_marker+0x22/0x46 with crng_init=0

To avoid the error, initrd_start/end can be computed from phys_initrd_start/size
in setup itself. It also improves the initrd placement by aligning the start
and size with the page size.

Fixes: 76d2a049 ("RISC-V: Init and Halt Code")
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

This patch fixed 2 issues with the usage of skb_cow in LAPB drivers
"lapbether" and "hdlc_x25":

1) After skb_cow fails, kfree_skb should be called to drop a reference
to the skb. But in both drivers, kfree_skb is not called.

2) skb_cow should be called before skb_push so that is can ensure the
safety of skb_push. But in "lapbether", it is incorrectly called after
skb_push.

More details about these 2 issues:

1) The behavior of calling kfree_skb on failure is also the behavior of
netif_rx, which is called by this function with "return netif_rx(skb);".
So this function should follow this behavior, too.

2) In "lapbether", skb_cow is called after skb_push. This results in 2
logical issues:
   a) skb_push is not protected by skb_cow;
   b) An extra headroom of 1 byte is ensured after skb_push. This extra
      headroom has no use in this function. It also has no use in the
      upper-layer function that this function passes the skb to
      (x25_lapb_receive_frame in net/x25/x25_dev.c).
So logically skb_cow should instead be called before skb_push.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IRQs are disabled when freeing skbs in input queue.
Use the IRQ safe variant to free skbs here.

Fixes: 145dd5f9 ("net: flush the softnet backlog in process context")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, maximum number of mapper pages are set to the pfn calculated
from the memblock size of the memblock containing kernel. This will work
until that memblock spans the entire memory. However, it will be set to
a wrong value if there are multiple memblocks defined in kernel
(e.g. with efi runtime services).

Set the the maximum value to the pfn calculated from dram size.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Merge tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into master

Pull PCI fixes from Bjorn Helgaas:

 - Reject invalid IRQ 0 command line argument for virtio_mmio because
   IRQ 0 now generates warnings (Bjorn Helgaas)

 - Revert "PCI/PM: Assume ports without DLL Link Active train links in
   100 ms", which broke nouveau (Bjorn Helgaas)

* tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms"
  virtio-mmio: Reject invalid IRQ 0 command line argument

We have to detach sock from socket in qrtr_release(),
otherwise skb->sk may still reference to this socket
when the skb is released in tun->queue, particularly
sk->sk_wq still points to &sock->wq, which leads to
a UAF.

Reported-and-tested-by: syzbot+6720d64f31c081c2f708@syzkaller.appspotmail.com
Fixes: 28fb4e59 ("net: qrtr: Expose tunneling endpoint to user space")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-2020-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.8

Second set of fixes for v5.8, and hopefully also the last. Three
important regressions fixed.

ath9k

* fix a regression which broke support for all ath9k usb devices

ath10k

* fix a regression which broke support for all QCA4019 AHB devices

iwlwifi

* fix a regression which broke support for some Killer Wireless-AC 1550 cards
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There's a potential race in xennet_remove(); this is what the driver is
doing upon unregistering a network device:

  1. state = read bus state
  2. if state is not "Closed":
  3.    request to set state to "Closing"
  4.    wait for state to be set to "Closing"
  5.    request to set state to "Closed"
  6.    wait for state to be set to "Closed"

If the state changes to "Closed" immediately after step 1 we are stuck
forever in step 4, because the state will never go back from "Closed" to
"Closing".

Make sure to check also for state == "Closed" in step 4 to prevent the
deadlock.

Also add a 5 sec timeout any time we wait for the bus state to change,
to avoid getting stuck forever in wait_event().
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull nfsd fix from Bruce Fields:
 "Just one fix for a NULL dereference if someone happens to read
  /proc/fs/nfsd/client/../state at the wrong moment"

* tag 'nfsd-5.8-2' of git://linux-nfs.org/~bfields/linux:
  nfsd4: fix NULL dereference in nfsd/clients display code

I noticed that touching linux/rhashtable.h causes lib/vsprintf.c to
be rebuilt.  This dependency came through a bogus inclusion in the
file net/flow_offload.h.  This patch moves it to the right place.

This patch also removes a lingering rhashtable inclusion in cls_api
created by the same commit.

Fixes: 4e481908 ("flow_offload: move tc indirect block to...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>