1. 19 Jun, 2017 8 commits
    • Olof Johansson's avatar
      Merge tag 'sunxi-dt-h5-for-4.13' of... · b69cfb5a
      Olof Johansson authored
      Merge tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64
      
      Allwinner H5 DT changes for 4.13
      
      Just like the H3, this is mostly about enabling the EMAC on the H5, and
      also has a new board, the Orange Pi Zero Plus 2
      
      * tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
        arm64: allwinner: h5: Add initial Orangepi Zero Plus 2 support
        arm64: allwinner: h5: enable dwmac-sun8i for Nano Pi NEO2
        arm64: allwinner: h5: enable dwmac-sun8i for Orange Pi Prime
        arm64: allwinner: h5: sort the device nodes in / part for some boards
        arm64: allwinner: h5: add support for NanoPi NEO2 board
        arm64: allwinner: h5: add support for Orange Pi Prime board
        arm64: allwinner: orangepi-pc2: Enable dwmac-sun8i
        arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver
        arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module
        ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      b69cfb5a
    • Olof Johansson's avatar
      Merge tag 'sunxi-dt64-for-4.13' of... · 08d13c70
      Olof Johansson authored
      Merge tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64
      
      Allwinner arm64 DT changes for 4.13
      
      Our usual arm64 changes. The most notable things are the EMAC support and
      USB support enhancements. There's also support for the SoPine SoM, and the
      OrangePi Win.
      
      * tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
        arm64: allwinner: a64: Add initial Orangepi Win/WinPlus support
        arm64: allwinner: a64: add device tree for SoPine with baseboard
        arm64: allwinner: bananapi-m64: Enable dwmac-sun8i
        arm64: allwinner: pine64-plus: Enable dwmac-sun8i
        arm64: allwinner: pine64: Enable dwmac-sun8i
        arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver
        arm64: allwinner: sun50i-a64: Add dt node for the syscon control module
        arm64: allwinner: a64: add DTSI file for SoPine SoM
        arm64: allwinner: a64: Convert CCU raw number references to macros
        arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl
        arm64: allwinner: a64: enable RSB on A64
        arm64: dts: allwinner: pine64: Add remaining UART aliases
        arm64: dts: allwinner: a64: Add UART2 pin nodes
        arm64: allwinner: a64: enable EHCI0/OHCI0 for Pine64
        arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      08d13c70
    • Olof Johansson's avatar
      Merge tag 'amlogic-dt64' of... · 0fd5e852
      Olof Johansson authored
      Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64
      
      Amlogic 64-bit DT changes for v4.13
      - cleanup/reorganize alphabetically to better avoid conflicts
      - add HDMI and CVBS nodes for multiple boards
      - new pinctrl pins: SPI, HDMI CEC
      - SCPI: fix thermal sensor reporting
      
      New board support
      - NanoPi K2 (GXBB)
      - R-Box Pro (GXM)
      
      * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (36 commits)
        ARM64: dts: meson-gxl-s905x-p212: Add HDMI and CVBS nodes
        ARM64: dts: meson-gxl-s905x-khadas-vim: Add HDMI nodes
        ARM64: dts: meson-gxl-s905d-p230: Add HDMI nodes
        ARM64: dts: meson-gxbb-wetek-play2: Add HDMI and CVBS Nodes
        ARM64: dts: meson-gx: Fix sensors reporting from SCP
        ARM64: dts: meson-gxl: Add SPI pinctrl nodes
        ARM64: dts: meson-gxbb: Add SPI pinctrl nodes
        ARM64: dts: meson-gxl: Add Ethernet PHY LEDS pins nodes
        ARM64: dts: meson-gxl: Add CEC pins nodes
        ARM64: dts: meson-gxbb: Add CEC pins nodes
        ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base
        ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
        ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
        arm64: dts: amlogic: Add NanoPi K2
        dt-bindings: arm: amlogic: Add NanoPi K2
        arm64: dts: meson-gxm: Add R-Box Pro
        dt-bindings: arm: amlogic: Add R-Box Pro
        dt-bindings: Add Kingnovel vendor prefix
        arm64: dts: meson-gx-p23x-q20x: Fix node order
        arm64: dts: meson-gxm-nexbox-a1: Fix node order
        ...
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      0fd5e852
    • Olof Johansson's avatar
      Merge tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64 · 8aba6143
      Olof Johansson authored
      This pull request contains Broadcom ARM64-based SoCs Device Tree changes for
      4.13. Please note the following from Eric:
      
      I've based this summary on the bcm2835-dt-next tag, to clarify what's in this
      patch series, but it does require being careful since it involves a cross-merge
      between branches.
      
      - Anup documents the Broadcom Stingray binding, common clocks, adds initial
        support for the Stingray DTSI and DTS files and adds support for the PL022,
        PL330 and SP805
      
      - Sandeep adds the clock nodes to the Stingray Device Tree nodes
      
      - Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes
      
      - Oza adds I2C Device Tree nodes to the Stingray DTSes
      
      - Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC
      
      - Ravijeta adds support for the USB Dual Role PHY on Northstar 2
      
      - Gerd starts adding references to the sdhost and sdhci controllers, and then
        switches the sdcard to to use the SDHOST (faster than SDHCI)
      
      - Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi
        thermal driver to work correctly
      
      * tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux:
        arm64: dts: NS2: Add USB DRD PHY device tree node
        ARM64: dts: bcm2837: Define CPU thermal coefficients
        arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
        arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
        arm64: dts: Add I2C DT nodes for Stingray SoC
        arm64: dts: Add GPIO DT nodes for Stingray SOC
        arm64: dts: Add pinctrl DT nodes for Stingray SOC
        arm64: dts: Add NAND DT nodes for Stingray SOC
        arm64: dts: Add clock DT nodes for Stingray SOC
        arm64: dts: Initial DTS files for Broadcom Stingray SOC
        dt-bindings: clk: Extend binding doc for Stingray SOC
        dt-bindings: bcm: Add Broadcom Stingray bindings document
        ARM: dts: bcm283x: switch from &sdhci to &sdhost
        arm64: dts: bcm2837: add &sdhci and &sdhost
        ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
        ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      8aba6143
    • Olof Johansson's avatar
      Merge tag 'uniphier-dt64-v4.13' of... · d828e978
      Olof Johansson authored
      Merge tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64
      
      UniPhier ARM64 SoC DT updates for v4.13
      
      - specify timing delay properties of eMMC
      - fix W=1 build warnings
      - increase memory reserve size
      - use SPDX License Identifier
      - add new board support (LD11/LD20 global)
      
      * tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
        arm64: dts: uniphier: add support for LD20 Global board
        arm64: dts: uniphier: add support for LD11 Global board
        arm64: dts: uniphier: use SPDX-License-Identifier
        arm64: dts: uniphier: reserve more memory for LD11/LD20
        arm64: dts: uniphier: fix simple-bus unit address format error
        arm64: dts: uniphier: Use - instead of @ for DT OPP entries
        arm64: dts: uniphier: add cdns, phy-dll-delay-sdclk(-hsmmc) for eMMC
        arm64: dts: uniphier: add input-delay properties to Cadence eMMC node
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      d828e978
    • Olof Johansson's avatar
      Merge tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek into next/dt64 · d8a41096
      Olof Johansson authored
      Add device tree nodes for
      mt8173:
      - split USB SuperSpeed port in HighSpeed and SuperSpeed ports.
      - move USB phy clocks up in hierarchy to met new bindings description
      - move MDP nodes up in hierarchy to met new bindings description
      
      mt6797:
      - add basic SoC support
      - add clock driver
      - add power domain
      
      dt-bindings:
      - clean-up i2c binding description
      - add binding for mt2701 i2c node
      - add fallback compatible to scpsys binding description
      - add bindings description for mt7622 and mt6796
      
      * tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek:
        dt-bindings: mediatek: add bindings for MediaTek MT7622 SoC
        arm64: dts: mt8173: Fix mdp device tree
        dt-bindings: i2c: Add Mediatek MT2701 i2c binding
        dt-bindings: i2c-mtk: Add mt7623 binding
        dt-bindings: i2c-mtk: Delete bindings
        dt-bindings: i2c-mt6577: Rename file to reflect bindings
        dt-bindings: mtk-sysirq: Correct bindings for supported SoCs
        arm64: dts: mediatek: add clk and scp nodes for MT6797
        dt-bindings: mediatek: add MT6797 power dt-bindings
        arm64: dts: mediatek: add mt6797 support
        dt-bindings: mediatek: Add bindings for mediatek MT6797 Platform
        arm64: dts: mt8173: move clock from phy node into port nodes
        arm64: dts: mt8173: split usb SuperSpeed port into two ports
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      d8a41096
    • Olof Johansson's avatar
      Merge tag 'samsung-dt64-4.13' of... · c7404287
      Olof Johansson authored
      Merge tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
      
      Samsung DeviceTree ARM64 update for v4.13:
      1. Remove unneeded TE interrupt gpio property.
      
      * tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
        arm64: dts: exynos: Remove the te-gpios property in the TM2 boards
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      c7404287
    • Olof Johansson's avatar
      Merge tag 'v4.13-rockchip-dts64-1' of... · b21af975
      Olof Johansson authored
      Merge tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
      
      Support for the new rk3399 firefly board; extending the pcie ranges to
      make usage of pci switches possible; some more qos and pinctrl nodes on
      rk3399; updates for the rk3399 cpu operating points including separate
      opps for the higher rates OP1 variant of the chip and mmc-nodes for
      the rk3328.
      
      * tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
        arm64: dts: rockchip: update common rk3399 operating points
        arm64: dts: rockchip: introduce rk3399-op1 operating points
        arm64: dts: rockchip: enable usb3 controllers on rk3399-firefly
        arm64: dts: rockchip: add ethernet0 alias on rk3399
        arm64: dts: rockchip: bring rk3399-firefly power-tree in line
        arm64: dts: rockchip: add sdmmc/sdio/emmc nodes for RK3328 SoCs
        arm64: dts: rockchip: extent IORESOURCE_MEM_64 of PCIe for rk3399
        arm64: dts: rockchip: extent bus-ranges of PCIe for rk3399
        arm64: dts: rockchip: add pinctrl settings for some rk3399 peripherals
        arm64: dts: rockchip: add some missing qos nodes on rk3399
        arm64: dts: rockchip: add support for firefly-rk3399 board
        dt-bindings: add firefly-rk3399 board support
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      b21af975
  2. 13 Jun, 2017 3 commits
  3. 12 Jun, 2017 2 commits
  4. 09 Jun, 2017 4 commits
  5. 08 Jun, 2017 9 commits
  6. 07 Jun, 2017 14 commits