Driver doesn't pass the number of tasks to the QM init logic
which would cause back-pressure in scenarios requiring many tasks
[E.g., using max MRs] and thus reduced performance.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After previos changes in HW-stop scheme, VFs stopped sending CLOSE
messages to their PFs when they unload.

Fixes: 1226337a ("qed: Correct HW stop flow")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When (re|un)loading, Tx-queues belonging to XDP would not get freed.

Fixes: cb6aeb07 ("qede: Add support for XDP_TX")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
mlx4 misc fixes

This patchset contains misc bug fixes from the team
to the mlx4 Core and Eth drivers.

Series generated against net commit:
32f1bc0f Revert "ipv4: restore rt->fi for reference counting"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Under SRIOV resource management, extra counters are allocated to VFs
from a free pool. If that pool is empty, the ALLOC_RES command for
a counter resource fails -- and this generates a misleading error
message in the message log.

Under SRIOV, each VF is allocated (i.e., guaranteed) 2 counters --
one counter per port. For ETH ports, the RoCE driver requests an
additional counter (above the guaranteed counters). If that request
fails, the VF RoCE driver simply uses the default (i.e., guaranteed)
counter for that port.

Thus, failing to allocate an additional counter does not constitute
a  problem, and the error message on the PF when this occurs should
be reduced to debug level.

Finally, to identify the situation that the reason for the failure is
that no resources are available to grant to the VF, we modified the
error returned by mlx4_grant_resource to -EDQUOT (Quota exceeded),
which more accurately describes the error.

Fixes: c3abb51b ("IB/mlx4: Add RoCE/IB dedicated counters")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Inserting steering rules with illegal ring is an invalid operation,
block it.

Fixes: 82067281 ('net/mlx4_en: Manage flow steering rules with ethtool')
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The error print within mlx4_en_calc_rx_buf() should be a debug print.

Fixes: 51151a16 ('mlx4: allow order-0 memory allocations in RX path')
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use time_after() for time comparison with the new fix.
Signed-off-by: Karim Eshapa <karim.eshapa@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of a direct cross-type cast, use conatiner_of() to locate
the embedded structure, even in the face of future struct layout
randomization.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 82486aa6.

As implemented, this causes dangling netdevice refs.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an error is encountered in mdio_mux_init(), the error path will call
mdiobus_free().  Since mdiobus_register() has been called prior to
mdio_mux_init(), the bus->state will not be MDIOBUS_UNREGISTERED.  This
causes a BUG_ON() in mdiobus_free().  To correct this issue, add an
error path for mdio_mux_init() which calls mdiobus_unregister() prior to
mdiobus_free().
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: 98bc865a ("net: mdio-mux: Add MDIO mux driver for iProc SoCs")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When users set flow control using ethtool the bits are set properly in the
CPGMAC_SL MACCONTROL register, but the FIFO depth in the respective Port n
Maximum FIFO Blocks (Pn_MAX_BLKS) registers remains set to the minimum size
reset value. When receive flow control is enabled on a port, the port's
associated FIFO block allocation must be adjusted. The port RX allocation
must increase to accommodate the flow control runout. The TRM recommends
numbers of 5 or 6.

Hence, apply required Port FIFO configuration to
Pn_MAX_BLKS.Pn_TX_MAX_BLKS=0xF and Pn_MAX_BLKS.Pn_RX_MAX_BLKS=0x5 during
interface initialization.

Cc: Schuyler Patton <spatton@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For each netns (except init_net), we initialize its null entry
in 3 places:

1) The template itself, as we use kmemdup()
2) Code around dst_init_metrics() in ip6_route_net_init()
3) ip6_route_dev_notify(), which is supposed to initialize it after
   loopback registers

Unfortunately the last one still happens in a wrong order because
we expect to initialize net->ipv6.ip6_null_entry->rt6i_idev to
net->loopback_dev's idev, thus we have to do that after we add
idev to loopback. However, this notifier has priority == 0 same as
ipv6_dev_notf, and ipv6_dev_notf is registered after
ip6_route_dev_notifier so it is called actually after
ip6_route_dev_notifier. This is similar to commit 2f460933
("ipv6: initialize route null entry in addrconf_init()") which
fixes init_net.

Fix it by picking a smaller priority for ip6_route_dev_notifier.
Also, we have to release the refcnt accordingly when unregistering
loopback_dev because device exit functions are called before subsys
exit functions.
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2017-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
A couple more fixes:
 * don't try to authenticate during reconfiguration, which causes
   drivers to get confused
 * fix a kernel-doc warning for a recently merged change
 * fix MU-MIMO group configuration (relevant only for monitor mode)
 * more rate flags fix: remove stray RX_ENC_FLAG_40MHZ
 * fix IBSS probe response allocation size
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The zero padding that is added to NTB's does
not zero the memory correctly.
This is because the skb_put modifies the value
of skb_out->len which results in the memset
command not setting any memory to zero as
(ctx->tx_max - skb_out->len) == 0.

I have resolved this by storing the size of
the memory to be zeroed before the skb_put
and using this in the memset call.
Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andy Shevchenko says:

====================
stmmac: pci: Fix crash on Intel Galileo Gen2

Due to misconfiguration of PCI driver for Intel Quark the user will get
a kernel crash:

udhcpc: started, v1.26.2
stmmaceth 0000:00:14.6 eth0: device MAC address 98:4f:ee:05:ac:47
Generic PHY stmmac-a6:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-a6:01, irq=-1)
stmmaceth 0000:00:14.6 eth0: IEEE 1588-2008 Advanced Timestamp supported
stmmaceth 0000:00:14.6 eth0: registered PTP clock
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

udhcpc: sending discover

stmmaceth 0000:00:14.6 eth0: Link is Up - 100Mbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: stmmac_xmit+0xf1/0x1080

Fix this by adding necessary settings.

P.S. I split fix to three patches according to what each of them adds.
====================
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

New helper is added in order to prevent misconfiguration happened
for one of the platforms when configuration data is expanded.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit abe80fdc

    ("net: stmmac: RX queue routing configuration")

missed Intel Quark configuration. Append it here.

Fixes: abe80fdc ("net: stmmac: RX queue routing configuration")
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit a8f5102a

	("net: stmmac: TX and RX queue priority configuration")

missed Intel Quark configuration. Append it here.

Fixes: a8f5102a ("net: stmmac: TX and RX queue priority configuration")
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit 26d6851f

	("net: stmmac: set default number of rx and tx queues in stmmac_pci")

missed Intel Quark configuration. Append it here.

Fixes: 26d6851f ("net: stmmac: set default number of rx and tx queues in stmmac_pci")
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch fixes two things at once:

1) It checks the env->allow_ptr_leaks and only prints the map address to
   the log if we have the privileges to do so, otherwise it just dumps 0
   as we would when kptr_restrict is enabled on %pK. Given the latter is
   off by default and not every distro sets it, I don't want to rely on
   this, hence the 0 by default for unprivileged.

2) Printing of ldimm64 in the verifier log is currently broken in that
   we don't print the full immediate, but only the 32 bit part of the
   first insn part for ldimm64. Thus, fix this up as well; it's okay to
   access, since we verified all ldimm64 earlier already (including just
   constants) through replace_map_fd_with_map_ptr().

Fixes: 1be7f75d ("bpf: enable non-root eBPF programs")
Fixes: cbd35700 ("bpf: verifier (add ability to receive verification log)")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use memdup_user() helper instead of open-coding to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use memdup_user() helper instead of open-coding to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Recent Chelsio firmware started using few port capablity bits to
manage FEC and as driver was not aware of FEC changes those bits
were zeroed, consequently disabling FEC.

Avoid zeroing those bits and default to whatever the firmware
tells us the Link is currently advertising.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If 'devm_kzalloc' fails, a NULL pointer will be dereferenced.
Return -ENOMEM instead, as done for some other memory allocation just a
few lines above.

Fixes: 98cd1552 ("net: dsa: Mock-up driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have the number of longs, but we need to calculate the number of
bytes required.

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using memcpy() from a string that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. Instead, use strncpy() which will fill the trailing bytes
with zeros.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using memcpy() from a string that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. Instead, use strncpy() which will fill the trailing bytes
with zeros.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using memcpy() from a string that is shorter than the length copied means
the destination buffer is being filled with arbitrary data from the kernel
rodata segment. Instead, use strncpy() which will fill the trailing bytes
with zeros.

This was found with the future CONFIG_FORTIFY_SOURCE feature.

Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vlan devices, like all other software devices, enable
NETIF_F_HW_CSUM feature.  However, unlike all the othe other
software devices, vlans will switch to using IP|IPV6_CSUM
features, if the underlying devices uses them.  In these situations,
checksum offload features on the vlan device can't be controlled
via ethtool.

This patch makes vlans keep HW_CSUM feature if the underlying
device supports checksum offloading.  This makes vlan devices
behave like other software devices, and restores control to the
user.

A side-effect is that some offload settings (typically UFO)
may be enabled on the vlan device while being disabled on the HW.
However, the GSO code will correctly process the packets. This
actually results in slightly better raw throughput.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Congestion control modules that want full control over congestion
control behavior do not want the cwnd modifications controlled by
the sysctl_tcp_slow_start_after_idle code path.
So skip those code paths for CC modules that use the cong_control()
API.
As an example, those cwnd effects are not desired for the BBR congestion
control algorithm.

Fixes: c0402760 ("tcp: new CC hook to set sending rate with rate_sample in any CA state")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv4 dst could use fi->fib_metrics to store metrics but fib_info
itself is refcnt'ed, so without taking a refcnt fi and
fi->fib_metrics could be freed while dst metrics still points to
it. This triggers use-after-free as reported by Andrey twice.

This patch reverts commit 2860583f ("ipv4: Kill rt->fi") to
restore this reference counting. It is a quick fix for -net and
-stable, for -net-next, as Eric suggested, we can consider doing
reference counting for metrics itself instead of relying on fib_info.

IPv6 is very different, it copies or steals the metrics from mx6_config
in fib6_commit_metrics() so probably doesn't need a refcnt.

Decnet has already done the refcnt'ing, see dn_fib_semantic_match().

Fixes: 2860583f ("ipv4: Kill rt->fi")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the crash that happens when driver tries to collect statistics
from already released "aq_vec" object.
If adapter is in "down" state we still allow user to see statistics from HW.

V2: fixed braces around "aq_vec_free".

Fixes: 97bde5c4 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Tested-by: David Arcari <darcari@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace @results_wk with @report_results, which was missed
in an earlier patch between revisions thereof.

Fixes: b34939b9 ("cfg80211: add request id to cfg80211_sched_scan_*() api")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When VHT IBSS support was added, the size of the extra elements
wasn't considered in ieee80211_ibss_build_presp(), which makes
it possible that it would overrun the allocated buffer. Fix it
by allocating the necessary space.

Fixes: abcff6ef ("mac80211: add VHT support for IBSS")
Reported-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Since groups 0 and 63 are invalid, we should check for those bits.
Note that the 802.11 spec specifies the *bit* order, but the CPU
doesn't care about bit order since it can't address bits, so it's
always treating BIT(0) as the lowest bit within a byte.
Reported-by: Jan Fuchs <jan.fuchs@lancom.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

If ieee80211_hw_restart() is called during authentication, the
authentication process will continue, causing the driver to be called
in a wrong state.  This ultimately causes an oops in the iwlwifi
driver (at least).

This fixes bugzilla 195299 partly.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195299Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Somehow I missed this in my RX rate cleanup series, causing some
drivers to not report correct bandwidth since this flag isn't
used by mac80211 anymore. Fix this, and make hwsim also report
higher bandwidths appropriately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>