Merge tag 'fbdev-for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev

Pull fbdev update from Jean-Christophe PLAGNIOL-VILLARD:
 "Various fbdev changes for 3.11
   - xilinxfb updates
   - Small cleanups and fixes to multiple drivers
   - OMAP display subsystem bug updates
   - imxfb dt support"

* tag 'fbdev-for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev: (95 commits)
  video: imxfb: Add DT support
  video: i740fb: Make i740fb_init static
  fb: make fp_get_options name argument const
  video: mmp: fix graphics/video layer enable/mask swap issue
  video: mmp: fix memcpy wrong size for mmp_addr issue
  radeon: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
  aty128fb: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
  video: of_display_timing.h: Declare 'display_timing'
  fbdev: bfin-lq035q1-fb: Use dev_pm_ops
  fbmem: return -EFAULT on copy_to_user() failure
  OMAPDSS: DPI: Fix wrong pixel clock limit
  video: replace strict_strtoul() with kstrtoul()
  uvesafb: Correct/simplify warning message
  fb: fix atyfb unused data warnings
  fb: fix atyfb build warning
  video: imxfb: Make local symbols static
  video: udlfb: Make local symbol static
  video: udlfb: Use NULL instead of 0
  video: smscufx: Use NULL instead of 0
  video: remove unnecessary platform_set_drvdata()
  ...

Documentation/devicetree/bindings/video/fsl,imx-fb.txt

+Freescale imx21 Framebuffer
+
+This framebuffer driver supports devices imx1, imx21, imx25, and imx27.
+
+Required properties:
+- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : One interrupt of the fb dev
+
+Required nodes:
+- display: Phandle to a display node as described in
+	Documentation/devicetree/bindings/video/display-timing.txt
+	Additional, the display node has to define properties:
+	- bits-per-pixel: Bits per pixel
+	- fsl,pcr: LCDC PCR value
+
+Optional properties:
+- fsl,dmacr: DMA Control Register value. This is optional. By default, the
+	register is not modified as recommended by the datasheet.
+- fsl,lscr1: LCDC Sharp Configuration Register value.
+
+Example:
+
+	imxfb: fb@10021000 {
+		compatible = "fsl,imx21-fb";
+		interrupts = <61>;
+		reg = <0x10021000 0x1000>;
+		display = <&display0>;
+	};
+
+	...
+
+	display0: display0 {
+		model = "Primeview-PD050VL1";
+		native-mode = <&timing_disp0>;
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
+		display-timings {
+			timing_disp0: 640x480 {
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <112>;
+				hfront-porch = <36>;
+				hsync-len = <32>;
+				vback-porch = <33>;
+				vfront-porch = <33>;
+				vsync-len = <2>;
+				clock-frequency = <25000000>;
+			};
+		};
+	};

Documentation/devicetree/bindings/video/ssd1307fb.txt

 * Solomon SSD1307 Framebuffer Driver
 
 Required properties:
-  - compatible: Should be "solomon,ssd1307fb-<bus>". The only supported bus for
-    now is i2c.
+  - compatible: Should be "solomon,<chip>fb-<bus>". The only supported bus for
+    now is i2c, and the supported chips are ssd1306 and ssd1307.
   - reg: Should contain address of the controller on the I2C bus. Most likely
          0x3c or 0x3d
   - pwm: Should contain the pwm to use according to the OF device tree PWM
-         specification [0]
+         specification [0]. Only required for the ssd1307.
   - reset-gpios: Should contain the GPIO used to reset the OLED display
+  - solomon,height: Height in pixel of the screen driven by the controller
+  - solomon,width: Width in pixel of the screen driven by the controller
+  - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is
+    mapped to.
 
 Optional properties:
   - reset-active-low: Is the reset gpio is active on physical low?

drivers/gpu/drm/omapdrm/omap_crtc.c

@@ -40,7 +40,7 @@ struct omap_crtc {
 	 * mgr->id.)  Eventually this will be replaced w/ something
 	 * more common-panel-framework-y
 	 */
-	struct omap_overlay_manager mgr;
+	struct omap_overlay_manager *mgr;
 
 	struct omap_video_timings timings;
 	bool enabled;
@@ -90,7 +90,32 @@ uint32_t pipe2vbl(struct drm_crtc *crtc)
  * job of sequencing the setup of the video pipe in the proper order
  */
 
+/* ovl-mgr-id -> crtc */
+static struct omap_crtc *omap_crtcs[8];
+
 /* we can probably ignore these until we support command-mode panels: */
+static int omap_crtc_connect(struct omap_overlay_manager *mgr,
+		struct omap_dss_device *dst)
+{
+	if (mgr->output)
+		return -EINVAL;
+
+	if ((mgr->supported_outputs & dst->id) == 0)
+		return -EINVAL;
+
+	dst->manager = mgr;
+	mgr->output = dst;
+
+	return 0;
+}
+
+static void omap_crtc_disconnect(struct omap_overlay_manager *mgr,
+		struct omap_dss_device *dst)
+{
+	mgr->output->manager = NULL;
+	mgr->output = NULL;
+}
+
 static void omap_crtc_start_update(struct omap_overlay_manager *mgr)
 {
 }
@@ -107,7 +132,7 @@ static void omap_crtc_disable(struct omap_overlay_manager *mgr)
 static void omap_crtc_set_timings(struct omap_overlay_manager *mgr,
 		const struct omap_video_timings *timings)
 {
-	struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr);
+	struct omap_crtc *omap_crtc = omap_crtcs[mgr->id];
 	DBG("%s", omap_crtc->name);
 	omap_crtc->timings = *timings;
 	omap_crtc->full_update = true;
@@ -116,7 +141,7 @@ static void omap_crtc_set_timings(struct omap_overlay_manager *mgr,
 static void omap_crtc_set_lcd_config(struct omap_overlay_manager *mgr,
 		const struct dss_lcd_mgr_config *config)
 {
-	struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr);
+	struct omap_crtc *omap_crtc = omap_crtcs[mgr->id];
 	DBG("%s", omap_crtc->name);
 	dispc_mgr_set_lcd_config(omap_crtc->channel, config);
 }
@@ -135,6 +160,8 @@ static void omap_crtc_unregister_framedone_handler(
 }
 
 static const struct dss_mgr_ops mgr_ops = {
+		.connect = omap_crtc_connect,
+		.disconnect = omap_crtc_disconnect,
 		.start_update = omap_crtc_start_update,
 		.enable = omap_crtc_enable,
 		.disable = omap_crtc_disable,
@@ -569,7 +596,7 @@ static void omap_crtc_pre_apply(struct omap_drm_apply *apply)
 	} else {
 		if (encoder) {
 			omap_encoder_set_enabled(encoder, false);
-			omap_encoder_update(encoder, &omap_crtc->mgr,
+			omap_encoder_update(encoder, omap_crtc->mgr,
 					&omap_crtc->timings);
 			omap_encoder_set_enabled(encoder, true);
 			omap_crtc->full_update = false;
@@ -595,6 +622,11 @@ static const char *channel_names[] = {
 		[OMAP_DSS_CHANNEL_LCD2] = "lcd2",
 };
 
+void omap_crtc_pre_init(void)
+{
+	dss_install_mgr_ops(&mgr_ops);
+}
+
 /* initialize crtc */
 struct drm_crtc *omap_crtc_init(struct drm_device *dev,
 		struct drm_plane *plane, enum omap_channel channel, int id)
@@ -635,9 +667,7 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev,
 	omap_irq_register(dev, &omap_crtc->error_irq);
 
 	/* temporary: */
-	omap_crtc->mgr.id = channel;
-
-	dss_install_mgr_ops(&mgr_ops);
+	omap_crtc->mgr = omap_dss_get_overlay_manager(channel);
 
 	/* TODO: fix hard-coded setup.. add properties! */
 	info = &omap_crtc->info;
@@ -651,6 +681,8 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev,
 
 	omap_plane_install_properties(omap_crtc->plane, &crtc->base);
 
+	omap_crtcs[channel] = omap_crtc;
+
 	return crtc;
 
 fail:

drivers/gpu/drm/omapdrm/omap_drv.c

@@ -65,10 +65,8 @@ static int get_connector_type(struct omap_dss_device *dssdev)
 	switch (dssdev->type) {
 	case OMAP_DISPLAY_TYPE_HDMI:
 		return DRM_MODE_CONNECTOR_HDMIA;
-	case OMAP_DISPLAY_TYPE_DPI:
-		if (!strcmp(dssdev->name, "dvi"))
-			return DRM_MODE_CONNECTOR_DVID;
-		/* fallthrough */
+	case OMAP_DISPLAY_TYPE_DVI:
+		return DRM_MODE_CONNECTOR_DVID;
 	default:
 		return DRM_MODE_CONNECTOR_Unknown;
 	}
@@ -97,6 +95,9 @@ static int omap_modeset_init(struct drm_device *dev)
 	int num_mgrs = dss_feat_get_num_mgrs();
 	int num_crtcs;
 	int i, id = 0;
+	int r;
+
+	omap_crtc_pre_init();
 
 	drm_mode_config_init(dev);
 
@@ -116,6 +117,7 @@ static int omap_modeset_init(struct drm_device *dev)
 		struct drm_connector *connector;
 		struct drm_encoder *encoder;
 		enum omap_channel channel;
+		struct omap_overlay_manager *mgr;
 
 		if (!dssdev->driver) {
 			dev_warn(dev->dev, "%s has no driver.. skipping it\n",
@@ -131,6 +133,13 @@ static int omap_modeset_init(struct drm_device *dev)
 			continue;
 		}
 
+		r = dssdev->driver->connect(dssdev);
+		if (r) {
+			dev_err(dev->dev, "could not connect display: %s\n",
+					dssdev->name);
+			continue;
+		}
+
 		encoder = omap_encoder_init(dev, dssdev);
 
 		if (!encoder) {
@@ -172,8 +181,9 @@ static int omap_modeset_init(struct drm_device *dev)
 		 * other possible channels to which the encoder can connect are
 		 * not considered.
 		 */
-		channel = dssdev->output->dispc_channel;
 
+		mgr = omapdss_find_mgr_from_display(dssdev);
+		channel = mgr->id;
 		/*
 		 * if this channel hasn't already been taken by a previously
 		 * allocated crtc, we create a new crtc for it
@@ -247,6 +257,9 @@ static int omap_modeset_init(struct drm_device *dev)
 		struct drm_encoder *encoder = priv->encoders[i];
 		struct omap_dss_device *dssdev =
 					omap_encoder_get_dssdev(encoder);
+		struct omap_dss_device *output;
+
+		output = omapdss_find_output_from_display(dssdev);
 
 		/* figure out which crtc's we can connect the encoder to: */
 		encoder->possible_crtcs = 0;
@@ -259,9 +272,11 @@ static int omap_modeset_init(struct drm_device *dev)
 			supported_outputs =
 				dss_feat_get_supported_outputs(crtc_channel);
 
-			if (supported_outputs & dssdev->output->id)
+			if (supported_outputs & output->id)
 				encoder->possible_crtcs |= (1 << id);
 		}
+
+		omap_dss_put_device(output);
 	}
 
 	DBG("registered %d planes, %d crtcs, %d encoders and %d connectors\n",

drivers/gpu/drm/omapdrm/omap_drv.h

@@ -157,6 +157,7 @@ const struct omap_video_timings *omap_crtc_timings(struct drm_crtc *crtc);
 enum omap_channel omap_crtc_channel(struct drm_crtc *crtc);
 int omap_crtc_apply(struct drm_crtc *crtc,
 		struct omap_drm_apply *apply);
+void omap_crtc_pre_init(void);
 struct drm_crtc *omap_crtc_init(struct drm_device *dev,
 		struct drm_plane *plane, enum omap_channel channel, int id);
 

drivers/video/Kconfig

@@ -367,6 +367,8 @@ config FB_IMX
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
 
 config FB_CYBER2000
 	tristate "CyberPro 2000/2010/5000 support"
@@ -2188,7 +2190,7 @@ config FB_PS3_DEFAULT_SIZE_M
 
 config FB_XILINX
 	tristate "Xilinx frame buffer support"
-	depends on FB && (XILINX_VIRTEX || MICROBLAZE)
+	depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT

drivers/video/aty/aty128fb.c

@@ -2016,7 +2016,7 @@ static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	aty128_init_engine(par);
 
-	par->pm_reg = pci_find_capability(pdev, PCI_CAP_ID_PM);
+	par->pm_reg = pdev->pm_cap;
 	par->pdev = pdev;
 	par->asleep = 0;
 	par->lock_blank = 0;

drivers/video/aty/atyfb_base.c

@@ -58,6 +58,7 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
+#include <linux/compiler.h>
 #include <linux/console.h>
 #include <linux/fb.h>
 #include <linux/init.h>
@@ -434,8 +435,8 @@ static int correct_chipset(struct atyfb_par *par)
 	const char *name;
 	int i;
 
-	for (i = ARRAY_SIZE(aty_chips) - 1; i >= 0; i--)
-		if (par->pci_id == aty_chips[i].pci_id)
+	for (i = ARRAY_SIZE(aty_chips); i > 0; i--)
+		if (par->pci_id == aty_chips[i - 1].pci_id)
 			break;
 
 	if (i < 0)
@@ -531,8 +532,8 @@ static int correct_chipset(struct atyfb_par *par)
 	return 0;
 }
 
-static char ram_dram[] = "DRAM";
-static char ram_resv[] = "RESV";
+static char ram_dram[] __maybe_unused = "DRAM";
+static char ram_resv[] __maybe_unused = "RESV";
 #ifdef CONFIG_FB_ATY_GX
 static char ram_vram[] = "VRAM";
 #endif /* CONFIG_FB_ATY_GX */

drivers/video/aty/radeon_pm.c

@@ -2805,7 +2805,7 @@ static void radeonfb_early_resume(void *data)
 void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlist, int force_sleep)
 {
 	/* Find PM registers in config space if any*/
-	rinfo->pm_reg = pci_find_capability(rinfo->pdev, PCI_CAP_ID_PM);
+	rinfo->pm_reg = rinfo->pdev->pm_cap;
 
 	/* Enable/Disable dynamic clocks: TODO add sysfs access */
 	if (rinfo->family == CHIP_FAMILY_RS480)

drivers/video/au1100fb.c

@@ -577,7 +577,6 @@ static int au1100fb_drv_probe(struct platform_device *dev)
 	if (fbdev->info.cmap.len != 0) {
 		fb_dealloc_cmap(&fbdev->info.cmap);
 	}
-	platform_set_drvdata(dev, NULL);
 
 	return -ENODEV;
 }

drivers/video/bf54x-lq043fb.c

@@ -681,7 +681,6 @@ static int bfin_bf54x_probe(struct platform_device *pdev)
 out2:
 	free_dma(CH_EPPI0);
 out1:
-	platform_set_drvdata(pdev, NULL);
 
 	return ret;
 }

drivers/video/bfin-lq035q1-fb.c

@@ -170,16 +170,19 @@ static int lq035q1_spidev_remove(struct spi_device *spi)
 	return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT);
 }
 
-#ifdef CONFIG_PM
-static int lq035q1_spidev_suspend(struct spi_device *spi, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int lq035q1_spidev_suspend(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
+
 	return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_SHUT);
 }
 
-static int lq035q1_spidev_resume(struct spi_device *spi)
+static int lq035q1_spidev_resume(struct device *dev)
 {
-	int ret;
+	struct spi_device *spi = to_spi_device(dev);
 	struct spi_control *ctl = spi_get_drvdata(spi);
+	int ret;
 
 	ret = lq035q1_control(spi, LQ035_DRIVER_OUTPUT_CTL, ctl->mode);
 	if (ret)
@@ -187,9 +190,13 @@ static int lq035q1_spidev_resume(struct spi_device *spi)
 
 	return lq035q1_control(spi, LQ035_SHUT_CTL, LQ035_ON);
 }
+
+static SIMPLE_DEV_PM_OPS(lq035q1_spidev_pm_ops, lq035q1_spidev_suspend,
+	lq035q1_spidev_resume);
+#define LQ035Q1_SPIDEV_PM_OPS (&lq035q1_spidev_pm_ops)
+
 #else
-# define lq035q1_spidev_suspend NULL
-# define lq035q1_spidev_resume  NULL
+#define LQ035Q1_SPIDEV_PM_OPS NULL
 #endif
 
 /* Power down all displays on reboot, poweroff or halt */
@@ -708,8 +715,7 @@ static int bfin_lq035q1_probe(struct platform_device *pdev)
 	info->spidrv.probe    = lq035q1_spidev_probe;
 	info->spidrv.remove   = lq035q1_spidev_remove;
 	info->spidrv.shutdown = lq035q1_spidev_shutdown;
-	info->spidrv.suspend  = lq035q1_spidev_suspend;
-	info->spidrv.resume   = lq035q1_spidev_resume;
+	info->spidrv.driver.pm = LQ035Q1_SPIDEV_PM_OPS;
 
 	ret = spi_register_driver(&info->spidrv);
 	if (ret < 0) {
@@ -759,7 +765,6 @@ static int bfin_lq035q1_probe(struct platform_device *pdev)
  out2:
 	free_dma(CH_PPI);
  out1:
-	platform_set_drvdata(pdev, NULL);
 
 	return ret;
 }
@@ -788,7 +793,6 @@ static int bfin_lq035q1_remove(struct platform_device *pdev)
 	bfin_lq035q1_free_ports(info->disp_info->ppi_mode ==
 				USE_RGB565_16_BIT_PPI);
 
-	platform_set_drvdata(pdev, NULL);
 	framebuffer_release(fbinfo);
 
 	dev_info(&pdev->dev, "unregistered LCD driver\n");

drivers/video/bfin-t350mcqb-fb.c

@@ -578,7 +578,6 @@ static int bfin_t350mcqb_probe(struct platform_device *pdev)
 out2:
 	free_dma(CH_PPI);
 out1:
-	platform_set_drvdata(pdev, NULL);
 
 	return ret;
 }
@@ -608,7 +607,6 @@ static int bfin_t350mcqb_remove(struct platform_device *pdev)
 
 	bfin_t350mcqb_request_ports(0);
 
-	platform_set_drvdata(pdev, NULL);
 	framebuffer_release(fbinfo);
 
 	printk(KERN_INFO DRIVER_NAME ": Unregister LCD driver.\n");

drivers/video/ep93xx-fb.c

@@ -595,7 +595,6 @@ static int ep93xxfb_probe(struct platform_device *pdev)
 	fb_dealloc_cmap(&info->cmap);
 failed_cmap:
 	kfree(info);
-	platform_set_drvdata(pdev, NULL);
 
 	return err;
 }
@@ -614,7 +613,6 @@ static int ep93xxfb_remove(struct platform_device *pdev)
 		fbi->mach_info->teardown(pdev);
 
 	kfree(info);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }

drivers/video/fbmem.c

@@ -1305,7 +1305,9 @@ static int do_fscreeninfo_to_user(struct fb_fix_screeninfo *fix,
 	err |= copy_to_user(fix32->reserved, fix->reserved,
 			    sizeof(fix->reserved));
 
-	return err;
+	if (err)
+		return -EFAULT;
+	return 0;
 }
 
 static int fb_get_fscreeninfo(struct fb_info *info, unsigned int cmd,
@@ -1881,7 +1883,7 @@ static int ofonly __read_mostly;
  *
  * NOTE: Needed to maintain backwards compatibility
  */
-int fb_get_options(char *name, char **option)
+int fb_get_options(const char *name, char **option)
 {
 	char *opt, *options = NULL;
 	int retval = 0;

drivers/video/fsl-diu-fb.c

@@ -469,7 +469,7 @@ static enum fsl_diu_monitor_port fsl_diu_name_to_port(const char *s)
 	unsigned long val;
 
 	if (s) {
-		if (!strict_strtoul(s, 10, &val) && (val <= 2))
+		if (!kstrtoul(s, 10, &val) && (val <= 2))
 			port = (enum fsl_diu_monitor_port) val;
 		else if (strncmp(s, "lvds", 4) == 0)
 			port = FSL_DIU_PORT_LVDS;
@@ -1853,7 +1853,7 @@ static int __init fsl_diu_setup(char *options)
 		if (!strncmp(opt, "monitor=", 8)) {
 			monitor_port = fsl_diu_name_to_port(opt + 8);
 		} else if (!strncmp(opt, "bpp=", 4)) {
-			if (!strict_strtoul(opt + 4, 10, &val))
+			if (!kstrtoul(opt + 4, 10, &val))
 				default_bpp = val;
 		} else
 			fb_mode = opt;

drivers/video/i740fb.c

@@ -1302,7 +1302,7 @@ static int  __init i740fb_setup(char *options)
 }
 #endif
 
-int __init i740fb_init(void)
+static int __init i740fb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;

drivers/video/jz4740_fb.c

@@ -737,8 +737,6 @@ static int jzfb_remove(struct platform_device *pdev)
 	fb_dealloc_cmap(&jzfb->fb->cmap);
 	jzfb_free_devmem(jzfb);
 
-	platform_set_drvdata(pdev, NULL);
-
 	framebuffer_release(jzfb->fb);
 
 	return 0;

drivers/video/mmp/fb/mmpfb.c

@@ -659,7 +659,6 @@ static int mmpfb_probe(struct platform_device *pdev)
 	mutex_destroy(&fbi->access_ok);
 failed:
 	dev_err(fbi->dev, "mmp-fb: frame buffer device init failed\n");
-	platform_set_drvdata(pdev, NULL);
 
 	framebuffer_release(info);
 

drivers/video/mmp/hw/mmp_ctrl.c

@@ -165,9 +165,9 @@ static void overlay_set_win(struct mmp_overlay *overlay, struct mmp_win *win)
 
 static void dmafetch_onoff(struct mmp_overlay *overlay, int on)
 {
-	u32 mask = overlay_is_vid(overlay) ? CFG_GRA_ENA_MASK :
-		   CFG_DMA_ENA_MASK;
-	u32 enable = overlay_is_vid(overlay) ? CFG_GRA_ENA(1) : CFG_DMA_ENA(1);
+	u32 mask = overlay_is_vid(overlay) ? CFG_DMA_ENA_MASK :
+		   CFG_GRA_ENA_MASK;
+	u32 enable = overlay_is_vid(overlay) ? CFG_DMA_ENA(1) : CFG_GRA_ENA(1);
 	u32 tmp;
 	struct mmp_path *path = overlay->path;
 
@@ -238,7 +238,7 @@ static int overlay_set_addr(struct mmp_overlay *overlay, struct mmp_addr *addr)
 	struct lcd_regs *regs = path_regs(overlay->path);
 
 	/* FIXME: assert addr supported */
-	memcpy(&overlay->addr, addr, sizeof(struct mmp_win));
+	memcpy(&overlay->addr, addr, sizeof(struct mmp_addr));
 	writel(addr->phys[0], &regs->g_0);
 
 	return overlay->addr.phys[0];
@@ -566,7 +566,6 @@ static int mmphw_probe(struct platform_device *pdev)
 		devm_kfree(ctrl->dev, ctrl);
 	}
 
-	platform_set_drvdata(pdev, NULL);
 	dev_err(&pdev->dev, "device init failed\n");
 
 	return ret;

drivers/video/mxsfb.c

@@ -899,7 +899,6 @@ static int mxsfb_probe(struct platform_device *pdev)
 
 	host->base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(host->base)) {
-		dev_err(&pdev->dev, "ioremap failed\n");
 		ret = PTR_ERR(host->base);
 		goto fb_release;
 	}
@@ -986,8 +985,6 @@ static int mxsfb_remove(struct platform_device *pdev)
 
 	framebuffer_release(fb_info);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/video/nuc900fb.c

@@ -707,7 +707,6 @@ static int nuc900fb_remove(struct platform_device *pdev)
 	release_resource(fbi->mem);
 	kfree(fbi->mem);
 
-	platform_set_drvdata(pdev, NULL);
 	framebuffer_release(fbinfo);
 
 	return 0;

drivers/video/of_display_timing.c

@@ -53,21 +53,16 @@ static int parse_timing_property(struct device_node *np, const char *name,
 }
 
 /**
- * of_get_display_timing - parse display_timing entry from device_node
+ * of_parse_display_timing - parse display_timing entry from device_node
  * @np: device_node with the properties
  **/
-static struct display_timing *of_get_display_timing(struct device_node *np)
+static int of_parse_display_timing(struct device_node *np,
+		struct display_timing *dt)
 {
-	struct display_timing *dt;
 	u32 val = 0;
 	int ret = 0;
 
-	dt = kzalloc(sizeof(*dt), GFP_KERNEL);
-	if (!dt) {
-		pr_err("%s: could not allocate display_timing struct\n",
-			of_node_full_name(np));
-		return NULL;
-	}
+	memset(dt, 0, sizeof(*dt));
 
 	ret |= parse_timing_property(np, "hback-porch", &dt->hback_porch);
 	ret |= parse_timing_property(np, "hfront-porch", &dt->hfront_porch);
@@ -101,12 +96,38 @@ static struct display_timing *of_get_display_timing(struct device_node *np)
 	if (ret) {
 		pr_err("%s: error reading timing properties\n",
 			of_node_full_name(np));
-		kfree(dt);
-		return NULL;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * of_get_display_timing - parse a display_timing entry
+ * @np: device_node with the timing subnode
+ * @name: name of the timing node
+ * @dt: display_timing struct to fill
+ **/
+int of_get_display_timing(struct device_node *np, const char *name,
+		struct display_timing *dt)
+{
+	struct device_node *timing_np;
+
+	if (!np) {
+		pr_err("%s: no devicenode given\n", of_node_full_name(np));
+		return -EINVAL;
 	}
 
-	return dt;
+	timing_np = of_find_node_by_name(np, name);
+	if (!timing_np) {
+		pr_err("%s: could not find node '%s'\n",
+			of_node_full_name(np), name);
+		return -ENOENT;
+	}
+
+	return of_parse_display_timing(timing_np, dt);
 }
+EXPORT_SYMBOL_GPL(of_get_display_timing);
 
 /**
  * of_get_display_timings - parse all display_timing entries from a device_node
@@ -174,9 +195,17 @@ struct display_timings *of_get_display_timings(struct device_node *np)
 
 	for_each_child_of_node(timings_np, entry) {
 		struct display_timing *dt;
+		int r;
 
-		dt = of_get_display_timing(entry);
+		dt = kzalloc(sizeof(*dt), GFP_KERNEL);
 		if (!dt) {
+			pr_err("%s: could not allocate display_timing struct\n",
+					of_node_full_name(np));
+			goto timingfail;
+		}
+
+		r = of_parse_display_timing(entry, dt);
+		if (r) {
 			/*
 			 * to not encourage wrong devicetrees, fail in case of
 			 * an error

drivers/video/omap2/Kconfig

@@ -6,5 +6,6 @@ if ARCH_OMAP2PLUS
 source "drivers/video/omap2/dss/Kconfig"
 source "drivers/video/omap2/omapfb/Kconfig"
 source "drivers/video/omap2/displays/Kconfig"
+source "drivers/video/omap2/displays-new/Kconfig"
 
 endif

drivers/video/omap2/Makefile

@@ -2,4 +2,5 @@ obj-$(CONFIG_OMAP2_VRFB) += vrfb.o
 
 obj-$(CONFIG_OMAP2_DSS) += dss/
 obj-y += displays/
+obj-y += displays-new/
 obj-$(CONFIG_FB_OMAP2) += omapfb/

drivers/video/omap2/displays-new/Kconfig

+menu "OMAP Display Device Drivers (new device model)"
+        depends on OMAP2_DSS
+
+config DISPLAY_ENCODER_TFP410
+        tristate "TFP410 DPI to DVI Encoder"
+	help
+	  Driver for TFP410 DPI to DVI encoder.
+
+config DISPLAY_ENCODER_TPD12S015
+        tristate "TPD12S015 HDMI ESD protection and level shifter"
+	help
+	  Driver for TPD12S015, which offers HDMI ESD protection and level
+	  shifting.
+
+config DISPLAY_CONNECTOR_DVI
+        tristate "DVI Connector"
+	depends on I2C
+	help
+	  Driver for a generic DVI connector.
+
+config DISPLAY_CONNECTOR_HDMI
+        tristate "HDMI Connector"
+	help
+	  Driver for a generic HDMI connector.
+
+config DISPLAY_CONNECTOR_ANALOG_TV
+        tristate "Analog TV Connector"
+	help
+	  Driver for a generic analog TV connector.
+
+config DISPLAY_PANEL_DPI
+	tristate "Generic DPI panel"
+	help
+	  Driver for generic DPI panels.
+
+config DISPLAY_PANEL_DSI_CM
+	tristate "Generic DSI Command Mode Panel"
+	help
+	  Driver for generic DSI command mode panels.
+
+config DISPLAY_PANEL_SONY_ACX565AKM
+	tristate "ACX565AKM Panel"
+	depends on SPI && BACKLIGHT_CLASS_DEVICE
+	help
+	  This is the LCD panel used on Nokia N900
+
+config DISPLAY_PANEL_LGPHILIPS_LB035Q02
+	tristate "LG.Philips LB035Q02 LCD Panel"
+	depends on SPI
+	help
+	  LCD Panel used on the Gumstix Overo Palo35
+
+config DISPLAY_PANEL_SHARP_LS037V7DW01
+        tristate "Sharp LS037V7DW01 LCD Panel"
+        depends on BACKLIGHT_CLASS_DEVICE
+        help
+          LCD Panel used in TI's SDP3430 and EVM boards
+
+config DISPLAY_PANEL_TPO_TD043MTEA1
+        tristate "TPO TD043MTEA1 LCD Panel"
+        depends on SPI
+        help
+          LCD Panel used in OMAP3 Pandora
+
+config DISPLAY_PANEL_NEC_NL8048HL11
+	tristate "NEC NL8048HL11 Panel"
+	depends on SPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+		This NEC NL8048HL11 panel is TFT LCD used in the
+		Zoom2/3/3630 sdp boards.
+
+endmenu

drivers/video/omap2/displays-new/Makefile

+obj-$(CONFIG_DISPLAY_ENCODER_TFP410) += encoder-tfp410.o
+obj-$(CONFIG_DISPLAY_ENCODER_TPD12S015) += encoder-tpd12s015.o
+obj-$(CONFIG_DISPLAY_CONNECTOR_DVI) += connector-dvi.o
+obj-$(CONFIG_DISPLAY_CONNECTOR_HDMI) += connector-hdmi.o
+obj-$(CONFIG_DISPLAY_CONNECTOR_ANALOG_TV) += connector-analog-tv.o
+obj-$(CONFIG_DISPLAY_PANEL_DPI) += panel-dpi.o
+obj-$(CONFIG_DISPLAY_PANEL_DSI_CM) += panel-dsi-cm.o
+obj-$(CONFIG_DISPLAY_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
+obj-$(CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
+obj-$(CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+obj-$(CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
+obj-$(CONFIG_DISPLAY_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o

drivers/video/omap2/displays-new/connector-analog-tv.c

+/*
+ * Analog TV Connector driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct device *dev;
+
+	struct omap_video_timings timings;
+
+	enum omap_dss_venc_type connector_type;
+	bool invert_polarity;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int tvc_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(ddata->dev, "connect\n");
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.atv->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void tvc_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(ddata->dev, "disconnect\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.atv->disconnect(in, dssdev);
+}
+
+static int tvc_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(ddata->dev, "enable\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.atv->set_timings(in, &ddata->timings);
+
+	in->ops.atv->set_type(in, ddata->connector_type);
+	in->ops.atv->invert_vid_out_polarity(in, ddata->invert_polarity);
+
+	r = in->ops.atv->enable(in);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return r;
+}
+
+static void tvc_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(ddata->dev, "disable\n");
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	in->ops.atv->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tvc_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.atv->set_timings(in, timings);
+}
+
+static void tvc_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int tvc_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.atv->check_timings(in, timings);
+}
+
+static u32 tvc_get_wss(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.atv->get_wss(in);
+}
+
+static int tvc_set_wss(struct omap_dss_device *dssdev, u32 wss)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.atv->set_wss(in, wss);
+}
+
+static struct omap_dss_driver tvc_driver = {
+	.connect		= tvc_connect,
+	.disconnect		= tvc_disconnect,
+
+	.enable			= tvc_enable,
+	.disable		= tvc_disable,
+
+	.set_timings		= tvc_set_timings,
+	.get_timings		= tvc_get_timings,
+	.check_timings		= tvc_check_timings,
+
+	.get_resolution		= omapdss_default_get_resolution,
+
+	.get_wss		= tvc_get_wss,
+	.set_wss		= tvc_set_wss,
+};
+
+static int tvc_probe_pdata(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct connector_atv_platform_data *pdata;
+	struct omap_dss_device *in, *dssdev;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "Failed to find video source\n");
+		return -ENODEV;
+	}
+
+	ddata->in = in;
+
+	ddata->connector_type = pdata->connector_type;
+	ddata->invert_polarity = ddata->invert_polarity;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int tvc_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+	ddata->dev = &pdev->dev;
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = tvc_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	ddata->timings = omap_dss_pal_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->driver = &tvc_driver;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_VENC;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = omap_dss_pal_timings;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit tvc_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(&ddata->dssdev);
+
+	tvc_disable(dssdev);
+	tvc_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static struct platform_driver tvc_connector_driver = {
+	.probe	= tvc_probe,
+	.remove	= __exit_p(tvc_remove),
+	.driver	= {
+		.name	= "connector-analog-tv",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(tvc_connector_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Analog TV Connector driver");
+MODULE_LICENSE("GPL");

drivers/video/omap2/displays-new/connector-dvi.c

+/*
+ * Generic DVI Connector driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <drm/drm_edid.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+static const struct omap_video_timings dvic_default_timings = {
+	.x_res		= 640,
+	.y_res		= 480,
+
+	.pixel_clock	= 23500,
+
+	.hfp		= 48,
+	.hsw		= 32,
+	.hbp		= 80,
+
+	.vfp		= 3,
+	.vsw		= 4,
+	.vbp		= 7,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
+};
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct omap_video_timings timings;
+
+	struct i2c_adapter *i2c_adapter;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int dvic_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dvi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void dvic_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dvi->disconnect(in, dssdev);
+}
+
+static int dvic_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.dvi->set_timings(in, &ddata->timings);
+
+	r = in->ops.dvi->enable(in);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void dvic_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	in->ops.dvi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void dvic_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dvi->set_timings(in, timings);
+}
+
+static void dvic_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int dvic_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dvi->check_timings(in, timings);
+}
+
+static int dvic_ddc_read(struct i2c_adapter *adapter,
+		unsigned char *buf, u16 count, u8 offset)
+{
+	int r, retries;
+
+	for (retries = 3; retries > 0; retries--) {
+		struct i2c_msg msgs[] = {
+			{
+				.addr   = DDC_ADDR,
+				.flags  = 0,
+				.len    = 1,
+				.buf    = &offset,
+			}, {
+				.addr   = DDC_ADDR,
+				.flags  = I2C_M_RD,
+				.len    = count,
+				.buf    = buf,
+			}
+		};
+
+		r = i2c_transfer(adapter, msgs, 2);
+		if (r == 2)
+			return 0;
+
+		if (r != -EAGAIN)
+			break;
+	}
+
+	return r < 0 ? r : -EIO;
+}
+
+static int dvic_read_edid(struct omap_dss_device *dssdev,
+		u8 *edid, int len)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	int r, l, bytes_read;
+
+	if (!ddata->i2c_adapter)
+		return -ENODEV;
+
+	l = min(EDID_LENGTH, len);
+	r = dvic_ddc_read(ddata->i2c_adapter, edid, l, 0);
+	if (r)
+		return r;
+
+	bytes_read = l;
+
+	/* if there are extensions, read second block */
+	if (len > EDID_LENGTH && edid[0x7e] > 0) {
+		l = min(EDID_LENGTH, len - EDID_LENGTH);
+
+		r = dvic_ddc_read(ddata->i2c_adapter, edid + EDID_LENGTH,
+				l, EDID_LENGTH);
+		if (r)
+			return r;
+
+		bytes_read += l;
+	}
+
+	return bytes_read;
+}
+
+static bool dvic_detect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	unsigned char out;
+	int r;
+
+	if (!ddata->i2c_adapter)
+		return true;
+
+	r = dvic_ddc_read(ddata->i2c_adapter, &out, 1, 0);
+
+	return r == 0;
+}
+
+static struct omap_dss_driver dvic_driver = {
+	.connect	= dvic_connect,
+	.disconnect	= dvic_disconnect,
+
+	.enable		= dvic_enable,
+	.disable	= dvic_disable,
+
+	.set_timings	= dvic_set_timings,
+	.get_timings	= dvic_get_timings,
+	.check_timings	= dvic_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+
+	.read_edid	= dvic_read_edid,
+	.detect		= dvic_detect,
+};
+
+static int dvic_probe_pdata(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct connector_dvi_platform_data *pdata;
+	struct omap_dss_device *in, *dssdev;
+	int i2c_bus_num;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	i2c_bus_num = pdata->i2c_bus_num;
+
+	if (i2c_bus_num != -1) {
+		struct i2c_adapter *adapter;
+
+		adapter = i2c_get_adapter(i2c_bus_num);
+		if (!adapter) {
+			dev_err(&pdev->dev,
+					"Failed to get I2C adapter, bus %d\n",
+					i2c_bus_num);
+			return -EPROBE_DEFER;
+		}
+
+		ddata->i2c_adapter = adapter;
+	}
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "Failed to find video source\n");
+		return -ENODEV;
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int dvic_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = dvic_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	ddata->timings = dvic_default_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->driver = &dvic_driver;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_DVI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = dvic_default_timings;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit dvic_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(&ddata->dssdev);
+
+	dvic_disable(dssdev);
+	dvic_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	if (ddata->i2c_adapter)
+		i2c_put_adapter(ddata->i2c_adapter);
+
+	return 0;
+}
+
+static struct platform_driver dvi_connector_driver = {
+	.probe	= dvic_probe,
+	.remove	= __exit_p(dvic_remove),
+	.driver	= {
+		.name	= "connector-dvi",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(dvi_connector_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Generic DVI Connector driver");
+MODULE_LICENSE("GPL");

drivers/video/omap2/displays-new/connector-hdmi.c

+/*
+ * HDMI Connector driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <drm/drm_edid.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+static const struct omap_video_timings hdmic_default_timings = {
+	.x_res		= 640,
+	.y_res		= 480,
+	.pixel_clock	= 25175,
+	.hsw		= 96,
+	.hfp		= 16,
+	.hbp		= 48,
+	.vsw		= 2,
+	.vfp		= 11,
+	.vbp		= 31,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+
+	.interlace	= false,
+};
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct device *dev;
+
+	struct omap_video_timings timings;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int hdmic_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(ddata->dev, "connect\n");
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.hdmi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void hdmic_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(ddata->dev, "disconnect\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.hdmi->disconnect(in, dssdev);
+}
+
+static int hdmic_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(ddata->dev, "enable\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.hdmi->set_timings(in, &ddata->timings);
+
+	r = in->ops.hdmi->enable(in);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return r;
+}
+
+static void hdmic_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(ddata->dev, "disable\n");
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	in->ops.hdmi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void hdmic_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.hdmi->set_timings(in, timings);
+}
+
+static void hdmic_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int hdmic_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->check_timings(in, timings);
+}
+
+static int hdmic_read_edid(struct omap_dss_device *dssdev,
+		u8 *edid, int len)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->read_edid(in, edid, len);
+}
+
+static bool hdmic_detect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->detect(in);
+}
+
+static int hdmic_audio_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	/* enable audio only if the display is active */
+	if (!omapdss_device_is_enabled(dssdev))
+		return -EPERM;
+
+	r = in->ops.hdmi->audio_enable(in);
+	if (r)
+		return r;
+
+	dssdev->audio_state = OMAP_DSS_AUDIO_ENABLED;
+
+	return 0;
+}
+
+static void hdmic_audio_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	in->ops.hdmi->audio_disable(in);
+
+	dssdev->audio_state = OMAP_DSS_AUDIO_DISABLED;
+}
+
+static int hdmic_audio_start(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	/*
+	 * No need to check the panel state. It was checked when trasitioning
+	 * to AUDIO_ENABLED.
+	 */
+	if (dssdev->audio_state != OMAP_DSS_AUDIO_ENABLED)
+		return -EPERM;
+
+	r = in->ops.hdmi->audio_start(in);
+	if (r)
+		return r;
+
+	dssdev->audio_state = OMAP_DSS_AUDIO_PLAYING;
+
+	return 0;
+}
+
+static void hdmic_audio_stop(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	in->ops.hdmi->audio_stop(in);
+
+	dssdev->audio_state = OMAP_DSS_AUDIO_ENABLED;
+}
+
+static bool hdmic_audio_supported(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return false;
+
+	return in->ops.hdmi->audio_supported(in);
+}
+
+static int hdmic_audio_config(struct omap_dss_device *dssdev,
+		struct omap_dss_audio *audio)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	/* config audio only if the display is active */
+	if (!omapdss_device_is_enabled(dssdev))
+		return -EPERM;
+
+	r = in->ops.hdmi->audio_config(in, audio);
+	if (r)
+		return r;
+
+	dssdev->audio_state = OMAP_DSS_AUDIO_CONFIGURED;
+
+	return 0;
+}
+
+static struct omap_dss_driver hdmic_driver = {
+	.connect		= hdmic_connect,
+	.disconnect		= hdmic_disconnect,
+
+	.enable			= hdmic_enable,
+	.disable		= hdmic_disable,
+
+	.set_timings		= hdmic_set_timings,
+	.get_timings		= hdmic_get_timings,
+	.check_timings		= hdmic_check_timings,
+
+	.get_resolution		= omapdss_default_get_resolution,
+
+	.read_edid		= hdmic_read_edid,
+	.detect			= hdmic_detect,
+
+	.audio_enable		= hdmic_audio_enable,
+	.audio_disable		= hdmic_audio_disable,
+	.audio_start		= hdmic_audio_start,
+	.audio_stop		= hdmic_audio_stop,
+	.audio_supported	= hdmic_audio_supported,
+	.audio_config		= hdmic_audio_config,
+};
+
+static int hdmic_probe_pdata(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct connector_hdmi_platform_data *pdata;
+	struct omap_dss_device *in, *dssdev;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "Failed to find video source\n");
+		return -ENODEV;
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int hdmic_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+	ddata->dev = &pdev->dev;
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = hdmic_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	ddata->timings = hdmic_default_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->driver = &hdmic_driver;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = hdmic_default_timings;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit hdmic_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(&ddata->dssdev);
+
+	hdmic_disable(dssdev);
+	hdmic_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static struct platform_driver hdmi_connector_driver = {
+	.probe	= hdmic_probe,
+	.remove	= __exit_p(hdmic_remove),
+	.driver	= {
+		.name	= "connector-hdmi",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(hdmi_connector_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("HDMI Connector driver");
+MODULE_LICENSE("GPL");

drivers/video/omap2/displays-new/encoder-tfp410.c

+/*
+ * TFP410 DPI-to-DVI encoder driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	int pd_gpio;
+	int data_lines;
+
+	struct omap_video_timings timings;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int tfp410_connect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return -EBUSY;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	dst->output = dssdev;
+	dssdev->device = dst;
+
+	return 0;
+}
+
+static void tfp410_disconnect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	WARN_ON(!omapdss_device_is_connected(dssdev));
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	WARN_ON(dst != dssdev->device);
+	if (dst != dssdev->device)
+		return;
+
+	dst->output = NULL;
+	dssdev->device = NULL;
+
+	in->ops.dpi->disconnect(in, &ddata->dssdev);
+}
+
+static int tfp410_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.dpi->set_timings(in, &ddata->timings);
+	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_set_value_cansleep(ddata->pd_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void tfp410_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_set_value_cansleep(ddata->pd_gpio, 0);
+
+	in->ops.dpi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tfp410_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void tfp410_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int tfp410_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static const struct omapdss_dvi_ops tfp410_dvi_ops = {
+	.connect	= tfp410_connect,
+	.disconnect	= tfp410_disconnect,
+
+	.enable		= tfp410_enable,
+	.disable	= tfp410_disable,
+
+	.check_timings	= tfp410_check_timings,
+	.set_timings	= tfp410_set_timings,
+	.get_timings	= tfp410_get_timings,
+};
+
+static int tfp410_probe_pdata(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct encoder_tfp410_platform_data *pdata;
+	struct omap_dss_device *dssdev, *in;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	ddata->pd_gpio = pdata->power_down_gpio;
+
+	ddata->data_lines = pdata->data_lines;
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "Failed to find video source\n");
+		return -ENODEV;
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int tfp410_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = tfp410_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->pd_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->pd_gpio,
+				GPIOF_OUT_INIT_LOW, "tfp410 PD");
+		if (r) {
+			dev_err(&pdev->dev, "Failed to request PD GPIO %d\n",
+					ddata->pd_gpio);
+			goto err_gpio;
+		}
+	}
+
+	dssdev = &ddata->dssdev;
+	dssdev->ops.dvi = &tfp410_dvi_ops;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->output_type = OMAP_DISPLAY_TYPE_DVI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+	r = omapdss_register_output(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register output\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit tfp410_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_output(&ddata->dssdev);
+
+	WARN_ON(omapdss_device_is_enabled(dssdev));
+	if (omapdss_device_is_enabled(dssdev))
+		tfp410_disable(dssdev);
+
+	WARN_ON(omapdss_device_is_connected(dssdev));
+	if (omapdss_device_is_connected(dssdev))
+		tfp410_disconnect(dssdev, dssdev->device);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static struct platform_driver tfp410_driver = {
+	.probe	= tfp410_probe,
+	.remove	= __exit_p(tfp410_remove),
+	.driver	= {
+		.name	= "tfp410",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(tfp410_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("TFP410 DPI to DVI encoder driver");
+MODULE_LICENSE("GPL");

drivers/video/omap2/displays-new/encoder-tpd12s015.c

+/*
+ * TPD12S015 HDMI ESD protection & level shifter chip driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	int ct_cp_hpd_gpio;
+	int ls_oe_gpio;
+	int hpd_gpio;
+
+	struct omap_video_timings timings;
+
+	struct completion hpd_completion;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static irqreturn_t tpd_hpd_irq_handler(int irq, void *data)
+{
+	struct panel_drv_data *ddata = data;
+	bool hpd;
+
+	hpd = gpio_get_value_cansleep(ddata->hpd_gpio);
+
+	dev_dbg(ddata->dssdev.dev, "hpd %d\n", hpd);
+
+	if (gpio_is_valid(ddata->ls_oe_gpio)) {
+		if (hpd)
+			gpio_set_value_cansleep(ddata->ls_oe_gpio, 1);
+		else
+			gpio_set_value_cansleep(ddata->ls_oe_gpio, 0);
+	}
+
+	complete_all(&ddata->hpd_completion);
+
+	return IRQ_HANDLED;
+}
+
+static int tpd_connect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	r = in->ops.hdmi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	dst->output = dssdev;
+	dssdev->device = dst;
+
+	INIT_COMPLETION(ddata->hpd_completion);
+
+	gpio_set_value_cansleep(ddata->ct_cp_hpd_gpio, 1);
+	/* DC-DC converter needs at max 300us to get to 90% of 5V */
+	udelay(300);
+
+	/*
+	 * If there's a cable connected, wait for the hpd irq to trigger,
+	 * which turns on the level shifters.
+	 */
+	if (gpio_get_value_cansleep(ddata->hpd_gpio)) {
+		unsigned long to;
+		to = wait_for_completion_timeout(&ddata->hpd_completion,
+				msecs_to_jiffies(250));
+		WARN_ON_ONCE(to == 0);
+	}
+
+	return 0;
+}
+
+static void tpd_disconnect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	WARN_ON(dst != dssdev->device);
+
+	if (dst != dssdev->device)
+		return;
+
+	gpio_set_value_cansleep(ddata->ct_cp_hpd_gpio, 0);
+
+	dst->output = NULL;
+	dssdev->device = NULL;
+
+	in->ops.hdmi->disconnect(in, &ddata->dssdev);
+}
+
+static int tpd_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+		return 0;
+
+	in->ops.hdmi->set_timings(in, &ddata->timings);
+
+	r = in->ops.hdmi->enable(in);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return r;
+}
+
+static void tpd_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		return;
+
+	in->ops.hdmi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tpd_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.hdmi->set_timings(in, timings);
+}
+
+static void tpd_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int tpd_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	r = in->ops.hdmi->check_timings(in, timings);
+
+	return r;
+}
+
+static int tpd_read_edid(struct omap_dss_device *dssdev,
+		u8 *edid, int len)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!gpio_get_value_cansleep(ddata->hpd_gpio))
+		return -ENODEV;
+
+	return in->ops.hdmi->read_edid(in, edid, len);
+}
+
+static bool tpd_detect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	return gpio_get_value_cansleep(ddata->hpd_gpio);
+}
+
+static int tpd_audio_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->audio_enable(in);
+}
+
+static void tpd_audio_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	in->ops.hdmi->audio_disable(in);
+}
+
+static int tpd_audio_start(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->audio_start(in);
+}
+
+static void tpd_audio_stop(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	in->ops.hdmi->audio_stop(in);
+}
+
+static bool tpd_audio_supported(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->audio_supported(in);
+}
+
+static int tpd_audio_config(struct omap_dss_device *dssdev,
+		struct omap_dss_audio *audio)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->audio_config(in, audio);
+}
+
+static const struct omapdss_hdmi_ops tpd_hdmi_ops = {
+	.connect		= tpd_connect,
+	.disconnect		= tpd_disconnect,
+
+	.enable			= tpd_enable,
+	.disable		= tpd_disable,
+
+	.check_timings		= tpd_check_timings,
+	.set_timings		= tpd_set_timings,
+	.get_timings		= tpd_get_timings,
+
+	.read_edid		= tpd_read_edid,
+	.detect			= tpd_detect,
+
+	.audio_enable		= tpd_audio_enable,
+	.audio_disable		= tpd_audio_disable,
+	.audio_start		= tpd_audio_start,
+	.audio_stop		= tpd_audio_stop,
+	.audio_supported	= tpd_audio_supported,
+	.audio_config		= tpd_audio_config,
+};
+
+static int tpd_probe_pdata(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct encoder_tpd12s015_platform_data *pdata;
+	struct omap_dss_device *dssdev, *in;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	ddata->ct_cp_hpd_gpio = pdata->ct_cp_hpd_gpio;
+	ddata->ls_oe_gpio = pdata->ls_oe_gpio;
+	ddata->hpd_gpio = pdata->hpd_gpio;
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "Failed to find video source\n");
+		return -ENODEV;
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int tpd_probe(struct platform_device *pdev)
+{
+	struct omap_dss_device *in, *dssdev;
+	struct panel_drv_data *ddata;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	init_completion(&ddata->hpd_completion);
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = tpd_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	r = devm_gpio_request_one(&pdev->dev, ddata->ct_cp_hpd_gpio,
+			GPIOF_OUT_INIT_LOW, "hdmi_ct_cp_hpd");
+	if (r)
+		goto err_gpio;
+
+	if (gpio_is_valid(ddata->ls_oe_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->ls_oe_gpio,
+				GPIOF_OUT_INIT_LOW, "hdmi_ls_oe");
+		if (r)
+			goto err_gpio;
+	}
+
+	r = devm_gpio_request_one(&pdev->dev, ddata->hpd_gpio,
+			GPIOF_DIR_IN, "hdmi_hpd");
+	if (r)
+		goto err_gpio;
+
+	r = devm_request_threaded_irq(&pdev->dev, gpio_to_irq(ddata->hpd_gpio),
+				 NULL, tpd_hpd_irq_handler,
+				 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+				 IRQF_ONESHOT, "hpd", ddata);
+	if (r)
+		goto err_irq;
+
+	dssdev = &ddata->dssdev;
+	dssdev->ops.hdmi = &tpd_hdmi_ops;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
+	dssdev->output_type = OMAP_DISPLAY_TYPE_HDMI;
+	dssdev->owner = THIS_MODULE;
+
+	in = ddata->in;
+
+	r = omapdss_register_output(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register output\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+err_irq:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit tpd_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_output(&ddata->dssdev);
+
+	WARN_ON(omapdss_device_is_enabled(dssdev));
+	if (omapdss_device_is_enabled(dssdev))
+		tpd_disable(dssdev);
+
+	WARN_ON(omapdss_device_is_connected(dssdev));
+	if (omapdss_device_is_connected(dssdev))
+		tpd_disconnect(dssdev, dssdev->device);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static struct platform_driver tpd_driver = {
+	.probe	= tpd_probe,
+	.remove	= __exit_p(tpd_remove),
+	.driver	= {
+		.name	= "tpd12s015",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(tpd_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("TPD12S015 driver");
+MODULE_LICENSE("GPL");

drivers/video/omap2/displays-new/panel-dpi.c

+/*
+ * Generic MIPI DPI Panel Driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	int data_lines;
+
+	struct omap_video_timings videomode;
+
+	int backlight_gpio;
+	int enable_gpio;
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int panel_dpi_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void panel_dpi_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int panel_dpi_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	if (gpio_is_valid(ddata->enable_gpio))
+		gpio_set_value_cansleep(ddata->enable_gpio, 1);
+
+	if (gpio_is_valid(ddata->backlight_gpio))
+		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void panel_dpi_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (gpio_is_valid(ddata->enable_gpio))
+		gpio_set_value_cansleep(ddata->enable_gpio, 0);
+
+	if (gpio_is_valid(ddata->backlight_gpio))
+		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
+
+	in->ops.dpi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void panel_dpi_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void panel_dpi_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int panel_dpi_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver panel_dpi_ops = {
+	.connect	= panel_dpi_connect,
+	.disconnect	= panel_dpi_disconnect,
+
+	.enable		= panel_dpi_enable,
+	.disable	= panel_dpi_disable,
+
+	.set_timings	= panel_dpi_set_timings,
+	.get_timings	= panel_dpi_get_timings,
+	.check_timings	= panel_dpi_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+static int panel_dpi_probe_pdata(struct platform_device *pdev)
+{
+	const struct panel_dpi_platform_data *pdata;
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev, *in;
+	struct videomode vm;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	ddata->data_lines = pdata->data_lines;
+
+	videomode_from_timing(pdata->display_timing, &vm);
+	videomode_to_omap_video_timings(&vm, &ddata->videomode);
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	ddata->enable_gpio = pdata->enable_gpio;
+	ddata->backlight_gpio = pdata->backlight_gpio;
+
+	return 0;
+}
+
+static int panel_dpi_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = panel_dpi_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->enable_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->enable_gpio,
+				GPIOF_OUT_INIT_LOW, "panel enable");
+		if (r)
+			goto err_gpio;
+	}
+
+	if (gpio_is_valid(ddata->backlight_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->backlight_gpio,
+				GPIOF_OUT_INIT_LOW, "panel backlight");
+		if (r)
+			goto err_gpio;
+	}
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &pdev->dev;
+	dssdev->driver = &panel_dpi_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+	dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit panel_dpi_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(dssdev);
+
+	panel_dpi_disable(dssdev);
+	panel_dpi_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static struct platform_driver panel_dpi_driver = {
+	.probe = panel_dpi_probe,
+	.remove = __exit_p(panel_dpi_remove),
+	.driver = {
+		.name = "panel-dpi",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(panel_dpi_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Generic MIPI DPI Panel Driver");
+MODULE_LICENSE("GPL");

drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c

+/*
+ * LG.Philips LB035Q02 LCD Panel driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ * Based on a driver by: Steve Sakoman <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+static struct omap_video_timings lb035q02_timings = {
+	.x_res = 320,
+	.y_res = 240,
+
+	.pixel_clock	= 6500,
+
+	.hsw		= 2,
+	.hfp		= 20,
+	.hbp		= 68,
+
+	.vsw		= 2,
+	.vfp		= 4,
+	.vbp		= 18,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
+};
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct spi_device *spi;
+
+	int data_lines;
+
+	struct omap_video_timings videomode;
+
+	int reset_gpio;
+	int backlight_gpio;
+	int enable_gpio;
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int lb035q02_write_reg(struct spi_device *spi, u8 reg, u16 val)
+{
+	struct spi_message msg;
+	struct spi_transfer index_xfer = {
+		.len		= 3,
+		.cs_change	= 1,
+	};
+	struct spi_transfer value_xfer = {
+		.len		= 3,
+	};
+	u8	buffer[16];
+
+	spi_message_init(&msg);
+
+	/* register index */
+	buffer[0] = 0x70;
+	buffer[1] = 0x00;
+	buffer[2] = reg & 0x7f;
+	index_xfer.tx_buf = buffer;
+	spi_message_add_tail(&index_xfer, &msg);
+
+	/* register value */
+	buffer[4] = 0x72;
+	buffer[5] = val >> 8;
+	buffer[6] = val;
+	value_xfer.tx_buf = buffer + 4;
+	spi_message_add_tail(&value_xfer, &msg);
+
+	return spi_sync(spi, &msg);
+}
+
+static void init_lb035q02_panel(struct spi_device *spi)
+{
+	/* Init sequence from page 28 of the lb035q02 spec */
+	lb035q02_write_reg(spi, 0x01, 0x6300);
+	lb035q02_write_reg(spi, 0x02, 0x0200);
+	lb035q02_write_reg(spi, 0x03, 0x0177);
+	lb035q02_write_reg(spi, 0x04, 0x04c7);
+	lb035q02_write_reg(spi, 0x05, 0xffc0);
+	lb035q02_write_reg(spi, 0x06, 0xe806);
+	lb035q02_write_reg(spi, 0x0a, 0x4008);
+	lb035q02_write_reg(spi, 0x0b, 0x0000);
+	lb035q02_write_reg(spi, 0x0d, 0x0030);
+	lb035q02_write_reg(spi, 0x0e, 0x2800);
+	lb035q02_write_reg(spi, 0x0f, 0x0000);
+	lb035q02_write_reg(spi, 0x16, 0x9f80);
+	lb035q02_write_reg(spi, 0x17, 0x0a0f);
+	lb035q02_write_reg(spi, 0x1e, 0x00c1);
+	lb035q02_write_reg(spi, 0x30, 0x0300);
+	lb035q02_write_reg(spi, 0x31, 0x0007);
+	lb035q02_write_reg(spi, 0x32, 0x0000);
+	lb035q02_write_reg(spi, 0x33, 0x0000);
+	lb035q02_write_reg(spi, 0x34, 0x0707);
+	lb035q02_write_reg(spi, 0x35, 0x0004);
+	lb035q02_write_reg(spi, 0x36, 0x0302);
+	lb035q02_write_reg(spi, 0x37, 0x0202);
+	lb035q02_write_reg(spi, 0x3a, 0x0a0d);
+	lb035q02_write_reg(spi, 0x3b, 0x0806);
+}
+
+static int lb035q02_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	init_lb035q02_panel(ddata->spi);
+
+	return 0;
+}
+
+static void lb035q02_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int lb035q02_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	if (gpio_is_valid(ddata->enable_gpio))
+		gpio_set_value_cansleep(ddata->enable_gpio, 1);
+
+	if (gpio_is_valid(ddata->backlight_gpio))
+		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void lb035q02_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (gpio_is_valid(ddata->enable_gpio))
+		gpio_set_value_cansleep(ddata->enable_gpio, 0);
+
+	if (gpio_is_valid(ddata->backlight_gpio))
+		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
+
+	in->ops.dpi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void lb035q02_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void lb035q02_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int lb035q02_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver lb035q02_ops = {
+	.connect	= lb035q02_connect,
+	.disconnect	= lb035q02_disconnect,
+
+	.enable		= lb035q02_enable,
+	.disable	= lb035q02_disable,
+
+	.set_timings	= lb035q02_set_timings,
+	.get_timings	= lb035q02_get_timings,
+	.check_timings	= lb035q02_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+static int lb035q02_probe_pdata(struct spi_device *spi)
+{
+	const struct panel_lb035q02_platform_data *pdata;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev, *in;
+
+	pdata = dev_get_platdata(&spi->dev);
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&spi->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	ddata->data_lines = pdata->data_lines;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	ddata->enable_gpio = pdata->enable_gpio;
+	ddata->backlight_gpio = pdata->backlight_gpio;
+
+	return 0;
+}
+
+static int lb035q02_panel_spi_probe(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, ddata);
+
+	ddata->spi = spi;
+
+	if (dev_get_platdata(&spi->dev)) {
+		r = lb035q02_probe_pdata(spi);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->enable_gpio)) {
+		r = devm_gpio_request_one(&spi->dev, ddata->enable_gpio,
+				GPIOF_OUT_INIT_LOW, "panel enable");
+		if (r)
+			goto err_gpio;
+	}
+
+	if (gpio_is_valid(ddata->backlight_gpio)) {
+		r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
+				GPIOF_OUT_INIT_LOW, "panel backlight");
+		if (r)
+			goto err_gpio;
+	}
+
+	ddata->videomode = lb035q02_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &spi->dev;
+	dssdev->driver = &lb035q02_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+	dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&spi->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int lb035q02_panel_spi_remove(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(dssdev);
+
+	lb035q02_disable(dssdev);
+	lb035q02_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static struct spi_driver lb035q02_spi_driver = {
+	.probe		= lb035q02_panel_spi_probe,
+	.remove		= lb035q02_panel_spi_remove,
+	.driver		= {
+		.name	= "panel_lgphilips_lb035q02",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_spi_driver(lb035q02_spi_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
+MODULE_LICENSE("GPL");

drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c

+/*
+ * LCD panel driver for Sharp LS037V7DW01
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	int data_lines;
+
+	struct omap_video_timings videomode;
+
+	int resb_gpio;
+	int ini_gpio;
+	int mo_gpio;
+	int lr_gpio;
+	int ud_gpio;
+};
+
+static const struct omap_video_timings sharp_ls_timings = {
+	.x_res = 480,
+	.y_res = 640,
+
+	.pixel_clock	= 19200,
+
+	.hsw		= 2,
+	.hfp		= 1,
+	.hbp		= 28,
+
+	.vsw		= 1,
+	.vfp		= 1,
+	.vbp		= 1,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int sharp_ls_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void sharp_ls_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int sharp_ls_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	/* wait couple of vsyncs until enabling the LCD */
+	msleep(50);
+
+	if (gpio_is_valid(ddata->resb_gpio))
+		gpio_set_value_cansleep(ddata->resb_gpio, 1);
+
+	if (gpio_is_valid(ddata->ini_gpio))
+		gpio_set_value_cansleep(ddata->ini_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void sharp_ls_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (gpio_is_valid(ddata->ini_gpio))
+		gpio_set_value_cansleep(ddata->ini_gpio, 0);
+
+	if (gpio_is_valid(ddata->resb_gpio))
+		gpio_set_value_cansleep(ddata->resb_gpio, 0);
+
+	/* wait at least 5 vsyncs after disabling the LCD */
+
+	msleep(100);
+
+	in->ops.dpi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void sharp_ls_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void sharp_ls_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int sharp_ls_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver sharp_ls_ops = {
+	.connect	= sharp_ls_connect,
+	.disconnect	= sharp_ls_disconnect,
+
+	.enable		= sharp_ls_enable,
+	.disable	= sharp_ls_disable,
+
+	.set_timings	= sharp_ls_set_timings,
+	.get_timings	= sharp_ls_get_timings,
+	.check_timings	= sharp_ls_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+static int sharp_ls_probe_pdata(struct platform_device *pdev)
+{
+	const struct panel_sharp_ls037v7dw01_platform_data *pdata;
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev, *in;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	ddata->data_lines = pdata->data_lines;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	ddata->resb_gpio = pdata->resb_gpio;
+	ddata->ini_gpio = pdata->ini_gpio;
+	ddata->mo_gpio = pdata->mo_gpio;
+	ddata->lr_gpio = pdata->lr_gpio;
+	ddata->ud_gpio = pdata->ud_gpio;
+
+	return 0;
+}
+
+static int sharp_ls_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = sharp_ls_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->mo_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->mo_gpio,
+				GPIOF_OUT_INIT_LOW, "lcd MO");
+		if (r)
+			goto err_gpio;
+	}
+
+	if (gpio_is_valid(ddata->lr_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->lr_gpio,
+				GPIOF_OUT_INIT_HIGH, "lcd LR");
+		if (r)
+			goto err_gpio;
+	}
+
+	if (gpio_is_valid(ddata->ud_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->ud_gpio,
+				GPIOF_OUT_INIT_HIGH, "lcd UD");
+		if (r)
+			goto err_gpio;
+	}
+
+	if (gpio_is_valid(ddata->resb_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->resb_gpio,
+				GPIOF_OUT_INIT_LOW, "lcd RESB");
+		if (r)
+			goto err_gpio;
+	}
+
+	if (gpio_is_valid(ddata->ini_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->ini_gpio,
+				GPIOF_OUT_INIT_LOW, "lcd INI");
+		if (r)
+			goto err_gpio;
+	}
+
+	ddata->videomode = sharp_ls_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &pdev->dev;
+	dssdev->driver = &sharp_ls_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+	dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit sharp_ls_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(dssdev);
+
+	sharp_ls_disable(dssdev);
+	sharp_ls_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static struct platform_driver sharp_ls_driver = {
+	.probe = sharp_ls_probe,
+	.remove = __exit_p(sharp_ls_remove),
+	.driver = {
+		.name = "panel-sharp-ls037v7dw01",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(sharp_ls_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Sharp LS037V7DW01 Panel Driver");
+MODULE_LICENSE("GPL");

drivers/video/omap2/displays/Kconfig

-menu "OMAP2/3 Display Device Drivers"
+menu "OMAP2/3 Display Device Drivers (old device model)"
         depends on OMAP2_DSS
 
 config PANEL_GENERIC_DPI