wl18xx: fix boot process in high temperature environment

In addition to existing WCS PLL configuration add and enable
also the coex PLL during init phase. This fixes boot failures
due to silicon latchup in high temperature environment (>85c).
Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Nadim Zubidat <nadimz@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>

drivers/net/wireless/ti/wl18xx/main.c

@@ -623,6 +623,18 @@ static const int wl18xx_rtable[REG_TABLE_LEN] = {
 	[REG_RAW_FW_STATUS_ADDR]	= WL18XX_FW_STATUS_ADDR,
 };
 
+static const struct wl18xx_clk_cfg wl18xx_clk_table_coex[NUM_CLOCK_CONFIGS] = {
+	[CLOCK_CONFIG_16_2_M]	= { 8,  121, 0, 0, false },
+	[CLOCK_CONFIG_16_368_M]	= { 8,  120, 0, 0, false },
+	[CLOCK_CONFIG_16_8_M]	= { 8,  117, 0, 0, false },
+	[CLOCK_CONFIG_19_2_M]	= { 10, 128, 0, 0, false },
+	[CLOCK_CONFIG_26_M]	= { 11, 104, 0, 0, false },
+	[CLOCK_CONFIG_32_736_M]	= { 8,  120, 0, 0, false },
+	[CLOCK_CONFIG_33_6_M]	= { 8,  117, 0, 0, false },
+	[CLOCK_CONFIG_38_468_M]	= { 10, 128, 0, 0, false },
+	[CLOCK_CONFIG_52_M]	= { 11, 104, 0, 0, false },
+};
+
 static const struct wl18xx_clk_cfg wl18xx_clk_table[NUM_CLOCK_CONFIGS] = {
 	[CLOCK_CONFIG_16_2_M]	= { 7,  104,  801, 4,  true },
 	[CLOCK_CONFIG_16_368_M]	= { 9,  132, 3751, 4,  true },
@@ -704,6 +716,23 @@ static int wl18xx_set_clk(struct wl1271 *wl)
 		     wl18xx_clk_table[clk_freq].p, wl18xx_clk_table[clk_freq].q,
 		     wl18xx_clk_table[clk_freq].swallow ? "swallow" : "spit");
 
+	/* coex PLL configuration */
+	ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_N,
+				   wl18xx_clk_table_coex[clk_freq].n);
+	if (ret < 0)
+		goto out;
+
+	ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_M,
+				   wl18xx_clk_table_coex[clk_freq].m);
+	if (ret < 0)
+		goto out;
+
+	/* bypass the swallowing logic */
+	ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_SWALLOW_EN,
+				   PLLSH_COEX_PLL_SWALLOW_EN_VAL1);
+	if (ret < 0)
+		goto out;
+
 	ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_N,
 				   wl18xx_clk_table[clk_freq].n);
 	if (ret < 0)
@@ -745,6 +774,30 @@ static int wl18xx_set_clk(struct wl1271 *wl)
 					   PLLSH_WCS_PLL_SWALLOW_EN_VAL2);
 	}
 
+	/* choose WCS PLL */
+	ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_SEL,
+				   PLLSH_WL_PLL_SEL_WCS_PLL);
+	if (ret < 0)
+		goto out;
+
+	/* enable both PLLs */
+	ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_EN, PLLSH_WL_PLL_EN_VAL1);
+	if (ret < 0)
+		goto out;
+
+	udelay(1000);
+
+	/* disable coex PLL */
+	ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_EN, PLLSH_WL_PLL_EN_VAL2);
+	if (ret < 0)
+		goto out;
+
+	/* reset the swallowing logic */
+	ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_SWALLOW_EN,
+				   PLLSH_COEX_PLL_SWALLOW_EN_VAL2);
+	if (ret < 0)
+		goto out;
+
 out:
 	return ret;
 }

drivers/net/wireless/ti/wl18xx/reg.h

@@ -114,6 +114,11 @@
 #define PLATFORM_DETECTION		0xA0E3E0
 #define OCS_EN				0xA02080
 #define PRIMARY_CLK_DETECT		0xA020A6
+#define PLLSH_COEX_PLL_N		0xA02384
+#define PLLSH_COEX_PLL_M		0xA02382
+#define PLLSH_COEX_PLL_SWALLOW_EN	0xA0238E
+#define PLLSH_WL_PLL_SEL		0xA02398
+
 #define PLLSH_WCS_PLL_N			0xA02362
 #define PLLSH_WCS_PLL_M			0xA02360
 #define PLLSH_WCS_PLL_Q_FACTOR_CFG_1	0xA02364
@@ -128,9 +133,17 @@
 #define PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK	0xFFFF
 #define PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK	0x000F
 
+#define PLLSH_WL_PLL_EN_VAL1		0x7
+#define PLLSH_WL_PLL_EN_VAL2		0x2
+#define PLLSH_COEX_PLL_SWALLOW_EN_VAL1	0x2
+#define PLLSH_COEX_PLL_SWALLOW_EN_VAL2	0x11
+
 #define PLLSH_WCS_PLL_SWALLOW_EN_VAL1	0x1
 #define PLLSH_WCS_PLL_SWALLOW_EN_VAL2	0x12
 
+#define PLLSH_WL_PLL_SEL_WCS_PLL	0x0
+#define PLLSH_WL_PLL_SEL_COEX_PLL	0x1
+
 #define WL18XX_REG_FUSE_DATA_1_3	0xA0260C
 #define WL18XX_PG_VER_MASK		0x70
 #define WL18XX_PG_VER_OFFSET		4