- 05 Apr, 2023 17 commits
-
-
Aleksander Jan Bajkowski authored
The removed function declaration is a leftover of the old gphy firmware loader, that has been removed in d5103604. Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Nathan Chancellor authored
When building with clang's integrated assembler, it points out that the CONFIG_CPU_HAS_DIEI versions of local_irq_enable and local_irq_disable have a named parameter that is not used in the body of the macro and it thinks that $8 is a positional parameter, rather than a register: arch/mips/include/asm/asmmacro.h:48:2: warning: macro defined with named parameters which are not used in macro body, possible positional parameter found in body which will have no effect .macro local_irq_enable reg=$8 ^ The comment above the function that performs this check in LLVM notes that the warning may trigger in this case, even though it is not problematic. It is easy enough to clean this up by just omitting the named parameter for this version of the macro, as it is entirely unused. Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1415 Link: https://github.com/llvm/llvm-project/commit/81c944cadb7f9e55b3517b7423a820e2577b9279Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
Thomas Bogendoerfer authored
After ide.h is gone, there are no users of local_cache_flush_page() left. Signed-off-by: -
Thomas Bogendoerfer authored
There are only three drivers left using ide.h, which are all m68k only. Signed-off-by: -
Thomas Bogendoerfer authored
The *cache_page_indexed flush functions are no (longer) used. Signed-off-by: -
Jiaxun Yang authored
Enable extra CPUs that may be supported by virt board, including R4x00 (R4000 in QEMU), Cavium Octeon (Octeon68XX in QEMU), loongson2e, loongson2f. Signed-off-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by:
-
Jiaxun Yang authored
Aligned with QEMU MIPS virt board. Signed-off-by:
-
Jiaxun Yang authored
QEMU can't emulate CVMSEG on generic platform for now. Just disable it by default. Signed-off-by:
-
Jiaxun Yang authored
ARCH_HAS_PHYS_TO_DMA and GPIOLIB are all platform level features they shouldn't be selected with CPU. Signed-off-by:
-
Jiaxun Yang authored
Arch cflags should be independent to Platform. Signed-off-by:
-
Jiaxun Yang authored
Don't include cvmseg states into thread_status when CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE is not defined or 0. Fix compile for kernel without this feature. Signed-off-by:
-
Jiaxun Yang authored
Currently c-octeon relies on octeon's own smp function to flush I-Cache. However this function is not available on generic platform. Just use smp_call_function_many on generic platform. Signed-off-by:
-
Jiaxun Yang authored
cpu_has_octeon_cache was tied to 0 for generic cpu-features, whith this generic kernel built for octeon CPU won't boot. Just enable this flag by cpu_type. It won't hurt orther platforms because compiler will eliminate the code path on other processors. Signed-off-by:
-
Jiaxun Yang authored
Octeon has a different cache interface with traditional R4K one, just opt-out this flag for octeon to avoid run R4K cache initialization code accidentally. Also remove ISA level assumption for 4k cache. Signed-off-by:
-
Jiaxun Yang authored
Prevent reading unsupported config register during probing process. Signed-off-by:
-
Jiaxun Yang authored
We don't know how to do coherence setup on ISA before MIPS Release 1. As CPS support only servers simulation purpose on those cores, and simulators are always coherent, just disable initialization code and provide user a warning in case coherence is not setup properly. Signed-off-by:
-
Jiaxun Yang authored
bcache is not tied to CPU's cache interface. Just move those declaration to cache.c so it can be avaialble to CPU with all cache types. Signed-off-by:
-
- 27 Mar, 2023 1 commit
-
-
Thomas Bogendoerfer authored
Commit ed6a0b6e ("MIPS: octeon: Use of_address_to_resource()") lost a cast, which causes a compile error. Fixes: ed6a0b6e ("MIPS: octeon: Use of_address_to_resource()") Signed-off-by:
-
- 24 Mar, 2023 5 commits
-
-
Jiaxun Yang authored
As nowadays DMA coherence is managed per device, it is possible to have a system that is defaulted to coherent dma but still have noncoherent device that needs to use those flush functions. Just install them unconditionally. Signed-off-by:
-
Jiaxun Yang authored
As now we are telling the necessity of post DMA flush per CPU type, there is no need to select ARCH_HAS_SYNC_DMA_FOR_CPU on per platform bias, just select it unconditionally and we can sort it at runtime. Signed-off-by:
-
Jiaxun Yang authored
arch_setup_dma_ops on MIPS sets coherency information in struct device. It's essential for per-device coherency to work. Select it for all non-coherent platforms. Signed-off-by:
-
Rob Herring authored
Replace of_get_address() and of_translate_address() calls with single call to of_address_to_resource(). Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by:
-
Lukas Bulwahn authored
Commit 1b00767f ("MIPS: Remove PMC MSP71xx platform") removes all uses of the config IRQ_MSP_CIC and IRQ_MSP_SLP. Remove these two obsolete configs IRQ_MSP_CIC and IRQ_MSP_SLP. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
- 17 Mar, 2023 5 commits
-
-
Lukas Bulwahn authored
Commit 85b9686d ("MIPS: ath79: drop platform device registration code") removes all files arch/mips/ath79/dev-*.[ch], adjusts the Makefile, but misses to adjust the Kconfig file. Hence, since then, the configs ATH79_DEV_* are really dead. Commit 3a77e0d7 ("MIPS: ath79: drop machfiles") already removes all configs that select ATH79_DEV_* config. So at that point, they was not a way to enable them with a kernel build configuration. Remove these obsolete ATH79_DEV_* configs. Signed-off-by:
-
Thomas Bogendoerfer authored
SIBYTE_BCM1125H is identical to SIBYTE_SB1250, so remove one of them. Signed-off-by: -
Thomas Bogendoerfer authored
Looks like these boards were nether in active use, so let's remove them. Signed-off-by: -
Thomas Bogendoerfer authored
SIBYTE_BCM1x55 is not selected anywhere, so let's get rid of it. Signed-off-by: -
Thomas Bogendoerfer authored
With the direct use of memblock interface board_mem_region is no longer needed. Signed-off-by:
-
- 14 Mar, 2023 12 commits
-
-
Rob Herring authored
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by:
-
Sergio Paracuellos authored
MT7620 SoCs have their own 'ralink_soc_info' structure with some information about the soc itself. In order to be able to retrieve this information from driver code and avoid architecture dependencies for retrieving these details introduce this 'soc_device'. Set 'data' pointer points to the struct 'ralink_soc_info' to be able to export also current soc information using this mechanism. We need to select 'SOC_BUS' in Kconfig configuration for these SoCs. Signed-off-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by:
-
Sergio Paracuellos authored
Move the SoC register value queries and tests to specific functions, to remove repetition of logic. No functional changes intended Signed-off-by:
-
Sergio Paracuellos authored
So that MT7620_SYSC_BASE can be used later in multiple functions without needing to repeat this __iomem declaration each time Signed-off-by:
-
Sergio Paracuellos authored
RT288X SoCs have their own 'ralink_soc_info' structure with some information about the soc itself. In order to be able to retrieve this information from driver code and avoid architecture dependencies for retrieving these details introduce this 'soc_device'. Set 'data' pointer points to the struct 'ralink_soc_info' to be able to export also current soc information using this mechanism. We need to select 'SOC_BUS' in Kconfig configuration for these SoCs. Signed-off-by:
-
Sergio Paracuellos authored
Move the SoC register value queries and tests to specific functions, to remove repetition of logic. No functional changes intended Signed-off-by:
-
Sergio Paracuellos authored
So that RT2880_SYSC_BASE can be used later in multiple functions without needing to repeat this __iomem declaration each time Signed-off-by:
-
Sergio Paracuellos authored
RT3883 SoC have its own 'ralink_soc_info' structure with some information about the soc itself. In order to be able to retrieve this information from driver code and avoid architecture dependencies for retrieving these details introduce this 'soc_device'. Set 'data' pointer points to the struct 'ralink_soc_info' to be able to export also current soc information using this mechanism. We need to select 'SOC_BUS' in Kconfig configuration for these SoCs. Signed-off-by:
-
Sergio Paracuellos authored
Move the SoC register value queries and tests to specific functions, to remove repetition of logic. No functional changes intended Signed-off-by:
-
Sergio Paracuellos authored
So that RT3883_SYSC_BASE can be used later in multiple functions without needing to repeat this __iomem declaration each time Signed-off-by:
-
Sergio Paracuellos authored
RT305x SoCs have their own 'ralink_soc_info' structure with some information about the soc itself. In order to be able to retrieve this information from driver code and avoid architecture dependencies for retrieving these details introduce this 'soc_device'. Set 'data' pointer points to the struct 'ralink_soc_info' to be able to export also current soc information using this mechanism. We need to select 'SOC_BUS' in Kconfig configuration for these SoCs. Signed-off-by:
-
Sergio Paracuellos authored
Move the SoC register value queries and tests to specific functions, to remove repetition of logic. No functional changes intended Signed-off-by:
-
