Pull pin control fixes from Linus Walleij:
 "Sorry to bomb in fixes this late. Maybe I can comfort you by saying it
  is only driver fixes, and mostly IRQ handling which is something GPIO
  and pin control drivers never get right. You think it works and then
  it doesn't.

  Summary:

   - Fix IRQ setup in the MCP23s08.

   - Fix pin setup on pins > 31 in the Ocelot driver.

   - Fix IRQs in the Mediatek driver"

* tag 'pinctrl-v5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: mediatek: Update cur_mask in mask/mask ops
  pinctrl: mediatek: Ignore interrupts that are wake only during resume
  pinctrl: ocelot: fix pinmuxing for pins after 31
  pinctrl: ocelot: fix gpio direction for pins after 31
  pinctrl: mcp23s08: Fix add_data and irqchip_add_nested call order

Pull clk fixes from Stephen Boyd:
 "A handful of clk driver fixes and one core framework fix

   - Do a DT/firmware lookup in clk_core_get() even when the DT index is
     a nonsensical value

   - Fix some clk data typos in the Amlogic DT headers/code

   - Avoid returning junk in the TI clk driver when an invalid clk is
     looked for

   - Fix dividers for the emac clks on Stratix10 SoCs

   - Fix default HDA rates on Tegra210 to correct distorted audio"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: socfpga: stratix10: fix divider entry for the emac clocks
  clk: Do a DT parent lookup even when index < 0
  clk: tegra210: Fix default rates for HDA clocks
  clk: ti: clkctrl: Fix returning uninitialized data
  clk: meson: meson8b: fix a typo in the VPU parent names array variable
  clk: meson: fix MPLL 50M binding id typo

Merge tag 'for-5.2/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix incorrect uses of kstrndup and DM logging macros in DM's early
   init code.

 - Fix DM log-writes target's handling of super block sectors so updates
   are made in order through use of completion.

 - Fix DM core's argument splitting code to avoid undefined behaviour
   reported as a side-effect of UBSAN analysis on ppc64le.

 - Fix DM verity target to limit the amount of error messages that can
   result from a corrupt block being found.

* tag 'for-5.2/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm verity: use message limit for data block corruption message
  dm table: don't copy from a NULL pointer in realloc_argv()
  dm log writes: make sure super sector log updates are written in order
  dm init: remove trailing newline from calls to DMERR() and DMINFO()
  dm init: fix incorrect uses of kstrndup()

Pull pidfd fixes from Christian Brauner:
 "Userspace tools and libraries such as strace or glibc need a cheap and
  reliable way to tell whether CLONE_PIDFD is supported. The easiest way
  is to pass an invalid fd value in the return argument, perform the
  syscall and verify the value in the return argument has been changed
  to a valid fd.

  However, if CLONE_PIDFD is specified we currently check if pidfd == 0
  and return EINVAL if not.

  The check for pidfd == 0 was originally added to enable us to abuse
  the return argument for passing additional flags along with
  CLONE_PIDFD in the future.

  However, extending legacy clone this way would be a terrible idea and
  with clone3 on the horizon and the ability to reuse CLONE_DETACHED
  with CLONE_PIDFD there's no real need for this clutch. So remove the
  pidfd == 0 check and help userspace out.

  Also, accordig to Al, anon_inode_getfd() should only be used past the
  point of no failure and ksys_close() should not be used at all since
  it is far too easy to get wrong. Al's motto being "basically, once
  it's in descriptor table, it's out of your control". So Al's patch
  switches back to what we already had in v1 of the original patchset
  and uses a anon_inode_getfile() + put_user() + fd_install() sequence
  in the success path and a fput() + put_unused_fd() in the failure
  path.

  The other two changes should be trivial"

* tag 'for-linus-20190627' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
  proc: remove useless d_is_dir() check
  copy_process(): don't use ksys_close() on cleanups
  samples: make pidfd-metadata fail gracefully on older kernels
  fork: don't check parent_tidptr with CLONE_PIDFD

Pull HID fixes from Jiri Kosina:

 - fix for one corner case in HID++ protocol with respect to handling
   very long reports, from Hans de Goede

 - power management fix in Intel-ISH driver, from Hyungwoo Yang

 - use-after-free fix in Intel-ISH driver, from Dan Carpenter

 - a couple of new device IDs/quirks from Kai-Heng Feng, Kyle Godbey and
   Oleksandr Natalenko

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: intel-ish-hid: fix wrong driver_data usage
  HID: multitouch: Add pointstick support for ALPS Touchpad
  HID: logitech-dj: Fix forwarding of very long HID++ reports
  HID: uclogic: Add support for Huion HS64 tablet
  HID: chicony: add another quirk for PixArt mouse
  HID: intel-ish-hid: Fix a use after free in load_fw_from_host()

Pull ARM SoC fixes from Olof Johansson:
 "A smaller batch of fixes, nothing that stands out as risky or scary.

  Mostly DTS tweaks for a few issues:

   - GPU fixlets for Meson

   - CPU idle fix for LS1028A

   - PWM interrupt fixes for i.MX6UL

  Also, enable a driver (FSL_EDMA) on arm64 defconfig, and a warning and
  two MAINTAINER tweaks"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: imx6ul: fix PWM[1-4] interrupts
  ARM: omap2: remove incorrect __init annotation
  ARM: dts: gemini Fix up DNS-313 compatible string
  ARM: dts: Blank D-Link DIR-685 console
  arm64: defconfig: Enable FSL_EDMA driver
  arm64: dts: ls1028a: Fix CPU idle fail.
  MAINTAINERS: BCM53573: Add internal Broadcom mailing list
  MAINTAINERS: BCM2835: Add internal Broadcom mailing list
  ARM: dts: meson8b: fix the operating voltage of the Mali GPU
  ARM: dts: meson8b: drop undocumented property from the Mali GPU node
  ARM: dts: meson8: fix GPU interrupts and drop an undocumented property

Pull AFS fixes from David Howells:
 "The in-kernel AFS client has been undergoing testing on opendev.org on
  one of their mirror machines. They are using AFS to hold data that is
  then served via apache, and Ian Wienand had reported seeing oopses,
  spontaneous machine reboots and updates to volumes going missing. This
  patch series appears to have fixed the problem, very probably due to
  patch (2), but it's not 100% certain.

  (1) Fix the printing of the "vnode modified" warning to exclude checks
      on files for which we don't have a callback promise from the
      server (and so don't expect the server to tell us when it
      changes).

      Without this, for every file or directory for which we still have
      an in-core inode that gets changed on the server, we may get a
      message logged when we next look at it. This can happen in bulk
      if, for instance, someone does "vos release" to update a R/O
      volume from a R/W volume and a whole set of files are all changed
      together.

      We only really want to log a message if the file changed and the
      server didn't tell us about it or we failed to track the state
      internally.

  (2) Fix accidental corruption of either afs_vlserver struct objects or
      the the following memory locations (which could hold anything).
      The issue is caused by a union that points to two different
      structs in struct afs_call (to save space in the struct). The call
      cleanup code assumes that it can simply call the cleanup for one
      of those structs if not NULL - when it might be actually pointing
      to the other struct.

      This means that every Volume Location RPC op is going to corrupt
      something.

  (3) Fix an uninitialised spinlock. This isn't too bad, it just causes
      a one-off warning if lockdep is enabled when "vos release" is
      called, but the spinlock still behaves correctly.

  (4) Fix the setting of i_block in the inode. This causes du, for
      example, to produce incorrect results, but otherwise should not be
      dangerous to the kernel"

* tag 'afs-fixes-20190620' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix setting of i_blocks
  afs: Fix uninitialised spinlock afs_volume::cb_break_lock
  afs: Fix vlserver record corruption
  afs: Fix over zealous "vnode modified" warnings

Pull arch/csky fixup from Guo Ren:
 "A fixup patch for rt_sigframe in signal.c"

* tag 'csky-for-linus-5.2-fixup-gcc-unwind' of git://github.com/c-sky/csky-linux:
  csky: Fixup libgcc unwind error

Pull networking fixes from David Miller:

 1) Fix ppp_mppe crypto soft dependencies, from Takashi Iawi.

 2) Fix TX completion to be finite, from Sergej Benilov.

 3) Use register_pernet_device to avoid a dst leak in tipc, from Xin
    Long.

 4) Double free of TX cleanup in Dirk van der Merwe.

 5) Memory leak in packet_set_ring(), from Eric Dumazet.

 6) Out of bounds read in qmi_wwan, from Bjørn Mork.

 7) Fix iif used in mcast/bcast looped back packets, from Stephen
    Suryaputra.

 8) Fix neighbour resolution on raw ipv6 sockets, from Nicolas Dichtel.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits)
  af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET
  sctp: change to hold sk after auth shkey is created successfully
  ipv6: fix neighbour resolution with raw socket
  ipv6: constify rt6_nexthop()
  net: dsa: microchip: Use gpiod_set_value_cansleep()
  net: aquantia: fix vlans not working over bridged network
  ipv4: reset rt_iif for recirculated mcast/bcast out pkts
  team: Always enable vlan tx offload
  net/smc: Fix error path in smc_init
  net/smc: hold conns_lock before calling smc_lgr_register_conn()
  bonding: Always enable vlan tx offload
  net/ipv6: Fix misuse of proc_dointvec "skip_notify_on_dev_down"
  ipv4: Use return value of inet_iif() for __raw_v4_lookup in the while loop
  qmi_wwan: Fix out-of-bounds read
  tipc: check msg->req data len in tipc_nl_compat_bearer_disable
  net: macb: do not copy the mac address if NULL
  net/packet: fix memory leak in packet_set_ring()
  net/tls: fix page double free on TX cleanup
  net/sched: cbs: Fix error path of cbs_module_init
  tipc: change to use register_pernet_device
  ...

During suspend/resume, mtk_eint_mask may be called while
wake_mask is active. For example, this happens if a wake-source
with an active interrupt handler wakes the system:
irq/pm.c:irq_pm_check_wakeup would disable the interrupt, so
that it can be handled later on in the resume flow.

However, this may happen before mtk_eint_do_resume is called:
in this case, wake_mask is loaded, and cur_mask is restored
from an older copy, re-enabling the interrupt, and causing
an interrupt storm (especially for level interrupts).

Step by step, for a line that has both wake and interrupt enabled:
 1. cur_mask[irq] = 1; wake_mask[irq] = 1; EINT_EN[irq] = 1 (interrupt
    enabled at hardware level)
 2. System suspends, resumes due to that line (at this stage EINT_EN
    == wake_mask)
 3. irq_pm_check_wakeup is called, and disables the interrupt =>
    EINT_EN[irq] = 0, but we still have cur_mask[irq] = 1
 4. mtk_eint_do_resume is called, and restores EINT_EN = cur_mask, so
    it reenables EINT_EN[irq] = 1 => interrupt storm as the driver
    is not yet ready to handle the interrupt.

This patch fixes the issue in step 3, by recording all mask/unmask
changes in cur_mask. This also avoids the need to read the current
mask in eint_do_suspend, and we can remove mtk_eint_chip_read_mask
function.

The interrupt will be re-enabled properly later on, sometimes after
mtk_eint_do_resume, when the driver is ready to handle it.

Fixes: 58a5e1b6 ("pinctrl: mediatek: Implement wake handler and suspend resume")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Remove the d_is_dir() check from tgid_pidfd_to_pid().

It is pointless since you should never get &proc_tgid_base_operations
for f_op on a non-directory.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <christian@brauner.io>

anon_inode_getfd() should be used *ONLY* in situations when we are
guaranteed to be past the last failure point (including copying the
descriptor number to userland, at that).  And ksys_close() should
not be used for cleanups at all.

anon_inode_getfile() is there for all nontrivial cases like that.
Just use that...

Fixes: b3e58382 ("clone: add CLONE_PIDFD")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Christian Brauner <christian@brauner.io>

When an application is run that:
a) Sets its scheduler to be SCHED_FIFO
and
b) Opens a memory mapped AF_PACKET socket, and sends frames with the
MSG_DONTWAIT flag cleared, its possible for the application to hang
forever in the kernel.  This occurs because when waiting, the code in
tpacket_snd calls schedule, which under normal circumstances allows
other tasks to run, including ksoftirqd, which in some cases is
responsible for freeing the transmitted skb (which in AF_PACKET calls a
destructor that flips the status bit of the transmitted frame back to
available, allowing the transmitting task to complete).

However, when the calling application is SCHED_FIFO, its priority is
such that the schedule call immediately places the task back on the cpu,
preventing ksoftirqd from freeing the skb, which in turn prevents the
transmitting task from detecting that the transmission is complete.

We can fix this by converting the schedule call to a completion
mechanism.  By using a completion queue, we force the calling task, when
it detects there are no more frames to send, to schedule itself off the
cpu until such time as the last transmitted skb is freed, allowing
forward progress to be made.

Tested by myself and the reporter, with good results

Change Notes:

V1->V2:
	Enhance the sleep logic to support being interruptible and
allowing for honoring to SK_SNDTIMEO (Willem de Bruijn)

V2->V3:
	Rearrage the point at which we wait for the completion queue, to
avoid needing to check for ph/skb being null at the end of the loop.
Also move the complete call to the skb destructor to avoid needing to
modify __packet_set_status.  Also gate calling complete on
packet_read_pending returning zero to avoid multiple calls to complete.
(Willem de Bruijn)

	Move timeo computation within loop, to re-fetch the socket
timeout since we also use the timeo variable to record the return code
from the wait_for_complete call (Neil Horman)

V3->V4:
	Willem has requested that the control flow be restored to the
previous state.  Doing so lets us eliminate the need for the
po->wait_on_complete flag variable, and lets us get rid of the
packet_next_frame function, but introduces another complexity.
Specifically, but using the packet pending count, we can, if an
applications calls sendmsg multiple times with MSG_DONTWAIT set, each
set of transmitted frames, when complete, will cause
tpacket_destruct_skb to issue a complete call, for which there will
never be a wait_on_completion call.  This imbalance will lead to any
future call to wait_for_completion here to return early, when the frames
they sent may not have completed.  To correct this, we need to re-init
the completion queue on every call to tpacket_snd before we enter the
loop so as to ensure we wait properly for the frames we send in this
iteration.

	Change the timeout and interrupted gotos to out_put rather than
out_status so that we don't try to free a non-existant skb
	Clean up some extra newlines (Willem de Bruijn)
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now in sctp_endpoint_init(), it holds the sk then creates auth
shkey. But when the creation fails, it doesn't release the sk,
which causes a sk defcnf leak,

Here to fix it by only holding the sk when auth shkey is created
successfully.

Fixes: a29a5bd4 ("[SCTP]: Implement SCTP-AUTH initializations.")
Reported-by: syzbot+afabda3890cc2f765041@syzkaller.appspotmail.com
Reported-by: syzbot+276ca1c77a19977c0130@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nicolas Dichtel says:

====================
ipv6: fix neighbour resolution with raw socket

The first patch prepares the fix, it constify rt6_nexthop().
The detail of the bug is explained in the second patch.

v1 -> v2:
 - fix compilation warnings
 - split the initial patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The scenario is the following: the user uses a raw socket to send an ipv6
packet, destinated to a not-connected network, and specify a connected nh.
Here is the corresponding python script to reproduce this scenario:

 import socket
 IPPROTO_RAW = 255
 send_s = socket.socket(socket.AF_INET6, socket.SOCK_RAW, IPPROTO_RAW)
 # scapy
 # p = IPv6(src='fd00:100::1', dst='fd00:200::fa')/ICMPv6EchoRequest()
 # str(p)
 req = b'`\x00\x00\x00\x00\x08:@\xfd\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\xfd\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xfa\x80\x00\x81\xc0\x00\x00\x00\x00'
 send_s.sendto(req, ('fd00:175::2', 0, 0, 0))

fd00:175::/64 is a connected route and fd00:200::fa is not a connected
host.

With this scenario, the kernel starts by sending a NS to resolve
fd00:175::2. When it receives the NA, it flushes its queue and try to send
the initial packet. But instead of sending it, it sends another NS to
resolve fd00:200::fa, which obvioulsy fails, thus the packet is dropped. If
the user sends again the packet, it now uses the right nh (fd00:175::2).

The problem is that ip6_dst_lookup_neigh() uses the rt6i_gateway, which is
:: because the associated route is a connected route, thus it uses the dst
addr of the packet. Let's use rt6_nexthop() to choose the right nh.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no functional change in this patch, it only prepares the next one.

rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const
variables.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace gpiod_set_value() with gpiod_set_value_cansleep(), as the switch
reset GPIO can be connected to e.g. I2C GPIO expander and it is perfectly
fine for the kernel to sleep for a bit in ksz_switch_register().
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <Woojung.Huh@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In configuration of vlan over bridge over aquantia device
it was found that vlan tagged traffic is dropped on chip.

The reason is that bridge device enables promisc mode,
but in atlantic chip vlan filters will still apply.
So we have to corellate promisc settings with vlan configuration.

The solution is to track in a separate state variable the
need of vlan forced promisc. And also consider generic
promisc configuration when doing vlan filter config.

Fixes: 7975d2af ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Multicast or broadcast egress packets have rt_iif set to the oif. These
packets might be recirculated back as input and lookup to the raw
sockets may fail because they are bound to the incoming interface
(skb_iif). If rt_iif is not zero, during the lookup, inet_iif() function
returns rt_iif instead of skb_iif. Hence, the lookup fails.

v2: Make it non vrf specific (David Ahern). Reword the changelog to
    reflect it.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should rather have vlan_tci filled all the way down
to the transmitting netdevice and let it do the hw/sw
vlan implementation.
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ursula Braun says:

====================
net/smc: fixes 2019-06-26

here are 2 small smc fixes for the net tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If register_pernet_subsys success in smc_init,
we should cleanup it in case any other error.

Fixes: 64e28b52 (net/smc: add pnet table namespace support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After smc_lgr_create(), the newly created link group is added
to smc_lgr_list, thus is accessible from other context.
Although link group creation is serialized by
smc_create_lgr_pending, the new link group may still be accessed
concurrently. For example, if ib_device is no longer active,
smc_ib_port_event_work() will call smc_port_terminate(), which
in turn will call __smc_lgr_terminate() on every link group of
this device. So conns_lock is required here.
Signed-off-by: Huaping Zhou <zhp@smail.nju.edu.cn>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We build vlan on top of bonding interface, which vlan offload
is off, bond mode is 802.3ad (LACP) and xmit_hash_policy is
BOND_XMIT_POLICY_ENCAP34.

Because vlan tx offload is off, vlan tci is cleared and skb push
the vlan header in validate_xmit_vlan() while sending from vlan
devices. Then in bond_xmit_hash, __skb_flow_dissect() fails to
get information from protocol headers encapsulated within vlan,
because 'nhoff' is points to IP header, so bond hashing is based
on layer 2 info, which fails to distribute packets across slaves.

This patch always enable bonding's vlan tx offload, pass the vlan
packets to the slave devices with vlan tci, let them to handle
vlan implementation.

Fixes: 278339a4 ("bonding: propogate vlan_features to bonding master")
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before suspending, mtk-eint would set the interrupt mask to the
one in wake_mask. However, some of these interrupts may not have a
corresponding interrupt handler, or the interrupt may be disabled.

On resume, the eint irq handler would trigger nevertheless,
and irq/pm.c:irq_pm_check_wakeup would be called, which would
try to call irq_disable. However, if the interrupt is not enabled
(irqd_irq_disabled(&desc->irq_data) is true), the call does nothing,
and the interrupt is left enabled in the eint driver.

Especially for level-sensitive interrupts, this will lead to an
interrupt storm on resume.

If we detect that an interrupt is only in wake_mask, but not in
cur_mask, we can just mask it out immediately (as mtk_eint_resume
would do anyway at a later stage in the resume sequence, when
restoring cur_mask).

Fixes: bf22ff45 ("genirq: Avoid unnecessary low level irq function calls")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Currently, in suspend() and resume(), ishtp client drivers are using
driver_data to get "struct ishtp_cl_device" object which is set by
bus driver. It's wrong since the driver_data should not be owned bus.
driver_data should be owned by the corresponding ishtp client driver.
Due to this, some ishtp client driver like cros_ec_ishtp which uses
its driver_data to transfer its data to its child doesn't work correctly.

So this patch removes setting driver_data in bus drier and instead of
using driver_data to get "struct ishtp_cl_device", since "struct device"
is embedded in "struct ishtp_cl_device", we introduce a helper function
that returns "struct ishtp_cl_device" from "struct device".
Signed-off-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

There's a new ALPS touchpad/pointstick combo device that requires
MT_CLS_WIN_8_DUAL to make its pointsitck work as a mouse.

The device can be found on HP ZBook 17 G5.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The HID++ spec also defines very long HID++ reports, with a reportid of
0x12. The MX5000 and MX5500 keyboards use 0x12 output reports for sending
messages to display on their buildin LCD.

Userspace (libmx5000) supports this, in order for this to work when talking
to the HID devices instantiated for the keyboard by hid-logitech-dj,
we need to properly forward these reports to the device.

This commit fixes logi_dj_ll_raw_request not forwarding these reports.

Fixes: f2113c30 ("HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add support for Huion HS64 drawing tablet to hid-uclogic
Signed-off-by: Kyle Godbey <me@kyle.ee>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

I've spotted another Chicony PixArt mouse in the wild, which requires
HID_QUIRK_ALWAYS_POLL quirk, otherwise it disconnects each minute.

USB ID of this device is 0x04f2:0x0939.

We've introduced quirks like this for other models before, so lets add
this mouse too.

Link: https://github.com/sriemer/fix-linux-mouse#usb-mouse-disconnectsreconnects-every-minute-on-linuxSigned-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Acked-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

We have to print the filename first before we can kfree it.

Fixes: 91b22810 ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The struct rt_sigframe is also defined in libgcc/config/csky/linux-unwind.h
of gcc. Although there is no use for the first three word space, we must
keep them the same with linux-unwind.h for member position.

The BUG is found in glibc test with the tst-cancel02.
The BUG is from commit:bf241682 of linux-5.2-rc1 merge window.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Mao Han <han_mao@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>

The fixed dividers for the emac clocks should be 2 not 4.

Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

/proc/sys/net/ipv6/route/skip_notify_on_dev_down assumes given value to be
0 or 1. Use proc_dointvec_minmax instead of proc_dointvec.

Fixes: 7c6bb7d2 ("net/ipv6: Add knob to skip DELROUTE message ondevice down")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 19e4e768 ("ipv4: Fix raw socket lookup for local
traffic"), the dif argument to __raw_v4_lookup() is coming from the
returned value of inet_iif() but the change was done only for the first
lookup. Subsequent lookups in the while loop still use skb->dev->ifIndex.

Fixes: 19e4e768 ("ipv4: Fix raw socket lookup for local traffic")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

DM verity should also use DMERR_LIMIT to limit repeat data block
corruption messages.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

For the first call to realloc_argv() in dm_split_args(), old_argv is
NULL and size is zero. Then memcpy is called, with the NULL old_argv
as the source argument and a zero size argument. AFAIK, this is
undefined behavior and generates the following warning when compiled
with UBSAN on ppc64le:

In file included from ./arch/powerpc/include/asm/paca.h:19,
                 from ./arch/powerpc/include/asm/current.h:16,
                 from ./include/linux/sched.h:12,
                 from ./include/linux/kthread.h:6,
                 from drivers/md/dm-core.h:12,
                 from drivers/md/dm-table.c:8:
In function 'memcpy',
    inlined from 'realloc_argv' at drivers/md/dm-table.c:565:3,
    inlined from 'dm_split_args' at drivers/md/dm-table.c:588:9:
./include/linux/string.h:345:9: error: argument 2 null where non-null expected [-Werror=nonnull]
  return __builtin_memcpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/dm-table.c: In function 'dm_split_args':
./include/linux/string.h:345:9: note: in a call to built-in function '__builtin_memcpy'
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Currently, although we submit super bios in order (and super.nr_entries
is incremented by each logged entry), submit_bio() is async so each
super sector may not be written to log device in order and then the
final nr_entries may be smaller than it should be.

This problem can be reproduced by the xfstests generic/455 with ext4:

  QA output created by 455
 -Silence is golden
 +mark 'end' does not exist

Fix this by serializing submission of super sectors to make sure each
is written to the log disk in order.

Fixes: 0e9cebe7 ("dm: add log writes target")
Cc: stable@vger.kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

These printing macros already add a trailing newline, so having another
one here just makes for blank lines when these prints are enabled.
Remove these needless newlines.

Fixes: 6bbc923d ("dm: add support to directly boot to a mapped device")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>