- 23 Aug, 2019 14 commits
-
-
Maxime Ripard authored
The Allwinner SoCs have an embedded GPADC that is doing thermal reading as well, supported in Linux, with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Jernej Skrabec authored
Tanix TX6 is an Allwinner H6 based TV box, which supports: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 4GiB DDR3 RAM (3GiB useable) - 100Mbps EMAC via AC200 EPHY - Cdtech 47822BS Wifi/BT - 2x USB 2.0 Host and 1x USB 3.0 Host - HDMI port - IR receiver - 64GiB eMMC - 5V/2A DC power supply Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Jernej Skrabec authored
Add new Oranth Tanix TX6 board compatible string to the bindings documentation. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Bhushan Shah authored
Add device-tree nodes for i2c0 to i2c2, and also add relevant pinctrl nodes. Suggested-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Bhushan Shah <bshah@kde.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Bhushan Shah authored
Allwinner H6 have a mv64xxx i2c interface available to be used. Signed-off-by: Bhushan Shah <bshah@kde.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Chen-Yu Tsai authored
The DWMAC binding never supported having the Ethernet PHY node as a direct child to the controller, nor did it support the "phy" property as a way to specify which Ethernet PHY to use. What seemed to work was simply the implementation ignoring the "phy" property and instead probing all addresses on the MDIO bus and using the first available one. The recent switch from "phy" to "phy-handle" breaks the assumptions of the implementation, and does not match what the binding requires. The binding requires that if an MDIO bus is described, it shall be a sub-node with the "snps,dwmac-mdio" compatible string. Add a device node for the MDIO bus, and move the Ethernet PHY node under it. Also fix up the #address-cells and #size-cells properties where needed. Fixes: de332de2 ("ARM: dts: sunxi: Switch from phy to phy-handle") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Clément Péron authored
Beelink GS1 has a DDC I2C bus voltage shifter. This is actually missing and video is limited to 1024x768 due to missing EDID information. Add the DDC regulator in the device-tree. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Clément Péron authored
Beelink GS1 board has a SPDIF out connector, so enable it in the device-tree and add a simple SPDIF soundcard. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Clément Péron authored
The Allwinner H6 has a SPDIF controller called OWA (One Wire Audio). Only one pinmuxing is available so set it as default. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Icenowy Zheng authored
Lichee zero plus is a core board made by Sipeed, which includes on-board TF slot or SMT SD NAND, and optional SPI NOR or eMMC, a UART debug header, a microUSB slot and a gold finger connector for expansion. It can use either Sochip S3 or Allwinner S3L SoC. Add the basic device tree for the core board, w/o optional onboard storage, and with S3 SoC. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Icenowy Zheng authored
The Allwinner S3/S3L/V3 SoCs all share the same die with the V3s SoC, but with more GPIO wired out of the package. Add a DTSI file for these SoCs. It just replaces some compatible strings of the V3s DTSI now. As these SoCs share the same feature set on Linux, we use the first known chip (V3) as the file's name. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Icenowy Zheng authored
The Lichee Zero Plus is a core board made by Sipeed, with a microUSB connector on it, TF slot or WSON8 SD chip, optional eMMC or SPI Flash. It has a gold finger connector for expansion, and UART is available from reserved pins w/ 2.54mm pitch. The board can use either SoChip S3 or Allwinner V3L SoCs. Add the device tree binding of the basic version of the core board -- w/o eMMC or SPI Flash, w/ TF slot or WSON8 SD, and use S3 SoC. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Ondrej Jirman authored
Orange Pi 3 has a DDC_CEC_EN signal connected to PH2, that enables the DDC I2C bus voltage shifter. Before EDID can be read, we need to pull PH2 high. This is realized by the ddc-en-gpios property. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Chen-Yu Tsai authored
The Cubietruck Plus has an HDMI connector tied to the HDMI output of the SoC. Enables display output via HDMI on the Cubietruck Plus. The connector device node is named "hdmi-connector" as there is also a display port connector, which is tied to the MIPI DSI output of the SoC through a MIPI-DSI-to-DP bridge. This part is not supported yet. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
- 24 Jul, 2019 6 commits
-
-
Clément Péron authored
Beelink GS1, OrangePi H6 boards and Pine H64 have an IR receiver. Enable it in their device-tree. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Clément Péron authored
Allwinner H6 IR is similar to A31 and can use same driver. Add support for it. Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Jernej Skrabec authored
OrangePi Win board contains IR receiver. Enable it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Igors Makejevs authored
IR peripheral is completely compatible with A31 one. Signed-off-by: Igors Makejevs <git_bb@bwzone.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Clément Péron authored
Since A31, memory mapping of the IR driver has changed. Prefer the A31 bindings instead of A13. Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Clément Péron authored
Since A31, memory mapping of the IR driver has changed. Prefer the A31 bindings instead of A13. Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
- 23 Jul, 2019 2 commits
-
-
Maxime Ripard authored
Even though the binding mentions that the PHY name must be "phy", it turns out that all our DTs had "hdmi-phy" instead. The code doesn't care about the phy-names property, so we can just change our DTs to match the binding, without any side effect. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Maxime Ripard authored
simple-panel based bindings need only the display compatible, and simple-panel isn't documented anywhere. Remove it. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
- 22 Jul, 2019 4 commits
-
-
Maxime Ripard authored
The SID node one the H6 doesn't have a standard node name. Switch to the one we use for the other SoCs. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Maxime Ripard authored
The DE2 bus takes two clocks, named bus and mod according to the binding. However, the order of these clocks change from one SoC to another. Even though it might not be an issue in most cases, having consistency will help if we ever need to have some code to deal with deprecated bindings, and in general it's just better. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Maxime Ripard authored
The phy device tree property has been deprecated in favor of phy-handle, let's replace it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Maxime Ripard authored
The DWMAC specific properties to manage the PHY have been superseeded by the generic PHY properties. Let's move to it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
- 21 Jul, 2019 14 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull Devicetree fixes from Rob Herring: "Fix several warnings/errors in validation of binding schemas" * tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples dt-bindings: iio: ad7124: Fix dtc warnings in example dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example dt-bindings: pinctrl: aspeed: Fix AST2500 example errors dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes dt-bindings: Ensure child nodes are of type 'object'
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs documentation typo fix from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: typo fix: it's d_make_root, not d_make_inode...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Two fixes for stable, one that had dependency on earlier patch in this merge window and can now go in, and a perf improvement in SMB3 open" * tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: flush before set-info if we have writeable handles smb3: optimize open to not send query file internal info cifs: copy_file_range needs to strip setuid bits and update timestamps CIFS: fix deadlock in cached root handling
-
Qian Cai authored
The commit b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method") incorrectly changed the checking from dma_ops_alloc_iova() in map_sg() causes a crash under memory pressure as dma_ops_alloc_iova() never return DMA_MAPPING_ERROR on failure but 0, so the error handling is all wrong. kernel BUG at drivers/iommu/iova.c:801! Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0 Call Trace: free_cpu_cached_iovas+0xbd/0x150 alloc_iova_fast+0x8c/0xba dma_ops_alloc_iova.isra.6+0x65/0xa0 map_sg+0x8c/0x2a0 scsi_dma_map+0xc6/0x160 pqi_aio_submit_io+0x1f6/0x440 [smartpqi] pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi] scsi_queue_rq+0x79c/0x1200 blk_mq_dispatch_rq_list+0x4dc/0xb70 blk_mq_sched_dispatch_requests+0x249/0x310 __blk_mq_run_hw_queue+0x128/0x200 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x522/0xa10 worker_thread+0x63/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x22/0x40 Fixes: b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Rapoport authored
The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(), pte_free_kernel() and pte_free() is identical to the generic except of lack of __GFP_ACCOUNT for the user PTEs allocation. Switch hexagon to use generic version of these functions. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Rob Herring authored
Now that examples are validated against the DT schema, an error with required 'clocks' property missing is exposed: Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@40020000: gpio@0: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@1000: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@2000: 'clocks' is a required property Add the missing 'clocks' properties to the examples to fix the errors. Fixes: 2c9239c1 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
With the conversion to DT schema, the examples are now compiled with dtc. The ad7124 binding example has the following warning: Documentation/devicetree/bindings/iio/adc/adi,ad7124.example.dts:19.11-21: \ Warning (reg_format): /example-0/adc@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) There's a default #size-cells and #address-cells values of 1 for examples. For examples needing different values such as this one on a SPI bus, they need to provide a SPI bus parent node. Fixes: 26ae15e6 ("Convert AD7124 bindings documentation to YAML format.") Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
Now that examples are validated against the DT schema, a typo in avia-hx711 example generates a warning: Documentation/devicetree/bindings/iio/adc/avia-hx711.example.dt.yaml: weight: 'avdd-supply' is a required property Fix the typo. Fixes: 5150ec3f ("avia-hx711.yaml: transform DT binding to YAML") Cc: Andreas Klinger <ak@it-klinger.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
The schema examples are now validated against the schema itself. The AST2500 pinctrl schema has a couple of errors: Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ example-0: $nodename:0: 'example-0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ pinctrl: aspeed,external-nodes: [[1, 2]] is too short Fixes: 0a617de1 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
The Aspeed pinctl schema have errors in the 'compatible' schema: Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2400-pinctrl', 'aspeed', 'g4-pinctrl'] has non-unique elements Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2500-pinctrl', 'aspeed', 'g5-pinctrl'] has non-unique elements Flow style sequences have to be quoted if the vales contain ','. Fix this by using the more common one line per entry formatting. Fixes: 0a617de1 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Fixes: 07457937 ("dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
Matching on the 'cpus' node was a bad choice because the schema is incorrectly applied to non-RiscV cpus nodes. As we now have a common cpus schema which checks the general structure, it is also redundant to do so in the Risc-V CPU schema. The downside is one could conceivably mix different architecture's cpu nodes or have typos in the compatible string. The latter problem pretty much exists for every schema. Acked-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Rob Herring <robh@kernel.org>
-