- 25 Nov, 2022 1 commit
-
-
Mark Brown authored
Linux 6.1-rc4 which should get my CI working on RPi3s again.
-
- 24 Nov, 2022 7 commits
-
-
Jean Delvare authored
Since commit 0166dc11 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. As a minor optimization, this also lets us drop several occurrences of of_match_ptr(), __maybe_unused and some ifdef guarding, as we now know what all of this will resolve to, we might as well save cpp some work. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Icenowy Zheng <icenowy@aosc.io> Link: https://lore.kernel.org/r/20221124144708.64371b98@endymion.delvareSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-for-MFD-by:
Lee Jones <lee@kernel.org> Acked-for-Backlight-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Mark Brown authored
Merge series from Abel Vesa <abel.vesa@linaro.org>: This patchset adds regulator support for the new Qualcomm PM8550 PMIC.
-
- 23 Nov, 2022 15 commits
-
-
Mark Brown authored
Merge series from Matti Vaittinen <mazziesaccount@gmail.com>: Minor (printing) improvements for ROHM regulator drivers. This series: - Drops an unnecessary info print from bd718x7. (Added a fixes tag for this but not really sure if worth adding to stable) - Convert the ROHM BDxxxxx PMIC regulator drivers to use dev_err_probe(). - Change the probe logic for bd718x7 to favor the more usual devm-style where errors are returned immediately.
-
Abel Vesa authored
Add the rpmh regulators found in PM8550 PMIC and its variants, along with their compatibles and configuration data. They also contain some FT-SMPS 525, so add their configuration as well. Signed-off-by:
Abel Vesa <abel.vesa@linaro.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20221123153638.721254-3-abel.vesa@linaro.orgSigned-off-by:
-
Abel Vesa authored
Add compatible string for PM8550 used in SM8550 boards. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Acked-for-MFD-by:
-
Wang ShaoBo authored
Use kfree_const() to free supply_name conditionally in create_regulator() as supply_name may be allocated from kmalloc() or directly from .rodata section. Fixes: 87fe29b6 ("regulator: push allocations in create_regulator() outside of lock") Signed-off-by:
Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lore.kernel.org/r/20221123034616.3609537-1-bobo.shaobowang@huawei.comSigned-off-by:
-
Matti Vaittinen authored
The dev_err_probe() has (at least) following benefits over dev_err() when printing an error print for a failed function call at a device driver probe: - Omit error level print if error is 'EPRBE_DEFER' - Standardized print format for returned error - return the error value allowing shortening calls like: if (ret) { dev_err(...); return ret; } to if (ret) return dev_err_probe(...); Convert the ROHM BD718x7 regulator driver to use the dev_err_probe() when returned error is not hard-coded constant. NOTE: This commit also changes the error handling path to return immediately from a spot where the error is spotted instead of using a single point of exit. Signed-off-by:Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/fee54c2d04bb41b51381e31523f9ed31575206d2.1669203610.git.mazziesaccount@gmail.comSigned-off-by:
-
Matti Vaittinen authored
The dev_err_probe() has (at least) following benefits over dev_err() when printing an error print for a failed function call at a device driver probe: - Omit error level print if error is 'EPRBE_DEFER' - Standardized print format for returned error - return the error value allowing shortening calls like: if (ret) { dev_err(...); return ret; } to if (ret) return dev_err_probe(...); Convert the ROHM BD71828, ROHM BD71815 and ROHM BD9576 regulator drivers to use the dev_err_probe() when returned error is not hard-coded constant. Signed-off-by: -
Matti Vaittinen authored
A device-tree node name was printed when bd718x7 driver's feedback-loop feature was developed. This print was accidentally left in driver. The info-level print just pollutes the log. Drop unnecessary pr_info() Fixes: d2ad9811 ("regulator: bd718x7: Support external connection to scale voltages") Signed-off-by:
-
Mark Brown authored
Merge branch 'i2c/client_device_id_helper-immutable' of https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into regulator-6.2 so we can apply I2C API fixups.
-
- 22 Nov, 2022 13 commits
-
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Peng Wu authored
The regulator_get() function never returns NULL. It returns error pointers. Fixes: 27b9ecc7 ("regulator: Add of_regulator_bulk_get_all") Signed-off-by:
Peng Wu <wupeng58@huawei.com> Link: https://lore.kernel.org/r/20221122082242.82937-1-wupeng58@huawei.comSigned-off-by:
-
Richard Fitzgerald authored
The Arizona and Madera codecs all have a datasheet name of "MICVDD" for the regulator output. But future codecs with a regulator that can be controlled by this driver have different naming convention for the output of the regulator. Move the setting of the supply name from arizona_micsupp_common_init() to arizona_micsupp_probe() and madera_micsupp_probe(). Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221109165331.29332-8-rf@opensource.cirrus.comSigned-off-by:
-
Richard Fitzgerald authored
When Madera support was added to this driver the code was left using ARIZONA_* defines. This wasn't causing any problem because those defines just happened to have the same value as the equivalent MADERA_* defines. But it is not ideal to assume this, and future devices that can share this driver do not have the same register map. Fix the code to refer to the register data in struct regulator_desc. Signed-off-by:
-
- 18 Nov, 2022 2 commits
-
-
Mark Brown authored
Merge series from Corentin Labbe <clabbe@baylibre.com>: This adds a new regulator_bulk_get_all() which grab all supplies properties in a DT node, for use in implementing generic handling for things like MDIO PHYs where the physical standardisation of the bus does not extend to power supplies.
-
Corentin Labbe authored
It work exactly like regulator_bulk_get() but instead of working on a provided list of names, it seek all consumers properties matching xxx-supply. Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Link: https://lore.kernel.org/r/20221115073603.3425396-2-clabbe@baylibre.comSigned-off-by:
-
- 16 Nov, 2022 2 commits
-
-
Matti Vaittinen authored
New initialization macro for linear ranges was added. Slightly simplify the test code by using this macro - and at the same time also verify the macro is working as intended. Use the newly added LINEAR_RANGE() initialization macro for linear range test. Signed-off-by:
-
Johan Hovold authored
Remove a line break and increase indentation of the continuation line to avoid having the 'regulator-allowed-modes' example be reproduced verbatim with four-spaces indentation (instead of a tab, which is still too little) in devicetree sources. Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221116102054.4673-2-johan+linaro@kernel.orgSigned-off-by:
-
