- 16 Jul, 2020 13 commits
-
-
Lyude Paul authored
While most of the functionality on Nvidia GPUs doesn't require using an explicit handle instead of the main VRAM handle + offset, there are a couple of places that do require explicit handles, such as CRC functionality. Since this means we're about to add another nouveau-chosen handle, let's just go ahead and move any hard-coded handles into a single header. This is just to keep things slightly organized, and to make it a little bit easier if we need to add more handles in the future. This patch should contain no functional changes. Changes since v3: * Correct SPDX license identifier (checkpatch) Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Ben Skeggs <bskeggs@redhat.com> Acked-by:
Dave Airlie <airlied@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-9-lyude@redhat.com
-
Lyude Paul authored
In order to make sure that we flush disable updates at the right time when disabling CRCs, we'll need to be able to look at the outp state to see if we're changing it at the same time that we're disabling CRCs. So, expose the struct in disp.h. Signed-off-by:
-
Lyude Paul authored
While we're not quite ready yet to add support for flexible wndw mappings, we are going to need to at least keep track of the static wndw mappings we're currently using in each head's atomic state. We'll likely use this in the future to implement real flexible window mapping, but the primary reason we'll need this is for CRC support. See: on nvidia hardware, each CRC entry in the CRC notifier dma context has a "tag". This tag corresponds to the nth update on a specific EVO/NvDisplay channel, which itself is referred to as the "controlling channel". For gf119+ this can be the core channel, ovly channel, or base channel. Since we don't expose CRC entry tags to userspace, we simply ignore this feature and always use the core channel as the controlling channel. Simple. Things get a little bit more complicated on gv100+ though. GV100+ only lets us set the controlling channel to a specific wndw channel, and that wndw must be owned by the head that we're grabbing CRCs when we enable CRC generation. Thus, we always need to make sure that each atomic head state has at least one wndw that is mapped to the head, which will be used as the controlling channel. Note that since we don't have flexible wndw mappings yet, we don't expect to run into any scenarios yet where we'd have a head with no mapped wndws. When we do add support for flexible wndw mappings however, we'll need to make sure that we handle reprogramming CRC capture if our controlling wndw is moved to another head (and potentially reject the new head state entirely if we can't find another available wndw to replace it). With that being said, nouveau currently tracks wndw visibility on heads. It does not keep track of the actual ownership mappings, which are (currently) statically programmed. To fix this, we introduce another bitmask into nv50_head_atom.wndw to keep track of ownership separately from visibility. We then introduce a nv50_head callback to handle populating the wndw ownership map, and call it during the atomic check phase when core->assign_windows is set to true. Signed-off-by:
-
Lyude Paul authored
While we expose the ability to turn off hardware dithering for nouveau, we actually make the mistake of turning it on anyway, due to dithering_depth containing a non-zero value if our dithering depth isn't also set to 6 bpc. So, fix it by never enabling dithering when it's disabled. Signed-off-by:
-
Lyude Paul authored
Currently, we modify the depth value stored in the atomic state when performing a commit in order to workaround the fact we haven't implemented support for depths higher then 10 yet. This isn't idempotent though, as it will happen every atomic commit where we modify the OR state even if the head's depth in the atomic state hasn't been modified. Normally this wouldn't matter, since we don't modify OR state outside of modesets, but since the CRC capture region is implemented as part of the OR state in hardware we'll want to make sure all commits modifying OR state are idempotent so as to avoid changing the depth unexpectedly. So, fix this by simply not writing the reduced depth value we come up with to the atomic state. Signed-off-by:
-
Lyude Paul authored
Add some kind of vblank workers. The interface is similar to regular delayed works, and is mostly based off kthread_work. It allows for scheduling delayed works that execute once a particular vblank sequence has passed. It also allows for accurate flushing of scheduled vblank works - in that flushing waits for both the vblank sequence and job execution to complete, or for the work to get cancelled - whichever comes first. Whatever hardware programming we do in the work must be fast (must at least complete during the vblank or scanout period, sometimes during the first few scanlines of the vblank). As such we use a high-priority per-CRTC thread to accomplish this. Changes since v7: * Stuff drm_vblank_internal.h and drm_vblank_work_internal.h contents into drm_internal.h * Get rid of unnecessary spinlock in drm_crtc_vblank_on() * Remove !vblank->worker check * Grab vbl_lock in drm_vblank_work_schedule() * Mention self-rearming work items in drm_vblank_work_schedule() kdocs * Return 1 from drm_vblank_work_schedule() if the work was scheduled successfully, 0 or error code otherwise * Use drm_dbg_core() instead of DRM_DEV_ERROR() in drm_vblank_work_schedule() * Remove vblank->worker checks in drm_vblank_destroy_worker() and drm_vblank_flush_worker() Changes since v6: * Get rid of ->pending and seqcounts, and implement flushing through simpler means - danvet * Get rid of work_lock, just use drm_device->event_lock * Move drm_vblank_work item cleanup into drm_crtc_vblank_off() so that we ensure that all vblank work has finished before disabling vblanks * Add checks into drm_crtc_vblank_reset() so we yell if it gets called while there's vblank workers active * Grab event_lock in both drm_crtc_vblank_on()/drm_crtc_vblank_off(), the main reason for this is so that other threads calling drm_vblank_work_schedule() are blocked from attempting to schedule while we're in the middle of enabling/disabling vblanks. * Move drm_handle_vblank_works() call below drm_handle_vblank_events() * Simplify drm_vblank_work_cancel_sync() * Fix drm_vblank_work_cancel_sync() documentation * Move wake_up_all() calls out of spinlock where we can. The only one I left was the call to wake_up_all() in drm_vblank_handle_works() as this seemed like it made more sense just living in that function (which is all technically under lock) * Move drm_vblank_work related functions into their own source files * Add drm_vblank_internal.h so we can export some functions we don't want drivers using, but that we do need to use in drm_vblank_work.c * Add a bunch of documentation Changes since v4: * Get rid of kthread interfaces we tried adding and move all of the locking into drm_vblank.c. For implementing drm_vblank_work_flush(), we now use a wait_queue and sequence counters in order to differentiate between multiple work item executions. * Get rid of drm_vblank_work_cancel() - this would have been pretty difficult to actually reimplement and it occurred to me that neither nouveau or i915 are even planning to use this function. Since there's also no async cancel function for most of the work interfaces in the kernel, it seems a bit unnecessary anyway. * Get rid of to_drm_vblank_work() since we now are also able to just pass the struct drm_vblank_work to work item callbacks anyway Changes since v3: * Use our own spinlocks, don't integrate so tightly with kthread_works Changes since v2: * Use kthread_workers instead of reinventing the wheel. Cc: Tejun Heo <tj@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Co-developed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Lyude Paul authored
This got me confused for a bit while looking over this code: I had been planning on adding some blocking function calls into this function, but seeing the irqsave/irqrestore variants of spin_(un)lock() didn't make it very clear whether or not that would actually be safe. So I went ahead and reviewed every single driver in the kernel that uses this function, and they all fall into three categories: * Driver probe code * ->atomic_disable() callbacks * Legacy modesetting callbacks All of these will be guaranteed to have IRQs enabled, which means it's perfectly safe to block here. Just to make things a little less confusing to others in the future, let's switch over to spin_lock_irq()/spin_unlock_irq() to make that fact a little more obvious. Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
-
Lyude Paul authored
Since we'll be allocating resources for kthread_create_worker() in the next commit (which could fail and require us to clean up the mess), let's simplify the cleanup process a bit by registering a drm_vblank_init_release() action for each drm_vblank_crtc so they're still cleaned up if we fail to initialize one of them. Changes since v3: * Use drmm_add_action_or_reset() - Daniel Vetter Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Reviewed-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200713123913.34205-1-grandmaster@al2klimov.de
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Sebastian Reichel authored
Convert panel-dsi-cm bindings to YAML and add missing properties while at it. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Paul Cercueil authored
By changing the pixel clock and the length of the back porch, it is possible to obtain a perfect 50 Hz refresh rate. v2: Rebase on drm-misc-next Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
-
Paul Cercueil authored
The FRD350H54004 panel was marked as having active-high VSYNC and HSYNC signals, which sorts-of worked, but resulted in the picture fading out under certain circumstances. Fix this issue by marking VSYNC and HSYNC signals active-low. v2: Rebase on drm-misc-next Fixes: 7b6bd843 ("drm/panel: simple: Add support for the Frida FRD350H54004 panel") Cc: stable@vger.kernel.org # v5.5 Signed-off-by:
-
- 15 Jul, 2020 7 commits
-
-
Randy Dunlap authored
Drop doubled word "the" in a comment. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "to" in comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled words "the" and "be" in comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "is" in several comments. Signed-off-by:
-
Randy Dunlap authored
Drop the doubled words "the" and "by" in comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "should" in a comment. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "than" in a comment. Signed-off-by:
-
- 14 Jul, 2020 9 commits
-
-
Daniel Vetter authored
Exactly matches the one in the helpers. This avoids me having to roll out dma-fence critical section annotations to this copy. Reviewed-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Link: https://patchwork.freedesktop.org/patch/msgid/20200709123339.547390-2-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Gives us proper nonblocking support for free, and a pile of other things. The tilcdc code is simply old enough that it was never converted over, but was stuck forever with the copypasta from when it was initially merged. The riskiest thing with this conversion is maybe that there's an issue with the vblank handling or vblank event handling, which will upset the modern commit support in atomic helpers. But from a cursory review drm_crtc_vblank_on/off is called in the right places, and the event handling also seems to exist (albeit with much hand-rolling and probably some races, could perhaps be converted over to drm_crtc_arm_vblank_event without any real loss). Motivated by me not having to hand-roll the dma-fence annotations for this. v2: Clear out crtc_state->event when we're handling the event, to avoid upsetting the helpers (reported by Jyri). v3: Also send out even whent the crtc is getting disabled. Tilcdc looks a bit like conversion to simple display helpers would work out really nice. Tested-by:
-
Thomas Zimmermann authored
There's only trivial code left in mga_crtc_{prepare,commit}(). Merge the functions into the simple pipe's enable function. Signed-off-by:Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Thomas Zimmermann authored
The prepare and commit helpers for G200WB devices control the BMC. Rename them accordingly. While at it, also change the passed value's type to struct mga_device and remove some type upcasting. Signed-off-by:
-
Thomas Zimmermann authored
Modifying the <syncrst> field in mgag200_{enable,disable}_display() makes the code more readable. Also clear the <asyncrst> field to enable the display. The other bits in SEQ0 are unused, so no functional changes are made. Signed-off-by: -
Thomas Zimmermann authored
Of the DPMS code, only ON and OFF states are used. Simplify mode setting by moving both into separate functions and removing the rest. The original code busy waited in the middle of updating the screen state in SEQ1. To simplify the procedure, the new code busy waits first and then updates SEQ1 in one chunk. The DPMS code also set the LUT before enabling the screen. The patch moves this code into the simple-display pipe's enable function. v2: * comment on SEQ1 updates in commit message Signed-off-by:
-
Thomas Zimmermann authored
The simple pipe's disable function disables the screen by calling mgag200_disable_screen(). The simple pipe's enable function enables the screen by calling mgag200_enable_display(). During modeset operations the screen is off and remains off. It's only enabled after the modeset has been completed. Therefore remove all code that sets or clears the <scroff> field while in modeset. The related code also modifies the <syncrst> field in SEQ0. For now, keep this code in place. Signed-off-by:
-
Thomas Zimmermann authored
Makes the code slightly more flexible. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
The prepare function write-protects several registers that it doesn't even touch. Removed the related code. The code for unprotecting registers also clears VINT interrupts. Both is now done once during initialization. Signed-off-by:
-
- 13 Jul, 2020 6 commits
-
-
Tom Rix authored
clang static analysis flags this error sil-sii8620.c:184:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return ret; ^~~~~~~~~~ sii8620_readb calls sii8620_read_buf. sii8620_read_buf can return without setting its output pararmeter 'ret'. So initialize ret. Fixes: ce6e153f ("drm/bridge: add Silicon Image SiI8620 driver") Signed-off-by:Tom Rix <trix@redhat.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Christian König authored
Now that TTM is fixed up we can finally stop that nonsense. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Madhav Chauhan <madhav.chauhan@amd.com> Link: https://patchwork.freedesktop.org/patch/375620
-
Christian König authored
Stop touching the backend private pointer alltogether and make sure we never put the same mem twice by. Signed-off-by:
-
Marek Szyprowski authored
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function returns the number of the created entries in the DMA address space. However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and dma_unmap_sg must be called with the original number of the entries passed to the dma_map_sg(). struct sg_table is a common structure used for describing a non-contiguous memory buffer, used commonly in the DRM and graphics subsystems. It consists of a scatterlist with memory pages and DMA addresses (sgl entry), as well as the number of scatterlist entries: CPU pages (orig_nents entry) and DMA mapped pages (nents entry). It turned out that it was a common mistake to misuse nents and orig_nents entries, calling DMA-mapping functions with a wrong number of entries or ignoring the number of mapped entries returned by the dma_map_sg() function. To avoid such issues, lets use a common dma-mapping wrappers operating directly on the struct sg_table objects and use scatterlist page iterators where possible. This, almost always, hides references to the nents and orig_nents entries, making the code robust, easier to follow and copy/paste safe. Signed-off-by:Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
-
Marek Szyprowski authored
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function returns the number of the created entries in the DMA address space. However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and dma_unmap_sg must be called with the original number of the entries passed to the dma_map_sg(). struct sg_table is a common structure used for describing a non-contiguous memory buffer, used commonly in the DRM and graphics subsystems. It consists of a scatterlist with memory pages and DMA addresses (sgl entry), as well as the number of scatterlist entries: CPU pages (orig_nents entry) and DMA mapped pages (nents entry). It turned out that it was a common mistake to misuse nents and orig_nents entries, calling DMA-mapping functions with a wrong number of entries or ignoring the number of mapped entries returned by the dma_map_sg() function. To avoid such issues, lets use a common dma-mapping wrappers operating directly on the struct sg_table objects and use scatterlist page iterators where possible. This, almost always, hides references to the nents and orig_nents entries, making the code robust, easier to follow and copy/paste safe. Signed-off-by: -
Andrey Lebedev authored
Some pp or gp jobs can be successfully repeated even after they time outs. Introduce lima module parameter to specify number of times a job can hang before being dropped. Signed-off-by:
Andrey Lebedev <andrey@lebedev.lt> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200619075900.3030696-1-andrey.lebedev@gmail.com
-
- 12 Jul, 2020 2 commits
-
-
Melissa Wen authored
This change expands the coverage for the IGT kms_cursor_crc test, where the size varies between 64 and 512 for a square cursor. With this, in addition to the cursor 64x64, this patch enables the test of cursors with sizes: 128x128, 256x256, and 512x512. Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Reviewed-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
The LG LB070WV8 panel incorrectly reports a 16 bits per component value, while the panel uses 8 bits per component. Fix it. Fixes: dd015002 ("drm/panel: simple: Add support for LG LB070WV8 800x480 7" panel") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
- 11 Jul, 2020 1 commit
-
-
Jitao Shi authored
Delay the backlight on to make sure the video stable. Signed-off-by:
Jitao Shi <jitao.shi@mediatek.com> Signed-off-by:
-
- 10 Jul, 2020 2 commits
-
-
Sam Ravnborg authored
Now that dt-extract-example gained support for using root nodes in examples, update the example for the simple-frambuffer binding to use it. This gives us a better example and kill a long standing warning: simple-framebuffer.example.dts:23.16-39.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node Note: To get the update dt-extract-example execute: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade v2: - fix spelling of framebuffer (Geert) - drop stdout-path (Rob) Signed-off-by:
-
Sam Ravnborg authored
This binding describes a panel with a secondary channel. v3: - Add reg property and unit-address to dsi nodes (Rob) v2: - add check for required properties if link2 is present (Rob) Signed-off-by:
-
