- 10 Nov, 2023 38 commits
-
-
Dave Marchevsky authored
Refcounted local kptrs are kptrs to user-defined types with a bpf_refcount field. Recent commits ([0], [1]) modified the lifetime of refcounted local kptrs such that the underlying memory is not reused until RCU grace period has elapsed. Separately, verification of bpf_refcount_acquire calls currently succeeds for MAYBE_NULL non-owning reference input, which is a problem as bpf_refcount_acquire_impl has no handling for this case. This patch takes advantage of aforementioned lifetime changes to tag bpf_refcount_acquire_impl kfunc KF_RCU, thereby preventing MAYBE_NULL input to the kfunc. The KF_RCU flag applies to all kfunc params; it's fine for it to apply to the void *meta__ign param as that's populated by the verifier and is tagged __ign regardless. [0]: commit 7e26cd12 ("bpf: Use bpf_mem_free_rcu when bpf_obj_dropping refcounted nodes") is the actual change to allocation behaivor [1]: commit 0816b8c6 ("bpf: Consider non-owning refs to refcounted nodes RCU protected") modified verifier understanding of refcounted local kptrs to match [0]'s changes Signed-off-by:
Dave Marchevsky <davemarchevsky@fb.com> Fixes: 7c50b1cb ("bpf: Add bpf_refcount_acquire kfunc") Link: https://lore.kernel.org/r/20231107085639.3016113-2-davemarchevsky@fb.comSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Shung-Hsi Yu authored
The addition of is_reg_const() in commit 171de12646d2 ("bpf: generalize is_branch_taken to handle all conditional jumps in one place") has made the register_is_const() redundant. Give the former has more feature, plus the fact the latter is only used in one place, replace register_is_const() with is_reg_const(), and remove the definition of register_is_const. This requires moving the definition of is_reg_const() further up. And since the comment of reg_const_value() reference is_reg_const(), move it up as well. Signed-off-by:Shung-Hsi Yu <shung-hsi.yu@suse.com> Acked-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231108140043.12282-1-shung-hsi.yu@suse.comSigned-off-by:
-
Andrii Nakryiko authored
Add ability to filter top B results, both in replay/verifier mode and comparison mode. Just adding `-n10` will emit only first 10 rows, or less, if there is not enough rows. This is not just a shortcut instead of passing veristat output through `head`, though. Filtering out all the other rows influences final table formatting, as table column widths are calculated based on actual emitted test. To demonstrate the difference, compare two "equivalent" forms below, one using head and another using -n argument. TOP N FEATURE ============= [vmuser@archvm bpf]$ sudo ./veristat -C ~/baseline-results-selftests.csv ~/sanity2-results-selftests.csv -e file,prog,insns,states -s '|insns_diff|' -n10 File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) ---------------------------------------- --------------------- --------- --------- ------------ ---------- ---------- ------------- test_seg6_loop.bpf.linked3.o __add_egr_x 12440 12360 -80 (-0.64%) 364 357 -7 (-1.92%) async_stack_depth.bpf.linked3.o async_call_root_check 145 145 +0 (+0.00%) 3 3 +0 (+0.00%) async_stack_depth.bpf.linked3.o pseudo_call_check 139 139 +0 (+0.00%) 3 3 +0 (+0.00%) atomic_bounds.bpf.linked3.o sub 7 7 +0 (+0.00%) 0 0 +0 (+0.00%) bench_local_storage_create.bpf.linked3.o kmalloc 5 5 +0 (+0.00%) 0 0 +0 (+0.00%) bench_local_storage_create.bpf.linked3.o sched_process_fork 22 22 +0 (+0.00%) 2 2 +0 (+0.00%) bench_local_storage_create.bpf.linked3.o socket_post_create 23 23 +0 (+0.00%) 2 2 +0 (+0.00%) bind4_prog.bpf.linked3.o bind_v4_prog 358 358 +0 (+0.00%) 33 33 +0 (+0.00%) bind6_prog.bpf.linked3.o bind_v6_prog 429 429 +0 (+0.00%) 37 37 +0 (+0.00%) bind_perm.bpf.linked3.o bind_v4_prog 15 15 +0 (+0.00%) 1 1 +0 (+0.00%) PIPING TO HEAD ============== [vmuser@archvm bpf]$ sudo ./veristat -C ~/baseline-results-selftests.csv ~/sanity2-results-selftests.csv -e file,prog,insns,states -s '|insns_diff|' | head -n12 File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) ----------------------------------------------------- ---------------------------------------------------- --------- --------- ------------ ---------- ---------- ------------- test_seg6_loop.bpf.linked3.o __add_egr_x 12440 12360 -80 (-0.64%) 364 357 -7 (-1.92%) async_stack_depth.bpf.linked3.o async_call_root_check 145 145 +0 (+0.00%) 3 3 +0 (+0.00%) async_stack_depth.bpf.linked3.o pseudo_call_check 139 139 +0 (+0.00%) 3 3 +0 (+0.00%) atomic_bounds.bpf.linked3.o sub 7 7 +0 (+0.00%) 0 0 +0 (+0.00%) bench_local_storage_create.bpf.linked3.o kmalloc 5 5 +0 (+0.00%) 0 0 +0 (+0.00%) bench_local_storage_create.bpf.linked3.o sched_process_fork 22 22 +0 (+0.00%) 2 2 +0 (+0.00%) bench_local_storage_create.bpf.linked3.o socket_post_create 23 23 +0 (+0.00%) 2 2 +0 (+0.00%) bind4_prog.bpf.linked3.o bind_v4_prog 358 358 +0 (+0.00%) 33 33 +0 (+0.00%) bind6_prog.bpf.linked3.o bind_v6_prog 429 429 +0 (+0.00%) 37 37 +0 (+0.00%) bind_perm.bpf.linked3.o bind_v4_prog 15 15 +0 (+0.00%) 1 1 +0 (+0.00%) Note all the wasted whitespace in the "PIPING TO HEAD" variant. Signed-off-by:
-
Andrii Nakryiko authored
Add ability to sort results by absolute values of specified stats. This is especially useful to find biggest deviations in comparison mode. When comparing verifier change effect against a large base of BPF object files, it's necessary to see big changes both in positive and negative directions, as both might be a signal for regressions or bugs. The syntax is natural, e.g., adding `-s '|insns_diff|'^` will instruct veristat to sort by absolute value of instructions difference in ascending order. Signed-off-by:
-
Yonghong Song authored
Martin reported that there is a libbpf complaining of non-zero-value tail padding with LIBBPF_OPTS_RESET macro if struct bpf_netkit_opts is modified to have a 4-byte tail padding. This only happens to clang compiler. The commend line is: ./test_progs -t tc_netkit_multi_links Martin and I did some investigation and found this indeed the case and the following are the investigation details. Clang: clang version 18.0.0 <I tried clang15/16/17 and they all have similar results> tools/lib/bpf/libbpf_common.h: #define LIBBPF_OPTS_RESET(NAME, ...) \ do { \ memset(&NAME, 0, sizeof(NAME)); \ NAME = (typeof(NAME)) { \ .sz = sizeof(NAME), \ __VA_ARGS__ \ }; \ } while (0) #endif tools/lib/bpf/libbpf.h: struct bpf_netkit_opts { /* size of this struct, for forward/backward compatibility */ size_t sz; __u32 flags; __u32 relative_fd; __u32 relative_id; __u64 expected_revision; size_t :0; }; #define bpf_netkit_opts__last_field expected_revision In the above struct bpf_netkit_opts, there is no tail padding. prog_tests/tc_netkit.c: static void serial_test_tc_netkit_multi_links_target(int mode, int target) { ... LIBBPF_OPTS(bpf_netkit_opts, optl); ... LIBBPF_OPTS_RESET(optl, .flags = BPF_F_BEFORE, .relative_fd = bpf_program__fd(skel->progs.tc1), ); ... } Let us make the following source change, note that we have a 4-byte tailing padding now. diff --git a/tools/lib/bpf/libbpf.h b/tools/lib/bpf/libbpf.h index 6cd9c501624f..0dd83910ae9a 100644 --- a/tools/lib/bpf/libbpf.h +++ b/tools/lib/bpf/libbpf.h @@ -803,13 +803,13 @@ bpf_program__attach_tcx(const struct bpf_program *prog, int ifindex, struct bpf_netkit_opts { /* size of this struct, for forward/backward compatibility */ size_t sz; - __u32 flags; __u32 relative_fd; __u32 relative_id; __u64 expected_revision; + __u32 flags; size_t :0; }; -#define bpf_netkit_opts__last_field expected_revision +#define bpf_netkit_opts__last_field flags The clang 18 generated asm code looks like below: ; LIBBPF_OPTS_RESET(optl, 55e3: 48 8d 7d 98 leaq -0x68(%rbp), %rdi 55e7: 31 f6 xorl %esi, %esi 55e9: ba 20 00 00 00 movl $0x20, %edx 55ee: e8 00 00 00 00 callq 0x55f3 <serial_test_tc_netkit_multi_links_target+0x18d3> 55f3: 48 c7 85 10 fd ff ff 20 00 00 00 movq $0x20, -0x2f0(%rbp) 55fe: 48 8b 85 68 ff ff ff movq -0x98(%rbp), %rax 5605: 48 8b 78 18 movq 0x18(%rax), %rdi 5609: e8 00 00 00 00 callq 0x560e <serial_test_tc_netkit_multi_links_target+0x18ee> 560e: 89 85 18 fd ff ff movl %eax, -0x2e8(%rbp) 5614: c7 85 1c fd ff ff 00 00 00 00 movl $0x0, -0x2e4(%rbp) 561e: 48 c7 85 20 fd ff ff 00 00 00 00 movq $0x0, -0x2e0(%rbp) 5629: c7 85 28 fd ff ff 08 00 00 00 movl $0x8, -0x2d8(%rbp) 5633: 48 8b 85 10 fd ff ff movq -0x2f0(%rbp), %rax 563a: 48 89 45 98 movq %rax, -0x68(%rbp) 563e: 48 8b 85 18 fd ff ff movq -0x2e8(%rbp), %rax 5645: 48 89 45 a0 movq %rax, -0x60(%rbp) 5649: 48 8b 85 20 fd ff ff movq -0x2e0(%rbp), %rax 5650: 48 89 45 a8 movq %rax, -0x58(%rbp) 5654: 48 8b 85 28 fd ff ff movq -0x2d8(%rbp), %rax 565b: 48 89 45 b0 movq %rax, -0x50(%rbp) ; link = bpf_program__attach_netkit(skel->progs.tc2, ifindex, &optl); At -O0 level, the clang compiler creates an intermediate copy. We have below to store 'flags' with 4-byte store and leave another 4 byte in the same 8-byte-aligned storage undefined, 5629: c7 85 28 fd ff ff 08 00 00 00 movl $0x8, -0x2d8(%rbp) and later we store 8-byte to the original zero'ed buffer 5654: 48 8b 85 28 fd ff ff movq -0x2d8(%rbp), %rax 565b: 48 89 45 b0 movq %rax, -0x50(%rbp) This caused a problem as the 4-byte value at [%rbp-0x2dc, %rbp-0x2e0) may be garbage. gcc (gcc 11.4) does not have this issue as it does zeroing struct first before doing assignments: ; LIBBPF_OPTS_RESET(optl, 50fd: 48 8d 85 40 fc ff ff leaq -0x3c0(%rbp), %rax 5104: ba 20 00 00 00 movl $0x20, %edx 5109: be 00 00 00 00 movl $0x0, %esi 510e: 48 89 c7 movq %rax, %rdi 5111: e8 00 00 00 00 callq 0x5116 <serial_test_tc_netkit_multi_links_target+0x1522> 5116: 48 8b 45 f0 movq -0x10(%rbp), %rax 511a: 48 8b 40 18 movq 0x18(%rax), %rax 511e: 48 89 c7 movq %rax, %rdi 5121: e8 00 00 00 00 callq 0x5126 <serial_test_tc_netkit_multi_links_target+0x1532> 5126: 48 c7 85 40 fc ff ff 00 00 00 00 movq $0x0, -0x3c0(%rbp) 5131: 48 c7 85 48 fc ff ff 00 00 00 00 movq $0x0, -0x3b8(%rbp) 513c: 48 c7 85 50 fc ff ff 00 00 00 00 movq $0x0, -0x3b0(%rbp) 5147: 48 c7 85 58 fc ff ff 00 00 00 00 movq $0x0, -0x3a8(%rbp) 5152: 48 c7 85 40 fc ff ff 20 00 00 00 movq $0x20, -0x3c0(%rbp) 515d: 89 85 48 fc ff ff movl %eax, -0x3b8(%rbp) 5163: c7 85 58 fc ff ff 08 00 00 00 movl $0x8, -0x3a8(%rbp) ; link = bpf_program__attach_netkit(skel->progs.tc2, ifindex, &optl); It is not clear how to resolve the compiler code generation as the compiler generates correct code w.r.t. how to handle unnamed padding in C standard. So this patch changed LIBBPF_OPTS_RESET macro to avoid uninitialized tail padding. We already knows LIBBPF_OPTS macro works on both gcc and clang, even with tail padding. So LIBBPF_OPTS_RESET is changed to be a LIBBPF_OPTS followed by a memcpy(), thus avoiding uninitialized tail padding. The below is asm code generated with this patch and with clang compiler: ; LIBBPF_OPTS_RESET(optl, 55e3: 48 8d bd 10 fd ff ff leaq -0x2f0(%rbp), %rdi 55ea: 31 f6 xorl %esi, %esi 55ec: ba 20 00 00 00 movl $0x20, %edx 55f1: e8 00 00 00 00 callq 0x55f6 <serial_test_tc_netkit_multi_links_target+0x18d6> 55f6: 48 c7 85 10 fd ff ff 20 00 00 00 movq $0x20, -0x2f0(%rbp) 5601: 48 8b 85 68 ff ff ff movq -0x98(%rbp), %rax 5608: 48 8b 78 18 movq 0x18(%rax), %rdi 560c: e8 00 00 00 00 callq 0x5611 <serial_test_tc_netkit_multi_links_target+0x18f1> 5611: 89 85 18 fd ff ff movl %eax, -0x2e8(%rbp) 5617: c7 85 1c fd ff ff 00 00 00 00 movl $0x0, -0x2e4(%rbp) 5621: 48 c7 85 20 fd ff ff 00 00 00 00 movq $0x0, -0x2e0(%rbp) 562c: c7 85 28 fd ff ff 08 00 00 00 movl $0x8, -0x2d8(%rbp) 5636: 48 8b 85 10 fd ff ff movq -0x2f0(%rbp), %rax 563d: 48 89 45 98 movq %rax, -0x68(%rbp) 5641: 48 8b 85 18 fd ff ff movq -0x2e8(%rbp), %rax 5648: 48 89 45 a0 movq %rax, -0x60(%rbp) 564c: 48 8b 85 20 fd ff ff movq -0x2e0(%rbp), %rax 5653: 48 89 45 a8 movq %rax, -0x58(%rbp) 5657: 48 8b 85 28 fd ff ff movq -0x2d8(%rbp), %rax 565e: 48 89 45 b0 movq %rax, -0x50(%rbp) ; link = bpf_program__attach_netkit(skel->progs.tc2, ifindex, &optl); In the above code, a temporary buffer is zeroed and then has proper value assigned. Finally, values in temporary buffer are copied to the original variable buffer, hence tail padding is guaranteed to be 0. Signed-off-by:Yonghong Song <yonghong.song@linux.dev> Signed-off-by:
Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/bpf/20231107201511.2548645-1-yonghong.song@linux.devSigned-off-by:
-
Andrii Nakryiko authored
Song Liu says: ==================== This set contains the first 3 patches of set [1]. Currently, [1] is waiting for [3] to be merged to bpf-next tree. So send these 3 patches first to unblock other works, such as [2]. This set is verified with new version of [1] in CI run [4]. Changes since v12 of [1]: 1. Reuse bpf_dynptr_slice() in __bpf_dynptr_data(). (Andrii) 2. Add Acked-by from Vadim Fedorenko. [1] https://lore.kernel.org/bpf/20231104001313.3538201-1-song@kernel.org/ [2] https://lore.kernel.org/bpf/20231031134900.1432945-1-vadfed@meta.com/ [3] https://lore.kernel.org/bpf/20231031215625.2343848-1-davemarchevsky@fb.com/ [4] https://github.com/kernel-patches/bpf/actions/runs/6779945063/job/18427926114 ==================== Signed-off-by:
-
Florian Lehner authored
When looking up an element in LPM trie, the condition 'matchlen == trie->max_prefixlen' will never return true, if key->prefixlen is larger than trie->max_prefixlen. Consequently all elements in the LPM trie will be visited and no element is returned in the end. To resolve this, check key->prefixlen first before walking the LPM trie. Fixes: b95a5c4d ("bpf: add a longest prefix match trie map implementation") Signed-off-by:
Florian Lehner <dev@der-flo.net> Signed-off-by:
-
Song Liu authored
Similar to ARG_PTR_TO_CONST_STR for BPF helpers, KF_ARG_PTR_TO_CONST_STR specifies kfunc args that point to const strings. Annotation "__str" is used to specify kfunc arg of type KF_ARG_PTR_TO_CONST_STR. Also, add documentation for the "__str" annotation. bpf_get_file_xattr() will be the first kfunc that uses this type. Signed-off-by:
Song Liu <song@kernel.org> Signed-off-by:
Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://lore.kernel.org/bpf/20231107045725.2278852-4-song@kernel.orgSigned-off-by:
-
Anders Roxell authored
Building an arm64 kernel and seftests/bpf with defconfig + selftests/bpf/config and selftests/bpf/config.aarch64 the fragment CONFIG_DEBUG_INFO_REDUCED is enabled in arm64's defconfig, it should be disabled in file sefltests/bpf/config.aarch64 since if its not disabled CONFIG_DEBUG_INFO_BTF wont be enabled. Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
-
Song Liu authored
ARG_PTR_TO_CONST_STR is used to specify constant string args for BPF helpers. The logic that verifies a reg is ARG_PTR_TO_CONST_STR is implemented in check_func_arg(). As we introduce kfuncs with constant string args, it is necessary to do the same check for kfuncs (in check_kfunc_args). Factor out the logic for ARG_PTR_TO_CONST_STR to a new check_reg_const_str() so that it can be reused. check_func_arg() ensures check_reg_const_str() is only called with reg of type PTR_TO_MAP_VALUE. Add a redundent type check in check_reg_const_str() to avoid misuse in the future. Other than this redundent check, there is no change in behavior. Signed-off-by:
-
Artem Savkov authored
bpftool's man page lists "program" as one of possible values for OBJECT, while in fact bpftool accepts "prog" instead. Reported-by:
Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by:
Artem Savkov <asavkov@redhat.com> Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20231103081126.170034-1-asavkov@redhat.comSigned-off-by:
-
Song Liu authored
Different types of bpf dynptr have different internal data storage. Specifically, SKB and XDP type of dynptr may have non-continuous data. Therefore, it is not always safe to directly access dynptr->data. Add __bpf_dynptr_data and __bpf_dynptr_data_rw to replace direct access to dynptr->data. Update bpf_verify_pkcs7_signature to use __bpf_dynptr_data instead of dynptr->data. Signed-off-by:
-
Manu Bretelle authored
Those configs are needed to be able to run VM somewhat consistently. For instance, ATM, s390x is missing the `CONFIG_VIRTIO_CONSOLE` which prevents s390x kernels built in CI to leverage qemu-guest-agent. By moving them to `config,vm`, we should have selftest kernels which are equal in term of VM functionalities when they include this file. The set of config unabled were picked using grep -h -E '(_9P|_VIRTIO)' config.x86_64 config | sort | uniq added to `config.vm` and then grep -vE '(_9P|_VIRTIO)' config.{x86_64,aarch64,s390x} as a side-effect, some config may have disappeared to the aarch64 and s390x kernels, but they should not be needed. CI will tell. Signed-off-by:Manu Bretelle <chantr4@gmail.com> Signed-off-by:
-
Andrii Nakryiko authored
Hou Tao says: ==================== From: Hou Tao <houtao1@huawei.com> Hi, BPF CI failed due to map_percpu_stats_percpu_hash from time to time [1]. It seems that the failure reason is per-cpu bpf memory allocator may not be able to allocate per-cpu pointer successfully and it can not refill free llist timely, and bpf_map_update_elem() will return -ENOMEM. Patch #1 fixes the size of value passed to per-cpu map update API. The problem was found when fixing the ENOMEM problem, so also post it in this patchset. Patch #2 & #3 mitigates the ENOMEM problem by retrying the update operation for non-preallocated per-cpu map. Please see individual patches for more details. And comments are always welcome. Regards, Tao [1]: https://github.com/kernel-patches/bpf/actions/runs/6713177520/job/18244865326?pr=5909 ==================== Signed-off-by:
-
Alexei Starovoitov authored
Andrii Nakryiko says: ==================== BPF register bounds logic and testing improvements This patch set adds a big set of manual and auto-generated test cases validating BPF verifier's register bounds tracking and deduction logic. See details in the last patch. We start with building a tester that validates existing <range> vs <scalar> verifier logic for range bounds. To make all this work, BPF verifier's logic needed a bunch of improvements to handle some cases that previously were not covered. This had no implications as to correctness of verifier logic, but it was incomplete enough to cause significant disagreements with alternative implementation of register bounds logic that tests in this patch set implement. So we need BPF verifier logic improvements to make all the tests pass. This is what we do in patches #3 through #9. The end goal of this work, though, is to extend BPF verifier range state tracking such as to allow to derive new range bounds when comparing non-const registers. There is some more investigative work required to investigate and fix existing potential issues with range tracking as part of ALU/ALU64 operations, so <range> x <range> part of v5 patch set ([0]) is dropped until these issues are sorted out. For now, we include preparatory refactorings and clean ups, that set up BPF verifier code base to extend the logic to <range> vs <range> logic in subsequent patch set. Patches #10-#16 perform preliminary refactorings without functionally changing anything. But they do clean up check_cond_jmp_op() logic and generalize a bunch of other pieces in is_branch_taken() logic. [0] https://patchwork.kernel.org/project/netdevbpf/list/?series=797178&state=* v5->v6: - dropped <range> vs <range> patches (original patches #18 through #23) to add more register range sanity checks and fix preexisting issues; - comments improvements, addressing other feedback on first 17 patches (Eduard, Alexei); v4->v5: - added entirety of verifier reg bounds tracking changes, now handling <range> vs <range> cases (Alexei); - added way more comments trying to explain why deductions added are correct, hopefully they are useful and clarify things a bit (Daniel, Shung-Hsi); - added two preliminary selftests fixes necessary for RELEASE=1 build to work again, it keeps breaking. v3->v4: - improvements to reg_bounds tester (progress report, split 32-bit and 64-bit ranges, fix various verbosity output issues, etc); v2->v3: - fix a subtle little-endianness assumption inside parge_reg_state() (CI); v1->v2: - fix compilation when building selftests with llvm-16 toolchain (CI). ==================== Link: https://lore.kernel.org/r/20231102033759.2541186-1-andrii@kernel.orgSigned-off-by:
-
Hou Tao authored
BPF CI failed due to map_percpu_stats_percpu_hash from time to time [1]. It seems that the failure reason is per-cpu bpf memory allocator may not be able to allocate per-cpu pointer successfully and it can not refill free llist timely, and bpf_map_update_elem() will return -ENOMEM. So mitigate the problem by retrying the update operation for non-preallocated per-cpu map. [1]: https://github.com/kernel-patches/bpf/actions/runs/6713177520/job/18244865326?pr=5909Signed-off-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
-
Andrii Nakryiko authored
Change reg_set_min_max() to take FALSE/TRUE sets of two registers each, instead of assuming that we are always comparing to a constant. For now we still assume that right-hand side registers are constants (and make sure that's the case by swapping src/dst regs, if necessary), but subsequent patches will remove this limitation. reg_set_min_max() is now called unconditionally for any register comparison, so that might include pointer vs pointer. This makes it consistent with is_branch_taken() generality. But we currently only support adjustments based on SCALAR vs SCALAR comparisons, so reg_set_min_max() has to guard itself againts pointers. Taking two by two registers allows to further unify and simplify check_cond_jmp_op() logic. We utilize fake register for BPF_K conditional jump case, just like with is_branch_taken() part. Acked-by:
Eduard Zingerman <eddyz87@gmail.com> Signed-off-by:
-
Hou Tao authored
Export map_update_retriable() to make it usable for other map_test cases. These cases may only need retry for specific errno, so add a new callback parameter to let map_update_retriable() decide whether or not the errno is retriable. Signed-off-by:
-
Andrii Nakryiko authored
Similarly to is_branch_taken()-related refactorings, start preparing reg_set_min_max() to handle more generic case of two non-const registers. Start with renaming arguments to accommodate later addition of second register as an input argument. Signed-off-by:
-
Hou Tao authored
When updating per-cpu map in map_percpu_stats test, patch_map_thread() only passes 4-bytes-sized value to bpf_map_update_elem(). The expected size of the value is 8 * num_possible_cpus(), so fix it by passing a value with enough-size for per-cpu map update. Signed-off-by:
-
Andrii Nakryiko authored
Combine 32-bit and 64-bit is_branch_taken logic for SCALAR_VALUE registers. It makes it easier to see parallels between two domains (32-bit and 64-bit), and makes subsequent refactoring more straightforward. No functional changes. Acked-by:
-
Andrii Nakryiko authored
Make is_branch_taken() a single entry point for branch pruning decision making, handling both pointer vs pointer, pointer vs scalar, and scalar vs scalar cases in one place. This also nicely cleans up check_cond_jmp_op(). Acked-by:
-
Andrii Nakryiko authored
Move is_branch_taken() slightly down. In subsequent patched we'll need both flip_opcode() and is_pkt_ptr_branch_taken() for is_branch_taken(), but instead of sprinkling forward declarations around, it makes more sense to move is_branch_taken() lower below is_pkt_ptr_branch_taken(), and also keep it closer to very tightly related reg_set_min_max(), as they are two critical parts of the same SCALAR range tracking logic. Signed-off-by:
-
Andrii Nakryiko authored
While still assuming that second register is a constant, generalize is_branch_taken-related code to accept two registers instead of register plus explicit constant value. This also, as a side effect, allows to simplify check_cond_jmp_op() by unifying BPF_K case with BPF_X case, for which we use a fake register to represent BPF_K's imm constant as a register. Acked-by:
-
Andrii Nakryiko authored
Just taking mundane refactoring bits out into a separate patch. No functional changes. Signed-off-by:
-
Andrii Nakryiko authored
When performing 32-bit conditional operation operating on lower 32 bits of a full 64-bit register, register full value isn't changed. We just potentially gain new knowledge about that register's lower 32 bits. Unfortunately, __reg_combine_{32,64}_into_{64,32} logic that reg_set_min_max() performs as a last step, can lose information in some cases due to __mark_reg64_unbounded() and __reg_assign_32_into_64(). That's bad and completely unnecessary. Especially __reg_assign_32_into_64() looks completely out of place here, because we are not performing zero-extending subregister assignment during conditional jump. So this patch replaced __reg_combine_* with just a normal reg_bounds_sync() which will do a proper job of deriving u64/s64 bounds from u32/s32, and vice versa (among all other combinations). __reg_combine_64_into_32() is also used in one more place, coerce_reg_to_size(), while handling 1- and 2-byte register loads. Looking into this, it seems like besides marking subregister as unbounded before performing reg_bounds_sync(), we were also performing deduction of smin32/smax32 and umin32/umax32 bounds from respective smin/smax and umin/umax bounds. It's now redundant as reg_bounds_sync() performs all the same logic more generically (e.g., without unnecessary assumption that upper 32 bits of full register should be zero). Long story short, we remove __reg_combine_64_into_32() completely, and coerce_reg_to_size() now only does resetting subreg to unbounded and then performing reg_bounds_sync() to recover as much information as possible from 64-bit umin/umax and smin/smax bounds, set explicitly in coerce_reg_to_size() earlier. Acked-by: -
Andrii Nakryiko authored
There are cases (caught by subsequent reg_bounds tests in selftests/bpf) where performing one round of __reg_deduce_bounds() doesn't propagate all the information from, say, s32 to u32 bounds and than from newly learned u32 bounds back to u64 and s64. So perform __reg_deduce_bounds() twice to make sure such derivations are propagated fully after reg_bounds_sync(). One such example is test `(s64)[0xffffffff00000001; 0] (u64)< 0xffffffff00000000` from selftest patch from this patch set. It demonstrates an intricate dance of u64 -> s64 -> u64 -> u32 bounds adjustments, which requires two rounds of __reg_deduce_bounds(). Here are corresponding refinement log from selftest, showing evolution of knowledge. REFINING (FALSE R1) (u64)SRC=[0xffffffff00000000; U64_MAX] (u64)DST_OLD=[0; U64_MAX] (u64)DST_NEW=[0xffffffff00000000; U64_MAX] REFINING (FALSE R1) (u64)SRC=[0xffffffff00000000; U64_MAX] (s64)DST_OLD=[0xffffffff00000001; 0] (s64)DST_NEW=[0xffffffff00000001; -1] REFINING (FALSE R1) (s64)SRC=[0xffffffff00000001; -1] (u64)DST_OLD=[0xffffffff00000000; U64_MAX] (u64)DST_NEW=[0xffffffff00000001; U64_MAX] REFINING (FALSE R1) (u64)SRC=[0xffffffff00000001; U64_MAX] (u32)DST_OLD=[0; U32_MAX] (u32)DST_NEW=[1; U32_MAX] R1 initially has smin/smax set to [0xffffffff00000001; -1], while umin/umax is unknown. After (u64)< comparison, in FALSE branch we gain knowledge that umin/umax is [0xffffffff00000000; U64_MAX]. That causes smin/smax to learn that zero can't happen and upper bound is -1. Then smin/smax is adjusted from umin/umax improving lower bound from 0xffffffff00000000 to 0xffffffff00000001. And then eventually umin32/umax32 bounds are drived from umin/umax and become [1; U32_MAX]. Selftest in the last patch is actually implementing a multi-round fixed-point convergence logic, but so far all the tests are handled by two rounds of reg_bounds_sync() on the verifier state, so we keep it simple for now. Signed-off-by:
-
Andrii Nakryiko authored
Add a few interesting cases in which we can tighten 64-bit bounds based on newly learnt information about 32-bit bounds. E.g., when full u64/s64 registers are used in BPF program, and then eventually compared as u32/s32. The latter comparison doesn't change the value of full register, but it does impose new restrictions on possible lower 32 bits of such full registers. And we can use that to derive additional full register bounds information. Acked-by:
-
Andrii Nakryiko authored
Add a special case where we can derive valid s32 bounds from umin/umax or smin/smax by stitching together negative s32 subrange and non-negative s32 subrange. That requires upper 32 bits to form a [N, N+1] range in u32 domain (taking into account wrap around, so 0xffffffff to 0x00000000 is a valid [N, N+1] range in this sense). See code comment for concrete examples. Eduard Zingerman also provided an alternative explanation ([0]) for more mathematically inclined readers: Suppose: . there are numbers a, b, c . 2**31 <= b < 2**32 . 0 <= c < 2**31 . umin = 2**32 * a + b . umax = 2**32 * (a + 1) + c The number of values in the range represented by [umin; umax] is: . N = umax - umin + 1 = 2**32 + c - b + 1 . min(N) = 2**32 + 0 - (2**32-1) + 1 = 2, with b = 2**32-1, c = 0 . max(N) = 2**32 + (2**31 - 1) - 2**31 + 1 = 2**32, with b = 2**31, c = 2**31-1 Hence [(s32)b; (s32)c] forms a valid range. [0] https://lore.kernel.org/bpf/d7af631802f0cfae20df77fe70068702d24bbd31.camel@gmail.com/Acked-by:
-
Andrii Nakryiko authored
Comments in code try to explain the idea behind why this is correct. Please check the code and comments. Acked-by:
-
Andrii Nakryiko authored
All the logic that applies to u64 vs s64, equally applies for u32 vs s32 relationships (just taken in a smaller 32-bit numeric space). So do the same deduction of smin32/smax32 from umin32/umax32, if we can. Acked-by:
-
Andrii Nakryiko authored
Add smin/smax derivation from appropriate umin/umax values. Previously the logic was surprisingly asymmetric, trying to derive umin/umax from smin/smax (if possible), but not trying to do the same in the other direction. A simple addition to __reg64_deduce_bounds() fixes this. Added also generic comment about u64/s64 ranges and their relationship. Hopefully that helps readers to understand all the bounds deductions a bit better. Acked-by:
-
Yuran Pereira authored
Since some malloc calls in bpf_iter may at times fail, this patch adds the appropriate fail checks, and ensures that any previously allocated resource is appropriately destroyed before returning the function. Signed-off-by:
Yuran Pereira <yuran.pereira@hotmail.com> Acked-by:
Kui-Feng Lee <thinker.li@gmail.com> Link: https://lore.kernel.org/r/DB3PR10MB6835F0ECA792265FA41FC39BE8A3A@DB3PR10MB6835.EURPRD10.PROD.OUTLOOK.COMSigned-off-by:
-
Andrii Nakryiko authored
Some compilers complain about get_pprint_mapv_size() not returning value in some code paths. Fix with explicit return. Signed-off-by:
-
Yuran Pereira authored
As it was pointed out by Yonghong Song [1], in the bpf selftests the use of the ASSERT_* series of macros is preferred over the CHECK macro. This patch replaces all CHECK calls in bpf_iter with the appropriate ASSERT_* macros. [1] https://lore.kernel.org/lkml/0a142924-633c-44e6-9a92-2dc019656bf2@linux.devSuggested-by:
-
Andrii Nakryiko authored
Compiler complains about malloc(). We also don't need to dynamically allocate anything, so make the life easier by using statically sized buffer. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter and bpf. Current release - regressions: - sched: fix SKB_NOT_DROPPED_YET splat under debug config Current release - new code bugs: - tcp: - fix usec timestamps with TCP fastopen - fix possible out-of-bounds reads in tcp_hash_fail() - fix SYN option room calculation for TCP-AO - tcp_sigpool: fix some off by one bugs - bpf: fix compilation error without CGROUPS - ptp: - ptp_read() should not release queue - fix tsevqs corruption Previous releases - regressions: - llc: verify mac len before reading mac header Previous releases - always broken: - bpf: - fix check_stack_write_fixed_off() to correctly spill imm - fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END - check map->usercnt after timer->timer is assigned - dsa: lan9303: consequently nested-lock physical MDIO - dccp/tcp: call security_inet_conn_request() after setting IP addr - tg3: fix the TX ring stall due to incorrect full ring handling - phylink: initialize carrier state at creation - ice: fix direction of VF rules in switchdev mode Misc: - fill in a bunch of missing MODULE_DESCRIPTION()s, more to come" * tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) net: ti: icss-iep: fix setting counter value ptp: fix corrupted list in ptp_open ptp: ptp_read should not release queue net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP net: kcm: fill in MODULE_DESCRIPTION() net/sched: act_ct: Always fill offloading tuple iifidx netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses netfilter: xt_recent: fix (increase) ipv6 literal buffer length ipvs: add missing module descriptions netfilter: nf_tables: remove catchall element in GC sync path netfilter: add missing module descriptions drivers/net/ppp: use standard array-copy-function net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt() r8169: respect userspace disabling IFF_MULTICAST selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg net: phylink: initialize carrier state at creation test/vsock: add dobule bind connect test test/vsock: refactor vsock_accept ... -
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes a regression in ahash and hides the Kconfig sub-options for the jitter RNG" * tag 'v6.7-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ahash - Set using_shash for cloned ahash wrapper over shash crypto: jitterentropy - Hide esoteric Kconfig options under FIPS and EXPERT
-
- 09 Nov, 2023 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: - a number of input drivers has been converted to use facilities provided by the device core to instantiate driver-specific attributes instead of using devm_device_add_group() and similar APIs - platform input devices have been converted to use remove() callback returning void - a fix for use-after-free when tearing down a Synaptics RMI device - a few flexible arrays in input structures have been annotated with __counted_by to help hardening efforts - handling of vddio supply in cyttsp5 driver - other miscellaneous fixups * tag 'input-for-v6.7-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits) Input: walkera0701 - use module_parport_driver macro to simplify the code Input: synaptics-rmi4 - fix use after free in rmi_unregister_function() dt-bindings: input: fsl,scu-key: Document wakeup-source Input: cyttsp5 - add handling for vddio regulator dt-bindings: input: cyttsp5: document vddio-supply Input: tegra-kbc - use device_get_match_data() Input: Annotate struct ff_device with __counted_by Input: axp20x-pek - avoid needless newline removal Input: mt - annotate struct input_mt with __counted_by Input: leds - annotate struct input_leds with __counted_by Input: evdev - annotate struct evdev_client with __counted_by Input: synaptics-rmi4 - replace deprecated strncpy Input: wm97xx-core - convert to platform remove callback returning void Input: wm831x-ts - convert to platform remove callback returning void Input: ti_am335x_tsc - convert to platform remove callback returning void Input: sun4i-ts - convert to platform remove callback returning void Input: stmpe-ts - convert to platform remove callback returning void Input: pcap_ts - convert to platform remove callback returning void Input: mc13783_ts - convert to platform remove callback returning void Input: mainstone-wm97xx - convert to platform remove callback returning void ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull more i2c updates from Wolfram Sang: "This contains one patch which slipped through the cracks (iproc), a core sanitizing improvement as the new memdup_array_user() helper went upstream (i2c-dev), and two driver bugfixes (designware, cp2615)" * tag 'for-6.7-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: cp2615: Fix 'assignment to __be16' warning i2c: dev: copy userspace array safely i2c: designware: Disable TX_EMPTY irq while waiting for block length byte i2c: iproc: handle invalid slave state
-
