- 20 May, 2013 18 commits
-
-
Daniel Borkmann authored
The next pointer within the inet6_dev structure seems not to be used anywhere. So just remove it. Tested with allmodconfig on x86_64. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
A cpu executing the network receive path sheds packets when its input queue grows to netdev_max_backlog. A single high rate flow (such as a spoofed source DoS) can exceed a single cpu processing rate and will degrade throughput of other flows hashed onto the same cpu. This patch adds a more fine grained hashtable. If the netdev backlog is above a threshold, IRQ cpus track the ratio of total traffic of each flow (using 4096 buckets, configurable). The ratio is measured by counting the number of packets per flow over the last 256 packets from the source cpu. Any flow that occupies a large fraction of this (set at 50%) will see packet drop while above the threshold. Tested: Setup is a muli-threaded UDP echo server with network rx IRQ on cpu0, kernel receive (RPS) on cpu0 and application threads on cpus 2--7 each handling 20k req/s. Throughput halves when hit with a 400 kpps antagonist storm. With this patch applied, antagonist overload is dropped and the server processes its complete load. The patch is effective when kernel receive processing is the bottleneck. The above RPS scenario is a extreme, but the same is reached with RFS and sufficient kernel processing (iptables, packet socket tap, ..). Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Fabio Estevam authored
Since commit ab78029e (drivers/pinctrl: grab default handles from device core) we can rely on device core for handling pinctrl, so remove devm_pinctrl_get_select_default() from the driver. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Wei Liu authored
We should correctly free related resources (grant ref, memory page, evtchn) when setup_netfront fails. Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Tony Prisk authored
Add support for the VIA Velocity network driver to be bound to a OF created platform device. Signed-off-by:
Tony Prisk <linux@prisktech.co.nz> Signed-off-by:
-
Tony Prisk authored
Remove the pci_* dma functions and replace with the more generic versions. In preparation of adding platform support, a new struct device *dev is added to struct velocity_info which can be used by both the pci and platform code. Signed-off-by:
-
Tony Prisk authored
Improve the clarity of the code in preparation for converting the dma functions to generic versions, which require a struct device *. This makes it possible to store a 'struct device *dev' in the velocity_info structure. Signed-off-by:
-
Sergei Shtylyov authored
It's suboptimal to invoke quite complex VORTEX_PCI() macro every time we want to get a 'struct pci_dev *' when we already have it in a variable... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Rolf Eike Beer authored
These 2 places are the only matches for is_eisa in the whole tree. Signed-off-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by:
-
Eric Dumazet authored
bnx2x_set_features() forces a driver reload if GRO setting is changed. A reload makes the ethernet port unresponsive for about 5 seconds. This is not needed in the common case LRO is enabled, as LRO (TPA_ENABLE_FLAG) has precedence over GRO (GRO_ENABLE_FLAG) Tested: Verified that "ethtool -K eth0 gro {on|off}" doesn't blackout the NIC anymore Google-Bug-Id: 8440442 Signed-off-by:Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
-
David S. Miller authored
Nithin Nayak Sujir says: ==================== This series adds support for modifying EEE settings via ethtool. Since this can impact Link Flap Avoidance, the driver pulls the current hardware settings if LFA is enabled. This is similar to how we do the link settings to avoid a flap. v2: Fixes pointed out by Ben Hutchings. - Use MDIO_AN_EEE_LPABLE to set the lp_advertised field. - Check that tx_lpi_timer is within valid range. ==================== Signed-off-by: -
Nithin Sujir authored
Reviewed-by:
Ben Li <benli@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by:
-
Nithin Sujir authored
eee_config_ok() was checking only for mismatch in advertised settings. This patch expands the scope of eee_config_ok() to check for mismatch in the other eee settings. On mismatch we will require a call to tg3_setup_eee() to push the configured settings to the hardware. Reviewed-by:
-
Nithin Sujir authored
Add tg3_eee_pull_config() to pull the settings from the hardware and populate the eee structure. If Link Flap Avoidance is enabled, we pull the eee settings from the hw so as not to cause a phy reset on eee config mismatch later. This requires moving down tg3_setup_eee() below the tg3_pull_config() to not trample existing settings. Reviewed-by:
-
Nithin Sujir authored
Add an eee structure and update it with eee settings. This will be used for set/get_eee operations. Add common function tg3_setup_eee() that will be used in the subsequent patches. Reviewed-by:
-
Eric Dumazet authored
Do not leak starting address of BPF JIT code for non root users, as it might help intruders to perform an attack. Signed-off-by:
-
Eric Dumazet authored
hpa bringed into my attention some security related issues with BPF JIT on x86. This patch makes sure the bpf generated code is marked read only, as other kernel text sections. It also splits the unused space (we vmalloc() and only use a fraction of the page) in two parts, so that the generated bpf code not starts at a known offset in the page, but a pseudo random one. Refs: http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.htmlReported-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Yuchung Cheng authored
tcp_timeout_skb() was intended to trigger fast recovery on timeout, unfortunately in reality it often causes spurious retransmission storms during fast recovery. The particular sign is a fast retransmit over the highest sacked sequence (SND.FACK). Currently the RTO timer re-arming (as in RFC6298) offers a nice cushion to avoid spurious timeout: when SND.UNA advances the sender re-arms RTO and extends the timeout by icsk_rto. The sender does not offset the time elapsed since the packet at SND.UNA was sent. But if the next (DUP)ACK arrives later than ~RTTVAR and triggers tcp_fastretrans_alert(), then tcp_timeout_skb() will mark any packet sent before the icsk_rto interval lost, including one that's above the highest sacked sequence. Most likely a large part of scorebard will be marked. If most packets are not lost then the subsequent DUPACKs with new SACK blocks will cause the sender to continue to retransmit packets beyond SND.FACK spuriously. Even if only one packet is lost the sender may falsely retransmit almost the entire window. The situation becomes common in the world of bufferbloat: the RTT continues to grow as the queue builds up but RTTVAR remains small and close to the minimum 200ms. If a data packet is lost and the DUPACK triggered by the next data packet is slightly delayed, then a spurious retransmission storm forms. As the original comment on tcp_timeout_skb() suggests: the usefulness of this feature is questionable. It also wastes cycles walking the sack scoreboard and is actually harmful because of false recovery. It's time to remove this. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Nandita Dukkipati <nanditad@google.com> Signed-off-by:
-
- 19 May, 2013 2 commits
-
-
Rami Rosen authored
This patch removes mentioning the sysfsf net_device weight attribute (class/net/<device>/weight) in Documentation/sysctl/net.txt, since the net sysfs weight attribute was removed by the following patch: [NET]: Make NAPI polling independent of struct net_device objects bea3348eSigned-off-by:
Rami Rosen <ramirose@gmail.com> Signed-off-by:
-
Nicolas Dichtel authored
This patch adds the support of peer address for IPv6. For example, it is possible to specify the remote end of a 6inY tunnel. This was already possible in IPv4: ip addr add ip1 peer ip2 dev dev1 The peer address is specified with IFA_ADDRESS and the local address with IFA_LOCAL (like explained in include/uapi/linux/if_addr.h). Note that the API is not changed, because before this patch, it was not possible to specify two different addresses in IFA_LOCAL and IFA_REMOTE. There is a small change for the dump: if the peer is different from ::, IFA_ADDRESS will contain the peer address instead of the local address. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
- 18 May, 2013 5 commits
-
-
Eric Dumazet authored
module_free()/vfree() takes care of details, we no longer need a wrapper and a work_struct. Signed-off-by:
-
Nicolas Dichtel authored
This was added by commit 59b9997b (Revert "net: maintain namespace isolation between vlan and real device"). In fact, before the initial commit - the one that is reverted -, this statement was not present. 'skb->dev = dev' is already done in eth_type_trans(), which is call just after. Spotted-by:
Alain Ritoux <alain.ritoux@6wind.com> Signed-off-by:
-
Wei Liu authored
This patch enables user to unload netback module, which is useful when user wants to upgrade to a newer netback module without rebooting the host. Netfront cannot handle netback removal event. As we cannot fix all possible frontends we add module get / put along with vif get / put to avoid mis-unloading of netback. To unload netback module, user needs to shutdown all VMs or migrate them to another host or unplug all vifs before hand. Signed-off-by:
-
Wei Liu authored
The array mmap_pages is never touched in the initialization function. This is remnant of mapping mechanism, which does not exist upstream. In current upstream code this array only tracks usage of pages inside netback. Those pages are allocated when contructing a SKB and passed directly to network subsystem. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
-
Eric Dumazet authored
It looks like we can call module_free()/vfree() from softirq context, so no longer need a wrapper and a work_struct. Signed-off-by:
-
- 17 May, 2013 8 commits
-
-
Sachin Kamat authored
module_usb_driver() eliminates boilerplate and simplifies the code. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Signed-off-by:
-
Sachin Kamat authored
version.h header inclusion is not necessary as detected by checkversion.pl. Signed-off-by:
-
stephen hemminger authored
The commit 823aa873 Author: stephen hemminger <stephen@networkplumber.org> Date: Sat Apr 27 11:31:57 2013 +0000 vxlan: allow choosing destination port per vxlan introduced per-vxlan UDP port configuration but only did half of the necessary work. It added per vxlan destination for sending, but overlooked the handling of multiple ports for incoming traffic. This patch changes the listening port management to handle multiple incoming UDP ports. The earlier per-namespace structure is now a hash list per namespace. It is also now possible to define the same virtual network id but with different UDP port values which can be useful for migration. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Emilio López authored
Clean up the code a bit to initialize the variables directly when defining them. Signed-off-by:
Emilio López <emilio@elopez.com.ar> Signed-off-by:
-
Emilio López authored
Clean up the code a bit to initialize the variables directly when defining them. Signed-off-by:
-
Emilio López authored
Clean up the code a bit to initialize the variables directly when defining them. Signed-off-by:
-
Emilio López authored
Clean up the code a bit to initialize the variables directly when defining them. Signed-off-by:
-
git://gitorious.org/linux-can/linux-can-nextDavid S. Miller authored
Marc Kleine-Budde says: ==================== this is a pull-request for net-next/master. It consists of 4 patches by Jingoo Han, which remove the unnecessary platform_set_drvdata() and a patch by Laurent Navet converting the grcan driver to use devm_ioremap_resource(). ==================== Signed-off-by:
-
- 16 May, 2013 7 commits
-
-
govindarajulu.v authored
This patch removes unnecessary #if 0 code from 3c509.c Signed-off-by:
govindarajulu.v <govindarajulu90@gmail.com> Signed-off-by:
-
Wolfram Sang authored
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Eric Dumazet authored
tcp_fixup_rcvbuf() contains a loop to estimate initial socket rcv space needed for a given mss. With large MTU (like 64K on lo), we can loop ~500 times and consume a lot of cpu cycles. perf top of 200 concurrent netperf -t TCP_CRR 5.62% netperf [kernel.kallsyms] [k] tcp_init_buffer_space 1.71% netperf [kernel.kallsyms] [k] _raw_spin_lock 1.55% netperf [kernel.kallsyms] [k] kmem_cache_free 1.51% netperf [kernel.kallsyms] [k] tcp_transmit_skb 1.50% netperf [kernel.kallsyms] [k] tcp_ack Lets use a 100% factor, and remove the loop. 100% is needed anyway for tcp_adv_win_scale=1 default value, and is also the maximum factor. Refs: commit b49960a0 ("tcp: change tcp_adv_win_scale and tcp_rmem[2]") Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
