- 06 Jun, 2015 10 commits
-
-
Andrea Arcangeli authored
commit e8fd5e9e upstream. memslot->userfault_addr is set by the kernel with a mmap executed from the kernel but the userland can still munmap it and lead to the below oops after memslot->userfault_addr points to a host virtual address that has no vma or mapping. [ 327.538306] BUG: unable to handle kernel paging request at fffffffffffffffe [ 327.538407] IP: [<ffffffff811a7b55>] put_page+0x5/0x50 [ 327.538474] PGD 1a01067 PUD 1a03067 PMD 0 [ 327.538529] Oops: 0000 [#1] SMP [ 327.538574] Modules linked in: macvtap macvlan xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT iptable_filter ip_tables tun bridge stp llc rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache xprtrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ipmi_devintf iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp dcdbas intel_rapl kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd pcspkr sb_edac edac_core ipmi_si ipmi_msghandler acpi_pad wmi acpi_power_meter lpc_ich mfd_core mei_me [ 327.539488] mei shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc mlx4_ib ib_sa ib_mad ib_core mlx4_en vxlan ib_addr ip_tunnel xfs libcrc32c sd_mod crc_t10dif crct10dif_common crc32c_intel mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm drm ahci i2c_core libahci mlx4_core libata tg3 ptp pps_core megaraid_sas ntb dm_mirror dm_region_hash dm_log dm_mod [ 327.539956] CPU: 3 PID: 3161 Comm: qemu-kvm Not tainted 3.10.0-240.el7.userfault19.4ca4011.x86_64.debug #1 [ 327.540045] Hardware name: Dell Inc. PowerEdge R420/0CN7CM, BIOS 2.1.2 01/20/2014 [ 327.540115] task: ffff8803280ccf00 ti: ffff880317c58000 task.ti: ffff880317c58000 [ 327.540184] RIP: 0010:[<ffffffff811a7b55>] [<ffffffff811a7b55>] put_page+0x5/0x50 [ 327.540261] RSP: 0018:ffff880317c5bcf8 EFLAGS: 00010246 [ 327.540313] RAX: 00057ffffffff000 RBX: ffff880616a20000 RCX: 0000000000000000 [ 327.540379] RDX: 0000000000002014 RSI: 00057ffffffff000 RDI: fffffffffffffffe [ 327.540445] RBP: ffff880317c5bd10 R08: 0000000000000103 R09: 0000000000000000 [ 327.540511] R10: 0000000000000000 R11: 0000000000000000 R12: fffffffffffffffe [ 327.540576] R13: 0000000000000000 R14: ffff880317c5bd70 R15: ffff880317c5bd50 [ 327.540643] FS: 00007fd230b7f700(0000) GS:ffff880630800000(0000) knlGS:0000000000000000 [ 327.540717] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 327.540771] CR2: fffffffffffffffe CR3: 000000062a2c3000 CR4: 00000000000427e0 [ 327.540837] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 327.540904] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 327.540974] Stack: [ 327.541008] ffffffffa05d6d0c ffff880616a20000 0000000000000000 ffff880317c5bdc0 [ 327.541093] ffffffffa05ddaa2 0000000000000000 00000000002191bf 00000042f3feab2d [ 327.541177] 00000042f3feab2d 0000000000000002 0000000000000001 0321000000000000 [ 327.541261] Call Trace: [ 327.541321] [<ffffffffa05d6d0c>] ? kvm_vcpu_reload_apic_access_page+0x6c/0x80 [kvm] [ 327.543615] [<ffffffffa05ddaa2>] vcpu_enter_guest+0x3f2/0x10f0 [kvm] [ 327.545918] [<ffffffffa05e2f10>] kvm_arch_vcpu_ioctl_run+0x2b0/0x5a0 [kvm] [ 327.548211] [<ffffffffa05e2d02>] ? kvm_arch_vcpu_ioctl_run+0xa2/0x5a0 [kvm] [ 327.550500] [<ffffffffa05ca845>] kvm_vcpu_ioctl+0x2b5/0x680 [kvm] [ 327.552768] [<ffffffff810b8d12>] ? creds_are_invalid.part.1+0x12/0x50 [ 327.555069] [<ffffffff810b8d71>] ? creds_are_invalid+0x21/0x30 [ 327.557373] [<ffffffff812d6066>] ? inode_has_perm.isra.49.constprop.65+0x26/0x80 [ 327.559663] [<ffffffff8122d985>] do_vfs_ioctl+0x305/0x530 [ 327.561917] [<ffffffff8122dc51>] SyS_ioctl+0xa1/0xc0 [ 327.564185] [<ffffffff816de829>] system_call_fastpath+0x16/0x1b [ 327.566480] Code: 0b 31 f6 4c 89 e7 e8 4b 7f ff ff 0f 0b e8 24 fd ff ff e9 a9 fd ff ff 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 <48> f7 07 00 c0 00 00 55 48 89 e5 75 2a 8b 47 1c 85 c0 74 1e f0 Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xiao Guangrong authored
commit 7cbeed9b upstream. Current permission check assumes that RSVD bit in PFEC is always zero, however, it is not true since MMIO #PF will use it to quickly identify MMIO access Fix it by clearing the bit if walking guest page table is needed Signed-off-by:
Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
-
Paolo Bonzini authored
commit 89876115 upstream. smep_andnot_wp is initialized in kvm_init_shadow_mmu and shadow pages should not be reused for different values of it. Thus, it has to be added to the mask in kvm_mmu_pte_write. Reviewed-by:
-
Ingo Molnar authored
commit e88221c5 upstream. The kernel's handling of 'compacted' xsave state layout is buggy: http://marc.info/?l=linux-kernel&m=142967852317199 I don't have such a system, and the description there is vague, but from extrapolation I guess that there were two kinds of bugs observed: - boot crashes, due to size calculations being wrong and the dynamic allocation allocating a too small xstate area. (This is now fixed in the new FPU code - but still present in stable kernels.) - FPU state corruption and ABI breakage: if signal handlers try to change the FPU state in standard format, which then the kernel tries to restore in the compacted format. These breakages are scary, but they only occur on a small number of systems that have XSAVES* CPU support. Yet we have had XSAVES support in the upstream kernel for a large number of stable kernel releases, and the fixes are involved and unproven. So do the safe resolution first: disable XSAVES* support and only use the standard xstate format. This makes the code work and is easy to backport. On top of this we can work on enabling (and testing!) proper compacted format support, without backporting pressure, on top of the new, cleaned up FPU code. Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Borislav Petkov authored
commit 17fea54b upstream. Derek noticed that a critical MCE gets reported with the wrong error type description: [Hardware Error]: CPU 34: Machine Check Exception: 5 Bank 9: f200003f000100b0 [Hardware Error]: RIP !INEXACT! 10:<ffffffff812e14c1> {intel_idle+0xb1/0x170} [Hardware Error]: TSC 49587b8e321cb [Hardware Error]: PROCESSOR 0:306e4 TIME 1431561296 SOCKET 1 APIC 29 [Hardware Error]: Some CPUs didn't answer in synchronization [Hardware Error]: Machine check: Invalid ^^^^^^^ The last line with 'Invalid' should have printed the high level MCE error type description we get from mce_severity, i.e. something like: [Hardware Error]: Machine check: Action required: data load error in a user process this happens due to the fact that mce_no_way_out() iterates over all MCA banks and possibly overwrites the @msg argument which is used in the panic printing later. Change behavior to take the message of only and the (last) critical MCE it detects. Reported-by:
Derek <denc716@gmail.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1431936437-25286-3-git-send-email-bp@alien8.deSigned-off-by:
-
Paolo Bonzini authored
commit 0fdd74f7 upstream. This reverts commit 4473b570. We'll use the hook again. Signed-off-by:
-
Will Deacon authored
commit 5dc5616e upstream. Stage 1 translation is controlled by two sets of page tables (TTBR0 and TTBR1) which grow up and down from zero respectively in the ARMv8 translation regime. For the SMMU, we only care about TTBR0 and, in the case of a 48-bit virtual space, we expect to map virtual addresses 0x0 through to 0xffff_ffff_ffff. Given that some masters may be incapable of emitting virtual addresses targetting TTBR1 (e.g. because they sit on a 48-bit bus), the SMMU architecture allows bit 47 to be sign-extended, halving the virtual range of TTBR0 but allowing TTBR1 to be used. This is controlled by the SEP field in TTBCR2. The SMMU driver incorrectly enables this sign-extension feature, which causes problems when userspace addresses are programmed into a master device with the SMMU expecting to map the incoming transactions via TTBR0; if the top bit of address is set, we will instead get a translation fault since TTBR1 walks are disabled in the TTBCR. This patch fixes the issue by disabling sign-extension of a fixed virtual address bit and instead basing the behaviour on the upstream bus size: the incoming address is zero extended unless the upstream bus is only 49 bits wide, in which case bit 48 is used as the sign bit and is replicated to the upper bits. Reported-by:
Varun Sethi <varun.sethi@freescale.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Oded Gabbay authored
commit 1bf1b431 upstream. This patch fixes a bug in put_pasid_state_wait that appeared in kernel 4.0 The bug is that pasid_state->count wasn't decremented before entering the wait_event. Thus, the condition in wait_event will never be true. The fix is to decrement (atomically) the pasid_state->count before the wait_event. Signed-off-by:
Oded Gabbay <oded.gabbay@amd.com> Signed-off-by:
-
Eric W. Biederman authored
commit 820f9f14 upstream. This is needed to support lazily umounting locked mounts. Because the entire unmounted subtree needs to stay together until there are no users with references to any part of the subtree. To support this guarantee that the fs_pin m_list and s_list nodes are initialized by initializing them in init_fs_pin allowing for the possibility that pin_insert_group does not touch them. Further use hlist_del_init in pin_remove so that there is a hlist_unhashed test before the list we attempt to update the previous list item. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit cd4a4017 upstream. The only users of collect_mounts are in audit_tree.c In audit_trim_trees and audit_add_tree_rule the path passed into collect_mounts is generated from kern_path passed an audit_tree pathname which is guaranteed to be an absolute path. In those cases collect_mounts is obviously intended to work on mounted paths and if a race results in paths that are unmounted when collect_mounts it is reasonable to fail early. The paths passed into audit_tag_tree don't have the absolute path check. But are used to play with fsnotify and otherwise interact with the audit_trees, so again operating only on mounted paths appears reasonable. Avoid having to worry about what happens when we try and audit unmounted filesystems by restricting collect_mounts to mounts that appear in the mount tree. Signed-off-by:
-
- 17 May, 2015 30 commits
-
-
Greg Kroah-Hartman authored
-
Lv Zheng authored
commit 1d0a0b2f upstream. ACPICA commit b60612373a4ef63b64a57c124576d7ddb6d8efb6 For physical addresses, since the address may exceed 32-bit address range after calculation, we should use 0x%8.8X%8.8X instead of ACPI_PRINTF_UINT and ACPI_FORMAT_UINT64() instead of ACPI_FORMAT_NATIVE_UINT()/ACPI_FORMAT_TO_UINT(). This patch also removes above replaced macros as there are no users. This is a preparation to switch acpi_physical_address to 64-bit on 32-bit kernel builds. Link: https://github.com/acpica/acpica/commit/b6061237Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Dirk Behme <dirk.behme@gmail.com> Signed-off-by:
George G. Davis <george_davis@mentor.com> Signed-off-by:
-
Lv Zheng authored
commit cc2080b0 upstream. ACPICA commit 7f06739db43a85083a70371c14141008f20b2198 For physical addresses, since the address may exceed 32-bit address range after calculation, we should use %8.8X%8.8X (see ACPI_FORMAT_UINT64()) to convert the %p formats. This is a preparation to switch acpi_physical_address to 64-bit on 32-bit kernel builds. Link: https://github.com/acpica/acpica/commit/7f06739dSigned-off-by:
-
Lv Zheng authored
commit 6d3fd3cc upstream. ACPICA commit 154f6d074dd38d6ebc0467ad454454e6c5c9ecdf There are code pieces converting pointers using "(acpi_physical_address) x" or "ACPI_CAST_PTR (t, x)" formats, this patch cleans up them. Known issues: 1. Cleanup of "(ACPI_PHYSICAL_ADDRRESS) x" for a table field For the conversions around the table fields, it is better to fix it with alignment also fixed. So this patch doesn't modify such code. There should be no functional problem by leaving them unchanged. Link: https://github.com/acpica/acpica/commit/154f6d07Signed-off-by:
-
Lv Zheng authored
commit f254e3c5 upstream. ACPICA commit 7d9fd64397d7c38899d3dc497525f6e6b044e0e3 OSPMs like Linux expect an acpi_physical_address returning value from acpi_find_root_pointer(). This triggers warnings if sizeof (acpi_size) doesn't equal to sizeof (acpi_physical_address): drivers/acpi/osl.c:275:3: warning: passing argument 1 of 'acpi_find_root_pointer' from incompatible pointer type [enabled by default] In file included from include/acpi/acpi.h:64:0, from include/linux/acpi.h:36, from drivers/acpi/osl.c:41: include/acpi/acpixf.h:433:1: note: expected 'acpi_size *' but argument is of type 'acpi_physical_address *' This patch corrects acpi_find_root_pointer(). Link: https://github.com/acpica/acpica/commit/7d9fd643Signed-off-by:
-
Al Viro authored
commit 86cc0584 upstream. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Alexey Khoroshilov authored
commit bc26d4d0 upstream. A deadlock can be initiated by userspace via ioctl(SNDCTL_SEQ_OUTOFBAND) on /dev/sequencer with TMR_ECHO midi event. In this case the control flow is: sound_ioctl() -> case SND_DEV_SEQ: case SND_DEV_SEQ2: sequencer_ioctl() -> case SNDCTL_SEQ_OUTOFBAND: spin_lock_irqsave(&lock,flags); play_event(); -> case EV_TIMING: seq_timing_event() -> case TMR_ECHO: seq_copy_to_input() -> spin_lock_irqsave(&lock,flags); It seems that spin_lock_irqsave() around play_event() is not necessary, because the only other call location in seq_startplay() makes the call without acquiring spinlock. So, the patch just removes spinlocks around play_event(). By the way, it removes unreachable code in seq_timing_event(), since (seq_mode == SEQ_2) case is handled in the beginning. Compile tested only. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Mark Rutland authored
commit c0978773 upstream. arm64 builds with GCC 5 have caused the __asmeq assertions in the PSCI calling code to fire, so move the ARM PSCI calls out of line into their own assembly file for consistency and to safeguard against the same issue occuring with the 32-bit toolchain. [will: brought into line with arm64 implementation] Reported-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Takeshi Kihara authored
commit bad4371d upstream. f9fd54f2 ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout") changed the timeout value from 1000 jiffies to 1s. In the case where HZ is 1000 the values are the same. However, for smaller HZ values the timeout is now smaller, 1s instead of 10s in the case of HZ=100. Since the timeout occurs in spite of a normal data transfer a timeout of 10s seems more appropriate. This restores the previous timeout in the case where HZ=100 and results in an increase over the previous timeout for larger values of HZ. Fixes: f9fd54f2 ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout") Signed-off-by:
Takeshi Kihara <takeshi.kihara.df@renesas.com> [horms: rewrote changelog to refer to HZ] Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Grygorii Strashko authored
commit 184af16b upstream. The PM_RESTORE_PREPARE is not handled now in mmc_pm_notify(), as result mmc_rescan() could be scheduled and executed at late hibernation restore stages when MMC device is suspended already - which, in turn, will lead to system crash on TI dra7-evm board: WARNING: CPU: 0 PID: 3188 at drivers/bus/omap_l3_noc.c:148 l3_interrupt_handler+0x258/0x374() 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4_PER1_P3 (Idle): Data Access in User mode during Functional access Hence, add missed PM_RESTORE_PREPARE PM event in mmc_pm_notify(). Fixes: 4c2ef25f (mmc: fix all hangs related to mmc/sd card...) Signed-off-by:
Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by:
-
Chuanxiao Dong authored
commit 4e93b9a6 upstream. During kernel boot, it will try to read some logical sectors of each block device node for the possible partition table. But since RPMB partition is special and can not be accessed by normal eMMC read / write CMDs, it will cause below error messages during kernel boot: ... mmc0: Got data interrupt 0x00000002 even though no data operation was in progress. mmcblk0rpmb: error -110 transferring data, sector 0, nr 32, cmd response 0x900, card status 0xb00 mmcblk0rpmb: retrying using single block read mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 end_request: I/O error, dev mmcblk0rpmb, sector 0 Buffer I/O error on device mmcblk0rpmb, logical block 0 end_request: I/O error, dev mmcblk0rpmb, sector 8 Buffer I/O error on device mmcblk0rpmb, logical block 1 end_request: I/O error, dev mmcblk0rpmb, sector 16 Buffer I/O error on device mmcblk0rpmb, logical block 2 end_request: I/O error, dev mmcblk0rpmb, sector 24 Buffer I/O error on device mmcblk0rpmb, logical block 3 ... This patch will discard the access request in eMMC queue if it is RPMB partition access request. By this way, it avoids trigger above error messages. Fixes: 090d25fe ("mmc: core: Expose access to RPMB partition") Signed-off-by:
Yunpeng Gao <yunpeng.gao@intel.com> Signed-off-by:
Chuanxiao Dong <chuanxiao.dong@intel.com> Tested-by:
Michael Shigorin <mike@altlinux.org> Signed-off-by:
-
Doug Anderson authored
commit c5272a28 upstream. Way back, when the world was a simpler place and there was no war, no evil, and no kernel bugs, there was just a single pinctrl lock. That was how the world was when (57291ce2 pinctrl: core device tree mapping table parsing support) was written. In that case, there were instances where the pinctrl mutex was already held when pinctrl_register_map() was called, hence a "locked" parameter was passed to the function to indicate that the mutex was already locked (so we shouldn't lock it again). A few years ago in (42fed7ba pinctrl: move subsystem mutex to pinctrl_dev struct), we switched to a separate pinctrl_maps_mutex. ...but (oops) we forgot to re-think about the whole "locked" parameter for pinctrl_register_map(). Basically the "locked" parameter appears to still refer to whether the bigger pinctrl_dev mutex is locked, but we're using it to skip locks of our (now separate) pinctrl_maps_mutex. That's kind of a bad thing(TM). Probably nobody noticed because most of the calls to pinctrl_register_map happen at boot time and we've got synchronous device probing. ...and even cases where we're asynchronous don't end up actually hitting the race too often. ...but after banging my head against the wall for a bug that reproduced 1 out of 1000 reboots and lots of looking through kgdb, I finally noticed this. Anyway, we can now safely remove the "locked" parameter and go back to a war-free, evil-free, and kernel-bug-free world. Fixes: 42fed7ba ("pinctrl: move subsystem mutex to pinctrl_dev struct") Signed-off-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Christian König authored
commit d52cdfa4 upstream. MPEG 2/4 are only supported since UVD3. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Christian König authored
commit a1b403da upstream. Invalid messages can crash the hw otherwise. Signed-off-by:
-
Christian König authored
commit 29c63fe2 upstream. Invalid handles can crash the hw. Signed-off-by:
-
monk.liu authored
commit db12973c upstream. Fixing a memory leak with userptrs. v2: clean up the loop, use an iterator instead v3: remove unused variable Signed-off-by:
monk.liu <monk.liu@amd.com> Signed-off-by:
-
Alex Deucher authored
commit d73a824a upstream. bug: https://bugzilla.kernel.org/show_bug.cgi?id=97701Reported-by:
Mikael Pettersson <mikpelinux@gmail.com> Tested-by:
-
Christian König authored
commit 013ead48 upstream. Hardware doesn't seem to work correctly, just block userspace in this case. v2: add missing defines Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=85320Signed-off-by:
-
Xihan Zhang authored
commit 79b066bd upstream. This patch fixes a bug where sdma vm wasn't initialized when an sdma queue was created in HWS mode. This caused GPUVM faults to appear on dmesg and it is one of the causes that SDMA queues are not working. Signed-off-by:
Xihan Zhang <xihan.zhang@amd.com> Reviewed-by:
Ben Goz <ben.goz@amd.comt> Signed-off-by:
Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by:
-
Oded Gabbay authored
commit 1e5ec956 upstream. Sometimes we might unregister process that have queues, because we couldn't preempt the queues. Until now we blocked it with BUG_ON but instead just print it as debug. Reviewed-by:
Ben Goz <ben.goz@amd.com> Signed-off-by:
-
Jani Nikula authored
commit 9fcb1704 upstream. The eDP port A register on PCH split platforms has a slightly different register layout from the other ports, with bit 6 being either alternate scrambler reset or reserved, depending on the generation. Our misinterpretation of the bit as audio has lead to warning. Fix this by not enabling audio on port A, since none of our platforms support audio on port A anyway. v2: DDI doesn't have audio on port A either (Sivakumar Thulasimani) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89958Reported-and-tested-by:
Chris Bainbridge <chris.bainbridge@gmail.com> Reviewed-by:
Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Lukas Wunner authored
commit 3916e3fd upstream. Single channel LVDS maxes out at 112 MHz. The 15" pre-retina models shipped with 1440x900 (106 MHz) by default or 1680x1050 (119 MHz) as a BTO option, both versions used dual channel LVDS even though the smaller one would have fit into a single channel. Notes: Bug report showing that the MacBookPro8,2 with 1440x900 uses dual channel LVDS (this lead to it being hardcoded in intel_lvds.c by Daniel Vetter with commit 618563e3): https://bugzilla.kernel.org/show_bug.cgi?id=42842 If i915.lvds_channel_mode=2 is missing even though the machine needs it, every other vertical line is white and consequently, only the left half of the screen is visible (verified by myself on a MacBookPro9,1). Forum posting concerning a MacBookPro6,2 with 1440x900, author is using i915.lvds_channel_mode=2 on the kernel command line, proving that the machine uses dual channels: https://bbs.archlinux.org/viewtopic.php?id=185770 Chi Mei N154C6-L04 with 1440x900 is a replacement panel for all MacBook Pro "A1286" models, and that model number encompasses the MacBookPro6,2 / 8,2 / 9,1. Page 17 of the panel's datasheet shows it's driven with dual channel LVDS: http://www.ebay.com/itm/-/400690878560 http://www.everymac.com/ultimate-mac-lookup/?search_keywords=A1286 http://www.taopanel.com/chimei/datasheet/N154C6-L04.pdf Those three 15" models, MacBookPro6,2 / 8,2 / 9,1, are the only ones with i915 graphics and dual channel LVDS, so that list should be complete. And the 8,2 is already in intel_lvds.c. Possible motivation to use dual channel LVDS even on the 1440x900 models: Reduce the number of different parts, i.e. use identical logic boards and display cabling on both versions and the only differing component is the panel. Signed-off-by:
Lukas Wunner <lukas@wunner.de> Acked-by:
-
Lukas Wunner authored
commit 6f317cfe upstream. Single channel LVDS maxes out at 112 MHz, anything above must be dual channel. This avoids the need to specify i915.lvds_channel_mode=2 on all 17" MacBook Pro models with i915 graphics since they had 1920x1200 (193 MHz), plus those 15" pre-retina models which had a resolution of 1680x1050 (119 MHz) as a BTO option. Source for 112 MHz limit of single channel LVDS is section 2.3 of: https://01.org/linuxgraphics/sites/default/files/documentation/ivb_ihd_os_vol3_part4.pdf v2: Avoid hardcoding 17" models by assuming dual channel LVDS if the resolution necessitates it, suggested by Jani Nikula. v3: Fix typo, thanks Joonas Lahtinen. v4: Split commit in two, suggested by Ville Syrjälä. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> [Jani: included spec reference into the commit message] Signed-off-by:
-
Mario Kleiner authored
commit fdb68e09 upstream. Since commit 844b03f2 we make sure that after vblank irq off, we return the last valid (vblank count, vblank timestamp) pair to clients, e.g., during modesets, which is good. An overlooked side effect of that commit for kms drivers without support for precise vblank timestamping is that at vblank irq enable, when we update the vblank counter from the hw counter, we can't update the corresponding vblank timestamp, so now we have a totally mismatched timestamp for the new count to confuse clients. Restore old client visible behaviour from before Linux 3.17, but zero out the timestamp at vblank counter update (instead of disable as in original implementation) if we can't generate a meaningful timestamp immediately for the new vblank counter. This will fix this regression, so callers know they need to retry again later if they need a valid timestamp, but at the same time preserves the improvements made in the commit mentioned above. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> #v3.17+ Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Ulf Hansson authored
commit 11133db7 upstream. Fixes: c94a4ab7 ("ARM: ux500: Disable the MMCI gpio-regulator by default") Signed-off-by:
Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by:
-
Ulf Hansson authored
commit f9a8c391 upstream. Fixes: c94a4ab7 ("ARM: ux500: Disable the MMCI gpio-regulator by default") Signed-off-by:
-
Ulf Hansson authored
commit 53d26698 upstream. The GPIO regulator for the SD-card isn't a ux500 SOC configuration, but instead it's specific to the board. Move the definition of it, into the board DTSs. Fixes: c94a4ab7 ("ARM: ux500: Disable the MMCI gpio-regulator by default") Signed-off-by:
-
Nicolas Schichan authored
commit 19fc99d0 upstream. In that case, emit_udiv() will be called with rn == ARM_R0 (r_scratch) and loading rm first into ARM_R0 will result in jit_udiv() function being called the same dividend and divisor. Fix that by loading rn first into ARM_R1 and then rm into ARM_R0. Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Fixes: aee636c4 (bpf: do not use reciprocal divide) Acked-by:
Mircea Gherzan <mgherzan@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Tony Lindgren authored
commit 102bcb6e upstream. If we use a combination of VMODE and I2C4 for retention modes, eventually the off idle power consumption will creep up by about 23mW, even during off mode with I2C4 always staying enabled. Turns out this is because of erratum i531 "Extra Power Consumed When Repeated Start Operation Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)" as pointed out by Nishanth Menon <nm@ti.com>. Let's fix the issue by adding i2c_cfg_clear_mask for the bits to clear when initializing the I2C4 adapter so we can clear SREN bit that drives the I2C4 lines low otherwise when there is no traffic. Fixes: 3b8c4ebb ("ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode") Cc: Kevin Hilman <khilman@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Reviewed-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Gregory CLEMENT authored
commit 750e30d4 upstream. There is no crystal connected to the internal RTC on the Open Block AX3. So let's disable it in order to prevent the kernel probing the driver uselessly. Eventually this patches removes the following warning message from the boot log: "rtc-mv d0010300.rtc: internal RTC not ticking" Acked-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
