- 31 Aug, 2016 18 commits
-
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
-
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it shouldn't have functional changes. Since no am4372 based board had a memory node defined, a dummy node is added so the compiled DTB memory node is the same than before. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" But these boards don't have a memory node defined, so removing the skeleton.dtsi inclusion from omap3.dtsi will cause a change in the compiled DTB. Add a dummy memory node so the compiled DTB doesn't change if the skeleton.dtsi is removed from omap3.dtsi. Eventually the correct starting addresses and sizes should be used but I didn't find that information. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" But the sl50 board doesn't have a, so removing the skeleton.dtsi inclusion from am33xx.dtsi will cause a change in the compiled DTB. The board has 512 MiB of RAM and its starting address is 0x80000000, so add a proper memory device node in the DTS. Signed-off-by: -
Grygorii Strashko authored
Current clocks tree definition for CPSW/CPTS doesn't correspond TRM for dra7/am57 SoCs. CPTS: has to be sourced from gmac_rft_clk_mux clock CPSW: DPLL_GMAC -> CLKOUT_M2 -> GMAC_250M_CLK -> 1/2 -> -> GMAC_MAIN_CLK (125 MHZ) Hence, correct clock tree for GMAC_MAIN_CLK and use proper clock for CPTS. This also require updating of CPTS clock multiplier. Signed-off-by:Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
Mugunthan V N <mugunthanvnm@ti.com> Acked-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
J.D. Schroeder authored
This commit fixes the clock data inside the DRA7xx clocks device tree structure for the gmac_gmii_ref_clk_div clock. This clock is actually the GMAC_MAIN_CLK and has nothing to do with the register at address 0x4a0093d0. If CLKSEL_REF bit 24 inside of CM_GMAC_GMAC_CLKCTRL, is set to 1 in order to use the GMAC_RMII_CLK instead of the GMAC_RMII_HS_CLK, the kernel generates a clock divider warning: WARNING: CPU: 0 PID: 0 at drivers/clk/clk-divider.c:129 clk_divider_recalc_rate+0xa8/0xe0() gmac_gmii_ref_clk_div: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set By properly configuring the gmac_gmii_ref_clk_div (GMAC_MAIN_CLK) to have the parent of dpll_gmac_m2_ck always divided by 2 the warning is resolved and the clock tree is fixed up. Additionally, a new clock called rmii_50mhz_clk_mux is defined that does utilize CM_GMAC_GMAC_CLKCTRL[24] CLKSEL_REF to configure the source clock for the RMII_50MHZ_CLK. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:J.D. Schroeder <jay.schroeder@garmin.com> Reviewed-by:
Trenton Andres <trenton.andres@garmin.com> Signed-off-by:
-
- 30 Aug, 2016 2 commits
-
-
Kishon Vijay Abraham I authored
Since DRA7 has multiple PCIe Rootcomplex, add "linux,pci-domain" property to assign a PCI domain number to each of the host bridges. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Vignesh R authored
AM335x ICE board has a rotary-switch connected to PCA9536 I2C GPIO expander. The position of the rotary-switch is reflected by status of GPIO lines. Add gpio-decoder node to read these GPIO line status via gpio-decoder driver and report it as an input event to the system. Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
- 29 Aug, 2016 1 commit
-
-
Adam Ford authored
Support is in the device tree, but they are not mentioned here. Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
-
- 26 Aug, 2016 11 commits
-
-
Sekhar Nori authored
Silicon limitation i845 documents how to cope with false disconnection condition on USB2 PHY. Reference: AM572x silicon errata document SPRZ429H, revised January 2016. Using compatible "ti,dra7x-usb2" enables the recommended software workaround for this issue. Use it for USB1 PHY. The workaround is already in place for USB2 PHY. Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Stefan Müller-Klieser authored
The wega board has a TLV320AIC3007 connected via McASP0. In the default configuration, no external crystal is mounted. We run a system clock of 25 MHz, so we use the audio codec PLL for audio clock generation. Signed-off-by:
Stefan Müller-Klieser <s.mueller-klieser@phytec.de> Reviewed-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Vignesh R authored
AM572x IDK has a Spansion s25fl256s1 QSPI flash on the EVM connected to TI QSPI IP over CS0. Hence, add QSPI and flash slave DT nodes. Signed-off-by:
-
Vignesh R authored
According to AM572x DM SPRS953A, QSPI maximum bus speed can be 76.8MHz. Therefore, increase the spi-max-frequency value of QSPI node to 76.8MHz for DRA74 and DRA72 evm. This improves flash raw read speed by ~2MB/s. Signed-off-by:
-
Keerthy authored
With the device tree parsing using the regulator framework there is a no longer a need for separate compatibles for individual regulator nodes. Hence removing them all. Signed-off-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
-
Keerthy authored
With the device tree parsing using the regulator framework there is a no longer a need for separate compatibles for individual regulator nodes. Hence removing them all. Signed-off-by:
-
Keerthy authored
With the device tree parsing using the regulator framework there is a no longer a need for separate compatibles for individual regulator nodes. Hence removing them all. Signed-off-by:
-
Keerthy authored
With the device tree parsing using the regulator framework there is a no longer a need for separate compatibles for individual regulator nodes. Hence removing them all. Signed-off-by:
-
Tero Kristo authored
Without this, the memory will remain active during poweroff consuming extra power. Please note revision 2.1 PMIC seems to fail when DCDC3 disable is attempted, so this is not done on that PMIC revision. The PMIC revision checks in the regulator patches make sure of this. Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
-
Tero Kristo authored
Without this, the memory will remain active during poweroff consuming extra power. Signed-off-by:
-
Keerthy authored
dcdc3, dcdc5, dcdc6 supply ddr and rtc respectively. These are required to be on during suspend. Hence set the state accordingly. Signed-off-by:
-
- 15 Aug, 2016 8 commits
-
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings for many boards: "Node /leds/led@1 has a unit name, but no reg property" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings for many boards: "Node /leds/led@1 has a unit name, but no reg property" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings for many boards: "Node /gpio_keys/button0@10 has a unit name, but no reg property" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings for many boards: "Node /gpio_keys/button0@10 has a unit name, but no reg property" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings for many boards: "Node /fixedregulator@0 has a unit name, but no reg property" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings for many boards: "Node /fixedregulator@0 has a unit name, but no reg property" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings for many boards: "Node /fixedregulator@0 has a unit name, but no reg property" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings for many boards: "Node /matrix_keypad@0 has a unit name, but no reg property" Signed-off-by:
-
