- 06 Mar, 2020 13 commits
-
-
Monk Liu authored
Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Acked-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Yong Zhao authored
Because too many things are involved in this workaround, we need more comments to avoid pitfalls. Signed-off-by:
Yong Zhao <Yong.Zhao@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Philip Yang <philip.yang@amd.com> Signed-off-by:
-
Yong Zhao authored
Add "CP" to AMDGPU_GEM_CREATE_MQD_GFX9 to indicate it is only for CP MQD buffer. Signed-off-by:
-
Andrey Grodzovsky authored
Problem: During GU reset PSP's sysfs was being wrongly reinitilized during call to amdgpu_device_ip_late_init which was failing with duplicate error. Fix: Move psp_sysfs_init to psp_sw_init to avoid this. Add guards in sysfs file's read and write hook agains premature call if PSP is not finished initialization. Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
-
Jacob He authored
SPM access the video memory according to SPM_VMID. It should be updated with the job's vmid right before the job is scheduled. SPM_VMID is a global resource Signed-off-by:
Jacob He <jacob.he@amd.com> Reviewed-by:
-
John Clements authored
check UMC status and exit prior to making and erroneus register access this resolved unexpected behaviour with UMC indexing mode broadcasting writes Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
John Clements <john.clements@amd.com> Signed-off-by:
-
Guchun Chen authored
On arcturus, DF-Cstate needs to be toggled off/on before and after accessing UMC error counter and error address registers, otherwise, clearing such registers may fail. Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
John Clements authored
mitigates race condition on BACO reset between GPU bootcode and driver reload Reviewed-by:
-
Hawking Zhang authored
add arcturus xgmi/wafl pcs err status group to support PCS error detection and report on arcturus Signed-off-by:
-
Hawking Zhang authored
Now driver will report XGMI/WAFL PCS error through sysfs xgmi_wafl_err_count node on Vega20 Signed-off-by:
-
Hawking Zhang authored
Since from vega20, hardware supports run-time detect and report XGMI/WAFL PCS ras error. Add helper functions to walkthrough every type of ras error and report it if any. Signed-off-by:
-
Hawking Zhang authored
add wafl2 smn address and shift mask definition header files Signed-off-by:
-
Hawking Zhang authored
add xgmi ip smn address and shift mask header files Signed-off-by:
-
- 05 Mar, 2020 27 commits
-
-
Nathan Chancellor authored
Clang warns: drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:147:31: warning: address of 'pipe_ctx->plane_res' will always evaluate to 'true' [-Wpointer-bool-conversion] if (!pipe_ctx || !&pipe_ctx->plane_res || !&pipe_ctx->stream_res) ~ ~~~~~~~~~~^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:147:56: warning: address of 'pipe_ctx->stream_res' will always evaluate to 'true' [-Wpointer-bool-conversion] if (!pipe_ctx || !&pipe_ctx->plane_res || !&pipe_ctx->stream_res) ~ ~~~~~~~~~~^~~~~~~~~~ 2 warnings generated. As long as pipe_ctx is not NULL, the address of members in this struct cannot be NULL, which means these checks will always evaluate to false. Fixes: 4c1a1335 ("drm/amd/display: Driverside changes to support PSR in DMCUB") Link: https://github.com/ClangBuiltLinux/linux/issues/915Reviewed-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Hersen Wu authored
This interface is for dGPU Navi1x. Linux dc-pplib interface depends on window driver dc implementation. For Navi1x, clock settings of dcn watermarks are fixed. the settings should be passed to smu during boot up and resume from s3. boot up: dc calculate dcn watermark clock settings within dc_create, dcn20_resource_construct, then call pplib functions below to pass the settings to smu: smu_set_watermarks_for_clock_ranges smu_set_watermarks_table navi10_set_watermarks_table smu_write_watermarks_table For Renoir, clock settings of dcn watermark are also fixed values. dc has implemented different flow for window driver: dc_hardware_init / dc_set_power_state dcn10_init_hw notify_wm_ranges set_wm_ranges For Linux smu_set_watermarks_for_clock_ranges renoir_set_watermarks_table smu_write_watermarks_table dc_hardware_init -> amdgpu_dm_init dc_set_power_state --> dm_resume therefore, linux dc-pplib interface of navi10/12/14 is different from that of Renoir. v2: add missing unlock in error case Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Andrey Grodzovsky authored
To avoid compile errors on other platforms. Signed-off-by:
-
Andrey Grodzovsky authored
Starts USBC PD FW download and reads back the latest FW version. v2: Move sysfs file creation to late init Add locking around PSP calls to avoid concurrent access to PSP's C2P registers Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
-
Andrey Grodzovsky authored
Add the programming sequence. v2: Change donwload wait loop to more efficient. Move C2PMSG_CMD_GFX_USB_PD_FW_VER defintion v3: Fix lack of loop counter increment typo v4: Remove superflous status reg read Signed-off-by:
-
Andrey Grodzovsky authored
Used to load power Delivery FW to PSP. Signed-off-by:
-
Hawking Zhang authored
The ROMC_INDEX/DATA offset was changed to e4/e5 since from smuio_v11 (vega20/arcturus). Signed-off-by:
Candice Li <Candice.Li@amd.com> Reviewed-by:
-
Hawking Zhang authored
HDP ras error counters are dirty ones after cold reboot Read operation is needed to reset them to 0 Signed-off-by:
-
Hawking Zhang authored
GFX ras error counters are dirty ones after cold reboot Read operation is needed to reset them to 0 Signed-off-by:
-
Hawking Zhang authored
MMHUB ras error counters are dirty ones after cold reboot Read operation is needed to reset them to 0 Signed-off-by:
-
Hawking Zhang authored
SDMA ras error counters are dirty ones after cold reboot Read operation is needed to reset them to 0 Signed-off-by:
-
jianzh authored
Navi12 VK CTS subtest timestamp.calibrated.dev_domain_test failed because mmRLC_CAPTURE_GPU_CLOCK_COUNT register cannot be written in VF due to security policy. Solution: use a VF-accessible timestamp register pair mmGOLDEN_TSC_COUNT_LOWER/UPPER for SRIOV case. v2: according to Deucher Alexander's advice, switch to mmGOLDEN_TSC_COUNT_LOWER/UPPER for both bare metal and SRIOV. Signed-off-by:
jianzh <Jiange.Zhao@amd.com> Reviewed-by:
-
Prike Liang authored
When hit COMBINATIONAL_BYPASS the mclk will be bypass and can export fclk frequency to user usage. Signed-off-by:
Prike Liang <Prike.Liang@amd.com> Reviewed-by:
-
Prike Liang authored
This fix will handle some MP1 FW issue like as mclk dpm table in renoir has a reverse dpm clock layout and a zero frequency dpm level as following case. cat pp_dpm_mclk 0: 1200Mhz 1: 1200Mhz 2: 800Mhz 3: 0Mhz Signed-off-by:
-
Tiecheng Zhou authored
With new L1 policy, some regs are blocked at guest and they are programed at host side. So skip programing the regs under sriov. the regs are: GCMC_VM_FB_LOCATION_TOP GCMC_VM_FB_LOCATION_BASE MMMC_VM_FB_LOCATION_TOP MMMC_VM_FB_LOCATION_BASE GCMC_VM_SYSTEM_APERTURE_HIGH_ADDR GCMC_VM_SYSTEM_APERTURE_LOW_ADDR MMMC_VM_SYSTEM_APERTURE_HIGH_ADDR MMMC_VM_SYSTEM_APERTURE_LOW_ADDR HDP_NONSURFACE_BASE HDP_NONSURFACE_BASE_HI GCMC_VM_AGP_TOP GCMC_VM_AGP_BOT GCMC_VM_AGP_BASE Acked-by:
Tiecheng Zhou <Tiecheng.Zhou@amd.com> Signed-off-by:
-
abdoulaye berthe authored
[Why] Some lttpr devices do not work properly when lttpr mode is configured after link settings. [How] Move lttpr configuration before lane settings. Signed-off-by:
abdoulaye berthe <abdoulaye.berthe@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Eric Bernstein authored
[Why] Logger mask was updated to uint64_t, however default mask definition was not updated for unsigned long long [How] Update DC_DEFAULT_LOG_MASK to support uint64_t type Signed-off-by:
Eric Bernstein <eric.bernstein@amd.com> Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
Wyatt Wood authored
[Why] Moving ABM from DMCU to DMCUB. [How] Add ABM command structs. Signed-off-by:
Wyatt Wood <wyatt.wood@amd.com> Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
-
Bhawanpreet Lakha authored
[Why] If we have a single MST display and we disconnect it, we dont disable that link. This causes the old link settings to still exist Now on a replug for MST we think its a link loss and will try to reallocate mst payload which will fail, throwing warning below. [ 129.374192] [drm] Failed to updateMST allocation table forpipe idx:0 [ 129.374206] ------------[ cut here ]------------ [ 129.374284] WARNING: CPU: 14 PID: 1710 at drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc_link.c:3153 dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374285] Modules linked in: amdgpu(OE) amd_iommu_v2 gpu_sched ttm drm_kms_helper drm fb_sys_fops syscopyarea sysfillrect sysimgblt binfmt_misc nls_iso8859_1 edac_mce_amd snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio kvm snd_hda_codec_hdmi snd_hda_intel snd_intel_nhlt snd_hda_codec irqbypass snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul snd_seq crc32_pclmul ghash_clmulni_intel snd_seq_device snd_timer snd aesni_intel eeepc_wmi crypto_simd asus_wmi joydev cryptd sparse_keymap input_leds soundcore video glue_helper wmi_bmof mxm_wmi k10temp ccp mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid igb i2c_algo_bit ahci dca i2c_piix4 libahci gpio_amdpt wmi gpio_generic [ 129.374318] CPU: 14 PID: 1710 Comm: kworker/14:2 Tainted: G W OE 5.4.0-rc7bhawan+ #480 [ 129.374318] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 0515 03/30/2017 [ 129.374397] Workqueue: events dm_irq_work_func [amdgpu] [ 129.374468] RIP: 0010:dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374470] Code: 52 20 e8 1c 63 ad f4 48 8b 5d d0 65 48 33 1c 25 28 00 00 00 b8 01 00 00 00 75 16 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b e9 fa fe ff ff e8 ed 5b d6 f3 41 0f b6 b6 c4 02 00 00 48 c7 [ 129.374471] RSP: 0018:ffff9f9141e7fcc0 EFLAGS: 00010246 [ 129.374472] RAX: 0000000000000000 RBX: ffff91ef0762f800 RCX: 0000000000000000 [ 129.374473] RDX: 0000000000000005 RSI: ffffffffc0c4a988 RDI: 0000000000000004 [ 129.374474] RBP: ffff9f9141e7fd10 R08: 0000000000000005 R09: 0000000000000000 [ 129.374475] R10: 0000000000000002 R11: 0000000000000001 R12: ffff91eebd510c00 [ 129.374475] R13: ffff91eebd510e58 R14: ffff91ef052c01b8 R15: 0000000000000006 [ 129.374476] FS: 0000000000000000(0000) GS:ffff91ef0ef80000(0000) knlGS:0000000000000000 [ 129.374477] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 129.374478] CR2: 000055623ea01d50 CR3: 0000000408a8c000 CR4: 00000000003406e0 [ 129.374479] Call Trace: [ 129.374550] dc_link_reallocate_mst_payload+0x12e/0x150 [amdgpu] [ 129.374617] dc_link_handle_hpd_rx_irq+0x6d4/0x6e0 [amdgpu] [ 129.374693] handle_hpd_rx_irq+0x77/0x310 [amdgpu] [ 129.374768] dm_irq_work_func+0x53/0x70 [amdgpu] [ 129.374774] process_one_work+0x1fd/0x3f0 [ 129.374776] worker_thread+0x255/0x410 [ 129.374778] kthread+0x121/0x140 [ 129.374780] ? process_one_work+0x3f0/0x3f0 [ 129.374781] ? kthread_park+0x90/0x90 [ 129.374785] ret_from_fork+0x22/0x40 [How] when we disable MST we should clear the cur link settings (lane_count=0 is good enough). This will cause us to not reallocate payloads earlier than expected and not throw the warning Signed-off-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by:
-
Nikola Cornij authored
Disabling FEC for specific monitors is sometimes required for debugging while in the monitor bringup phase Signed-off-by:
Nikola Cornij <nikola.cornij@amd.com> Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Acked-by:
-
Sung Lee authored
[WHY] We see an issue that caused clk_optimized_required to be set true in certain cases, causing passive flips to fail. This is because of a typo where wm_optimized_required was set twice. [HOW] Set clk_optimized_required to false after updating clocks. Signed-off-by:
Sung Lee <sung.lee@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Yongqiang Sun authored
[Why] vstartup calculation is incorrect due to use 2 number of cursors and result in an underflow when playing video in full screen mode and combines graphic plane and video plane. [How] Apply new policy for dml calculation. 1 cursor for graphic plane, 0 cursor for video plane. Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by:
-
Josip Pavic authored
[Why] Swath sizes are being calculated incorrectly. The horizontal swath size should be the product of block height, viewport width, and bytes per element, but the calculation uses viewport height instead of width. The vertical swath size is similarly incorrectly calculated. The effect of this is that we report the wrong DCC caps. [How] Use viewport width in the horizontal swath size calculation and viewport height in the vertical swath size calculation. Signed-off-by:
Josip Pavic <Josip.Pavic@amd.com> Reviewed-by:
-
Michael Strauss authored
[WHY] Freesync borderless is not meant to be enabled on any APUs [HOW] Add is_apu cap to dcn21_resource_construct for correct recognition Signed-off-by:
Michael Strauss <michael.strauss@amd.com> Reviewed-by:
-
Sung Lee authored
[WHY] SMU FW previously had an issue with lowering display clock to below 100 MHz, and a workaround was put in to limit it. Newest SMU FW does not have this issue, and no longer needs the 100MHz cap. [HOW] Remove the 100MHz cap based on the SMU FW version. Signed-off-by:
-
George Shen authored
[Why] When transitioning from SST to MST, the HDCP repeater in some MST displays will enter a bad state. The HDCP repeater is recovered after failing and performing authentication again. [How] Add monitor patch to trigger HDCP authentication failure after encryption is enabled and re-authenticate. Signed-off-by:
George Shen <george.shen@amd.com> Reviewed-by:
-
