- 19 Jul, 2020 1 commit
-
-
Paul Cercueil authored
Silence compiler warning about used but uninitialized 'ipu_state' variable. In practice, the variable would never be used when uninitialized, but the compiler cannot know that 'priv->ipu_plane' will always be NULL if CONFIG_INGENIC_IPU is disabled. Silence the warning by initializing the value to NULL. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200719093834.14084-1-paul@crapouillou.net
-
- 16 Jul, 2020 27 commits
-
-
Paul Cercueil authored
Bump version to 1.1 and set date to 2020-07-16. v3: New patch Signed-off-by:
-
Paul Cercueil authored
Support multiple panels or bridges connected to the same DPI output of the SoC. This setup can be found for instance on the GCW Zero, where the same DPI output interfaces the internal 320x240 TFT panel, and the ITE IT6610 HDMI chip. v2: No change v3: Allow > 80-char lines where it makes sense Signed-off-by:
-
Paul Cercueil authored
Add support for the Image Processing Unit (IPU) found in all Ingenic SoCs. The IPU can upscale and downscale a source frame of arbitrary size ranging from 4x4 to 4096x4096 on newer SoCs, with bicubic filtering on newer SoCs, bilinear filtering on older SoCs. Nearest-neighbour can also be obtained with proper coefficients. Starting from the JZ4725B, the IPU supports a mode where its output is sent directly to the LCDC, without having to be written to RAM first. This makes it possible to use the IPU as a DRM plane on the compatible SoCs, and have it convert and scale anything the userspace asks for to what's available for the display. Regarding pixel formats, older SoCs support packed YUV 4:2:2 and various planar YUV formats. Newer SoCs introduced support for RGB. Since the IPU is a separate hardware block, to make it work properly the Ingenic DRM driver will now register itself as a component master in case the IPU driver has been enabled in the config. When enabled in the config, the CRTC will see the IPU as a second primary plane. It cannot be enabled at the same time as the regular primary plane. It has the same priority, which means that it will also display below the overlay plane. v2: - ingenic-ipu is no longer its own module. It will be built into the ingenic-drm module. - If enabled in the config, both the core driver and the IPU driver will register as components; otherwise the core driver will bypass that and call the ingenic_drm_bind() function directly. - Since both files now build into the same module, the symbols previously exported as GPL are not exported anymore, since they are only used internally. - Fix SPDX license header in ingenic-ipu.h - Avoid using 'for(;;);' loops without trailing statement(s) v3: - Pass priv structure to IRQ handler; that way we don't hardcode the expectation that the IPU plane is at index #0. - Rework osd_changed() to account for src_* changes - Add multiplanar YUV 4:4:4 support - Commit fb addresses to HW at vblank, since addr registers are not shadow registers - Probe IPU component later so that IPU plane is last - Fix driver not working on IPU-less hardware - Use IPU driver's name as the IRQ name to avoid having two 'ingenic-drm' in /proc/interrupts - Fix IPU only working for still images on JZ4725B - Add a bit more code comments Signed-off-by: -
Paul Cercueil authored
All Ingenic SoCs starting from the JZ4725B support OSD mode. In this mode, two separate planes can be used. They can have different positions and sizes, and one can be overlayed on top of the other. v2: Use fallthrough; instead of /* fall-through */ v3: - Add custom atomic_tail function to handle case where HW gives no VBLANK - Use regmap_set_bits() / regmap_clear_bits() when possible - Use dma_hwdesc_f{0,1} fields in priv structure instead of array - Use dmam_alloc_coherent() instead of dma_alloc_coherent() - Use more meaningful 0xf0 / 0xf1 values as DMA descriptors IDs - Add a bit more code comments Signed-off-by: -
Paul Cercueil authored
Use dmam_alloc_coherent() instead of dma_alloc_coherent(). Then we don't need to register a custom cleanup handler. v3: New patch Signed-off-by:
-
Paul Cercueil authored
Move the register definitions to ingenic-drm.h, to keep ingenic-drm-drv.c tidy. v2: Fix SPDX license tag v3: No change Signed-off-by:
-
Paul Cercueil authored
The address of the DMA descriptor never changes. It can therefore be set in the probe function. v2-v3: No change Signed-off-by:
-
Paul Cercueil authored
If you pass a string that is not terminated with a carriage return to dev_err(), it will eventually be printed with a carriage return, but not right away, since the kernel will wait for a pr_cont(). v2: New patch v3: No change Signed-off-by:
-
Paul Cercueil authored
Full rename without any modification, except to the Makefile. Renaming ingenic-drm.c to ingenic-drm-drv.c allow to decouple the module name from the source file name in the Makefile. This will be useful later when more source files are added. v2: New patch v3: No change Signed-off-by:
-
Paul Cercueil authored
Add documentation of the Device Tree bindings for the Image Processing Unit (IPU) found in most Ingenic SoCs. v2: Add missing 'const' in items list v3: No change Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Paul Cercueil authored
Convert the ingenic,lcd.txt to a new ingenic,lcd.yaml file. In the process, the new ingenic,jz4780-lcd compatible string has been added. v2: Add info about IPU at port@8 v3: No change Signed-off-by:
-
Paul Cercueil authored
plane->index is NOT the index of the color plane in a YUV frame. Actually, a YUV frame is represented by a single drm_plane, even though it contains three Y, U, V planes. v2-v3: No change Cc: stable@vger.kernel.org # v5.3 Fixes: 90b86fcc ("DRM: Add KMS driver for the Ingenic JZ47xx SoCs") Signed-off-by:
-
Lyude Paul authored
While I had thought I'd tested this before, it looks like this one issue slipped by my original CRC patches. Basically, there seem to be a few rules we need to follow when sending CRC commands to the display controller: * CRCs cannot be both disabled and enabled for a single head in the same flush * If a head with CRC reporting enabled switches from one OR to another, there must be a flush before the OR is re-enabled regardless of the final state of CRC reporting. So, split nv50_crc_atomic_prepare_notifier_contexts() into two functions: * nv_crc_atomic_release_notifier_contexts() - checks whether the CRC notifier contexts were released successfully after the first flush * nv_crc_atomic_init_notifier_contexts() - prepares any CRC notifier contexts for use before enabling reporting Additionally, in order to force a flush when we re-assign ORs with heads that have CRCs enabled we split our atomic check function into two: * nv50_crc_atomic_check_head() - called from our heads' atomic checks, determines whether a state needs to set or clear CRC reporting * nv50_crc_atomic_check_outp() - called at the end of the atomic check after all ORs have been added to the atomic state, and sets nv50_atom->flush_disable if needed Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Ben Skeggs <skeggsb@gmail.com> Acked-by:
Dave Airlie <airlied@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200629223635.103804-1-lyude@redhat.com
-
Lyude Paul authored
This introduces support for CRC readback on gf119+, using the documentation generously provided to us by Nvidia: https://github.com/NVIDIA/open-gpu-doc/blob/master/Display-CRC/display-crc.txt We expose all available CRC sources. SF, SOR, PIOR, and DAC are exposed through a single set of "outp" sources: outp-active/auto for a CRC of the scanout region, outp-complete for a CRC of both the scanout and blanking/sync region combined, and outp-inactive for a CRC of only the blanking/sync region. For each source, nouveau selects the appropriate tap point based on the output path in use. We also expose an "rg" source, which allows for capturing CRCs of the scanout raster before it's encoded into a video signal in the output path. This tap point is referred to as the raster generator. Note that while there's some other neat features that can be used with CRC capture on nvidia hardware, like capturing from two CRC sources simultaneously, I couldn't see any usecase for them and did not implement them. Nvidia only allows for accessing CRCs through a shared DMA region that we program through the core EVO/NvDisplay channel which is referred to as the notifier context. The notifier context is limited to either 255 (for Fermi-Pascal) or 2047 (Volta+) entries to store CRCs in, and unfortunately the hardware simply drops CRCs and reports an overflow once all available entries in the notifier context are filled. Since the DRM CRC API and igt-gpu-tools don't expect there to be a limit on how many CRCs can be captured, we work around this in nouveau by allocating two separate notifier contexts for each head instead of one. We schedule a vblank worker ahead of time so that once we start getting close to filling up all of the available entries in the notifier context, we can swap the currently used notifier context out with another pre-prepared notifier context in a manner similar to page flipping. Unfortunately, the hardware only allows us to this by flushing two separate updates on the core channel: one to release the current notifier context handle, and one to program the next notifier context's handle. When the hardware processes the first update, the CRC for the current frame is lost. However, the second update can be flushed immediately without waiting for the first to complete so that CRC generation resumes on the next frame. According to Nvidia's hardware engineers, there isn't any cleaner way of flipping notifier contexts that would avoid this. Since using vblank workers to swap out the notifier context will ensure we can usually flush both updates to hardware within the timespan of a single frame, we can also ensure that there will only be exactly one frame lost between the first and second update being executed by the hardware. This gives us the guarantee that we're always correctly matching each CRC entry with it's respective frame even after a context flip. And since IGT will retrieve the CRC entry for a frame by waiting until it receives a CRC for any subsequent frames, this doesn't cause an issue with any tests and is much simpler than trying to change the current DRM API to accommodate. In order to facilitate testing of correct handling of this limitation, we also expose a debugfs interface to manually control the threshold for when we start trying to flip the notifier context. We will use this in igt to trigger a context flip for testing purposes without needing to wait for the notifier to completely fill up. This threshold is reset to the default value set by nouveau after each capture, and is exposed in a separate folder within each CRTC's debugfs directory labelled "nv_crc". Changes since v1: * Forgot to finish saving crc.h before saving, whoops. This just adds some corrections to the empty function declarations that we use if CONFIG_DEBUG_FS isn't enabled. Changes since v2: * Don't check return code from debugfs_create_dir() or debugfs_create_file() - Greg K-H Changes since v3: (no functional changes) * Fix SPDX license identifiers (checkpatch) * s/uint32_t/u32/ (checkpatch) * Fix indenting in switch cases (checkpatch) Changes since v4: * Remove unneeded param changes with nv50_head_flush_clr/set * Rebase Changes since v5: * Remove set but unused variable (outp) in nv50_crc_atomic_check() - Kbuild bot Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Acked-by:
-
Lyude Paul authored
While most of the functionality on Nvidia GPUs doesn't require using an explicit handle instead of the main VRAM handle + offset, there are a couple of places that do require explicit handles, such as CRC functionality. Since this means we're about to add another nouveau-chosen handle, let's just go ahead and move any hard-coded handles into a single header. This is just to keep things slightly organized, and to make it a little bit easier if we need to add more handles in the future. This patch should contain no functional changes. Changes since v3: * Correct SPDX license identifier (checkpatch) Signed-off-by:
-
Lyude Paul authored
In order to make sure that we flush disable updates at the right time when disabling CRCs, we'll need to be able to look at the outp state to see if we're changing it at the same time that we're disabling CRCs. So, expose the struct in disp.h. Signed-off-by:
-
Lyude Paul authored
While we're not quite ready yet to add support for flexible wndw mappings, we are going to need to at least keep track of the static wndw mappings we're currently using in each head's atomic state. We'll likely use this in the future to implement real flexible window mapping, but the primary reason we'll need this is for CRC support. See: on nvidia hardware, each CRC entry in the CRC notifier dma context has a "tag". This tag corresponds to the nth update on a specific EVO/NvDisplay channel, which itself is referred to as the "controlling channel". For gf119+ this can be the core channel, ovly channel, or base channel. Since we don't expose CRC entry tags to userspace, we simply ignore this feature and always use the core channel as the controlling channel. Simple. Things get a little bit more complicated on gv100+ though. GV100+ only lets us set the controlling channel to a specific wndw channel, and that wndw must be owned by the head that we're grabbing CRCs when we enable CRC generation. Thus, we always need to make sure that each atomic head state has at least one wndw that is mapped to the head, which will be used as the controlling channel. Note that since we don't have flexible wndw mappings yet, we don't expect to run into any scenarios yet where we'd have a head with no mapped wndws. When we do add support for flexible wndw mappings however, we'll need to make sure that we handle reprogramming CRC capture if our controlling wndw is moved to another head (and potentially reject the new head state entirely if we can't find another available wndw to replace it). With that being said, nouveau currently tracks wndw visibility on heads. It does not keep track of the actual ownership mappings, which are (currently) statically programmed. To fix this, we introduce another bitmask into nv50_head_atom.wndw to keep track of ownership separately from visibility. We then introduce a nv50_head callback to handle populating the wndw ownership map, and call it during the atomic check phase when core->assign_windows is set to true. Signed-off-by:
-
Lyude Paul authored
While we expose the ability to turn off hardware dithering for nouveau, we actually make the mistake of turning it on anyway, due to dithering_depth containing a non-zero value if our dithering depth isn't also set to 6 bpc. So, fix it by never enabling dithering when it's disabled. Signed-off-by:
-
Lyude Paul authored
Currently, we modify the depth value stored in the atomic state when performing a commit in order to workaround the fact we haven't implemented support for depths higher then 10 yet. This isn't idempotent though, as it will happen every atomic commit where we modify the OR state even if the head's depth in the atomic state hasn't been modified. Normally this wouldn't matter, since we don't modify OR state outside of modesets, but since the CRC capture region is implemented as part of the OR state in hardware we'll want to make sure all commits modifying OR state are idempotent so as to avoid changing the depth unexpectedly. So, fix this by simply not writing the reduced depth value we come up with to the atomic state. Signed-off-by:
-
Lyude Paul authored
Add some kind of vblank workers. The interface is similar to regular delayed works, and is mostly based off kthread_work. It allows for scheduling delayed works that execute once a particular vblank sequence has passed. It also allows for accurate flushing of scheduled vblank works - in that flushing waits for both the vblank sequence and job execution to complete, or for the work to get cancelled - whichever comes first. Whatever hardware programming we do in the work must be fast (must at least complete during the vblank or scanout period, sometimes during the first few scanlines of the vblank). As such we use a high-priority per-CRTC thread to accomplish this. Changes since v7: * Stuff drm_vblank_internal.h and drm_vblank_work_internal.h contents into drm_internal.h * Get rid of unnecessary spinlock in drm_crtc_vblank_on() * Remove !vblank->worker check * Grab vbl_lock in drm_vblank_work_schedule() * Mention self-rearming work items in drm_vblank_work_schedule() kdocs * Return 1 from drm_vblank_work_schedule() if the work was scheduled successfully, 0 or error code otherwise * Use drm_dbg_core() instead of DRM_DEV_ERROR() in drm_vblank_work_schedule() * Remove vblank->worker checks in drm_vblank_destroy_worker() and drm_vblank_flush_worker() Changes since v6: * Get rid of ->pending and seqcounts, and implement flushing through simpler means - danvet * Get rid of work_lock, just use drm_device->event_lock * Move drm_vblank_work item cleanup into drm_crtc_vblank_off() so that we ensure that all vblank work has finished before disabling vblanks * Add checks into drm_crtc_vblank_reset() so we yell if it gets called while there's vblank workers active * Grab event_lock in both drm_crtc_vblank_on()/drm_crtc_vblank_off(), the main reason for this is so that other threads calling drm_vblank_work_schedule() are blocked from attempting to schedule while we're in the middle of enabling/disabling vblanks. * Move drm_handle_vblank_works() call below drm_handle_vblank_events() * Simplify drm_vblank_work_cancel_sync() * Fix drm_vblank_work_cancel_sync() documentation * Move wake_up_all() calls out of spinlock where we can. The only one I left was the call to wake_up_all() in drm_vblank_handle_works() as this seemed like it made more sense just living in that function (which is all technically under lock) * Move drm_vblank_work related functions into their own source files * Add drm_vblank_internal.h so we can export some functions we don't want drivers using, but that we do need to use in drm_vblank_work.c * Add a bunch of documentation Changes since v4: * Get rid of kthread interfaces we tried adding and move all of the locking into drm_vblank.c. For implementing drm_vblank_work_flush(), we now use a wait_queue and sequence counters in order to differentiate between multiple work item executions. * Get rid of drm_vblank_work_cancel() - this would have been pretty difficult to actually reimplement and it occurred to me that neither nouveau or i915 are even planning to use this function. Since there's also no async cancel function for most of the work interfaces in the kernel, it seems a bit unnecessary anyway. * Get rid of to_drm_vblank_work() since we now are also able to just pass the struct drm_vblank_work to work item callbacks anyway Changes since v3: * Use our own spinlocks, don't integrate so tightly with kthread_works Changes since v2: * Use kthread_workers instead of reinventing the wheel. Cc: Tejun Heo <tj@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Co-developed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Lyude Paul authored
This got me confused for a bit while looking over this code: I had been planning on adding some blocking function calls into this function, but seeing the irqsave/irqrestore variants of spin_(un)lock() didn't make it very clear whether or not that would actually be safe. So I went ahead and reviewed every single driver in the kernel that uses this function, and they all fall into three categories: * Driver probe code * ->atomic_disable() callbacks * Legacy modesetting callbacks All of these will be guaranteed to have IRQs enabled, which means it's perfectly safe to block here. Just to make things a little less confusing to others in the future, let's switch over to spin_lock_irq()/spin_unlock_irq() to make that fact a little more obvious. Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
-
Lyude Paul authored
Since we'll be allocating resources for kthread_create_worker() in the next commit (which could fail and require us to clean up the mess), let's simplify the cleanup process a bit by registering a drm_vblank_init_release() action for each drm_vblank_crtc so they're still cleaned up if we fail to initialize one of them. Changes since v3: * Use drmm_add_action_or_reset() - Daniel Vetter Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Reviewed-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Sebastian Reichel authored
Convert panel-dsi-cm bindings to YAML and add missing properties while at it. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Paul Cercueil authored
By changing the pixel clock and the length of the back porch, it is possible to obtain a perfect 50 Hz refresh rate. v2: Rebase on drm-misc-next Signed-off-by:
-
Paul Cercueil authored
The FRD350H54004 panel was marked as having active-high VSYNC and HSYNC signals, which sorts-of worked, but resulted in the picture fading out under certain circumstances. Fix this issue by marking VSYNC and HSYNC signals active-low. v2: Rebase on drm-misc-next Fixes: 7b6bd843 ("drm/panel: simple: Add support for the Frida FRD350H54004 panel") Cc: stable@vger.kernel.org # v5.5 Signed-off-by:
-
- 15 Jul, 2020 7 commits
-
-
Randy Dunlap authored
Drop doubled word "the" in a comment. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "to" in comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled words "the" and "be" in comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "is" in several comments. Signed-off-by:
-
Randy Dunlap authored
Drop the doubled words "the" and "by" in comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "should" in a comment. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "than" in a comment. Signed-off-by:
-
- 14 Jul, 2020 5 commits
-
-
Daniel Vetter authored
Exactly matches the one in the helpers. This avoids me having to roll out dma-fence critical section annotations to this copy. Reviewed-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Link: https://patchwork.freedesktop.org/patch/msgid/20200709123339.547390-2-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Gives us proper nonblocking support for free, and a pile of other things. The tilcdc code is simply old enough that it was never converted over, but was stuck forever with the copypasta from when it was initially merged. The riskiest thing with this conversion is maybe that there's an issue with the vblank handling or vblank event handling, which will upset the modern commit support in atomic helpers. But from a cursory review drm_crtc_vblank_on/off is called in the right places, and the event handling also seems to exist (albeit with much hand-rolling and probably some races, could perhaps be converted over to drm_crtc_arm_vblank_event without any real loss). Motivated by me not having to hand-roll the dma-fence annotations for this. v2: Clear out crtc_state->event when we're handling the event, to avoid upsetting the helpers (reported by Jyri). v3: Also send out even whent the crtc is getting disabled. Tilcdc looks a bit like conversion to simple display helpers would work out really nice. Tested-by:
-
Thomas Zimmermann authored
There's only trivial code left in mga_crtc_{prepare,commit}(). Merge the functions into the simple pipe's enable function. Signed-off-by:Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Thomas Zimmermann authored
The prepare and commit helpers for G200WB devices control the BMC. Rename them accordingly. While at it, also change the passed value's type to struct mga_device and remove some type upcasting. Signed-off-by:
-
Thomas Zimmermann authored
Modifying the <syncrst> field in mgag200_{enable,disable}_display() makes the code more readable. Also clear the <asyncrst> field to enable the display. The other bits in SEQ0 are unused, so no functional changes are made. Signed-off-by:
-
