- 19 Jul, 2016 9 commits
-
-
Kevin Hao authored
It makes no sense to keep two separate RELOCATABLE config entries for ppc32 and ppc64 respectively. Merge them into one and move it to a common place. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Kevin Hao authored
In the current code, the RELOCATABLE will be forcedly enabled when enabling CRASH_DUMP. But for ppc32, the RELOCABLE also depend on ADVANCED_OPTIONS and select NONSTATIC_KERNEL. This will cause the following build error when CRASH_DUMP=y && ADVANCED_OPTIONS=n because the select of NONSTATIC_KERNEL doesn't take effect. arch/powerpc/include/asm/io.h: In function 'virt_to_phys': arch/powerpc/include/asm/page.h:113:26: error: 'virt_phys_offset' undeclared (first use in this function) #define VIRT_PHYS_OFFSET virt_phys_offset ^ It doesn't have any strong reasons to make the RELOCATABLE depend on ADVANCED_OPTIONS. So remove this dependency to fix this issue. Signed-off-by: -
John Allen authored
The sysfs interface used to handle PowerVM hotplug events should use the hotplug queue as well. PRRN events will soon be placing many hotplug events on the queue at once and we will need ordinary hotplug events to use the queue as well in order to ensure these events will still be handled and that proper serialization is maintained during the PRRN event. Signed-off-by:
John Allen <jallen@linux.vnet.ibm.com> Reviewed-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
-
John Allen authored
Add handler for new hotplug interrupt. For memory and CPU hotplug events, we will add the hotplug errorlog to the hotplug workqueue. Since PCI hotplug is not currently supported in the kernel, PCI hotplug events are written to the rtas_log_bug and are handled by rtas_errd. Signed-off-by:
-
John Allen authored
In support of PAPR changes to add a new hotplug interrupt, introduce a hotplug workqueue to avoid processing hotplug events in interrupt context. We will also take advantage of the queue on PowerVM to ensure hotplug events initiated from different sources (HMC and PRRN events) are handled and serialized properly. Signed-off-by:
-
Andrew Donnellan authored
If kzalloc() fails when allocating adapter->guest in cxl_guest_init_adapter(), we call free_adapter() before erroring out. free_adapter() in turn attempts to dereference adapter->guest, which in this case is NULL. In free_adapter(), skip the adapter->guest cleanup if adapter->guest is NULL. Fixes: 14baf4d9 ("cxl: Add guest-specific code") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Andrew Donnellan authored
Remove the CXL_KERNEL_API and CXL_EEH Kconfig options, as they were only needed to coordinate the merging of the cxlflash driver. Also remove the stub implementation of cxl_perst_reloads_same_image() in cxlflash which is only used if CXL_EEH isn't defined (i.e. never). Suggested-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
-
Ian Munsie authored
pnv_cxl_enable_phb_kernel_api() grabs a reference to the cxl module to prevent it from being unloaded after the PHB has been switched to CX4 mode. This breaks the build when CONFIG_MODULES=n as module_mutex doesn't exist. However, if we don't have modules, we don't need to protect against the case of the cxl module being unloaded. As such, split the relevant code out into a function surrounded with #if IS_MODULE(CXL) so we don't try to compile it if cxl isn't being compiled as a module. Fixes: 5918dbc9b4ec ("powerpc/powernv: Add support for the cxl kernel api on the real phb") Reported-by: -
Aneesh Kumar K.V authored
This makes it easy to verify we are not overloading the bits. No functionality change by this patch. mpe: Cleanup more. Completely fixup whitespace, convert all UL values to ASM_CONST(), and replace all occurrences of 63-x with the actual shift. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
- 17 Jul, 2016 25 commits
-
-
Aneesh Kumar K.V authored
This patch adds the kernel command line disable_radix which disable the radix MMU mode even if firmware indicates radix support via ibm,pa-features device tree node. This helps in testing different MMU mode easily. Signed-off-by:
-
Aneesh Kumar K.V authored
We add a tlb flush variant, to flush LPID mappings. Signed-off-by:
-
Aneesh Kumar K.V authored
This update the machine dep callback such that we can use the same callback to register process table. The interface is updated such that we can easily call H_REGISTER_PROC_TBL hcall. The HCALL itself is introduced in a later patch. No functionality change introduced by this patch. Signed-off-by:
-
Aneesh Kumar K.V authored
Update the PID switch as per ISA doc. slbia is needed in radix to invalidate any implementation specific lookaside information. We use the .long format due to build errors with the below compiler version. gcc (Ubuntu 5.3.1-14ubuntu2.1) 5.3.1 20160413 GNU assembler (GNU Binutils for Ubuntu) 2.26 CC arch/powerpc/mm//mmu_context_book3s64.o {standard input}: Assembler messages: {standard input}:506: Error: junk at end of line: `0x7' scripts/Makefile.build:291: recipe for target 'arch/powerpc/mm//mmu_context_book3s64.o' failed make[1]: *** [arch/powerpc/mm//mmu_context_book3s64.o] Error 1 Signed-off-by: -
Aneesh Kumar K.V authored
ISA 3.0 document hash table size in bytes = 2^(HTABSIZE + 18) No functionality change by this patch. Signed-off-by:
-
Aneesh Kumar K.V authored
This helps in easily identifying the MMU mode with which the kernel is operating. Signed-off-by:
-
Aneesh Kumar K.V authored
As per ISA, we need to do this only for architecture version 2.02 and earlier. This continued to work even for 2.07. But let's not do this for anything after 2.02. ISA 3.0 requires these top bits to be not cleared. Signed-off-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Aneesh Kumar K.V authored
Currently we depend on mmu_has_feature to evalute to zero based on MMU_FTRS_POSSIBLE mask. In a later patch, we want to update radix_enabled() to runtime update the conditional operation to a jump instruction. This implies we cannot depend on MMU_FTRS_POSSIBLE mask. Instead define radix_enabled to return 0 if RADIX_MMU is not enabled. Signed-off-by:
-
Aneesh Kumar K.V authored
This switch few of the page table accessor to use the __raw variant and does the cpu to big endian conversion of constants. This helps in generating better code. For ex: a pgd_none(pgd) check with and without fix is listed below Without fix: ------------ 2240: 20 00 61 eb ld r27,32(r1) /* PGD level */ typedef struct { __be64 pgd; } pgd_t; static inline unsigned long pgd_val(pgd_t x) { return be64_to_cpu(x.pgd); 2244: 22 00 66 78 rldicl r6,r3,32,32 2248: 3e 40 7d 54 rotlwi r29,r3,8 224c: 0e c0 7d 50 rlwimi r29,r3,24,0,7 2250: 3e 40 c5 54 rotlwi r5,r6,8 2254: 2e c4 7d 50 rlwimi r29,r3,24,16,23 2258: 0e c0 c5 50 rlwimi r5,r6,24,0,7 225c: 2e c4 c5 50 rlwimi r5,r6,24,16,23 2260: c6 07 bd 7b rldicr r29,r29,32,31 2264: 78 2b bd 7f or r29,r29,r5 if (pgd_none(pgd)) 2268: 00 00 bd 2f cmpdi cr7,r29,0 226c: 54 03 9e 41 beq cr7,25c0 <__get_user_pages_fast+0x500> With fix: --------- 2370: 20 00 61 eb ld r27,32(r1) if (pgd_none(pgd)) 2374: 00 00 bd 2f cmpdi cr7,r29,0 2378: a8 03 9e 41 beq cr7,2720 <__get_user_pages_fast+0x530> break; Signed-off-by: -
Aneesh Kumar K.V authored
PowerISA 3.0 requires the MMU mode (radix vs. hash) of the hypervisor to be mirrored in the LPCR register, in addition to the partition table. This is done to avoid fetching from the table when deciding, among other things, how to perform transitions to HV mode on some interrupts. So let's set it up appropriately Signed-off-by:
-
Balbir Singh authored
The .longs with the shifts are harder to read, use more meaningful names for the opcodes. PPC_TLBIE_5 is introduced for the 5 opcode variation of the instruction due to an existing op-code for the 2 opcode variant. Signed-off-by:
-
Benjamin Herrenschmidt authored
When we know we will reassign all resources, trying (and failing) to allocate them initially is fairly pointless and leads to a lot of scary messages in the kernel log Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
If the firmware encounters an error (internal or HW) during initialization of a PHB, it might leave the device-node in the tree but mark it disabled using the "status" property. We should check it. Signed-off-by:
-
Benjamin Herrenschmidt authored
M64's are the configurable 64-bit windows that cover the 64-bit MMIO space. We used to hard code 16 windows. Newer chips might have a variable number and might need to reserve some as well (for example on PHB4/POWER9, M32 and M64 are actually unified and we use M64#0 to map the 32-bit space). So newer OPALs will provide a property we can use to know what range of windows is available. The property is named so that it can eventually support multiple ranges but we only use the first one for now. Signed-off-by:
-
Benjamin Herrenschmidt authored
If we don't find registers for the PHB or don't know the model specific invalidation method, use OPAL calls instead. Signed-off-by:
-
Benjamin Herrenschmidt authored
It's architected, always in a known place, so there is no need to keep a separate pointer to it, we use the existing "regs", and we complement it with a real mode variant. Signed-off-by:
-
Benjamin Herrenschmidt authored
We have some obsolete code in pnv_pci_p7ioc_tce_invalidate() to handle some internal lab tools that have stopped being useful a long time ago. Remove that along with the definition and test for the TCE_PCI_SWINV_* flags whose value is basically always the same. Signed-off-by:
-
Benjamin Herrenschmidt authored
The TCE invalidation functions are fairly implementation specific, and while the IODA specs more/less describe the register, in practice various implementation workarounds may be required. So name the functions after the target PHB. Note today and for the foreseeable future, there's a 1:1 relationship between an IODA version and a PHB implementation. There exist another variant of IODA1 (Torrent) but we never supported in with OPAL and never will. Signed-off-by:
-
Benjamin Herrenschmidt authored
Replace the old generic opal_call_realmode() with proper per-call wrappers similar to the normal ones and convert callers. Signed-off-by:
-
Benjamin Herrenschmidt authored
That was used by some old IBM internal bringup tools and is no longer relevant. Signed-off-by:
-
Benjamin Herrenschmidt authored
We instanciate them as IODA2. We also change the MSI EOI hack to only kick on PHB3 since it will not be needed on any new implementation. Signed-off-by:
-
Benjamin Herrenschmidt authored
This adds a new XICS backend that uses OPAL calls, which can be used when we don't have native support for the platform interrupt controller. Signed-off-by:
-
Benjamin Herrenschmidt authored
Calling this function with interrupts soft-disabled will cause a replay of the external interrupt vector when they are re-enabled. This will be used by the OPAL XICS backend (and latter by the native XIVE code) to handle EOI signaling that there are more interrupts to fetch from the hardware since the hardware won't issue another HW interrupt in that case. Signed-off-by:
-
Benjamin Herrenschmidt authored
This will be delivering external interrupts from the XIVE to the Hypervisor. We treat it as a normal external interrupt for the lazy irq disable code (so it will be replayed as a 0x500) and route it to do_IRQ. Signed-off-by:
-
Benjamin Herrenschmidt authored
This moves the CBE RAS and facility unavailable "common" handlers down to after the FWNMI page. This frees up some space in the very demanded spaces before the relocation-on vectors and before the FWNMI page. They are still within 64K of __start, so CONFIG_RELOCATABLE should still work. Signed-off-by:
-
- 15 Jul, 2016 6 commits
-
-
Benjamin Herrenschmidt authored
OPAL provides an emulated XICS interrupt controller to use as a fallback on newer processors that don't have a XICS. It's meant as a way to provide backward compatibility with future processors. Add the corresponding interfaces. Signed-off-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by:
-
Shreyas B. Prabhu authored
If hardware supports stop state, use the deepest stop state when the cpu is offlined. Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Signed-off-by:
-
Shreyas B. Prabhu authored
POWER ISA v3 defines a new idle processor core mechanism. In summary, a) new instruction named stop is added. b) new per thread SPR named PSSCR is added which controls the behavior of stop instruction. Supported idle states and value to be written to PSSCR register to enter any idle state is exposed via ibm,cpu-idle-state-names and ibm,cpu-idle-state-psscr respectively. To enter an idle state, platform provided power_stop() needs to be invoked with the appropriate PSSCR value. This patch adds support for this new mechanism in cpuidle powernv driver. Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com> Cc: linux-pm@vger.kernel.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: linuxppc-dev@lists.ozlabs.org Reviewed-by:
-
Shreyas B. Prabhu authored
- Use stack instead of kzalloc'ed memory for variables while probing device tree for idle states. - Set cap for number of idle states that can be added to cpuidle_state_table - Minor change in way we check of_property_read_u32_array for error for sake of consistency - Drop unnecessary "&" while assigning function pointer Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-pm@vger.kernel.org Signed-off-by:
-
Shreyas B. Prabhu authored
Use cpuidle's CPUIDLE_STATE_MAX macro instead of powernv specific MAX_POWERNV_IDLE_STATES. Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-pm@vger.kernel.org Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Shreyas B. Prabhu authored
POWER ISA v3 defines a new idle processor core mechanism. In summary, a) new instruction named stop is added. This instruction replaces instructions like nap, sleep, rvwinkle. b) new per thread SPR named Processor Stop Status and Control Register (PSSCR) is added which controls the behavior of stop instruction. PSSCR layout: ---------------------------------------------------------- | PLS | /// | SD | ESL | EC | PSLL | /// | TR | MTL | RL | ---------------------------------------------------------- 0 4 41 42 43 44 48 54 56 60 PSSCR key fields: Bits 0:3 - Power-Saving Level Status. This field indicates the lowest power-saving state the thread entered since stop instruction was last executed. Bit 42 - Enable State Loss 0 - No state is lost irrespective of other fields 1 - Allows state loss Bits 44:47 - Power-Saving Level Limit This limits the power-saving level that can be entered into. Bits 60:63 - Requested Level Used to specify which power-saving level must be entered on executing stop instruction This patch adds support for stop instruction and PSSCR handling. Reviewed-by:
-
