Add StarFive JH7110(TX0/TX1/RX channels) SoC support in the
designware I2S driver and a flag to check if it is on the JH7110 SoC.

These channels need to enable clocks, resets and syscon register on the
JH7110 SoC. So add init ops in platform data for the JH7110 SoC to do this.

Their resets should be deassert before changing the parent of clocks so
these are done in the init ops of platform data.

The I2S controllers use DMA controller by platform data on the JH7110
and their settings about snd_dmaengine_dai_dma_data() should be added
in the dw_configure_dai_by_pd(). And use dmaengine PCM registration if
these do not have IRQ on the JH7110 SoC.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Link: https://lore.kernel.org/r/20230821144151.207339-4-xingyu.wu@starfivetech.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use of_device_get_match_data() to get platform data.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Link: https://lore.kernel.org/r/20230821144151.207339-3-xingyu.wu@starfivetech.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the StarFive JH7110 (TX0/TX1/RX channel) SoC support in the bindings
of Designware I2S controller. The I2S controller needs two reset items
to work properly on the JH7110 SoC. And TX0 channel as master mode needs
5 clock items and TX1/RX channels as slave mode need 9 clock items on
the JH7110 SoC. The RX channel needs System Register Controller property
to enable it and other platforms do not need it.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230821144151.207339-2-xingyu.wu@starfivetech.comSigned-off-by: Mark Brown <broonie@kernel.org>

ALSA SoC merges DAI call backs into .ops.
This patch merge these into one.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308152047.psX1QNDh-lkp@intel.com/
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 446b31e8 ("ASoC: soc-dai.h: remove unused call back functions")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/87a5ujubj0.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a new module parameter ipc4_ignore_cpc which can be used to force the
kernel to ignore the queried CPC value for all firmware modules and use 0
instead.

The CPC lookup is still done to report missing configurations and the
debug print is going to be different to be explicit that the CPC is ignored
and what was the value we would have used.

The CPC value is sent to the firmware with the MOD_INIT_INSTANCE message
and it is used by the firmware as a parameter for clock scaling.

The flag is intended to be used only when there is a need to validate the
firmware behavior regarding to clock scaling since the 0 CPC value will
force the DSP to run in full speed, disabling the scaling and provides
additional counter point to rule out clock management related issues.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822065419.24374-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

ALSA SoC merges DAI call backs into .ops.
This patch merge these into one.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308151142.hoM5o9LV-lkp@intel.com/
Fixes: 446b31e8 ("ASoC: soc-dai.h: remove unused call back functions")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878ra3ubid.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

The SRC component in a pipeline provides flexibility on the sampling
rate which was not handled previously.  This series will improve the
kernel side with the needed logic to be able to deal with the SRC type
of components in pipelines.

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

This patch chain adds support for the Cirrus Logic cs42l43 PC focused
SoundWire CODEC. The chain is currently based of Lee's for-mfd-next
branch.

This series is mostly just a resend keeping pace with the kernel under
it, except for a minor fixup in the ASoC stuff.

Thanks,
Charles

Charles Keepax (4):
  dt-bindings: mfd: cirrus,cs42l43: Add initial DT binding
  mfd: cs42l43: Add support for cs42l43 core driver
  pinctrl: cs42l43: Add support for the cs42l43
  ASoC: cs42l43: Add support for the cs42l43

Lucas Tanure (2):
  soundwire: bus: Allow SoundWire peripherals to register IRQ handlers
  spi: cs42l43: Add SPI controller support

 .../bindings/sound/cirrus,cs42l43.yaml        |  313 +++
 MAINTAINERS                                   |    4 +
 drivers/mfd/Kconfig                           |   23 +
 drivers/mfd/Makefile                          |    3 +
 drivers/mfd/cs42l43-i2c.c                     |   98 +
 drivers/mfd/cs42l43-sdw.c                     |  239 ++
 drivers/mfd/cs42l43.c                         | 1188 +++++++++
 drivers/mfd/cs42l43.h                         |   28 +
 drivers/pinctrl/cirrus/Kconfig                |   11 +
 drivers/pinctrl/cirrus/Makefile               |    2 +
 drivers/pinctrl/cirrus/pinctrl-cs42l43.c      |  609 +++++
 drivers/soundwire/bus.c                       |   32 +
 drivers/soundwire/bus_type.c                  |   12 +
 drivers/spi/Kconfig                           |    7 +
 drivers/spi/Makefile                          |    1 +
 drivers/spi/spi-cs42l43.c                     |  284 ++
 include/linux/mfd/cs42l43-regs.h              | 1184 +++++++++
 include/linux/mfd/cs42l43.h                   |  102 +
 include/linux/soundwire/sdw.h                 |    9 +
 include/sound/cs42l43.h                       |   17 +
 sound/soc/codecs/Kconfig                      |   16 +
 sound/soc/codecs/Makefile                     |    4 +
 sound/soc/codecs/cs42l43-jack.c               |  946 +++++++
 sound/soc/codecs/cs42l43-sdw.c                |   74 +
 sound/soc/codecs/cs42l43.c                    | 2278 +++++++++++++++++
 sound/soc/codecs/cs42l43.h                    |  131 +
 26 files changed, 7615 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml
 create mode 100644 drivers/mfd/cs42l43-i2c.c
 create mode 100644 drivers/mfd/cs42l43-sdw.c
 create mode 100644 drivers/mfd/cs42l43.c
 create mode 100644 drivers/mfd/cs42l43.h
 create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs42l43.c
 create mode 100644 drivers/spi/spi-cs42l43.c
 create mode 100644 include/linux/mfd/cs42l43-regs.h
 create mode 100644 include/linux/mfd/cs42l43.h
 create mode 100644 include/sound/cs42l43.h
 create mode 100644 sound/soc/codecs/cs42l43-jack.c
 create mode 100644 sound/soc/codecs/cs42l43-sdw.c
 create mode 100644 sound/soc/codecs/cs42l43.c
 create mode 100644 sound/soc/codecs/cs42l43.h

--
2.30.2

I noticed typos and i fixed them.
Signed-off-by: Senhong Liu <liusenhong2022@email.szu.edu.cn>
Link: https://lore.kernel.org/r/20230819133345.39961-1-liusenhong2022@email.szu.edu.cnSigned-off-by: Mark Brown <broonie@kernel.org>

Enable signed firmware loading for Vangogh platform using dmi quirks.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230809123534.287707-3-venkataprasad.potturu@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for signed firmware code bin and data bin
loading for amd platforms.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230809123534.287707-2-venkataprasad.potturu@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add pci driver and platform driver to enable SOF support
on ACP5x architecture based Vangogh platform.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230809123534.287707-1-venkataprasad.potturu@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

If the copier has only output valid_bits across all its output
formats, the reference for selecting the output format must be set that
instead of the valid_bits from the selected input format.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230821113629.5017-5-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When we walk the list of connected widgets from the source to the sink
to prepare all widgets, the pipeline_params must be modified to reflect
the output audio format at each widget. But, the copier only modifies
the sample format in the pipeline_params. So, fix it to also modify the
rate and channels.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230821113629.5017-4-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

For playback, the SRC sink rate must be configured based on the requested
output format which is restricted to only handle DAI's that support a
single audio format for now. For capture, the SRC module should convert
the rate to match the rate requested by the PCM hw_params.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230821113629.5017-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Modify the pipeline_params based on the SRC output format and set the
sink_rate in the IPC data.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230821113629.5017-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.

The ASoC component provides the majority of the functionality of the
device, all the audio functions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-7-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'ib-mfd-pinctrl-soundwire-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into tmp

Immutable branch between MFD, Pinctrl and soundwire due for the v6.6 merge window

Commit 7ac3404c ("ASoC: amd: acp: Map missing jack kcontrols") adds
card kcontrols and DAPM widgets corresponding to jacks for Headphone and
Headset Mic. But these were already being added in acp-legacy-mach.c and
acp-sof-mach.c, so this causes a probe error:

  sof_mach rt5682s-hs-rt1019: control 2:0:0:Headphone Jack Switch:0 is already present
  sof_mach rt5682s-hs-rt1019: ASoC: Failed to add Headphone Jack Switch: -16
  sof_mach rt5682s-hs-rt1019: devm_snd_soc_register_card(sof-rt5682s-hs-rt1019) failed: -16
  sof_mach: probe of rt5682s-hs-rt1019 failed with error -16

Removing the new duplicates from the common code might be enough to fix
the issue. But some of the codecs use different kcontrols and widgets.
NAU8821 alone has an "Int Mic". MAX98360A has a single "Spk", while
RT1019 has "Left Spk" and "Right Spk" (and two codec instances with name
prefixes).

Since there are per-codec differences, add the kcontrols and widgets
in the common code as each dai-link is being initialized, instead of in
the two machine drivers' probe().

Also, MAX98388 has Left and Right instances, but uses a single "SPK"
widget. That seems weird, so normalize it to use two widgets (one per
each instance like RT1019) while we're adding controls.

Fixes: 7ac3404c ("ASoC: amd: acp: Map missing jack kcontrols")
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230818080314.32991-1-alpernebiyasak@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch will improve the depop function of CBJ detection before the headphone playback
when the system resumes.
We also want to complete the CBJ detection in the system-level resume function.
It could avoid triggering the detection at the playing state of headphones.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230818023732.2153170-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

For the benefit of CI.

Merge series from Linus Walleij <linus.walleij@linaro.org>:

After dropping unused headers a few Realtek devices
actually using the GPIO descriptors remain.

Converting them to use optional GPIO descriptors is
pretty straight-forward.

Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:

These two patches add an ACPI HID and update the way the platform-
specific firmware identifier is extracted from the ACPI.

Convert the RT5682S to use GPIO descriptors and drop the
legacy GPIO headers.

We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-5-02fa2ca3e5b0@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the RT5682 to use GPIO descriptors and drop the
legacy GPIO headers.

We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.

Make sure to make sure SDW devices can associate with
an LDO1 EN descriptor too, if they so desire by putting
the lookup into the common code.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-4-02fa2ca3e5b0@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the RT5668 to use GPIO descriptors and drop the
legacy GPIO headers.

We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-3-02fa2ca3e5b0@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The RT5665 driver has some stub support for GPIO descriptors
going back to the initial driver commit, where there are
two GPIO descriptors for the LDO and headphone detection
defined in the device state. Well, let's make use of the
descriptor properly.

We remove the global GPIO number from the platform data,
but it is still possible to create board files using GPIO
descriptor tables, if desired.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-2-02fa2ca3e5b0@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The RT5640 driver is already using GPIO descriptors for some
stuff, all that is needed is to convert the remaining LDO1
control line to also use descriptors.

Simplify the code using gpiod_get_optional() and drop the
special "of" parsing function: these descriptors need not
come from device tree and it's optional so hey.

Keep some NULL checks around the GPIO operations even though
gpiolib is essentially NULL-tolerant, because by checking
for whether we have a valid GPIO descriptor or not we can
avoid a 400 ms delay which is great.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230817-descriptors-asoc-rt-v2-1-02fa2ca3e5b0@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add mt7986 audio afe document.
Signed-off-by: Maso Huang <maso.huang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230817101338.18782-7-maso.huang@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add document for mt7986 board with wm8960.
Signed-off-by: Maso Huang <maso.huang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230817101338.18782-6-maso.huang@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for mt7986 board with wm8960.
Signed-off-by: Maso Huang <maso.huang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230817101338.18782-5-maso.huang@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add mt7986 platform driver.
Signed-off-by: Maso Huang <maso.huang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230817101338.18782-4-maso.huang@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add mt7986 etdm dai driver support.
Signed-off-by: Maso Huang <maso.huang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230817101338.18782-3-maso.huang@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add header files for register definition and structure.
Signed-off-by: Maso Huang <maso.huang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230817101338.18782-2-maso.huang@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

fixed register access error when switching to other tas2781 -- refresh the page
inside regmap on the switched tas2781
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20230817093257.951-1-shenghao-ding@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

An ACPI ID has been allocated for CS35L56 ASoC devices so that they can
be instantiated from ACPI Device entries.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230817112712.16637-3-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use a device property "cirrus,firmware-uid" to get the unique firmware
identifier instead of using ACPI _SUB. There aren't any products that use
_SUB.

There will not usually be a _SUB in Soundwire nodes. The ACPI can use a
_DSD section for custom properties.

There is also a need to support instantiating this driver using software
nodes. This is for systems where the CS35L56 is a back-end device and the
ACPI refers only to the front-end audio device - there will not be any ACPI
references to CS35L56.

Fixes: e4961125 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230817112712.16637-2-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.

Add a basic pinctrl driver which supports driver strength for the
various pins, gpios, and pinmux for the 2 multi-function pins.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-5-ckeepax@opensource.cirrus.comSigned-off-by: Lee Jones <lee@kernel.org>

The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.

The MFD component registers and initialises the device and provides
PM/system power management.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-4-ckeepax@opensource.cirrus.comSigned-off-by: Lee Jones <lee@kernel.org>

The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.

Add a YAML DT binding document for this device.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-3-ckeepax@opensource.cirrus.comSigned-off-by: Lee Jones <lee@kernel.org>