- 13 Jan, 2019 40 commits
-
-
Jiri Slaby authored
commit 75539616 upstream. Commit 7ed1c190 (tools: fix cross-compile var clobbering) removed setting of LD to $(CROSS_COMPILE)gcc. This broke build of acpica (acpidump) in power/acpi: ld: unrecognized option '-D_LINUX' The tools pass CFLAGS to the linker (incl. -D_LINUX), so revert this particular change and let LD be $(CC) again. Note that the old behaviour was a bit different, it used $(CROSS_COMPILE)gcc which was eliminated by the commit 7ed1c190. We use $(CC) for that reason. Fixes: 7ed1c190 (tools: fix cross-compile var clobbering) Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Martin Kelly <martin@martingkelly.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ivan Mironov authored
commit 38355a5f upstream. This happened when I tried to boot normal Fedora 29 system with latest available kernel (from fedora rawhide, plus some unrelated custom patches): BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 6 PID: 1422 Comm: libvirtd Tainted: G I 4.20.0-0.rc7.git3.hpsa2.1.fc29.x86_64 #1 Hardware name: HP ProLiant BL460c G6, BIOS I24 05/21/2018 RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffffa47ccdc9fbe0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000003e8 RCX: ffffa47ccdc9fbf8 RDX: ffffa47ccdc9fc00 RSI: ffff97d9ee7b01f8 RDI: ffff97d9f0150b80 RBP: ffff97d9f0150b80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff97d9ef1e53e8 R14: 0000000000000009 R15: ffff97d9f0ac6730 FS: 00007f4d224ef700(0000) GS:ffff97d9fa200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000011ece52006 CR4: 00000000000206e0 Call Trace: ? bnx2x_chip_cleanup+0x195/0x610 [bnx2x] ? bnx2x_nic_unload+0x1e2/0x8f0 [bnx2x] ? bnx2x_reload_if_running+0x24/0x40 [bnx2x] ? bnx2x_set_features+0x79/0xa0 [bnx2x] ? __netdev_update_features+0x244/0x9e0 ? netlink_broadcast_filtered+0x136/0x4b0 ? netdev_update_features+0x22/0x60 ? dev_disable_lro+0x1c/0xe0 ? devinet_sysctl_forward+0x1c6/0x211 ? proc_sys_call_handler+0xab/0x100 ? __vfs_write+0x36/0x1a0 ? rcu_read_lock_sched_held+0x79/0x80 ? rcu_sync_lockdep_assert+0x2e/0x60 ? __sb_start_write+0x14c/0x1b0 ? vfs_write+0x159/0x1c0 ? vfs_write+0xba/0x1c0 ? ksys_write+0x52/0xc0 ? do_syscall_64+0x60/0x1f0 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe After some investigation I figured out that recently added cleanup code tries to call VLAN filtering de-initialization function which exist only for newer hardware. Corresponding function pointer is not set (== 0) for older hardware, namely these chips: #define CHIP_NUM_57710 0x164e #define CHIP_NUM_57711 0x164f #define CHIP_NUM_57711E 0x1650 And I have one of those in my test system: Broadcom Inc. and subsidiaries NetXtreme II BCM57711E 10-Gigabit PCIe [14e4:1650] Function bnx2x_init_vlan_mac_fp_objs() from drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h decides whether to initialize relevant pointers in bnx2x_sp_objs.vlan_obj or not. This regression was introduced after v4.20-rc7, and still exists in v4.20 release. Fixes: 04f05230 ("bnx2x: Remove configured vlans as part of unload sequence.") Signed-off-by:
Ivan Mironov <mironov.ivan@gmail.com> Signed-off-by:
Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Boris Brezillon authored
commit 2b02a05b upstream. When vc4_plane_state is duplicated ->is_yuv is left assigned to its previous value, and we never set it back to false when switching to a non-YUV format. Fix that by setting ->is_yuv to false in the 'num_planes == 1' branch of the vc4_plane_setup_clipping_and_scaling() function. Fixes: fc04023f ("drm/vc4: Add support for YUV planes.") Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181009132446.21960-1-boris.brezillon@bootlin.comSigned-off-by:
-
Christophe Leroy authored
commit 10fdf838 upstream. On several arches, virt_to_phys() is in io.h Build fails without it: CC lib/test_debug_virtual.o lib/test_debug_virtual.c: In function 'test_debug_virtual_init': lib/test_debug_virtual.c:26:7: error: implicit declaration of function 'virt_to_phys' [-Werror=implicit-function-declaration] pa = virt_to_phys(va); ^ Fixes: e4dace36 ("lib: add test module for CONFIG_DEBUG_VIRTUAL") CC: stable@vger.kernel.org Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Lubomir Rintel authored
commit ed54ffbe upstream. According to [1] and [2], the temperature values are in tenths of degree Celsius. Exposing the Celsius value makes the battery appear on fire: $ upower -i /org/freedesktop/UPower/devices/battery_olpc_battery ... temperature: 236.9 degrees C Tested on OLPC XO-1 and OLPC XO-1.75 laptops. [1] include/linux/power_supply.h [2] Documentation/power/power_supply_class.txt Fixes: fb972873 ("[BATTERY] One Laptop Per Child power/battery driver") Cc: stable@vger.kernel.org Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Alexander Shishkin authored
commit ec5b5ad6 upstream. The 'nr_pages' attribute of the 'msc' subdevices parses a comma-separated list of window sizes, passed from userspace. However, there is a bug in the string parsing logic wherein it doesn't exclude the comma character from the range of characters as it consumes them. This leads to an out-of-bounds access given a sufficiently long list. For example: > # echo 8,8,8,8 > /sys/bus/intel_th/devices/0-msc0/nr_pages > ================================================================== > BUG: KASAN: slab-out-of-bounds in memchr+0x1e/0x40 > Read of size 1 at addr ffff8803ffcebcd1 by task sh/825 > > CPU: 3 PID: 825 Comm: npktest.sh Tainted: G W 4.20.0-rc1+ > Call Trace: > dump_stack+0x7c/0xc0 > print_address_description+0x6c/0x23c > ? memchr+0x1e/0x40 > kasan_report.cold.5+0x241/0x308 > memchr+0x1e/0x40 > nr_pages_store+0x203/0xd00 [intel_th_msu] Fix this by accounting for the comma character. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: ba82664c ("intel_th: Add Memory Storage Unit driver") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
-
Christian Borntraeger authored
commit fdd66968 upstream. Calling the test program genwqe_cksum with the default buffer size of 2MB triggers the following kernel warning on s390: WARNING: CPU: 30 PID: 9311 at mm/page_alloc.c:3189 __alloc_pages_nodemask+0x45c/0xbe0 CPU: 30 PID: 9311 Comm: genwqe_cksum Kdump: loaded Not tainted 3.10.0-957.el7.s390x #1 task: 00000005e5d13980 ti: 00000005e7c6c000 task.ti: 00000005e7c6c000 Krnl PSW : 0704c00180000000 00000000002780ac (__alloc_pages_nodemask+0x45c/0xbe0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 Krnl GPRS: 00000000002932b8 0000000000b73d7c 0000000000000010 0000000000000009 0000000000000041 00000005e7c6f9b8 0000000000000001 00000000000080d0 0000000000000000 0000000000b70500 0000000000000001 0000000000000000 0000000000b70528 00000000007682c0 0000000000277df2 00000005e7c6f9a0 Krnl Code: 000000000027809e: de7195001000 ed 1280(114,%r9),0(%r1) 00000000002780a4: a774fead brc 7,277dfe #00000000002780a8: a7f40001 brc 15,2780aa >00000000002780ac: 92011000 mvi 0(%r1),1 00000000002780b0: a7f4fea7 brc 15,277dfe 00000000002780b4: 9101c6b6 tm 1718(%r12),1 00000000002780b8: a784ff3a brc 8,277f2c 00000000002780bc: a7f4fe2e brc 15,277d18 Call Trace: ([<0000000000277df2>] __alloc_pages_nodemask+0x1a2/0xbe0) [<000000000013afae>] s390_dma_alloc+0xfe/0x310 [<000003ff8065f362>] __genwqe_alloc_consistent+0xfa/0x148 [genwqe_card] [<000003ff80658f7a>] genwqe_mmap+0xca/0x248 [genwqe_card] [<00000000002b2712>] mmap_region+0x4e2/0x778 [<00000000002b2c54>] do_mmap+0x2ac/0x3e0 [<0000000000292d7e>] vm_mmap_pgoff+0xd6/0x118 [<00000000002b081c>] SyS_mmap_pgoff+0xdc/0x268 [<00000000002b0a34>] SyS_old_mmap+0x8c/0xb0 [<000000000074e518>] sysc_tracego+0x14/0x1e [<000003ffacf87dc6>] 0x3ffacf87dc6 turns out the check in __genwqe_alloc_consistent uses "> MAX_ORDER" while the mm code uses ">= MAX_ORDER". Fix genwqe. Cc: stable@vger.kernel.org Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Frank Haverkamp <haver@linux.vnet.ibm.com> Signed-off-by:
-
Yan, Zheng authored
commit 3c1392d4 upstream. Updating mseq makes client think importer mds has accepted all prior cap messages and importer mds knows what caps client wants. Actually some cap messages may have been dropped because of mseq mismatch. If mseq is left untouched, importing cap's mds_wanted later will get reset by cap import message. Cc: stable@vger.kernel.org Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Linus Torvalds authored
commit c40f7d74 upstream. Zhipeng Xie, Xie XiuQi and Sargun Dhillon reported lockups in the scheduler under high loads, starting at around the v4.18 time frame, and Zhipeng Xie tracked it down to bugs in the rq->leaf_cfs_rq_list manipulation. Do a (manual) revert of: a9e7f654 ("sched/fair: Fix O(nr_cgroups) in load balance path") It turns out that the list_del_leaf_cfs_rq() introduced by this commit is a surprising property that was not considered in followup commits such as: 9c2791f9 ("sched/fair: Fix hierarchical order in rq->leaf_cfs_rq_list") As Vincent Guittot explains: "I think that there is a bigger problem with commit a9e7f654 and cfs_rq throttling: Let take the example of the following topology TG2 --> TG1 --> root: 1) The 1st time a task is enqueued, we will add TG2 cfs_rq then TG1 cfs_rq to leaf_cfs_rq_list and we are sure to do the whole branch in one path because it has never been used and can't be throttled so tmp_alone_branch will point to leaf_cfs_rq_list at the end. 2) Then TG1 is throttled 3) and we add TG3 as a new child of TG1. 4) The 1st enqueue of a task on TG3 will add TG3 cfs_rq just before TG1 cfs_rq and tmp_alone_branch will stay on rq->leaf_cfs_rq_list. With commit a9e7f654, we can del a cfs_rq from rq->leaf_cfs_rq_list. So if the load of TG1 cfs_rq becomes NULL before step 2) above, TG1 cfs_rq is removed from the list. Then at step 4), TG3 cfs_rq is added at the beginning of rq->leaf_cfs_rq_list but tmp_alone_branch still points to TG3 cfs_rq because its throttled parent can't be enqueued when the lock is released. tmp_alone_branch doesn't point to rq->leaf_cfs_rq_list whereas it should. So if TG3 cfs_rq is removed or destroyed before tmp_alone_branch points on another TG cfs_rq, the next TG cfs_rq that will be added, will be linked outside rq->leaf_cfs_rq_list - which is bad. In addition, we can break the ordering of the cfs_rq in rq->leaf_cfs_rq_list but this ordering is used to update and propagate the update from leaf down to root." Instead of trying to work through all these cases and trying to reproduce the very high loads that produced the lockup to begin with, simplify the code temporarily by reverting a9e7f654 - which change was clearly not thought through completely. This (hopefully) gives us a kernel that doesn't lock up so people can continue to enjoy their holidays without worrying about regressions. ;-) [ mingo: Wrote changelog, fixed weird spelling in code comment while at it. ] Analyzed-by:
Xie XiuQi <xiexiuqi@huawei.com> Analyzed-by:
Vincent Guittot <vincent.guittot@linaro.org> Reported-by:
Zhipeng Xie <xiezhipeng1@huawei.com> Reported-by:
Sargun Dhillon <sargun@sargun.me> Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Sohil Mehta authored
commit 3569dd07 upstream. The Intel IOMMU driver opportunistically skips a few top level page tables from the domain paging directory while programming the IOMMU context entry. However there is an implicit assumption in the code that domain's adjusted guest address width (agaw) would always be greater than IOMMU's agaw. The IOMMU capabilities in an upcoming platform cause the domain's agaw to be lower than IOMMU's agaw. The issue is seen when the IOMMU supports both 4-level and 5-level paging. The domain builds a 4-level page table based on agaw of 2. However the IOMMU's agaw is set as 3 (5-level). In this case the code incorrectly tries to skip page page table levels. This causes the IOMMU driver to avoid programming the context entry. The fix handles this case and programs the context entry accordingly. Fixes: de24e553 ("iommu/vt-d: Simplify domain_context_mapping_one") Cc: <stable@vger.kernel.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by:
Lu Baolu <baolu.lu@linux.intel.com> Reported-by:
Ramos Falcon, Ernesto R <ernesto.r.ramos.falcon@intel.com> Tested-by:
Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by:
Sohil Mehta <sohil.mehta@intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Sagi Grimberg authored
commit e48d8ed9 upstream. Error completions must still contain a valid wr_id and qp_num such that the consumer can rely on. Correctly fill these fields in receive error completions. Reported-by:
Walker Benjamin <benjamin.walker@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Tested-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Dominique Martinet authored
commit 574d356b upstream. If the requested msize is too small (either from command line argument or from the server version reply), we won't get any work done. If it's *really* too small, nothing will work, and this got caught by syzbot recently (on a new kmem_cache_create_usercopy() call) Just set a minimum msize to 4k in both code paths, until someone complains they have a use-case for a smaller msize. We need to check in both mount option and server reply individually because the msize for the first version request would be unchecked with just a global check on clnt->msize. Link: http://lkml.kernel.org/r/1541407968-31350-1-git-send-email-asmadeus@codewreck.org Reported-by: syzbot+0c1d61e4db7db94102ca@syzkaller.appspotmail.com Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: stable@vger.kernel.org Signed-off-by:
-
Breno Leitao authored
commit e1c3743e upstream. On a signal handler return, the user could set a context with MSR[TS] bits set, and these bits would be copied to task regs->msr. At restore_tm_sigcontexts(), after current task regs->msr[TS] bits are set, several __get_user() are called and then a recheckpoint is executed. This is a problem since a page fault (in kernel space) could happen when calling __get_user(). If it happens, the process MSR[TS] bits were already set, but recheckpoint was not executed, and SPRs are still invalid. The page fault can cause the current process to be de-scheduled, with MSR[TS] active and without tm_recheckpoint() being called. More importantly, without TEXASR[FS] bit set also. Since TEXASR might not have the FS bit set, and when the process is scheduled back, it will try to reclaim, which will be aborted because of the CPU is not in the suspended state, and, then, recheckpoint. This recheckpoint will restore thread->texasr into TEXASR SPR, which might be zero, hitting a BUG_ON(). kernel BUG at /build/linux-sf3Co9/linux-4.9.30/arch/powerpc/kernel/tm.S:434! cpu 0xb: Vector: 700 (Program Check) at [c00000041f1576d0] pc: c000000000054550: restore_gprs+0xb0/0x180 lr: 0000000000000000 sp: c00000041f157950 msr: 8000000100021033 current = 0xc00000041f143000 paca = 0xc00000000fb86300 softe: 0 irq_happened: 0x01 pid = 1021, comm = kworker/11:1 kernel BUG at /build/linux-sf3Co9/linux-4.9.30/arch/powerpc/kernel/tm.S:434! Linux version 4.9.0-3-powerpc64le (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26) enter ? for help [c00000041f157b30] c00000000001bc3c tm_recheckpoint.part.11+0x6c/0xa0 [c00000041f157b70] c00000000001d184 __switch_to+0x1e4/0x4c0 [c00000041f157bd0] c00000000082eeb8 __schedule+0x2f8/0x990 [c00000041f157cb0] c00000000082f598 schedule+0x48/0xc0 [c00000041f157ce0] c0000000000f0d28 worker_thread+0x148/0x610 [c00000041f157d80] c0000000000f96b0 kthread+0x120/0x140 [c00000041f157e30] c00000000000c0e0 ret_from_kernel_thread+0x5c/0x7c This patch simply delays the MSR[TS] set, so, if there is any page fault in the __get_user() section, it does not have regs->msr[TS] set, since the TM structures are still invalid, thus avoiding doing TM operations for in-kernel exceptions and possible process reschedule. With this patch, the MSR[TS] will only be set just before recheckpointing and setting TEXASR[FS] = 1, thus avoiding an interrupt with TM registers in invalid state. Other than that, if CONFIG_PREEMPT is set, there might be a preemption just after setting MSR[TS] and before tm_recheckpoint(), thus, this block must be atomic from a preemption perspective, thus, calling preempt_disable/enable() on this code. It is not possible to move tm_recheckpoint to happen earlier, because it is required to get the checkpointed registers from userspace, with __get_user(), thus, the only way to avoid this undesired behavior is delaying the MSR[TS] set. The 32-bits signal handler seems to be safe this current issue, but, it might be exposed to the preemption issue, thus, disabling preemption in this chunk of code. Changes from v2: * Run the critical section with preempt_disable. Fixes: 87b4e539 ("powerpc/tm: Fix return of active 64bit signals") Cc: stable@vger.kernel.org (v3.9+) Signed-off-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
-
Ard Biesheuvel authored
commit 3bbd3db8 upstream. readelf complains about the section layout of vmlinux when building with CONFIG_RELOCATABLE=y (for KASLR): readelf: Warning: [21]: Link field (0) should index a symtab section. readelf: Warning: [21]: Info field (0) should index a relocatable section. Also, it seems that our use of '-pie -shared' is contradictory, and thus ambiguous. In general, the way KASLR is wired up at the moment is highly tailored to how ld.bfd happens to implement (and conflate) PIE executables and shared libraries, so given the current effort to support other toolchains, let's fix some of these issues as well. - Drop the -pie linker argument and just leave -shared. In ld.bfd, the differences between them are unclear (except for the ELF type of the produced image [0]) but lld chokes on seeing both at the same time. - Rename the .rela output section to .rela.dyn, as is customary for shared libraries and PIE executables, so that it is not misidentified by readelf as a static relocation section (producing the warnings above). - Pass the -z notext and -z norelro options to explicitly instruct the linker to permit text relocations, and to omit the RELRO program header (which requires a certain section layout that we don't adhere to in the kernel). These are the defaults for current versions of ld.bfd. - Discard .eh_frame and .gnu.hash sections to avoid them from being emitted between .head.text and .text, screwing up the section layout. These changes only affect the ELF image, and produce the same binary image. [0] b9dce7f1 ("arm64: kernel: force ET_DYN ELF type for ...") Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Smith <peter.smith@linaro.org> Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Ard Biesheuvel authored
commit dd6846d7 upstream. Commit 1212f7a1 ("scripts/kallsyms: filter arm64's __efistub_ symbols") updated the kallsyms code to filter out symbols with the __efistub_ prefix explicitly, so we no longer require the hack in our linker script to emit them as absolute symbols. Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Ard Biesheuvel authored
commit 1212f7a1 upstream. On arm64, the EFI stub and the kernel proper are essentially the same binary, although the EFI stub executes at a different virtual address as the kernel. For this reason, the EFI stub is restricted in the symbols it can link to, which is ensured by prefixing all EFI stub symbols with __efistub_ (and emitting __efistub_ prefixed aliases for routines that may be shared between the core kernel and the stub) These symbols are leaking into kallsyms, polluting the namespace, so let's filter them explicitly. Signed-off-by:
-
Benjamin Coddington authored
commit b8eee0e9 upstream. Commit 9d5b86ac ("fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks") specified that the l_pid returned for F_GETLK on a local file that has a remote lock should be the pid of the lock manager process. That commit, while updating other filesystems, failed to update lockd, such that locks created by lockd had their fl_pid set to that of the remote process holding the lock. Fix that here to be the pid of lockd. Also, fix the client case so that the returned lock pid is negative, which indicates a remote lock on a remote file. Fixes: 9d5b86ac ("fs/locks: Remove fl_nspid and use fs-specific...") Cc: stable@vger.kernel.org Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Ondrej Mosnacek authored
commit 5df275cd upstream. Do the LE conversions before doing the Infiniband-related range checks. The incorrect checks are otherwise causing a failure to load any policy with an ibendportcon rule on BE systems. This can be reproduced by running (on e.g. ppc64): cat >my_module.cil <<EOF (type test_ibendport_t) (roletype object_r test_ibendport_t) (ibendportcon mlx4_0 1 (system_u object_r test_ibendport_t ((s0) (s0)))) EOF semodule -i my_module.cil Also, fix loading/storing the 64-bit subnet prefix for OCON_IBPKEY to use a correctly aligned buffer. Finally, do not use the 'nodebuf' (u32) buffer where 'buf' (__le32) should be used instead. Tested internally on a ppc64 machine with a RHEL 7 kernel with this patch applied. Cc: Daniel Jurgens <danielj@mellanox.com> Cc: Eli Cohen <eli@mellanox.com> Cc: James Morris <jmorris@namei.org> Cc: Doug Ledford <dledford@redhat.com> Cc: <stable@vger.kernel.org> # 4.13+ Fixes: a806f7a1 ("selinux: Create policydb version for Infiniband support") Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Larry Finger authored
commit 8ea3819c upstream. The cordic routine for calculating sines and cosines that was added in commit 6f98e62a ("b43: update cordic code to match current specs") contains an error whereby a quantity declared u32 can in fact go negative. This problem was detected by Priit Laes who is switching b43 to use the routine in the library functions of the kernel. Fixes: 98650454 ("b43: make cordic common (LP-PHY and N-PHY need it)") Reported-by:
Priit Laes <plaes@plaes.org> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Stable <stable@vger.kernel.org> # 2.6.34 Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Andreas Gruenbacher authored
commit 2d29f6b9 upstream. Fix the resource group wrap-around logic in gfs2_rbm_find that commit e579ed4f broke. The bug can lead to unnecessary repeated scanning of the same bitmaps; there is a risk that future changes will turn this into an endless loop. Fixes: e579ed4f ("GFS2: Introduce rbm field bii") Cc: stable@vger.kernel.org # v3.13+ Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Andreas Gruenbacher authored
commit 6ff9b09e upstream. In gfs2_create_inode, after setting and releasing the acl / default_acl, the acl / default_acl pointers are not set to NULL as they should be. In that state, when the function reaches label fail_free_acls, gfs2_create_inode will try to release the same acls again. Fix that by setting the pointers to NULL after releasing the acls. Slightly simplify the logic. Also, posix_acl_release checks for NULL already, so there is no need to duplicate those checks here. Fixes: e01580bf ("gfs2: use generic posix ACL infrastructure") Reported-by:
Pan Bian <bianpan2016@163.com> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org # v4.9+ Signed-off-by:
-
Vasily Averin authored
commit d47b41ac upstream. According to comment in dlm_user_request() ua should be freed in dlm_free_lkb() after successful attach to lkb. However ua is attached to lkb not in set_lock_args() but later, inside request_lock(). Fixes 597d0cae ("[DLM] dlm: user locks") Cc: stable@kernel.org # 2.6.19 Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
David Teigland <teigland@redhat.com> Signed-off-by:
-
Vasily Averin authored
commit c0174726 upstream. Fixes 6d40c4a7 ("dlm: improve error and debug messages") Cc: stable@kernel.org # 3.5 Signed-off-by:
-
Vasily Averin authored
commit 23851e97 upstream. Fixes 3d6aa675 ("dlm: keep lkbs in idr") Cc: stable@kernel.org # 3.1 Signed-off-by:
-
Vasily Averin authored
commit b982896c upstream. If allocation fails on last elements of array need to free already allocated elements. v2: just move existing out_rsbtbl label to right place Fixes 789924ba635f ("dlm: fix race between remove and lookup") Cc: stable@kernel.org # 3.6 Signed-off-by:
-
Hui Peng authored
commit cbb2ebf7 upstream. In `create_composite_quirk`, the terminating condition of for loops is `quirk->ifnum < 0`. So any composite quirks should end with `struct snd_usb_audio_quirk` object with ifnum < 0. for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) { ..... } the data field of Bower's & Wilkins PX headphones usb device device quirks do not end with {.ifnum = -1}, wihch may result in out-of-bound read. This Patch fix the bug by adding an ending quirk object. Fixes: 240a8af9 ("ALSA: usb-audio: Add a quirck for B&W PX headphones") Signed-off-by:
Hui Peng <benquike@163.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit f4351a19 upstream. The parser for the processing unit reads bNrInPins field before the bLength sanity check, which may lead to an out-of-bound access when a malformed descriptor is given. Fix it by assignment after the bLength check. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit 1524f4e4 upstream. The "chip->dsp_spos_instance" can be NULL on some of the ealier error paths in snd_cs46xx_create(). Reported-by:
"Yavuz, Tuba" <tuba@ece.ufl.edu> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Damien Le Moal authored
commit d57f9da8 upstream. struct bioctx includes the ref refcount_t to track the number of I/O fragments used to process a target BIO as well as ensure that the zone of the BIO is kept in the active state throughout the lifetime of the BIO. However, since decrementing of this reference count is done in the target .end_io method, the function bio_endio() must be called multiple times for read and write target BIOs, which causes problems with the value of the __bi_remaining struct bio field for chained BIOs (e.g. the clone BIO passed by dm core is large and splits into fragments by the block layer), resulting in incorrect values and inconsistencies with the BIO_CHAIN flag setting. This is turn triggers the BUG_ON() call: BUG_ON(atomic_read(&bio->__bi_remaining) <= 0); in bio_remaining_done() called from bio_endio(). Fix this ensuring that bio_endio() is called only once for any target BIO by always using internal clone BIOs for processing any read or write target BIO. This allows reference counting using the target BIO context counter to trigger the target BIO completion bio_endio() call once all data, metadata and other zone work triggered by the BIO complete. Overall, this simplifies the code too as the target .end_io becomes unnecessary and differences between read and write BIO issuing and completion processing disappear. Fixes: 3b1a94c8 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit e4b069e0 upstream. Since commit d1ac3ff0 ("dm verity: switch to using asynchronous hash crypto API") dm-verity uses asynchronous crypto calls for verification, so that it can use hardware with asynchronous processing of crypto operations. These asynchronous calls don't support vmalloc memory, but the buffer data can be allocated with vmalloc if dm-bufio is short of memory and uses a reserved buffer that was preallocated in dm_bufio_client_create(). Fix verity_hash_update() so that it deals with vmalloc'd memory correctly. Reported-by:
"Xiao, Jin" <jin.xiao@intel.com> Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Fixes: d1ac3ff0 ("dm verity: switch to using asynchronous hash crypto API") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by:
-
Stefan Hajnoczi authored
commit a72b69dc upstream. The vhost_vsock->guest_cid field is uninitialized when /dev/vhost-vsock is opened until the VHOST_VSOCK_SET_GUEST_CID ioctl is called. kvmalloc(..., GFP_KERNEL | __GFP_RETRY_MAYFAIL) does not zero memory. All other vhost_vsock fields are initialized explicitly so just initialize this field too. Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Cc: Daniel Verkamp <dverkamp@chromium.org> Signed-off-by:
-
Joel Stanley authored
commit e213574a upstream. We cannot build these files with clang as it does not allow altivec instructions in assembly when -msoft-float is passed. Jinsong Ji <jji@us.ibm.com> wrote: > We currently disable Altivec/VSX support when enabling soft-float. So > any usage of vector builtins will break. > > Enable Altivec/VSX with soft-float may need quite some clean up work, so > I guess this is currently a limitation. > > Removing -msoft-float will make it work (and we are lucky that no > floating point instructions will be generated as well). This is a workaround until the issue is resolved in clang. Link: https://bugs.llvm.org/show_bug.cgi?id=31177 Link: https://github.com/ClangBuiltLinux/linux/issues/239Signed-off-by:
Joel Stanley <joel@jms.id.au> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Joel Stanley authored
commit 813af51f upstream. Clang needs to be told which target it is building for when cross compiling. Link: https://github.com/ClangBuiltLinux/linux/issues/259Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> [nc: Use 'ifeq ($(cc-name),clang)' instead of 'ifdef CONFIG_CC_IS_CLANG' because that config does not exist in 4.14; the Kconfig rewrite that added that config happened in 4.18] Signed-off-by:
-
Joel Stanley authored
commit 3bd98050 upstream. The powerpc makefile will use these in it's boot wrapper. Signed-off-by:
-
Masahiro Yamada authored
commit 238bcbc4 upstream. Collect basic Clang options such as --target, --prefix, --gcc-toolchain, -no-integrated-as into a single variable CLANG_FLAGS so that it can be easily reused in other parts of Makefile. Signed-off-by:
Greg Hackmann <ghackmann@google.com> Signed-off-by:
-
Masahiro Yamada authored
commit dbe27a00 upstream. We are still a way off the Clang's integrated assembler support for the kernel. Hence, -no-integrated-as is mandatory to build the kernel with Clang. If you had an ancient version of Clang that does not recognize this option, you would not be able to compile the kernel anyway. Signed-off-by:
-
Matthias Kaehlcke authored
commit 584ed9fa upstream. The raid10 driver can't be built with clang since it uses a variable length array in a structure (VLAIS): drivers/md/raid10.c:4583:17: error: fields must have a constant size: 'variable length array in structure' extension will never be supported Allocate the r10bio struct with kmalloc instead of using the VLAIS construct. Shaohua: set the MD_RECOVERY_INTR bit Neil Brown: use GFP_NOIO Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Joel Stanley authored
When building to record the mcount locations the kernel uses KBUILD_CFLAGS but not KBUILD_CPPFLAGS. This means it lacks -Qunused-arguments when building with clang, resulting in a lot of noisy warnings. Signed-off-by:
-
Joel Stanley authored
commit aea44714 upstream. The powerpc kernel uses setjmp which causes a warning when building with clang: In file included from arch/powerpc/xmon/xmon.c:51: ./arch/powerpc/include/asm/setjmp.h:15:13: error: declaration of built-in function 'setjmp' requires inclusion of the header <setjmp.h> [-Werror,-Wbuiltin-requires-header] extern long setjmp(long *); ^ ./arch/powerpc/include/asm/setjmp.h:16:13: error: declaration of built-in function 'longjmp' requires inclusion of the header <setjmp.h> [-Werror,-Wbuiltin-requires-header] extern void longjmp(long *, long); ^ This *is* the header and we're not using the built-in setjump but rather the one in arch/powerpc/kernel/misc.S. As the compiler warning does not make sense, it for the files where setjmp is used. Signed-off-by:
-
Nicholas Piggin authored
commit 6977f95e upstream. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
-
