- 10 Jun, 2021 29 commits
-
-
Paolo Abeni authored
warn_bad_map() produces a kernel WARN on bad input coming from the network. Use pr_debug() to avoid spamming the system log. Additionally, when the right bound check fails, warn_bad_map() reports the wrong ssn value, let's fix it. Fixes: 648ef4b8 ("mptcp: Implement MPTCP receive path") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/107Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Currently we rely on the subflow->data_avail field, which is subject to races: ssk1 skb len = 500 DSS(seq=1, len=1000, off=0) # data_avail == MPTCP_SUBFLOW_DATA_AVAIL ssk2 skb len = 500 DSS(seq = 501, len=1000) # data_avail == MPTCP_SUBFLOW_DATA_AVAIL ssk1 skb len = 500 DSS(seq = 1, len=1000, off =500) # still data_avail == MPTCP_SUBFLOW_DATA_AVAIL, # as the skb is covered by a pre-existing map, # which was in-sequence at reception time. Instead we can explicitly check if some has been received in-sequence, propagating the info from __mptcp_move_skbs_from_subflow(). Additionally add the 'ONCE' annotation to the 'data_avail' memory access, as msk will read it outside the subflow socket lock. Fixes: 648ef4b8 ("mptcp: Implement MPTCP receive path") Signed-off-by:
-
Paolo Abeni authored
If the host is under sever memory pressure, and RX forward memory allocation for the msk fails, we try to borrow the required memory from the ingress subflow. The current attempt is a bit flaky: if skb->truesize is less than SK_MEM_QUANTUM, the ssk will not release any memory, and the next schedule will fail again. Instead, directly move the required amount of pages from the ssk to the msk, if available Fixes: 9c3f94e1 ("mptcp: add missing memory scheduling in the rx path") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix a crash when stateful expression with its own gc callback is used in a set definition. 2) Skip IPv6 packets from any link-local address in IPv6 fib expression. Add a selftest for this scenario, from Florian Westphal. ==================== Signed-off-by: -
David S. Miller authored
Maxim Mikityanskiy says: ==================== Fix out of bounds when parsing TCP options This series fixes out-of-bounds access in various places in the kernel where parsing of TCP options takes place. Fortunately, many more occurrences don't have this bug. v2 changes: synproxy: Added an early return when length < 0 to avoid calling skb_header_pointer with negative length. sch_cake: Added doff validation to avoid parsing garbage. ==================== Signed-off-by: -
Maxim Mikityanskiy authored
The TCP option parser in cake qdisc (cake_get_tcpopt and cake_tcph_may_drop) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad2 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). v2 changes: Added doff validation in cake_get_tcphdr to avoid parsing garbage as TCP header. Although it wasn't strictly an out-of-bounds access (memory was allocated), garbage values could be read where CAKE expected the TCP header if doff was smaller than 5. Cc: Young Xiao <92siuyang@gmail.com> Fixes: 8b713881 ("sch_cake: Add optional ACK filter") Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Acked-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
-
Maxim Mikityanskiy authored
The TCP option parser in mptcp (mptcp_get_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad2 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). Cc: Young Xiao <92siuyang@gmail.com> Fixes: cec37a6e ("mptcp: Handle MP_CAPABLE options for outgoing connections") Signed-off-by:
-
Maxim Mikityanskiy authored
The TCP option parser in synproxy (synproxy_parse_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad2 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). v2 changes: Added an early return when length < 0 to avoid calling skb_header_pointer with negative length. Cc: Young Xiao <92siuyang@gmail.com> Fixes: 48b1de4c ("netfilter: add SYNPROXY core/target") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Eric Dumazet authored
There is a known race in packet_sendmsg(), addressed in commit 32d3182c ("net/packet: fix race in tpacket_snd()") Now we have data_race(), we can use it to avoid a future KCSAN warning, as syzbot loves stressing af_packet sockets :) Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
UDP sendmsg() path can be lockless, it is possible for another thread to re-connect an change sk->sk_txhash under us. There is no serious impact, but we can use READ_ONCE()/WRITE_ONCE() pair to document the race. BUG: KCSAN: data-race in __ip4_datagram_connect / skb_set_owner_w write to 0xffff88813397920c of 4 bytes by task 30997 on cpu 1: sk_set_txhash include/net/sock.h:1937 [inline] __ip4_datagram_connect+0x69e/0x710 net/ipv4/datagram.c:75 __ip6_datagram_connect+0x551/0x840 net/ipv6/datagram.c:189 ip6_datagram_connect+0x2a/0x40 net/ipv6/datagram.c:272 inet_dgram_connect+0xfd/0x180 net/ipv4/af_inet.c:580 __sys_connect_file net/socket.c:1837 [inline] __sys_connect+0x245/0x280 net/socket.c:1854 __do_sys_connect net/socket.c:1864 [inline] __se_sys_connect net/socket.c:1861 [inline] __x64_sys_connect+0x3d/0x50 net/socket.c:1861 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88813397920c of 4 bytes by task 31039 on cpu 0: skb_set_hash_from_sk include/net/sock.h:2211 [inline] skb_set_owner_w+0x118/0x220 net/core/sock.c:2101 sock_alloc_send_pskb+0x452/0x4e0 net/core/sock.c:2359 sock_alloc_send_skb+0x2d/0x40 net/core/sock.c:2373 __ip6_append_data+0x1743/0x21a0 net/ipv6/ip6_output.c:1621 ip6_make_skb+0x258/0x420 net/ipv6/ip6_output.c:1983 udpv6_sendmsg+0x160a/0x16b0 net/ipv6/udp.c:1527 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:642 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490 __do_sys_sendmmsg net/socket.c:2519 [inline] __se_sys_sendmmsg net/socket.c:2516 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xbca3c43d -> 0xfdb309e0 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 31039 Comm: syz-executor.2 Not tainted 5.13.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
sock_error() is known to be racy. The code avoids an atomic operation is sk_err is zero, and this field could be changed under us, this is fine. Sysbot reported: BUG: KCSAN: data-race in sock_alloc_send_pskb / unix_release_sock write to 0xffff888131855630 of 4 bytes by task 9365 on cpu 1: unix_release_sock+0x2e9/0x6e0 net/unix/af_unix.c:550 unix_release+0x2f/0x50 net/unix/af_unix.c:859 __sock_release net/socket.c:599 [inline] sock_close+0x6c/0x150 net/socket.c:1258 __fput+0x25b/0x4e0 fs/file_table.c:280 ____fput+0x11/0x20 fs/file_table.c:313 task_work_run+0xae/0x130 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:174 [inline] exit_to_user_mode_prepare+0x156/0x190 kernel/entry/common.c:208 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:301 do_syscall_64+0x56/0x90 arch/x86/entry/common.c:57 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888131855630 of 4 bytes by task 9385 on cpu 0: sock_error include/net/sock.h:2269 [inline] sock_alloc_send_pskb+0xe4/0x4e0 net/core/sock.c:2336 unix_dgram_sendmsg+0x478/0x1610 net/unix/af_unix.c:1671 unix_seqpacket_sendmsg+0xc2/0x100 net/unix/af_unix.c:2055 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 __sys_sendmsg_sock+0x25/0x30 net/socket.c:2416 io_sendmsg fs/io_uring.c:4367 [inline] io_issue_sqe+0x231a/0x6750 fs/io_uring.c:6135 __io_queue_sqe+0xe9/0x360 fs/io_uring.c:6414 __io_req_task_submit fs/io_uring.c:2039 [inline] io_async_task_func+0x312/0x590 fs/io_uring.c:5074 __tctx_task_work fs/io_uring.c:1910 [inline] tctx_task_work+0x1d4/0x3d0 fs/io_uring.c:1924 task_work_run+0xae/0x130 kernel/task_work.c:164 tracehook_notify_signal include/linux/tracehook.h:212 [inline] handle_signal_work kernel/entry/common.c:145 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0xf8/0x190 kernel/entry/common.c:208 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:301 do_syscall_64+0x56/0x90 arch/x86/entry/common.c:57 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000068 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 9385 Comm: syz-executor.3 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== net: bridge: vlan tunnel egress path fixes These two fixes take care of tunnel_dst problems in the vlan tunnel egress path. Patch 01 fixes a null ptr deref due to the lockless use of tunnel_dst pointer without checking it first, and patch 02 fixes a use-after-free issue due to wrong dst refcounting (dst_clone() -> dst_hold_safe()). Both fix the same commit and should be queued for stable backports: Fixes: 11538d03 ("bridge: vlan dst_metadata hooks in ingress and egress paths") v2: no changes, added stable list to CC ==================== Signed-off-by:
-
Nikolay Aleksandrov authored
The egress tunnel code uses dst_clone() and directly sets the result which is wrong because the entry might have 0 refcnt or be already deleted, causing number of problems. It also triggers the WARN_ON() in dst_hold()[1] when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and checking if a reference was actually taken before setting the dst. [1] dmesg WARN_ON log and following refcnt errors WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net CPU: 5 PID: 38 Comm: ksoftirqd/5 Kdump: loaded Tainted: G W 5.13.0-rc3+ #360 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Code: e8 85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc 01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49 RSP: 0018:ffff8881003d39e8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0 RBP: ffff8881040c6700 R08: 0000000000000000 R09: 0000000000000001 R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401 FS: 0000000000000000(0000) GS:ffff88822bf40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0 Call Trace: br_handle_vlan+0xbc/0xca [bridge] __br_forward+0x23/0x164 [bridge] deliver_clone+0x41/0x48 [bridge] br_handle_frame_finish+0x36f/0x3aa [bridge] ? skb_dst+0x2e/0x38 [bridge] ? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge] ? br_handle_frame_finish+0x3aa/0x3aa [bridge] br_handle_frame+0x2c3/0x377 [bridge] ? __skb_pull+0x33/0x51 ? vlan_do_receive+0x4f/0x36a ? br_handle_frame_finish+0x3aa/0x3aa [bridge] __netif_receive_skb_core+0x539/0x7c6 ? __list_del_entry_valid+0x16e/0x1c2 __netif_receive_skb_list_core+0x6d/0xd6 netif_receive_skb_list_internal+0x1d9/0x1fa gro_normal_list+0x22/0x3e dev_gro_receive+0x55b/0x600 ? detach_buf_split+0x58/0x140 napi_gro_receive+0x94/0x12e virtnet_poll+0x15d/0x315 [virtio_net] __napi_poll+0x2c/0x1c9 net_rx_action+0xe6/0x1fb __do_softirq+0x115/0x2d8 run_ksoftirqd+0x18/0x20 smpboot_thread_fn+0x183/0x19c ? smpboot_unregister_percpu_thread+0x66/0x66 kthread+0x10a/0x10f ? kthread_mod_delayed_work+0xb6/0xb6 ret_from_fork+0x22/0x30 ---[ end trace 49f61b07f775fd2b ]--- dst_release: dst:00000000c02d677a refcnt:-1 dst_release underflow Cc: stable@vger.kernel.org Fixes: 11538d03 ("bridge: vlan dst_metadata hooks in ingress and egress paths") Signed-off-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
-
Nikolay Aleksandrov authored
This patch fixes a tunnel_dst null pointer dereference due to lockless access in the tunnel egress path. When deleting a vlan tunnel the tunnel_dst pointer is set to NULL without waiting a grace period (i.e. while it's still usable) and packets egressing are dereferencing it without checking. Use READ/WRITE_ONCE to annotate the lockless use of tunnel_id, use RCU for accessing tunnel_dst and make sure it is read only once and checked in the egress path. The dst is already properly RCU protected so we don't need to do anything fancy than to make sure tunnel_id and tunnel_dst are read only once and checked in the egress path. Cc: stable@vger.kernel.org Fixes: 11538d03 ("bridge: vlan dst_metadata hooks in ingress and egress paths") Signed-off-by:
-
Zheng Yongjun authored
Function 'ping_queue_rcv_skb' not always return success, which will also return fail. If not check the wrong return value of it, lead to function `ping_rcv` return success. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
-
Willem de Bruijn authored
msg_zerocopy signals if a send operation required copying with a flag in serr->ee.ee_code. This field can be incorrect as of the below commit, as a result of both structs uarg and serr pointing into the same skb->cb[]. uarg->zerocopy must be read before skb->cb[] is reinitialized to hold serr. Similar to other fields len, hi and lo, use a local variable to temporarily hold the value. This was not a problem before, when the value was passed as a function argument. Fixes: 75518851 ("skbuff: Push status and refcounts into sock_zerocopy_callback") Reported-by:
Talal Ahmad <talalahmad@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-fixes-2021-06-09 ==================== Signed-off-by: -
Aya Levin authored
The device is able to offload either the outer header csum or inner header csum. The driver utilizes the inner csum offload. So, prohibit setting of tx-gre-csum-segmentation and let it be: off[fixed]. Fixes: 27299841 ("net/mlx5e: Support TSO and TX checksum offloads for GRE tunnels") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Aya Levin authored
The device is able to offload either the outer header csum or inner header csum. The driver utilizes the inner csum offload. Hence, block setting of tx-udp_tnl-csum-segmentation and set it to off[fixed]. Fixes: b49663c8 ("net/mlx5e: Add support for UDP tunnel segmentation with outer checksum offload") Signed-off-by:
-
Shay Drory authored
In the scenario described below, an EQ can remain in FIRED state which can result in missing an interrupt generation. The scenario: device mlx5_core driver ------ ---------------- EQ1.eqe generated EQ1.MSI-X sent EQ1.state = FIRED EQ2.eqe generated mlx5_irq() polls - eq1_eqes() arm eq1 polls - eq2_eqes() arm eq2 EQ2.MSI-X sent EQ2.state = FIRED mlx5_irq() polls - eq2_eqes() -- no eqes found driver skips EQ arming; ->EQ2 remains fired, misses generating interrupt. Hence, always arm the EQ by reverting the cited commit in fixes tag. Fixes: d894892d ("net/mlx5: Arm only EQs with EQEs") Signed-off-by:Shay Drory <shayd@nvidia.com> Reviewed-by:
Parav Pandit <parav@nvidia.com> Signed-off-by:
-
Aya Levin authored
Steering packets to PTP-SQ should be done only if the SKB has SKBTX_HW_TSTAMP set in the tx_flags. While here, take the function into a header and inline it. Set the whole condition to select the PTP-SQ to unlikely. Fixes: 24c22dd0 ("net/mlx5e: Add states to PTP channel") Signed-off-by:
Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by:
-
Aya Levin authored
Since the driver opens the PTP-RQ under channel 0, it appears to the stack as if the SKB was received on rxq0. So from thew stack POV there are still the same number of RX queues. Fixes: 960fbfe2 ("net/mlx5e: Allow coexistence of CQE compression and HW TS PTP") Signed-off-by:
-
Chris Mi authored
When changing eswitch mode, the netdev is detached from the hardware resources. So verify dev is present in get devlink port ndo. Otherwise, we will hit the following panic: [241535.973539] RIP: 0010:__devlink_port_phys_port_name_get+0x13/0x1b0 [241535.976471] RSP: 0018:ffff9eaf0ae1b7c8 EFLAGS: 00010292 [241535.977471] RAX: 000000000002d370 RBX: 000000000002d370 RCX: 0000000000000000 [241535.978479] RDX: 0000000000000010 RSI: ffff9eaf0ae1b858 RDI: 000000000002d370 [241535.979482] RBP: ffff9eaf0ae1b7e0 R08: 000000000000002a R09: ffff8888d54d13da [241535.980486] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8888e6700000 [241535.981491] R13: ffff9eaf0ae1b858 R14: 0000000000000010 R15: 0000000000000000 [241535.982489] FS: 00007fd374ef3740(0000) GS:ffff88909ea00000(0000) knlGS:0000000000000000 [241535.983494] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [241535.984487] CR2: 000000000002d444 CR3: 000000089fd26006 CR4: 00000000003706e0 [241535.985502] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [241535.986499] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [241535.987477] Call Trace: [241535.988426] ? nla_put_64bit+0x71/0xa0 [241535.989368] devlink_compat_phys_port_name_get+0x50/0xa0 [241535.990312] dev_get_phys_port_name+0x4b/0x60 [241535.991252] rtnl_fill_ifinfo+0x57b/0xcb0 [241535.992192] rtnl_dump_ifinfo+0x58f/0x6d0 [241535.993123] ? ksize+0x14/0x20 [241535.994033] ? __alloc_skb+0xe8/0x250 [241535.994935] netlink_dump+0x17c/0x300 [241535.995821] netlink_recvmsg+0x1de/0x2c0 [241535.996677] sock_recvmsg+0x70/0x80 [241535.997518] ____sys_recvmsg+0x9b/0x1b0 [241535.998360] ? iovec_from_user+0x82/0x120 [241535.999202] ? __import_iovec+0x2c/0x130 [241536.000031] ___sys_recvmsg+0x94/0x130 [241536.000850] ? __handle_mm_fault+0x56d/0x6e0 [241536.001668] __sys_recvmsg+0x5f/0xb0 [241536.002464] ? syscall_enter_from_user_mode+0x2b/0x80 [241536.003242] __x64_sys_recvmsg+0x1f/0x30 [241536.004008] do_syscall_64+0x38/0x50 [241536.004767] entry_SYSCALL_64_after_hwframe+0x44/0xae [241536.005532] RIP: 0033:0x7fd375014f47 Fixes: 2ff349c5 ("net/mlx5e: Verify dev is present in some ndos") Signed-off-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Chris Mi <cmi@nvidia.com> Signed-off-by:
-
Maor Gottlieb authored
SW steering uses RC QP to write/read to/from ICM, hence it's not supported when RoCE is not supported as well. Fixes: 70605ea5 ("net/mlx5: DR, Expose APIs for direct rule managing") Signed-off-by:
Maor Gottlieb <maorg@nvidia.com> Reviewed-by:
Alex Vesker <valex@nvidia.com> Reviewed-by:
Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by:
-
Maor Gottlieb authored
Check if RoCE is supported by the device before enable it in the vport context and create all the RDMA steering objects. Fixes: 80f09dfc ("net/mlx5: Eswitch, enable RoCE loopback traffic") Signed-off-by:
-
Dima Chumak authored
When adding a hairpin flow, a firmware-side send queue is created for the peer net device, which claims some host memory pages for its internal ring buffer. If the peer net device is removed/unbound before the hairpin flow is deleted, then the send queue is not destroyed which leads to a stack trace on pci device remove: [ 748.005230] mlx5_core 0000:08:00.2: wait_func:1094:(pid 12985): MANAGE_PAGES(0x108) timeout. Will cause a leak of a command resource [ 748.005231] mlx5_core 0000:08:00.2: reclaim_pages:514:(pid 12985): failed reclaiming pages: err -110 [ 748.001835] mlx5_core 0000:08:00.2: mlx5_reclaim_root_pages:653:(pid 12985): failed reclaiming pages (-110) for func id 0x0 [ 748.002171] ------------[ cut here ]------------ [ 748.001177] FW pages counter is 4 after reclaiming all pages [ 748.001186] WARNING: CPU: 1 PID: 12985 at drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:685 mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ +0.002771] Modules linked in: cls_flower mlx5_ib mlx5_core ptp pps_core act_mirred sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay fuse [last unloaded: pps_core] [ 748.007225] CPU: 1 PID: 12985 Comm: tee Not tainted 5.12.0+ #1 [ 748.001376] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 748.002315] RIP: 0010:mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ 748.001679] Code: 28 00 00 00 0f 85 22 01 00 00 48 81 c4 b0 00 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c7 40 cc 19 a1 e8 9f 71 0e e2 <0f> 0b e9 30 ff ff ff 48 c7 c7 a0 cc 19 a1 e8 8c 71 0e e2 0f 0b e9 [ 748.003781] RSP: 0018:ffff88815220faf8 EFLAGS: 00010286 [ 748.001149] RAX: 0000000000000000 RBX: ffff8881b4900280 RCX: 0000000000000000 [ 748.001445] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102a441f51 [ 748.001614] RBP: 00000000000032b9 R08: 0000000000000001 R09: ffffed1054a15ee8 [ 748.001446] R10: ffff8882a50af73b R11: ffffed1054a15ee7 R12: fffffbfff07c1e30 [ 748.001447] R13: dffffc0000000000 R14: ffff8881b492cba8 R15: 0000000000000000 [ 748.001429] FS: 00007f58bd08b580(0000) GS:ffff8882a5080000(0000) knlGS:0000000000000000 [ 748.001695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 748.001309] CR2: 000055a026351740 CR3: 00000001d3b48006 CR4: 0000000000370ea0 [ 748.001506] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 748.001483] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 748.001654] Call Trace: [ 748.000576] ? mlx5_satisfy_startup_pages+0x290/0x290 [mlx5_core] [ 748.001416] ? mlx5_cmd_teardown_hca+0xa2/0xd0 [mlx5_core] [ 748.001354] ? mlx5_cmd_init_hca+0x280/0x280 [mlx5_core] [ 748.001203] mlx5_function_teardown+0x30/0x60 [mlx5_core] [ 748.001275] mlx5_uninit_one+0xa7/0xc0 [mlx5_core] [ 748.001200] remove_one+0x5f/0xc0 [mlx5_core] [ 748.001075] pci_device_remove+0x9f/0x1d0 [ 748.000833] device_release_driver_internal+0x1e0/0x490 [ 748.001207] unbind_store+0x19f/0x200 [ 748.000942] ? sysfs_file_ops+0x170/0x170 [ 748.001000] kernfs_fop_write_iter+0x2bc/0x450 [ 748.000970] new_sync_write+0x373/0x610 [ 748.001124] ? new_sync_read+0x600/0x600 [ 748.001057] ? lock_acquire+0x4d6/0x700 [ 748.000908] ? lockdep_hardirqs_on_prepare+0x400/0x400 [ 748.001126] ? fd_install+0x1c9/0x4d0 [ 748.000951] vfs_write+0x4d0/0x800 [ 748.000804] ksys_write+0xf9/0x1d0 [ 748.000868] ? __x64_sys_read+0xb0/0xb0 [ 748.000811] ? filp_open+0x50/0x50 [ 748.000919] ? syscall_enter_from_user_mode+0x1d/0x50 [ 748.001223] do_syscall_64+0x3f/0x80 [ 748.000892] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 748.001026] RIP: 0033:0x7f58bcfb22f7 [ 748.000944] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 748.003925] RSP: 002b:00007fffd7f2aaa8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 748.001732] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f58bcfb22f7 [ 748.001426] RDX: 000000000000000d RSI: 00007fffd7f2abc0 RDI: 0000000000000003 [ 748.001746] RBP: 00007fffd7f2abc0 R08: 0000000000000000 R09: 0000000000000001 [ 748.001631] R10: 00000000000001b6 R11: 0000000000000246 R12: 000000000000000d [ 748.001537] R13: 00005597ac2c24a0 R14: 000000000000000d R15: 00007f58bd084700 [ 748.001564] irq event stamp: 0 [ 748.000787] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 748.001399] hardirqs last disabled at (0): [<ffffffff813132cf>] copy_process+0x146f/0x5eb0 [ 748.001854] softirqs last enabled at (0): [<ffffffff8131330e>] copy_process+0x14ae/0x5eb0 [ 748.013431] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 748.001492] ---[ end trace a6fabd773d1c51ae ]--- Fix by destroying the send queue of a hairpin peer net device that is being removed/unbound, which returns the allocated ring buffer pages to the host. Fixes: 4d8fcf21 ("net/mlx5e: Avoid unbounded peer devices when unpairing TC hairpin rules") Signed-off-by:
Dima Chumak <dchumak@nvidia.com> Reviewed-by:
-
Huy Nguyen authored
Currently, IPsec feature is disabled because mlx5e_build_nic_netdev is required to be called after mlx5e_ipsec_init. This requirement is invalid as mlx5e_build_nic_netdev and mlx5e_ipsec_init initialize independent resources. Remove ipsec pointer check in mlx5e_build_nic_netdev so that the two functions can be called at any order. Fixes: 547eede0 ("net/mlx5e: IPSec, Innova IPSec offload infrastructure") Signed-off-by:
Huy Nguyen <huyn@nvidia.com> Reviewed-by:
Raed Salem <raeds@nvidia.com> Signed-off-by:
-
Vlad Buslov authored
Function mlx5e_rep_neigh_update() wasn't updated to accommodate rtnl lock removal from TC filter update path and properly handle concurrent encap entry insertion/deletion which can lead to following use-after-free: [23827.464923] ================================================================== [23827.469446] BUG: KASAN: use-after-free in mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.470971] Read of size 4 at addr ffff8881d132228c by task kworker/u20:6/21635 [23827.472251] [23827.472615] CPU: 9 PID: 21635 Comm: kworker/u20:6 Not tainted 5.13.0-rc3+ #5 [23827.473788] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [23827.475639] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [23827.476731] Call Trace: [23827.477260] dump_stack+0xbb/0x107 [23827.477906] print_address_description.constprop.0+0x18/0x140 [23827.478896] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.479879] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.480905] kasan_report.cold+0x7c/0xd8 [23827.481701] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.482744] kasan_check_range+0x145/0x1a0 [23827.493112] mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.494054] ? mlx5e_tc_tun_encap_info_equal_generic+0x140/0x140 [mlx5_core] [23827.495296] mlx5e_rep_neigh_update+0x41e/0x5e0 [mlx5_core] [23827.496338] ? mlx5e_rep_neigh_entry_release+0xb80/0xb80 [mlx5_core] [23827.497486] ? read_word_at_a_time+0xe/0x20 [23827.498250] ? strscpy+0xa0/0x2a0 [23827.498889] process_one_work+0x8ac/0x14e0 [23827.499638] ? lockdep_hardirqs_on_prepare+0x400/0x400 [23827.500537] ? pwq_dec_nr_in_flight+0x2c0/0x2c0 [23827.501359] ? rwlock_bug.part.0+0x90/0x90 [23827.502116] worker_thread+0x53b/0x1220 [23827.502831] ? process_one_work+0x14e0/0x14e0 [23827.503627] kthread+0x328/0x3f0 [23827.504254] ? _raw_spin_unlock_irq+0x24/0x40 [23827.505065] ? __kthread_bind_mask+0x90/0x90 [23827.505912] ret_from_fork+0x1f/0x30 [23827.506621] [23827.506987] Allocated by task 28248: [23827.507694] kasan_save_stack+0x1b/0x40 [23827.508476] __kasan_kmalloc+0x7c/0x90 [23827.509197] mlx5e_attach_encap+0xde1/0x1d40 [mlx5_core] [23827.510194] mlx5e_tc_add_fdb_flow+0x397/0xc40 [mlx5_core] [23827.511218] __mlx5e_add_fdb_flow+0x519/0xb30 [mlx5_core] [23827.512234] mlx5e_configure_flower+0x191c/0x4870 [mlx5_core] [23827.513298] tc_setup_cb_add+0x1d5/0x420 [23827.514023] fl_hw_replace_filter+0x382/0x6a0 [cls_flower] [23827.514975] fl_change+0x2ceb/0x4a51 [cls_flower] [23827.515821] tc_new_tfilter+0x89a/0x2070 [23827.516548] rtnetlink_rcv_msg+0x644/0x8c0 [23827.517300] netlink_rcv_skb+0x11d/0x340 [23827.518021] netlink_unicast+0x42b/0x700 [23827.518742] netlink_sendmsg+0x743/0xc20 [23827.519467] sock_sendmsg+0xb2/0xe0 [23827.520131] ____sys_sendmsg+0x590/0x770 [23827.520851] ___sys_sendmsg+0xd8/0x160 [23827.521552] __sys_sendmsg+0xb7/0x140 [23827.522238] do_syscall_64+0x3a/0x70 [23827.522907] entry_SYSCALL_64_after_hwframe+0x44/0xae [23827.523797] [23827.524163] Freed by task 25948: [23827.524780] kasan_save_stack+0x1b/0x40 [23827.525488] kasan_set_track+0x1c/0x30 [23827.526187] kasan_set_free_info+0x20/0x30 [23827.526968] __kasan_slab_free+0xed/0x130 [23827.527709] slab_free_freelist_hook+0xcf/0x1d0 [23827.528528] kmem_cache_free_bulk+0x33a/0x6e0 [23827.529317] kfree_rcu_work+0x55f/0xb70 [23827.530024] process_one_work+0x8ac/0x14e0 [23827.530770] worker_thread+0x53b/0x1220 [23827.531480] kthread+0x328/0x3f0 [23827.532114] ret_from_fork+0x1f/0x30 [23827.532785] [23827.533147] Last potentially related work creation: [23827.534007] kasan_save_stack+0x1b/0x40 [23827.534710] kasan_record_aux_stack+0xab/0xc0 [23827.535492] kvfree_call_rcu+0x31/0x7b0 [23827.536206] mlx5e_tc_del_fdb_flow+0x577/0xef0 [mlx5_core] [23827.537305] mlx5e_flow_put+0x49/0x80 [mlx5_core] [23827.538290] mlx5e_delete_flower+0x6d1/0xe60 [mlx5_core] [23827.539300] tc_setup_cb_destroy+0x18e/0x2f0 [23827.540144] fl_hw_destroy_filter+0x1d2/0x310 [cls_flower] [23827.541148] __fl_delete+0x4dc/0x660 [cls_flower] [23827.541985] fl_delete+0x97/0x160 [cls_flower] [23827.542782] tc_del_tfilter+0x7ab/0x13d0 [23827.543503] rtnetlink_rcv_msg+0x644/0x8c0 [23827.544257] netlink_rcv_skb+0x11d/0x340 [23827.544981] netlink_unicast+0x42b/0x700 [23827.545700] netlink_sendmsg+0x743/0xc20 [23827.546424] sock_sendmsg+0xb2/0xe0 [23827.547084] ____sys_sendmsg+0x590/0x770 [23827.547850] ___sys_sendmsg+0xd8/0x160 [23827.548606] __sys_sendmsg+0xb7/0x140 [23827.549303] do_syscall_64+0x3a/0x70 [23827.549969] entry_SYSCALL_64_after_hwframe+0x44/0xae [23827.550853] [23827.551217] The buggy address belongs to the object at ffff8881d1322200 [23827.551217] which belongs to the cache kmalloc-256 of size 256 [23827.553341] The buggy address is located 140 bytes inside of [23827.553341] 256-byte region [ffff8881d1322200, ffff8881d1322300) [23827.555747] The buggy address belongs to the page: [23827.556847] page:00000000898762aa refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d1320 [23827.558651] head:00000000898762aa order:2 compound_mapcount:0 compound_pincount:0 [23827.559961] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) [23827.561243] raw: 002ffff800010200 dead000000000100 dead000000000122 ffff888100042b40 [23827.562653] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [23827.564112] page dumped because: kasan: bad access detected [23827.565439] [23827.565932] Memory state around the buggy address: [23827.566917] ffff8881d1322180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [23827.568485] ffff8881d1322200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [23827.569818] >ffff8881d1322280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [23827.571143] ^ [23827.571879] ffff8881d1322300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [23827.573283] ffff8881d1322380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [23827.574654] ================================================================== Most of the necessary logic is already correctly implemented by mlx5e_get_next_valid_encap() helper that is used in neigh stats update handler. Make the handler generic by renaming it to mlx5e_get_next_matching_encap() and use callback to test whether flow is matching instead of hardcoded check for 'valid' flag value. Implement mlx5e_get_next_valid_encap() by calling mlx5e_get_next_matching_encap() with callback that tests encap MLX5_ENCAP_ENTRY_VALID flag. Implement new mlx5e_get_next_init_encap() helper by calling mlx5e_get_next_matching_encap() with callback that tests encap completion result to be non-error and use it in mlx5e_rep_neigh_update() to safely iterate over nhe->encap_list. Remove encap completion logic from mlx5e_rep_update_flows() since the encap entries passed to this function are already guaranteed to be properly initialized by similar code in mlx5e_get_next_init_encap(). Fixes: 2a1f1768 ("net/mlx5e: Refactor neigh update for concurrent execution") Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
-
Yang Li authored
When the code execute 'if (!priv->fs.arfs->wq)', the value of err is 0. So, we use -ENOMEM to indicate that the function create_singlethread_workqueue() return NULL. Clean up smatch warning: drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c:373 mlx5e_arfs_create_tables() warn: missing error code 'err'. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Fixes: f6755b80 ("net/mlx5e: Dynamic alloc arfs table for netdev when needed") Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
- 09 Jun, 2021 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-06-09 This series contains updates to ice driver only. Maciej informs the user when XDP is not supported due to the driver being in the 'safe mode' state. He also adds a parameter to Tx queue configuration to resolve an issue in configuring XDP queues as it cannot rely on using the number Tx or Rx queues. ==================== Signed-off-by: -
Marcelo Ricardo Leitner authored
This this the counterpart of 8aa7b526 ("openvswitch: handle DNAT tuple collision") for act_ct. From that commit changelog: """ With multiple DNAT rules it's possible that after destination translation the resulting tuples collide. ... Netfilter handles this case by allocating a null binding for SNAT at egress by default. Perform the same operation in openvswitch for DNAT if no explicit SNAT is requested by the user and allocate a null binding for SNAT for packets in the "original" direction. """ Fixes: 95219afb ("act_ct: support asymmetric conntrack") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Ido Schimmel authored
Cited commit started returning errors when notification info is not filled by the bridge driver, resulting in the following regression: # ip link add name br1 type bridge vlan_filtering 1 # bridge vlan add dev br1 vid 555 self pvid untagged RTNETLINK answers: Invalid argument As long as the bridge driver does not fill notification info for the bridge device itself, an empty notification should not be considered as an error. This is explained in commit 59ccaaaa ("bridge: dont send notification when skb->len == 0 in rtnl_bridge_notify"). Fix by removing the error and add a comment to avoid future bugs. Fixes: a8db57c1 ("rtnetlink: Fix missing error code in rtnl_bridge_notify()") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
-
David S. Miller authored
Merge tag 'mac80211-for-net-2021-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes berg says: ==================== A fair number of fixes: * fix more fallout from RTNL locking changes * fixes for some of the bugs found by syzbot * drop multicast fragments in mac80211 to align with the spec and what drivers are doing now * fix NULL-ptr deref in radiotap injection ==================== Signed-off-by:
-
Paolo Abeni authored
Kaustubh reported and diagnosed a panic in udp_lib_lookup(). The root cause is udp_abort() racing with close(). Both racing functions acquire the socket lock, but udp{v6}_destroy_sock() release it before performing destructive actions. We can't easily extend the socket lock scope to avoid the race, instead use the SOCK_DEAD flag to prevent udp_abort from doing any action when the critical race happens. Diagnosed-and-tested-by:Kaustubh Pandey <kapandey@codeaurora.org> Fixes: 5d77dca8 ("net: diag: support SOCK_DESTROY for UDP sockets") Signed-off-by:
-
Eric Dumazet authored
Both functions are known to be racy when reading inet_num as we do not want to grab locks for the common case the socket has been bound already. The race is resolved in inet_autobind() by reading again inet_num under the socket lock. syzbot reported: BUG: KCSAN: data-race in inet_send_prepare / udp_lib_get_port write to 0xffff88812cba150e of 2 bytes by task 24135 on cpu 0: udp_lib_get_port+0x4b2/0xe20 net/ipv4/udp.c:308 udp_v6_get_port+0x5e/0x70 net/ipv6/udp.c:89 inet_autobind net/ipv4/af_inet.c:183 [inline] inet_send_prepare+0xd0/0x210 net/ipv4/af_inet.c:807 inet6_sendmsg+0x29/0x80 net/ipv6/af_inet6.c:639 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490 __do_sys_sendmmsg net/socket.c:2519 [inline] __se_sys_sendmmsg net/socket.c:2516 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88812cba150e of 2 bytes by task 24132 on cpu 1: inet_send_prepare+0x21/0x210 net/ipv4/af_inet.c:806 inet6_sendmsg+0x29/0x80 net/ipv6/af_inet6.c:639 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490 __do_sys_sendmmsg net/socket.c:2519 [inline] __se_sys_sendmmsg net/socket.c:2516 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x9db4 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24132 Comm: syz-executor.2 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by:
-
Austin Kim authored
Several ethtool functions leave heap uncleared (potentially) by drivers. This will leave the unused portion of heap unchanged and might copy the full contents back to userspace. Signed-off-by:
Austin Kim <austindh.kim@gmail.com> Signed-off-by:
-
Maciej Fijalkowski authored
Commit ae15e0ba ("ice: Change number of XDP Tx queues to match number of Rx queues") tried to address the incorrect setting of XDP queue count that was based on the Tx queue count, whereas in theory we should provide the XDP queue per Rx queue. However, the routines that setup and destroy the set of Tx resources are still based on the vsi->num_txq. Ice supports the asynchronous Tx/Rx queue count, so for a setup where vsi->num_txq > vsi->num_rxq, ice_vsi_stop_tx_rings and ice_vsi_cfg_txqs will be accessing the vsi->xdp_rings out of the bounds. Parameterize two mentioned functions so they get the size of Tx resources array as the input. Fixes: ae15e0ba ("ice: Change number of XDP Tx queues to match number of Rx queues") Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by:
Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Maciej Fijalkowski authored
ice driver requires a programmable pipeline firmware package in order to have a support for advanced features. Otherwise, driver falls back to so called 'safe mode'. For that mode, ndo_bpf callback is not exposed and when user tries to load XDP program, the following happens: $ sudo ./xdp1 enp179s0f1 libbpf: Kernel error message: Underlying driver does not support XDP in native mode link set xdp fd failed which is sort of confusing, as there is a native XDP support, but not in the current mode. Improve the user experience by providing the specific ndo_bpf callback dedicated for safe mode which will make use of extack to explicitly let the user know that the DDP package is missing and that's the reason that the XDP can't be loaded onto interface currently. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Fixes: efc2214b ("ice: Add support for XDP") Signed-off-by:
-
Florian Westphal authored
The ip6tables rpfilter match has an extra check to skip packets with "::" source address. Extend this to ipv6 fib expression. Else ipv6 duplicate address detection packets will fail rpf route check -- lookup returns -ENETUNREACH. While at it, extend the prerouting check to also cover the ingress hook. Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1543 Fixes: f6d0cbcf ("netfilter: nf_tables: add fib expression") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
There is a bug report on netfilter.org bugzilla pointing to fib expression dropping ipv6 DAD packets. Add a test case that demonstrates this problem. Next patch excludes icmpv6 packets coming from any to linklocal. Signed-off-by:
-
