Skip to content

L
linux
Switch branch/tag
  1. 20 Jun, 2023 9 commits
    • Arnd Bergmann's avatar
      Merge tag 'qcom-dts-for-6.5' of... · 6db92533
      Arnd Bergmann authored 
      Merge tag 'qcom-dts-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm ARM32 DeviceTree updates for v6.5

NAND support on IPQ4019 boards is restored, after a faulty node rename.

On MSM8226 IMEM, PMU and RPM stats are introduced. The Huawei Watch
gains vibrator support.

On MSM8974, the LGE Nexus 5 gains vibrator support. The APQ8074
Dragonboard marks BLSP2 BAM controlled remotely, DSI panel, audio and
modem DSPs are enabled.

On SDX65 PCIe controller and PHY are introduced, to provide endpoint
functionality. This is enabled on the related MTP.

A range of DeviceTree cleanups are also included.

* tag 'qcom-dts-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits)
  ARM: dts: qcom: apq8074-dragonboard: enable DSI panel
  ARM: dts: qcom: apq8074-dragonboard: enable adsp and MSS
  ARM: dts: qcom: apq8074-dragonboard: Set DMA as remotely controlled
  ARM: dts: qcom: apq8026-huawei-sturgeon: Add vibrator
  ARM: dts: qcom: msm8226: Add IMEM node
  ARM: dts: qcom: msm8226: Add rpm-stats device node
  ARM: dts: qcom: msm8226: Add PMU node
  ARM: dts: qcom: sdx65-mtp: Enable PCIe EP
  ARM: dts: qcom: sdx65-mtp: Enable PCIe PHY
  ARM: dts: qcom: sdx65: Add support for PCIe EP
  ARM: dts: qcom: sdx65: Add support for PCIe PHY
  ARM: dts: qcom: msm8974: align WCNSS Bluetooth node name with bindings
  ARM: dts: qcom: apq8084: correct thermal sensor unit-address
  ARM: dts: qcom: msm8960-cdp: move regulator out of simple-bus
  ARM: dts: qcom: apq8060-dragonboard: move regulators out of simple-bus
  ARM: dts: qcom: ipq8064: align USB node names with bindings
  ARM: dts: qcom: ipq8064: correct LED node names
  ARM: dts: qcom: ipq8064: drop invalid GCC thermal-sensor unit-address
  ARM: dts: qcom: ipq8064: drop leading 0 from unit-address
  ARM: dts: qcom: msm8974: correct pronto unit-address
  ...

Link: https://lore.kernel.org/r/20230611010843.2482142-1-andersson@kernel.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      6db92533
    • Arnd Bergmann's avatar
      Merge tag 'qcom-arm64-for-6.5' of... · 60c2f542
      Arnd Bergmann authored 
      Merge tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm ARM64 DeviceTree updates for v6.5

This introduces the RDP442 and RDP433 reference devices on IPQ5332 and
IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574
are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is
added. Support for Acer Apire 1, built on the Snapdragon 7c platform is
introduced. Fxtec Pro1X on SM6115 is added.  Lastly long floating
support for SC8180X and the Lenovo Flex 5G, and the Primus reference
device, has been added.

On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described
above the RDP442 board on the prior. Download mode support and various
reserved-memory regions are also introduced on IPQ6018.
IPQ8074 gains another SPI controller.

On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog,
qfprom, SMEM and RPM are introduced. As are support for four new board,
mentioned above.

MSM8916 gains a range of structural improvements, to better suite the
various boards supported. Regulator constraints are corrected and their
states are adjusted to match reality (e.g. always-on regulators marked
as always-on). BQ Aquaris X5 gains support for front flash LED.

As mentioned above, MSM8939 support is introduced with support for
boards from Sony and Square.

MSM8953 gains DMA support in I2C masters.

MSM8996-based Sony Xperia boards gains description of their RGB
notification LED.

On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU,
AOSS, watchdog and missing low-speed controllers are added. On the Ride
platform UFS, USB and an i2c bus are enabled.

iommu properties are added to QSPI on both SC7180 and SC7280. LPASS
clocks are adjusted and MDP node cleaned up slightly, on SC7180. As
mentioned above, support for Acer Aspire 1 is introduced.

Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the
Primus reference device has been merged.

On SC8280XP ethernet is added and enabled on the automotive ride
platform. An SDC controller is introduced and enabled on the SC8280XP
CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB
SuperSpeed phy is added to the Type-C graph, to enable support for
orientation switching.

Fairphone 3 gains support for its notification LED.

On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains
support for flash LED and the RB3 (DB845c) board gains support for
bonded/dual DSI-mode, to allow 4k output.

On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY
are introduced. As mentioned above Fxtec Pro1X is introduced. On the
QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display,
CAN-bus and GPIO LEDs are introduced, fixed regulators are described and
the SD-card description is corrected.

Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5
gains SD-card support, camera regulators and GPIO line names sorted out.

SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5
II gains support for hardware video accelerator.

Crypto engine is introduced for SM8350 as well. The HDK gets the USB
Type-C graph described for Superspeed orientation switching and
DisplayPort output.

On SM8450 video clock controller and crypto engine are added, missing
opp levels are introduced and the USB Type-C graph is defined for
orientation switching and altmode.

SM8550 gains GPU and video clock controllers and missing opp levels are
added. The WCD9385 audio codec is added for the SM8550 MTP and on the
QRD PCIe, USB, audio display and flash LED are added.

* tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (195 commits)
  arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G
  arm64: dts: qcom: sc8180x: Introduce Primus
  arm64: dts: qcom: sc8180x: Add pmics
  arm64: dts: qcom: sc8180x: Add display and gpu nodes
  arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes
  arm64: dts: qcom: sc8180x: Add PCIe instances
  arm64: dts: qcom: sc8180x: Add QUPs
  arm64: dts: qcom: sc8180x: Add thermal zones
  arm64: dts: qcom: sc8180x: Add interconnects and lmh
  arm64: dts: qcom: Introduce the SC8180x platform
  arm64: dts: qcom: msm8916: Move aliases to boards
  arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec
  arm64: dts: qcom: msm8916/39: Clean up MDSS labels
  arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl
  arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN
  arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm
  arm64: dts: qcom: qrb4210-rb2: Enable USB node
  arm64: dts: qcom: sm6115: Add USB SS qmp phy node
  arm64: dts: qcom: ipq5332: add support for the RDP442 variant
  dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family
  ...

Link: https://lore.kernel.org/r/20230611004944.2481596-1-andersson@kernel.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      60c2f542
    • Arnd Bergmann's avatar
      Merge tag 'imx-dt64-6.5' of... · 70cdf5e2
      Arnd Bergmann authored 
      Merge tag 'imx-dt64-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX arm64 device tree for 6.5:

- New board support: i.MX8MM based Emtop SoM & Baseboard, NXP i.MX8MM EVKB
  board, i.MX8MP based Gateworks Venice gw7905-2x device.
- A series from Adam Ford to add Camera and Audio support for i.MX8M
  based Beacon boards.
- Add Audio output support for i.MX8MP TQMa8MPxL/MBa8MPxL board.
- Add HDMI and display support for imx8mm-evk and imx8mm-phg board.
- Add coresight trace devices support for i.MX8MP SoC.
- A couple of changes from Krzysztof Kozlowski to add missing cache
  properties.
- A couple of changes from Laurent Pinchart to add CSIS and ISI devices
  for i.MX8MP SoC.
- A series from Marek Vasut to add more devices for i.MX8MP, and enable
  SAI audio on i.MX8MP DHCOM PDK2 and PDK3.
- Correct GSC vdd_bat data size for Gateworks Venice devices.
- Add more device support for i.MX93, Watchdog, OCOTP, idle states, DDR
  performance monitor, etc.
- Small and random clean-ups and device node additions.

* tag 'imx-dt64-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits)
  arm64: dts: imx8mq: Pass address-cells/size-cells to mipi_dsi
  arm64: dts: imx8mq: Use 'dsi' as node name
  arm64: dts: imx8mp-venice-gw702x: fix GSC vdd_bat data size
  arm64: dts: imx8mq-tqma8mq-mba8mx: Remove invalid properties
  arm64: dts: imx8mq: Add missing pci property
  arm64: dts: imx8mq: Fix lcdif clocks
  arm64: dts: imx8mq: Fix lcdif compatible
  arm64: dts: imx8mp: don't initialize audio clocks from CCM node
  arm64: dts: imx8mm-venice: Fix GSC vdd_bat data size.
  arm64: dts: imx8mp: Add coresight trace components
  arm64: dts: imx93: add ddr performance monitor node
  arm64: dts: imx8mm-phg: Add display support
  arm64: dts: tqma8mqml: Add vcc supply to i2c eeproms
  arm64: dts: imx8mm-evk: Add HDMI support
  arm64: dts: imx8mn-var-som-symphony: adapt FEC pinctrl for SOMs with onboard PHY
  arm64: dts: imx8mn-var-som: add 20ms delay to ethernet regulator enable
  arm64: dts: imx8mp-msc-sm2s: Add sound card
  arm64: dts: imx8mn-beacon: Migrate sound card to simple-audio-card
  arm64: dts: imx8mp-beacon-kit: Enable WM8962 Audio CODEC
  arm64: dts: imx93: add fsl,stop-mode property to support WOL
  ...

Link: https://lore.kernel.org/r/20230610072530.418847-3-shawnguo@kernel.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      70cdf5e2
    • Arnd Bergmann's avatar
      Merge tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt · f50a4e59
      Arnd Bergmann authored 
      i.MX ARM device tree for 6.5:

- New board support: Marantec Maveo Box.
- Add HDMI support for TQMa6x/MBa6 board.
- A series from Andrew Lunn to add phy-mode and fixed links for Ethernet
  devices on imx51, imx6qdl and vf610.
- A bunch of changes from Fabio Estevam to clean up deprecated and
  invalid properies, fix up node names to remove dt-schema warnings.
- A series of maintenance updates for Protonic Holland boards, mostly
  on the USB subsystem configuration, thermal zones, and the naming of
  GPIO keys.
- Update dma-apbh device node name to remove dtbs_check warnings.
- Remove invalid nodes from fan-controller for a couple of Gateworks
  boards.
- Small random updates and clean-ups on various boards.

* tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits)
  ARM: dts: imx6qdl: vicut1: rename power to power-button
  ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings
  ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG port
  ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port
  ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port
  ARM: dts: imx6dl: prtmvt: fix different USB related warnings
  ARM: dts: imx6dl: alti6p: fix different USB related warnings
  ARM: dts: imx6dl: vicut1: Address USB related warnings
  ARM: dts: imx6dl: Add trip points to thermal zones on several devices
  ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node
  ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes
  ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC
  ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion
  ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65
  ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97
  ARM: dts: imx: Use 'eeprom' as node name
  ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name
  ARM: dts: imx: Use 'pmic' as node name
  ARM: dts: imx6: Use the mux- prefix
  ARM: dts: imx7d-sdb: Allow UHS modes
  ...

Link: https://lore.kernel.org/r/20230610072530.418847-2-shawnguo@kernel.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      f50a4e59
    • Arnd Bergmann's avatar
      Merge tag 'imx-bindings-6.5' of... · 32302719
      Arnd Bergmann authored 
      Merge tag 'imx-bindings-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX dt-bindings for 6.5:

- Add vendor prefix for Emtop
- Compatibles for Marantec Maveo Box, i.MX8MM-EVKB and GW7905-2x board.
- Replace tab indent with spaces in fsl.yaml.

* tag 'imx-bindings-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: Add Gateworks i.MX8M GW7905-2x board
  dt-bindings: arm: fsl: Fix syntax error
  dt-bindings: vendor-prefixes: Add Emtop
  dt-bindings: arm: fsl: Add Emtop SoM & Baseboard
  dt-bindings: arm: fsl: Add i.MX8MM-EVKB
  dt-bindings: arm: fsl: Add Marantec maveo box as a DHCOR i.MX6ULL SoM based board

Link: https://lore.kernel.org/r/20230610072530.418847-1-shawnguo@kernel.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      32302719
    • Arnd Bergmann's avatar
      Merge tag 'sunxi-dt-for-6.5-1' of... · 52d38cff
      Arnd Bergmann authored 
      Merge tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt

- fix DCLK clock names
- new board ICnova A20 ADB4006
- add D1 SPI node
- add bluetooth node for chip board
- add extra mmc2 pinmux to sun5i
- add axp209 iio-hwmon node

* tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: axp209: Add iio-hwmon node for internal temperature
  ARM: dts: sun5i: Add port E pinmux settings for mmc2
  ARM: dts: sun5i: chip: Enable bluetooth
  riscv: dts: allwinner: d1: Add SPI controllers node
  arm: dts: sunxi: Add ICnova A20 ADB4006 board
  dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding
  ARM: dts: sunxi: rename tcon's clock output

Link: https://lore.kernel.org/r/20230609210452.GA17638@jernej-laptopSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      52d38cff
    • Arnd Bergmann's avatar
      Merge tag 'tegra-for-6.5-arm64-dt' of... · a9c7f8d0
      Arnd Bergmann authored 
      Merge tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt

arm64: tegra: Device tree changes for v6.5-rc1

This introduces support for the IGX Orin and Jetson Orin Nano devices
and enables various additional features on the Jetson AGX Orin and
Jetson Orin NX. This also enables some basic thermal support to prevent
the devices from overheating.

Support for the GPU on the Google Pixel C is enabled and various minor
issues are fixed and cleaned up.

* tag 'tegra-for-6.5-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Enable thermal support on Jetson Orin Nano
  arm64: tegra: Enable thermal support on Jetson Orin NX
  arm64: tegra: Enable thermal support on Jetson AGX Orin
  arm64: tegra: Add Tegra234 thermal support
  arm64: tegra: Add a few blank lines for better readability
  arm64: tegra: Sort properties more logically
  arm64: tegra: Enable GPU on Smaug
  arm64: tegra: Add GPU power rail regulator on Smaug
  arm64: tegra: Update USB phy-name for Jetson Orin NX
  arm64: tegra: Enable USB device for Jetson AGX Orin
  arm64: tegra: Add Tegra234 pin controllers
  arm64: tegra: Support Jetson Orin Nano Developer Kit
  arm64: tegra: Add missing cache properties on Tegra210
  arm64: tegra: Fix PCIe regulator for Orin Jetson AGX
  arm64: tegra: Add CPU OPP tables and interconnects property
  arm64: tegra: Add support for IGX Orin

Link: https://lore.kernel.org/r/20230609193620.2275240-6-thierry.reding@gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      a9c7f8d0
    • Arnd Bergmann's avatar
      Merge tag 'tegra-for-6.5-dt-bindings' of... · 79e47607
      Arnd Bergmann authored 
      Merge tag 'tegra-for-6.5-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt

dt-bindings: Changes for v6.5-rc1

Several new modules and devices are documented and fixes incorporated
for the Tegra234 GPIO controller pin mappings as well as the possible
Tegra XUDC PHY connections.

* tag 'tegra-for-6.5-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: tegra: Document Jetson Orin Nano Developer Kit
  dt-bindings: tegra: Document Jetson Orin Nano
  dt-bindings: gpio: Remove FSI domain ports on Tegra234
  dt-bindings: usb: tegra-xudc: Remove extraneous PHYs
  dt-bindings: tegra: Add ICC IDs for dummy memory clients
  dt-bindings: tegra: Document compatible for IGX

Link: https://lore.kernel.org/r/20230609193620.2275240-3-thierry.reding@gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      79e47607
    • Arnd Bergmann's avatar
      Merge tag 'stm32-dt-for-v6.5-1' of... · b1062d19
      Arnd Bergmann authored 
      Merge tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt

STM32 DT for v6.5, round 1

Highlights:
----------

- MCU/MPU:
  - Replace deprecated st,hw-flow-ctrl by uart-has-rtscts.
  - Fix LTDC/DSI warnings.

- MPU:
  - STMP32MP15:
    - Add OTP part number and Vrefint calibration in bsec.
    - M4 hold management updated. As SMC call is deprecated,
      the service is moved on a SCMI service.
    - Add ADC internal channels (VREFINT/VDDCORE).

  - ST:
    - Enable ADC1&2 on STM32MP15 DKx boards.
    - Adopt generic IIO bindings on STM32MP157C ED1
    - Add supplies for OV5640 in STM32MP157C EV1
      to fix yaml validation.
    - Fix i2s bindings to match with the YAML validation (DKx boards).

  - DH:
    - Rearrange MAC EEPROM.
    - Rename AV96 sound card.
    - Adopt generic IIo bindings.
    - Fix audio routing.

  -PHYTEC:
    - Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM.
      This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC,
      up to 16 MB QSPI and up to 128 GB NAND flash.

* tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits)
  ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx
  ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2
  ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1
  ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems
  ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench
  ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc
  ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon
  ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1
  ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards
  ARM: dts: stm32: add vrefint support to adc2 on stm32mp15
  ARM: dts: stm32: add vrefint calibration on stm32mp15
  ARM: dts: stm32: add adc internal channels to stm32mp15
  ARM: dts: stm32: fix ltdc warnings in stm32mp15 boards
  ARM: dts: stm32: fix dsi warnings on stm32mp15 boards
  dt-bindings: display: st,stm32-dsi: Remove unnecessary fields
  ARM: dts: stm32: fix warnings on stm32f469-disco board
  ARM: dts: stm32: Shorten the AV96 HDMI sound card name
  ARM: dts: stm32: fix m4_rproc references to use SCMI for stm32mp15
  ARM: dts: stm32: Update Cortex-M4 reset declarations on stm32mp15
  ARM: dts: stm32: add STM32MP1-based Phytec board
  ...

Link: https://lore.kernel.org/r/08d711de-bb6d-a976-735b-5e18b19818ea@foss.st.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      b1062d19
  3. 09 Jun, 2023 27 commits
  5. 08 Jun, 2023 2 commits
  7. 07 Jun, 2023 2 commits
    • Tony Lindgren's avatar
      arm64: dts: hisilicon: Unify pinctrl-single pin group nodes · 35e6bcd1
      Tony Lindgren authored 
      We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.

Let's also correct the pinctrl controller #size-cells to 0 while at it.

Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarWei Xu <xuwei5@hisilicon.com>
      35e6bcd1
    • Tony Lindgren's avatar
      ARM: dts: hisilicon: Unify pinctrl-single pin group nodes · 709f6754
      Tony Lindgren authored 
      We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.

Let's also correct the pinctrl controller #size-cells to 0 while at it
and drop unnecessary ranges property.

Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarWei Xu <xuwei5@hisilicon.com>
      709f6754
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7