- 06 Feb, 2021 29 commits
-
-
Jakub Kicinski authored
Huazhong Tan says: ==================== net: hns3: updates for -next This series adds some code optimizations and compatibility handlings for the HNS3 ethernet driver. change log: V2: refactor #2 as Jukub Kicinski reported and remove the part about RSS size which will not be different in different hw. updates netdev->max_mtu as well in #4 reported by Jakub Kicinski. previous version: V1: https://patchwork.kernel.org/project/netdevbpf/cover/1612269593-18691-1-git-send-email-tanhuazhong@huawei.com/ ==================== Link: https://lore.kernel.org/r/1612513969-9278-1-git-send-email-tanhuazhong@huawei.comSigned-off-by:Jakub Kicinski <kuba@kernel.org>
-
Guangbin Huang authored
The max qset number is a fixed value now and it is defined by a macro. In order to support other value in different kinds of device, it is better to use specification queried from firmware to replace macro. Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Guangbin Huang authored
In order to add a method to check the specification of max tm rate for debugging, function hns3_dbg_dev_specs() adds this value print. Signed-off-by:
-
Yufeng Mo authored
Since the newer hardware may supports different frame size, so add support to obtain the capability from the firmware instead of the fixed value. Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
-
GuoJia Liao authored
When update the TC info for NIC, there are some differences between PF and VF. Currently, four "vport->vport_id" are used to distinguish PF or VF. So merge them into one to improve readability and maintainability of code. Signed-off-by:
GuoJia Liao <liaoguojia@huawei.com> Signed-off-by:
-
Guangbin Huang authored
As RSS indirection table size may be different in different hardware. Instead of using macro, this value is better to use device specification which querying from firmware. BTW, RSS indirection table should be allocated by the queried size instead the static array. .get_rss_indir_size in struct hnae3_ae_ops is not used now, so remove it as well. Signed-off-by:
-
Jian Shen authored
To improve the compatibility of firmware for driver, help firmware to deal with different api commands, add api capability bits when initialize the command queue. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Misc. updates for tests & lock annotation Here are two fixes we've collected in the mptcp tree. Patch 1 refactors a MPTCP selftest script to allow running a subset of the tests. Patch 2 adds some locking & might_sleep assertations. ==================== Link: https://lore.kernel.org/r/20210204232330.202441-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Florian Westphal authored
Add a few assertions to make sure functions are called with the needed locks held. Two functions gain might_sleep annotations because they contain conditional calls to functions that sleep. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Geliang Tang authored
Since the mptcp_join script is becoming too big, this patch splits it into several smaller chunks, each of them has been defined in a function as a individual test group for several related testcases. Using bash getopts function to parse command line arguments, and invoke each function to do the individual test group. Here are all the arguments: -f subflows_tests -s signal_address_tests -l link_failure_tests -t add_addr_timeout_tests -r remove_tests -a add_tests -6 ipv6_tests -4 v4mapped_tests -b backup_tests -p add_addr_ports_tests -c syncookies_tests -h help Run mptcp_join.sh with no argument will execute all testcases. Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Russell King says: ==================== dpaa2: add 1000base-X support This patch series adds 1000base-X support to pcs-lynx and DPAA2, allowing runtime switching between SGMII and 1000base-X. This is a pre-requisit for SFP module support on the SolidRun ComExpress 7. v2: updated with Ioana's r-b's, and comment on backplane support ==================== Link: https://lore.kernel.org/r/20210205103859.GH1463@shell.armlinux.org.ukSigned-off-by:
-
Russell King authored
Add support for backplane link mode, which is, according to discussions with NXP earlier in the year, is a mode where the OS (Linux) is able to manage the PCS and Serdes itself. This commit prepares the ground work for allowing 1G fiber connections to be used with DPAA2 on the SolidRun CEX7 platforms. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King authored
Now that pcs-lynx supports 1000BASE-X, add support for this interface mode to dpaa2-mac. pcs-lynx can be switched at runtime between SGMII and 1000BASE-X mode, so allow dpaa2-mac to switch between these as well. This commit prepares the ground work for allowing 1G fiber connections to be used with DPAA2 on the SolidRun CEX7 platforms. Reviewed-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Russell King authored
Add support for 1000BASE-X to pcs-lynx for the LX2160A. This commit prepares the ground work for allowing 1G fiber connections to be used with DPAA2 on the SolidRun CEX7 platforms. Reviewed-by:
-
Emil Renner Berthing authored
This converts the driver to use the new tasklet API introduced in commit 12cc923f ("tasklet: Introduce new initialization API") The new API changes the argument passed to callback functions, but fortunately it is unused so it is straight forward to use DECLARE_TASKLET rather than DECLARE_TASLKLET_OLD. Signed-off-by:
Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20210204173947.92884-1-kernel@esmil.dkSigned-off-by:
-
Jakub Kicinski authored
Kevin Hao says: ==================== net: Avoid the memory waste in some Ethernet drivers In the current implementation of napi_alloc_frag(), it doesn't have any align guarantee for the returned buffer address. We would have to use some ugly workarounds to make sure that we can get a align buffer address for some Ethernet drivers. This patch series tries to introduce some helper functions to make sure that an align buffer is returned. Then we can drop the ugly workarounds and avoid the unnecessary memory waste. ==================== Link: https://lore.kernel.org/r/20210204105638.1584-1-haokexin@gmail.comSigned-off-by:
-
Kevin Hao authored
The napi_alloc_frag_align() will guarantee that a correctly align buffer address is returned. So use this function to simplify the buffer alloc and avoid the unnecessary memory waste. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Reviewed-by:
-
Kevin Hao authored
The napi_alloc_frag_align() will guarantee that a correctly align buffer address is returned. So use this function to simplify the buffer alloc and avoid the unnecessary memory waste. Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
-
Kevin Hao authored
In the current implementation of {netdev,napi}_alloc_frag(), it doesn't have any align guarantee for the returned buffer address, But for some hardwares they do require the DMA buffer to be aligned correctly, so we would have to use some workarounds like below if the buffers allocated by the {netdev,napi}_alloc_frag() are used by these hardwares for DMA. buf = napi_alloc_frag(really_needed_size + align); buf = PTR_ALIGN(buf, align); These codes seems ugly and would waste a lot of memories if the buffers are used in a network driver for the TX/RX. We have added the align support for the page_frag functions, so add the corresponding {netdev,napi}_frag functions. Signed-off-by:Alexander Duyck <alexanderduyck@fb.com> Signed-off-by:
-
Kevin Hao authored
In the current implementation of page_frag_alloc(), it doesn't have any align guarantee for the returned buffer address. But for some hardwares they do require the DMA buffer to be aligned correctly, so we would have to use some workarounds like below if the buffers allocated by the page_frag_alloc() are used by these hardwares for DMA. buf = page_frag_alloc(really_needed_size + align); buf = PTR_ALIGN(buf, align); These codes seems ugly and would waste a lot of memories if the buffers are used in a network driver for the TX/RX. So introduce page_frag_alloc_align() to make sure that an aligned buffer address is returned. Signed-off-by:Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
-
Colin Ian King authored
There is a spelling mistake in the function name alloc_channles_and_rings. Fix this by renaming it to alloc_channels_and_rings. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210204094944.51460-1-colin.king@canonical.comSigned-off-by:
-
Loic Poulain authored
When device side MTU is larger than host side MTU, the packets (typically rmnet packets) are split over multiple MHI transfers. In that case, fragments must be re-aggregated to recover the packet before forwarding to upper layer. A fragmented packet result in -EOVERFLOW MHI transaction status for each of its fragments, except the final one. Such transfer was previously considered as error and fragments were simply dropped. This change adds re-aggregation mechanism using skb chaining, via skb frag_list. A warning (once) is printed since this behavior usually comes from a misconfiguration of the device (e.g. modem MTU). Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Acked-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/1612428002-12333-1-git-send-email-loic.poulain@linaro.orgSigned-off-by:
-
Loic Poulain authored
There is no guarantee that rmnet rx_handler is only fed with linear skbs, but current rmnet implementation does not check that, leading to crash in case of non linear skbs processed as linear ones. Fix that by ensuring skb linearization before processing. Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Link: https://lore.kernel.org/r/1612428002-12333-2-git-send-email-loic.poulain@linaro.orgSigned-off-by:
-
Zheng Yongjun authored
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20210204073950.18372-1-zhengyongjun3@huawei.comSigned-off-by:
-
Zheng Yongjun authored
When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF. Signed-off-by:
-
Xu Wang authored
Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)). net/bridge/br_multicast.c:1246:9-16: WARNING: ERR_CAST can be used with mp Generated by: scripts/coccinelle/api/err_cast.cocci Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20210204070549.83636-1-vulab@iscas.ac.cnSigned-off-by:
-
Lorenzo Bianconi authored
Align netdevice statistics when the device is running in XDP mode to other upstream drivers. In particular report to user-space rx packets even if they are not forwarded to the networking stack (XDP_PASS) but if they are redirected (XDP_REDIRECT), dropped (XDP_DROP) or sent back using the same interface (XDP_TX). This patch allows the system administrator to verify the device is receiving data correctly. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/a457cb17dd9c58c116d64ee34c354b2e89c0ff8f.1612375372.git.lorenzo@kernel.orgSigned-off-by:
-
Jiapeng Chong authored
Fix the following coccicheck warnings: ./drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c:1651:36-38: WARNING !A || A && B is equivalent to !A || B. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by:
-
Jakub Kicinski authored
Merge tag 'wireless-drivers-next-2021-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.12 First set of patches for v5.12. A smaller pull request this time, biggest feature being a better key handling for ath9k. And of course the usual fixes and cleanups all over. Major changes: ath9k * more robust encryption key cache management brcmfmac * support BCM4365E with 43666 ChipCommon chip ID * tag 'wireless-drivers-next-2021-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (35 commits) iwl4965: do not process non-QOS frames on txq->sched_retry path mt7601u: process tx URBs with status EPROTO properly wlcore: Fix command execute failure 19 for wl12xx mt7601u: use ieee80211_rx_list to pass frames to the network stack as a batch rtw88: 8723de: adjust the LTR setting rtlwifi: rtl8821ae: fix bool comparison in expressions rtlwifi: rtl8192se: fix bool comparison in expressions rtlwifi: rtl8188ee: fix bool comparison in expressions rtlwifi: rtl8192c-common: fix bool comparison in expressions rtlwifi: rtl_pci: fix bool comparison in expressions wlcore: Downgrade exceeded max RX BA sessions to debug wilc1000: use flexible-array member instead of zero-length array brcmfmac: clear EAP/association status bits on linkdown events brcmfmac: Delete useless kfree code qtnfmac_pcie: Use module_pci_driver mt7601u: check the status of device in calibration mt7601u: process URBs in status EPROTO properly brcmfmac: support BCM4365E with 43666 ChipCommon chip ID wilc1000: fix spelling mistake in Kconfig "devision" -> "division" mwifiex: pcie: Drop bogus __refdata annotation ... ==================== Link: https://lore.kernel.org/r/20210205161901.C7F83C433ED@smtp.codeaurora.orgSigned-off-by:
-
- 05 Feb, 2021 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-02-03 This series contains updates to igc, igb, e1000e, and e1000 drivers. Sasha adds counting of good transmit packets and reporting of NVM version and gPHY version in ethtool firmware version. Replaces the use of strlcpy to the preferred strscpy. Fixes a typo that caused the wrong register to be output. He also removes an unused function pointer, some unneeded defines, and a non-applicable comment. All changes for igc. Gal Hammer fixes a typo which caused the RDBAL register values to be shown instead of TDBAL for igb. Nick Lowe enables RSS support for i211 devices for igb. Tom Rix fixes checkpatch warning by removing h from printk format specifier for igb. Kaixu Xia removes setting of a variable that is overwritten before next use for e1000e. Sudip Mukherjee removes an unneeded assignment for e1000. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: e1000: drop unneeded assignment in e1000_set_itr() e1000e: remove the redundant value assignment in e1000_update_nvm_checksum_spt igb: remove h from printk format specifier igb: Enable RSS for Intel I211 Ethernet Controller igb: fix TDBAL register show incorrect value igc: Fix TDBAL register show incorrect value igc: Remove unused FUNC_1 mask igc: Remove unused local receiver mask igc: Prefer strscpy over strlcpy igc: Expose the gPHY firmware version igc: Expose the NVM version igc: Add Host Good Packets Transmitted Count igc: Remove MULR mask define igc: Remove igc_set_fw_version comment igc: Clean up nvm_operations structure ==================== Link: https://lore.kernel.org/r/20210204004259.3662059-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Andrea Parri says: ==================== Amend "hv_netvsc: Copy packets sent by Hyper-V out of the receive buffer" Patch #2 also addresses the Smatch complaint reported here: https://lkml.kernel.org/r/YBp2oVIdMe+G%2FliJ@mwanda/ ==================== Link: https://lore.kernel.org/r/20210203113513.558864-1-parri.andrea@gmail.comSigned-off-by:
-
Andrea Parri (Microsoft) authored
Fix the typo. Signed-off-by:
Andrea Parri (Microsoft) <parri.andrea@gmail.com> Fixes: 0ba35fe9 ("hv_netvsc: Copy packets sent by Hyper-V out of the receive buffer") Signed-off-by:
-
Andrea Parri (Microsoft) authored
The recv_buf buffers are allocated in netvsc_device_add(). Later in netvsc_init_buf() the response to NVSP_MSG1_TYPE_SEND_RECV_BUF allows the host to set up a recv_section_size that could be bigger than the (default) value used for that allocation. The host-controlled value could be used by a malicious host to bypass the check on the packet's length in netvsc_receive() and hence to overflow the recv_buf buffer. Move the allocation of the recv_buf buffers into netvsc_init_but(). Reported-by:
Juan Vazquez <juvazq@microsoft.com> Signed-off-by:
-
Jakub Kicinski authored
Hayes Wang says: ==================== r8152: adjust flow for power cut The two patches are used to adjust the flow about resuming from the state of power cut. For the purpose, some functions have to be updated first. ==================== Link: https://lore.kernel.org/r/1394712342-15778-398-Taiwan-albertk@realtek.comSigned-off-by:
-
Hayes Wang authored
For runtime resuming, the RTL8153B may be resumed from the state of power cut, when enabling the feature of UPS. Then, the PHY would be reset, so it is necessary to be initailized again. Besides, the USB_U1U2_TIMER also has to be set again, so I move it from r8153b_init() to r8153b_hw_phy_cfg(). Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Hayes Wang authored
Replace r8153_patch_request() with rtl_phy_patch_request(). Replace r8153_pre_ram_code() with rtl_pre_ram_code(). Replace r8153_post_ram_code() with rtl_post_ram_code(). Add rtl_patch_key_set(). The new functions have an additional parameter. It is used to wait the patch request command finished. When the PHY is resumed from the state of power cut, the PHY is at a safe mode and the OCP_PHY_PATCH_STAT wouldn't be updated. For this situation, it is safe to set patch request command without waiting OCP_PHY_PATCH_STAT. Signed-off-by:
-
Tobias Waldekranz authored
On read, master should send 31 MSB of the register (only even values are ever used), followed by a 1 to indicate read. Then, reading two bytes, the device will output the register's value. On write, master sends 31 MSB of the register, followed by a 0 to indicate write, followed by two bytes containing the register value. Flexibilis' documentation (version 1.3) specifies the opposite polarity (#read/write), but the scope indicates that it is, in fact, read/#write. Signed-off-by:
Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by:
George McCollister <george.mccollister@gmail.com> Link: https://lore.kernel.org/r/20210202191645.439-1-tobias@waldekranz.comSigned-off-by:
-
Vladimir Oltean authored
The flow steering struct ethtool_flow_ext::data field is __be32, so when the CFP code needs to check the VLAN egress tagging attribute in bit 0, it does this in CPU native endianness. So logically, the endianness conversion is set up the other way around, although in practice the same result is produced. Gets rid of build warning: warning: cast from restricted __be32 warning: incorrect type in argument 1 (different base types) expected unsigned int [usertype] val got restricted __be32 warning: cast from restricted __be32 warning: cast from restricted __be32 warning: cast from restricted __be32 warning: cast from restricted __be32 warning: restricted __be32 degrades to integer Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210203193918.2236994-1-olteanv@gmail.comSigned-off-by:
-
Bhaskar Chowdhury authored
s/initialsation/initialisation/ s/specifiing/specifying/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210204031648.27300-1-unixbhaskar@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Leon Romanovsky says: ==================== Fix W=1 compilation warnings in net/* folder Changelog: v2: * Patch 3: Added missing include file. v1: https://lore.kernel.org/lkml/20210203101612.4004322-1-leon@kernel.org * Removed Fixes lines. * Changed target from net to be net-next. * Patch 1: Moved function declaration to be outside config instead games with if/endif. * Patch 3: Moved declarations to new header file. v0: https://lore.kernel.org/lkml/20210202135544.3262383-1-leon@kernel.org ==================== Link: https://lore.kernel.org/r/20210203135112.4083711-1-leon@kernel.orgSigned-off-by:
-
