- 23 Apr, 2019 7 commits
-
-
Xin Long authored
sk_forward_alloc's updating is also done on rx path, but to be consistent we change to use sk_mem_charge() in sctp_skb_set_owner_r(). In sctp_eat_data(), it's not enough to check sctp_memory_pressure only, which doesn't work for mem_cgroup_sockets_enabled, so we change to use sk_under_memory_pressure(). When it's under memory pressure, sk_mem_reclaim() and sk_rmem_schedule() should be called on both RENEGE or CHUNK DELIVERY path exit the memory pressure status as soon as possible. Note that sk_rmem_schedule() is using datalen to make things easy there. Reported-by:
Matteo Croce <mcroce@redhat.com> Tested-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> CVE-2019-3874 (backported from commit 9dde27de linux-next) [tyhicks: Backport to 4.4: - SCTP_PAD4() was WORD_ROUND() in 4.4. It was later renamed in commit e2f036a9 ("sctp: rename WORD_TRUNC/ROUND macros").] Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Acked-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
-
Xin Long authored
Now when sending packets, sk_mem_charge() and sk_mem_uncharge() have been used to set sk_forward_alloc. We just need to call sk_wmem_schedule() to check if the allocated should be raised, and call sk_mem_reclaim() to check if the allocated should be reduced when it's under memory pressure. If sk_wmem_schedule() returns false, which means no memory is allowed to allocate, it will block and wait for memory to become available. Note different from tcp, sctp wait_for_buf happens before allocating any skb, so memory accounting check is done with the whole msg_len before it too. Reported-by:
-
Xin Long authored
sk->sk_wmem_queued is used to count the size of chunks in out queue while sk->sk_wmem_alloc is for counting the size of chunks has been sent. sctp is increasing both of them before enqueuing the chunks, and using sk->sk_wmem_alloc to check for writable space. However, sk_wmem_alloc is also increased by 1 for the skb allocked for sending in sctp_packet_transmit() but it will not wake up the waiters when sk_wmem_alloc is decreased in this skb's destructor. If msg size is equal to sk_sndbuf and sendmsg is waiting for sndbuf, the check 'msg_len <= sctp_wspace(asoc)' in sctp_wait_for_sndbuf() will keep waiting if there's a skb allocked in sctp_packet_transmit, and later even if this skb got freed, the waiting thread will never get waked up. This issue has been there since very beginning, so we change to use sk->sk_wmem_queued to check for writable space as sk_wmem_queued is not increased for the skb allocked for sending, also as TCP does. SOCK_SNDBUF_LOCK check is also removed here as it's for tx buf auto tuning which I will add in another patch. Signed-off-by:
-
Xin Long authored
Now when reneging events in sctp_ulpq_renege(), the variable freed could be increased by a __u16 value twice while freed is of __u16 type. It means freed may overflow at the second addition. This patch is to fix it by using __u32 type for 'freed', while at it, also to remove 'if (chunk)' check, as all renege commands are generated in sctp_eat_data and it can't be NULL. Reported-by:
-
Naveen N. Rao authored
BugLink: https://bugs.launchpad.net/bugs/1812809 Add powerpc support for the recently added kprobe args tests. Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Shuah Khan (Samsung OSG) <shuah@kernel.org> (cherry picked from commit 9855c462) Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by:
-
Alex Williamson authored
Memory backed DMA mappings are accounted against a user's locked memory limit, including multiple mappings of the same memory. This accounting bounds the number of such mappings that a user can create. However, DMA mappings that are not backed by memory, such as DMA mappings of device MMIO via mmaps, do not make use of page pinning and therefore do not count against the user's locked memory limit. These mappings still consume memory, but the memory is not well associated to the process for the purpose of oom killing a task. To add bounding on this use case, we introduce a limit to the total number of concurrent DMA mappings that a user is allowed to create. This limit is exposed as a tunable module option where the default value of 64K is expected to be well in excess of any reasonable use case (a large virtual machine configuration would typically only make use of tens of concurrent mappings). This fixes CVE-2019-3882. Reviewed-by:
Eric Auger <eric.auger@redhat.com> Tested-by:
Peter Xu <peterx@redhat.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> CVE-2019-3882 (backported from commit 49285593) [tyhicks: Backport to 4.4: - Minor context differences due to missing blocking notifier from commit c086de81 ("vfio iommu: Add blocking notifier to notify DMA_UNMAP") - vfio_dma_do_map() doesn't yet have an out_unlock label which was added in commit 8f0d5bb9 ("vfio iommu type1: Add task structure to vfio_dma")] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Arvind Sankar authored
BugLink: https://bugs.launchpad.net/bugs/1818490 The runtime_suspend device callbacks are not supposed to save configuration state or change the power state. Commit fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") changed the driver to not save configuration state during runtime suspend, however the driver callback still put the device into a low-power state. This causes a warning in the pci pm core and results in pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend. Fix this by not changing the power state either, leaving that to pci pm core, and make the same change for suspend callback as well. Also move a couple of defines into the appropriate header file instead of inline in the .c file. Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") Signed-off-by:
Arvind Sankar <niveditas98@gmail.com> Reviewed-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> (cherry picked from commit dabb8338) Signed-off-by:
You-Sheng Yang <vicamo.yang@canonical.com> Acked-by:
AceLan Kao <acelan.kao@canonical.com> Acked-by:
-
- 15 Apr, 2019 3 commits
-
-
Peng Hao authored
BugLink: https://bugs.launchpad.net/bugs/1822821 Inside a nested guest, access to hardware can be slow enough that tsc_read_refs always return ULLONG_MAX, causing tsc_refine_calibration_work to be called periodically and the nested guest to spend a lot of time reading the ACPI timer. However, if the TSC frequency is available from the pvclock page, we can just set X86_FEATURE_TSC_KNOWN_FREQ and avoid the recalibration. 'refine' operation. Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Peng Hao <peng.hao2@zte.com.cn> [Commit message rewritten. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit e10f7805) Signed-off-by:
Heitor R. Alves de Siqueira <halves@canonical.com> Acked-by:
-
Bin Gao authored
BugLink: https://bugs.launchpad.net/bugs/1822821 The X86_FEATURE_TSC_RELIABLE flag in Linux kernel implies both reliable (at runtime) and trustable (at calibration). But reliable running and trustable calibration independent of each other. Add a new flag X86_FEATURE_TSC_KNOWN_FREQ, which denotes that the frequency is known (via MSR/CPUID). This flag is only meant to skip the long term calibration on systems which have a known frequency. Add X86_FEATURE_TSC_KNOWN_FREQ to the skip the delayed calibration and leave X86_FEATURE_TSC_RELIABLE in place. After converting the existing users of X86_FEATURE_TSC_RELIABLE to use either both flags or just X86_FEATURE_TSC_KNOWN_FREQ we can seperate the functionality. Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Bin Gao <bin.gao@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1479241644-234277-2-git-send-email-bin.gao@linux.intel.comSigned-off-by:
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1822579 If the call to btrfs_qgroup_reserve_data() failed, we were leaking an extent map structure. The failure can happen either due to an -ENOMEM condition or, when quotas are enabled, due to -EDQUOT for example. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> (backported from commit be2d253c) Signed-off-by:
Andrea Righi <andrea.righi@canonical.com> Acked-by:
-
- 08 Apr, 2019 1 commit
-
-
Andrea Righi authored
BugLink: https://bugs.launchpad.net/bugs/1813244 The flow action buffer can be resized if it's not big enough to contain all the requested flow actions. However, this resize doesn't take into account the new requested size, the buffer is only increased by a factor of 2x. This might be not enough to contain the new data, causing a buffer overflow, for example: [ 42.044472] ============================================================================= [ 42.045608] BUG kmalloc-96 (Not tainted): Redzone overwritten [ 42.046415] ----------------------------------------------------------------------------- [ 42.047715] Disabling lock debugging due to kernel taint [ 42.047716] INFO: 0x8bf2c4a5-0x720c0928. First byte 0x0 instead of 0xcc [ 42.048677] INFO: Slab 0xbc6d2040 objects=29 used=18 fp=0xdc07dec4 flags=0x2808101 [ 42.049743] INFO: Object 0xd53a3464 @offset=2528 fp=0xccdcdebb [ 42.050747] Redzone 76f1b237: cc cc cc cc cc cc cc cc ........ [ 42.051839] Object d53a3464: 6b 6b 6b 6b 6b 6b 6b 6b 0c 00 00 00 6c 00 00 00 kkkkkkkk....l... [ 42.053015] Object f49a30cc: 6c 00 0c 00 00 00 00 00 00 00 00 03 78 a3 15 f6 l...........x... [ 42.054203] Object acfe4220: 20 00 02 00 ff ff ff ff 00 00 00 00 00 00 00 00 ............... [ 42.055370] Object 21024e91: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 42.056541] Object 070e04c3: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 42.057797] Object 948a777a: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 42.059061] Redzone 8bf2c4a5: 00 00 00 00 .... [ 42.060189] Padding a681b46e: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ Fix by making sure the new buffer is properly resized to contain all the requested data. BugLink: https://bugs.launchpad.net/bugs/1813244Signed-off-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Acked-by:
-
- 03 Apr, 2019 5 commits
-
-
Khalid Elmously authored
Signed-off-by: -
Khalid Elmously authored
BugLink: https://bugs.launchpad.net/bugs/1822834Signed-off-by:
-
Khalid Elmously authored
Ignore: yes Signed-off-by: -
Khalid Elmously authored
BugLink: http://bugs.launchpad.net/bugs/1786013Signed-off-by:
-
Khalid Elmously authored
BugLink: http://bugs.launchpad.net/bugs/1786013Signed-off-by:
-
- 01 Apr, 2019 24 commits
-
-
Andrea Righi authored
Buglink: https://bugs.launchpad.net/bugs/1812845 Parity page is incorrectly unmapped in finish_parity_scrub(), triggering a reference counter bug on i386, i.e.: [ 157.662401] kernel BUG at mm/highmem.c:349! [ 157.666725] invalid opcode: 0000 [#1] SMP PTI The reason is that kunmap(p_page) was completely left out, so we never did an unmap for the p_page and the loop unmapping the rbio page was iterating over the wrong number of stripes: unmapping should be done with nr_data instead of rbio->real_stripes. Test case to reproduce the bug: - create a raid5 btrfs filesystem: # mkfs.btrfs -m raid5 -d raid5 /dev/sdb /dev/sdc /dev/sdd /dev/sde - mount it: # mount /dev/sdb /mnt - run btrfs scrub in a loop: # while :; do btrfs scrub start -BR /mnt; done BugLink: https://bugs.launchpad.net/bugs/1812845 Fixes: 5a6ac9ea ("Btrfs, raid56: support parity scrub on raid56") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1822271Signed-off-by:
Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by:
-
Wanpeng Li authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit bbeac283 upstream. Reported by syzkaller: The kvm-intel.unrestricted_guest=0 WARNING: CPU: 5 PID: 1014 at /home/kernel/data/kvm/arch/x86/kvm//x86.c:7227 kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm] CPU: 5 PID: 1014 Comm: warn_test Tainted: G W OE 4.13.0-rc3+ #8 RIP: 0010:kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm] Call Trace: ? put_pid+0x3a/0x50 ? rcu_read_lock_sched_held+0x79/0x80 ? kmem_cache_free+0x2f2/0x350 kvm_vcpu_ioctl+0x340/0x700 [kvm] ? kvm_vcpu_ioctl+0x340/0x700 [kvm] ? __fget+0xfc/0x210 do_vfs_ioctl+0xa4/0x6a0 ? __fget+0x11d/0x210 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc2 ? __this_cpu_preempt_check+0x13/0x20 The syszkaller folks reported a residual mmio emulation request to userspace due to vm86 fails to emulate inject real mode interrupt(fails to read CS) and incurs a triple fault. The vCPU returns to userspace with vcpu->mmio_needed == true and KVM_EXIT_SHUTDOWN exit reason. However, the syszkaller testcase constructs several threads to launch the same vCPU, the thread which lauch this vCPU after the thread whichs get the vcpu->mmio_needed == true and KVM_EXIT_SHUTDOWN will trigger the warning. #define _GNU_SOURCE #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/wait.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/mman.h> #include <fcntl.h> #include <unistd.h> #include <linux/kvm.h> #include <stdio.h> int kvmcpu; struct kvm_run *run; void* thr(void* arg) { int res; res = ioctl(kvmcpu, KVM_RUN, 0); printf("ret1=%d exit_reason=%d suberror=%d\n", res, run->exit_reason, run->internal.suberror); return 0; } void test() { int i, kvm, kvmvm; pthread_t th[4]; kvm = open("/dev/kvm", O_RDWR); kvmvm = ioctl(kvm, KVM_CREATE_VM, 0); kvmcpu = ioctl(kvmvm, KVM_CREATE_VCPU, 0); run = (struct kvm_run*)mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, kvmcpu, 0); srand(getpid()); for (i = 0; i < 4; i++) { pthread_create(&th[i], 0, thr, 0); usleep(rand() % 10000); } for (i = 0; i < 4; i++) pthread_join(th[i], 0); } int main() { for (;;) { int pid = fork(); if (pid < 0) exit(1); if (pid == 0) { test(); exit(0); } int status; while (waitpid(pid, &status, __WALL) != pid) {} } return 0; } This patch fixes it by resetting the vcpu->mmio_needed once we receive the triple fault to avoid the residue. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Tested-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 34333cc6 upstream. Regarding segments with a limit==0xffffffff, the SDM officially states: When the effective limit is FFFFFFFFH (4 GBytes), these accesses may or may not cause the indicated exceptions. Behavior is implementation-specific and may vary from one execution to another. In practice, all CPUs that support VMX ignore limit checks for "flat segments", i.e. an expand-up data or code segment with base=0 and limit=0xffffffff. This is subtly different than wrapping the effective address calculation based on the address size, as the flat segment behavior also applies to accesses that would wrap the 4g boundary, e.g. a 4-byte access starting at 0xffffffff will access linear addresses 0xffffffff, 0x0, 0x1 and 0x2. Fixes: f9eb4af6 ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 946c522b upstream. The VMCS.EXIT_QUALIFCATION field reports the displacements of memory operands for various instructions, including VMX instructions, as a naturally sized unsigned value, but masks the value by the addr size, e.g. given a ModRM encoded as -0x28(%ebp), the -0x28 displacement is reported as 0xffffffd8 for a 32-bit address size. Despite some weird wording regarding sign extension, the SDM explicitly states that bits beyond the instructions address size are undefined: In all cases, bits of this field beyond the instructionâ€
™ s address size are undefined. Failure to sign extend the displacement results in KVM incorrectly treating a negative displacement as a large positive displacement when the address size of the VMX instruction is smaller than KVM's native size, e.g. a 32-bit address size on a 64-bit KVM. The very original decoding, added by commit 064aea77 ("KVM: nVMX: Decoding memory operands of VMX instructions"), sort of modeled sign extension by truncating the final virtual/linear address for a 32-bit address size. I.e. it messed up the effective address but made it work by adjusting the final address. When segmentation checks were added, the truncation logic was kept as-is and no sign extension logic was introduced. In other words, it kept calculating the wrong effective address while mostly generating the correct virtual/linear address. As the effective address is what's used in the segment limit checks, this results in KVM incorreclty injecting #GP/#SS faults due to non-existent segment violations when a nested VMM uses negative displacements with an address size smaller than KVM's native address size. Using the -0x28(%ebp) example, an EBP value of 0x1000 will result in KVM using 0x100000fd8 as the effective address when checking for a segment limit violation. This causes a 100% failure rate when running a 32-bit KVM build as L1 on top of a 64-bit KVM L0. Fixes: f9eb4af6 ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions") Cc: stable@vger.kernel.org Signed-off-by: -
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit cc5034a5 upstream. Add missing break statement in order to prevent the code from falling through to case CB_TARGET_MASK. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: dd220a00 ("drm/radeon/kms: add support for streamout v7") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Sakari Ailus authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 9dd0627d upstream. The UVC video driver converts the timestamp from hardware specific unit to one known by the kernel at the time when the buffer is dequeued. This is fine in general, but the streamoff operation consists of the following steps (among other things): 1. uvc_video_clock_cleanup --- the hardware clock sample array is released and the pointer to the array is set to NULL, 2. buffers in active state are returned to the user and 3. buf_finish callback is called on buffers that are prepared. buf_finish includes calling uvc_video_clock_update that accesses the hardware clock sample array. The above is serialised by a queue specific mutex. Address the problem by skipping the clock conversion if the hardware clock sample array is already released. Fixes: 9c0863b1 ("[media] vb2: call buf_finish from __queue_cancel") Reported-by:
Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Tested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Zhang, Jun authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 1d1f898d upstream. The rcu_gp_kthread_wake() function is invoked when it might be necessary to wake the RCU grace-period kthread. Because self-wakeups are normally a useless waste of CPU cycles, if rcu_gp_kthread_wake() is invoked from this kthread, it naturally refuses to do the wakeup. Unfortunately, natural though it might be, this heuristic fails when rcu_gp_kthread_wake() is invoked from an interrupt or softirq handler that interrupted the grace-period kthread just after the final check of the wait-event condition but just before the schedule() call. In this case, a wakeup is required, even though the call to rcu_gp_kthread_wake() is within the RCU grace-period kthread's context. Failing to provide this wakeup can result in grace periods failing to start, which in turn results in out-of-memory conditions. This race window is quite narrow, but it actually did happen during real testing. It would of course need to be fixed even if it was strictly theoretical in nature. This patch does not Cc stable because it does not apply cleanly to earlier kernel versions. Fixes: 48a7639c ("rcu: Make callers awaken grace-period kthread") Reported-by:
"He, Bo" <bo.he@intel.com> Co-developed-by:
"Zhang, Jun" <jun.zhang@intel.com> Co-developed-by:
"xiao, jin" <jin.xiao@intel.com> Co-developed-by:
Bai, Jie A <jie.a.bai@intel.com> Signed-off: "Zhang, Jun" <jun.zhang@intel.com> Signed-off: "He, Bo" <bo.he@intel.com> Signed-off: "xiao, jin" <jin.xiao@intel.com> Signed-off: Bai, Jie A <jie.a.bai@intel.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.ibm.com> Link: https://lkml.kernel.org/r/CD6925E8781EFD4D8E11882D20FC406D52A11F61@SHSMSX104.ccr.corp.intel.comSigned-off-by:
-
Viresh Kumar authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 1fad17fb upstream. If wakeup_source_add() is called right after wakeup_source_remove() for the same wakeup source, timer_setup() may be called for a potentially scheduled timer which is incorrect. To avoid that, move the wakeup source timer cancellation from wakeup_source_drop() to wakeup_source_remove(). Moreover, make wakeup_source_remove() clear the timer function after canceling the timer to let wakeup_source_not_registered() treat unregistered wakeup sources in the same way as the ones that have never been registered. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.4+ <stable@vger.kernel.org> # 4.4+ [ rjw: Subject, changelog, merged two patches together ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Yihao Wu authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit dd838821 upstream. Commit 62a063b8 "nfsd4: fix crash on writing v4_end_grace before nfsd startup" is trying to fix a NULL dereference issue, but it mistakenly checks if the nfsd server is started. So fix it. Fixes: 62a063b8 "nfsd4: fix crash on writing v4_end_grace before nfsd startup" Cc: stable@vger.kernel.org Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by:
Yihao Wu <wuyihao@linux.alibaba.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
NeilBrown authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit b602345d upstream. If the result of an NFSv3 readdir{,plus} request results in the "offset" on one entry having to be split across 2 pages, and is sized so that the next directory entry doesn't fit in the requested size, then memory corruption can happen. When encode_entry() is called after encoding the last entry that fits, it notices that ->offset and ->offset1 are set, and so stores the offset value in the two pages as required. It clears ->offset1 but *does not* clear ->offset. Normally this omission doesn't matter as encode_entry_baggage() will be called, and will set ->offset to a suitable value (not on a page boundary). But in the case where cd->buflen < elen and nfserr_toosmall is returned, ->offset is not reset. This means that nfsd3proc_readdirplus will see ->offset with a value 4 bytes before the end of a page, and ->offset1 set to NULL. It will try to write 8bytes to ->offset. If we are lucky, the next page will be read-only, and the system will BUG: unable to handle kernel paging request at... If we are unlucky, some innocent page will have the first 4 bytes corrupted. nfsd3proc_readdir() doesn't even check for ->offset1, it just blindly writes 8 bytes to the offset wherever it is. Fix this by clearing ->offset after it is used, and copying the ->offset handling code from nfsd3_proc_readdirplus into nfsd3_proc_readdir. (Note that the commit hash in the Fixes tag is from the 'history' tree - this bug predates git). Fixes: 0b1d57cf ("[PATCH] kNFSd: Fix nfs3 dentry encoding") Fixes-URL: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=0b1d57cf7654 Cc: stable@vger.kernel.org (v2.6.12+) Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Trond Myklebust authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 8127d827 upstream. If the I/O completion failed with a fatal error, then we should just exit nfs_pageio_complete_mirror() rather than try to recoalesce. Fixes: a7d42ddb ("nfs: add mirroring support to pgio layer") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.0+ Signed-off-by:
-
Trond Myklebust authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 4d91969e upstream. Whether we need to exit early, or just reprocess the list, we must not lost track of the request which failed to get recoalesced. Fixes: 03d5eb65 ("NFS: Fix a memory leak in nfs_do_recoalesce") Signed-off-by:
-
Aditya Pakki authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit e406f12d upstream. mddev->sync_thread can be set to NULL on kzalloc failure downstream. The patch checks for such a scenario and frees allocated resources. Committer node: Added similar fix to raid5.c, as suggested by Guoqing. Cc: stable@vger.kernel.org # v3.16+ Acked-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 5a99d99e upstream. Auxtrace records might have up to 7 bytes of padding appended. Adjust the overlap accordingly. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190206103947.15750-3-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit c3fcadf0 upstream. Define auxtrace record alignment so that it can be referenced elsewhere. Note this is preparation for patch "perf intel-pt: Fix overlap calculation for padding" Signed-off-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 03997612 upstream. CYC packet timestamp calculation depends upon CBR which was being cleared upon overflow (OVF). That can cause errors due to failing to synchronize with sideband events. Even if a CBR change has been lost, the old CBR is still a better estimate than zero. So remove the clearing of CBR. Signed-off-by:
-
Peng Tao authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit d600ad1f upstream. For ERESTARTSYS/EIO/EROFS/ENOSPC/E2BIG in layoutget, we should just bail out instead of hiding the error and retrying inband IO. Change all the call sites to pop the error all the way up. Signed-off-by:
Peng Tao <tao.peng@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
NeilBrown authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 0bdb50c5 upstream. A dm-raid array with devices larger than 4GB won't assemble on a 32 bit host since _check_data_dev_sectors() was added in 4.16. This is because to_sector() treats its argument as an "unsigned long" which is 32bits (4GB) on a 32bit host. Using "unsigned long long" is more correct. Kernels as early as 4.2 can have other problems due to to_sector() being used on the size of a device. Fixes: 0cf45031 ("dm raid: add support for the MD RAID0 personality") cc: stable@vger.kernel.org (v4.2+) Reported-and-tested-by:
Guillaume Perréal <gperreal@free.fr> Signed-off-by:
NeilBrown <neil@brown.name> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit e2477233 upstream. Fix boolean expressions by using logical AND operator '&&' instead of bitwise operator '&'. This issue was detected with the help of Coccinelle. Fixes: 4fa084af ("ARM: OSIRIS: DVS (Dynamic Voltage Scaling) supoort.") Cc: stable@vger.kernel.org Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Christophe Leroy authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 36da5ff0 upstream. The 83xx has 8 SPRG registers and uses at least SPRG4 for DTLB handling LRU. Fixes: 2319f123 ("powerpc/mm: e300c2/c3/c4 TLB errata workaround") Cc: stable@vger.kernel.org Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Jordan Niethe authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 7b62f9bd upstream. Currently the opal log is globally readable. It is kernel policy to limit the visibility of physical addresses / kernel pointers to root. Given this and the fact the opal log may contain this information it would be better to limit the readability to root. Fixes: bfc36894 ("powerpc/powernv: Add OPAL message log interface") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Reviewed-by:
Stewart Smith <stewart@linux.ibm.com> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Christophe Leroy authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 6d183ca8 upstream. 'nobats' kernel parameter or some options like CONFIG_DEBUG_PAGEALLOC deny the use of BATS for mapping memory. This patch makes sure that the specific wii RAM mapping function takes it into account as well. Fixes: de32400d ("wii: use both mem1 and mem2 as ram") Cc: stable@vger.kernel.org Reviewed-by:
Jonathan Neuschafer <j.neuschaefer@gmx.net> Signed-off-by:
-
Christophe Leroy authored
BugLink: https://bugs.launchpad.net/bugs/1822271 commit 9580b71b upstream. Clear the on-stack STACK_FRAME_REGS_MARKER on exception exit in order to avoid confusing stacktrace like the one below. Call Trace: [c0e9dca0] [c01c42a0] print_address_description+0x64/0x2bc (unreliable) [c0e9dcd0] [c01c4684] kasan_report+0xfc/0x180 [c0e9dd10] [c0895130] memchr+0x24/0x74 [c0e9dd30] [c00a9e38] msg_print_text+0x124/0x574 [c0e9dde0] [c00ab710] console_unlock+0x114/0x4f8 [c0e9de40] [c00adc60] vprintk_emit+0x188/0x1c4 --- interrupt: c0e9df00 at 0x400f330 LR = init_stack+0x1f00/0x2000 [c0e9de80] [c00ae3c4] printk+0xa8/0xcc (unreliable) [c0e9df20] [c0c27e44] early_irq_init+0x38/0x108 [c0e9df50] [c0c15434] start_kernel+0x310/0x488 [c0e9dff0] [00003484] 0x3484 With this patch the trace becomes: Call Trace: [c0e9dca0] [c01c42c0] print_address_description+0x64/0x2bc (unreliable) [c0e9dcd0] [c01c46a4] kasan_report+0xfc/0x180 [c0e9dd10] [c0895150] memchr+0x24/0x74 [c0e9dd30] [c00a9e58] msg_print_text+0x124/0x574 [c0e9dde0] [c00ab730] console_unlock+0x114/0x4f8 [c0e9de40] [c00adc80] vprintk_emit+0x188/0x1c4 [c0e9de80] [c00ae3e4] printk+0xa8/0xcc [c0e9df20] [c0c27e44] early_irq_init+0x38/0x108 [c0e9df50] [c0c15434] start_kernel+0x310/0x488 [c0e9dff0] [00003484] 0x3484 Cc: stable@vger.kernel.org Signed-off-by:
-
