- 23 Mar, 2019 40 commits
-
-
Sean Christopherson authored
commit 15248258 upstream. kvm_arch_memslots_updated() is at this point in time an x86-specific hook for handling MMIO generation wraparound. x86 stashes 19 bits of the memslots generation number in its MMIO sptes in order to avoid full page fault walks for repeat faults on emulated MMIO addresses. Because only 19 bits are used, wrapping the MMIO generation number is possible, if unlikely. kvm_arch_memslots_updated() alerts x86 that the generation has changed so that it can invalidate all MMIO sptes in case the effective MMIO generation has wrapped so as to avoid using a stale spte, e.g. a (very) old spte that was created with generation==0. Given that the purpose of kvm_arch_memslots_updated() is to prevent consuming stale entries, it needs to be called before the new generation is propagated to memslots. Invalidating the MMIO sptes after updating memslots means that there is a window where a vCPU could dereference the new memslots generation, e.g. 0, and incorrectly reuse an old MMIO spte that was created with (pre-wrap) generation==0. Fixes: e59dbe09 ("KVM: Introduce kvm_arch_memslots_updated()") Cc: <stable@vger.kernel.org> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gustavo A. R. Silva authored
commit cc5034a5 upstream. Add missing break statement in order to prevent the code from falling through to case CB_TARGET_MASK. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: dd220a00 ("drm/radeon/kms: add support for streamout v7") Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Steve Longerbeam authored
commit 4bc1ab41 upstream. Move upstream stream off to just after receiving the last EOF completion and disabling the CSI (and thus before disabling the IDMA channel) in csi_stop(). For symmetry also move upstream stream on to beginning of csi_start(). Doing this makes csi_s_stream() more symmetric with prp_s_stream() which will require the same change to fix a hard lockup. Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Cc: stable@vger.kernel.org # for 4.13 and up Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Steve Longerbeam authored
commit 2e0fe66e upstream. Disable the CSI immediately after receiving the last EOF before stream off (and thus before disabling the IDMA channel). Do this by moving the wait for EOF completion into a new function csi_idmac_wait_last_eof(). This fixes a complete system hard lockup on the SabreAuto when streaming from the ADV7180, by repeatedly sending a stream off immediately followed by stream on: while true; do v4l2-ctl -d4 --stream-mmap --stream-count=3; done Eventually this either causes the system lockup or EOF timeouts at all subsequent stream on, until a system reset. The lockup occurs when disabling the IDMA channel at stream off. Disabling the CSI before disabling the IDMA channel appears to be a reliable fix for the hard lockup. Fixes: 4a34ec8e ("[media] media: imx: Add CSI subdev driver") Reported-by:
Gaël PORTAY <gael.portay@collabora.com> Signed-off-by:
-
Lucas A. M. Magalhães authored
commit adc589d2 upstream. Add a linear pipeline logic for the stream control. It's created by walking backwards on the entity graph. When the stream starts it will simply loop through the pipeline calling the respective process_frame function of each entity. Fixes: f2fe8906 ("vimc: Virtual Media Controller core, capture and sensor") Cc: stable@vger.kernel.org # for v4.20 Signed-off-by:
Lucas A. M. Magalhães <lucmaga@gmail.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Sakari Ailus authored
commit 9dd0627d upstream. The UVC video driver converts the timestamp from hardware specific unit to one known by the kernel at the time when the buffer is dequeued. This is fine in general, but the streamoff operation consists of the following steps (among other things): 1. uvc_video_clock_cleanup --- the hardware clock sample array is released and the pointer to the array is set to NULL, 2. buffers in active state are returned to the user and 3. buf_finish callback is called on buffers that are prepared. buf_finish includes calling uvc_video_clock_update that accesses the hardware clock sample array. The above is serialised by a queue specific mutex. Address the problem by skipping the clock conversion if the hardware clock sample array is already released. Fixes: 9c0863b1 ("[media] vb2: call buf_finish from __queue_cancel") Reported-by:
Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Tested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Steve Longerbeam authored
commit a19c2267 upstream. Upstream must be stopped immediately after receiving the last EOF and before disabling the IDMA channel. This can be accomplished by moving upstream stream off to just after receiving the last EOF completion in prp_stop(). For symmetry also move upstream stream on to end of prp_start(). This fixes a complete system hard lockup on the SabreAuto when streaming from the ADV7180, by repeatedly sending a stream off immediately followed by stream on: while true; do v4l2-ctl -d1 --stream-mmap --stream-count=3; done Eventually this either causes the system lockup or EOF timeouts at all subsequent stream on, until a system reset. The lockup occurs when disabling the IDMA channel at stream off. Stopping the video data stream entering the IDMA channel before disabling the channel itself appears to be a reliable fix for the hard lockup. Fixes: f0d9c892 ("[media] media: imx: Add IC subdev drivers") Reported-by:
-
Zhang, Jun authored
commit 1d1f898d upstream. The rcu_gp_kthread_wake() function is invoked when it might be necessary to wake the RCU grace-period kthread. Because self-wakeups are normally a useless waste of CPU cycles, if rcu_gp_kthread_wake() is invoked from this kthread, it naturally refuses to do the wakeup. Unfortunately, natural though it might be, this heuristic fails when rcu_gp_kthread_wake() is invoked from an interrupt or softirq handler that interrupted the grace-period kthread just after the final check of the wait-event condition but just before the schedule() call. In this case, a wakeup is required, even though the call to rcu_gp_kthread_wake() is within the RCU grace-period kthread's context. Failing to provide this wakeup can result in grace periods failing to start, which in turn results in out-of-memory conditions. This race window is quite narrow, but it actually did happen during real testing. It would of course need to be fixed even if it was strictly theoretical in nature. This patch does not Cc stable because it does not apply cleanly to earlier kernel versions. Fixes: 48a7639c ("rcu: Make callers awaken grace-period kthread") Reported-by:
"He, Bo" <bo.he@intel.com> Co-developed-by:
"Zhang, Jun" <jun.zhang@intel.com> Co-developed-by:
"xiao, jin" <jin.xiao@intel.com> Co-developed-by:
Bai, Jie A <jie.a.bai@intel.com> Signed-off: "Zhang, Jun" <jun.zhang@intel.com> Signed-off: "He, Bo" <bo.he@intel.com> Signed-off: "xiao, jin" <jin.xiao@intel.com> Signed-off: Bai, Jie A <jie.a.bai@intel.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.ibm.com> Link: https://lkml.kernel.org/r/CD6925E8781EFD4D8E11882D20FC406D52A11F61@SHSMSX104.ccr.corp.intel.comSigned-off-by:
-
Jarkko Sakkinen authored
commit f5595f5b upstream. The send() callback should never return length as it does not in every driver except tpm_crb in the success case. The reason is that the main transmit functionality only cares about whether the transmit was successful or not and ignores the count completely. Suggested-by:
Stefan Berger <stefanb@linux.ibm.com> Cc: stable@vger.kernel.org Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by:
Jerry Snitselaar <jsnitsel@redhat.com> Tested-by:
Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by:
-
Jarkko Sakkinen authored
commit 3d7a850f upstream. The current approach to read first 6 bytes from the response and then tail of the response, can cause the 2nd memcpy_fromio() to do an unaligned read (e.g. read 32-bit word from address aligned to a 16-bits), depending on how memcpy_fromio() is implemented. If this happens, the read will fail and the memory controller will fill the read with 1's. This was triggered by 170d13ca, which should be probably refined to check and react to the address alignment. Before that commit, on x86 memcpy_fromio() turned out to be memcpy(). By a luck GCC has done the right thing (from tpm_crb's perspective) for us so far, but we should not rely on that. Thus, it makes sense to fix this also in tpm_crb, not least because the fix can be then backported to stable kernels and make them more robust when compiled in differing environments. Cc: stable@vger.kernel.org Cc: James Morris <jmorris@namei.org> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Fixes: 30fc8d13 ("tpm: TPM 2.0 CRB Interface") Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Aditya Pakki authored
commit e406f12d upstream. mddev->sync_thread can be set to NULL on kzalloc failure downstream. The patch checks for such a scenario and frees allocated resources. Committer node: Added similar fix to raid5.c, as suggested by Guoqing. Cc: stable@vger.kernel.org # v3.16+ Acked-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Adrian Hunter authored
commit 07633387 upstream. When TSC is not available, "timeless" decoding is used but a divide by zero occurs if perf_time_to_tsc() is called. Ensure the divisor is not zero. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org # v4.9+ Link: https://lkml.kernel.org/n/tip-1i4j0wqoc8vlbkcizqqxpsf4@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Adrian Hunter authored
commit 5a99d99e upstream. Auxtrace records might have up to 7 bytes of padding appended. Adjust the overlap accordingly. Signed-off-by:
-
Adrian Hunter authored
commit c3fcadf0 upstream. Define auxtrace record alignment so that it can be referenced elsewhere. Note this is preparation for patch "perf intel-pt: Fix overlap calculation for padding" Signed-off-by:
-
Adrian Hunter authored
commit 03997612 upstream. CYC packet timestamp calculation depends upon CBR which was being cleared upon overflow (OVF). That can cause errors due to failing to synchronize with sideband events. Even if a CBR change has been lost, the old CBR is still a better estimate than zero. So remove the clearing of CBR. Signed-off-by:
-
Josh Poimboeuf authored
commit f76a16ad upstream. The .orc_unwind section is a packed array of 6-byte structs. It's currently aligned to 6 bytes, which is causing warnings in the LLD linker. Six isn't a power of two, so it's not a valid alignment value. The actual alignment doesn't matter much because it's an array of packed structs. An alignment of two is sufficient. In reality it always gets aligned to four bytes because it comes immediately after the 4-byte-aligned .orc_unwind_ip section. Fixes: ee9f8fce ("x86/unwind: Add the ORC unwinder") Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Reported-by:
Dmitry Golovin <dima@golovin.in> Reported-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
-
Daniel Axtens authored
commit 9951379b upstream. Some users see panics like the following when performing fstrim on a bcached volume: [ 529.803060] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 530.183928] #PF error: [normal kernel read fault] [ 530.412392] PGD 8000001f42163067 P4D 8000001f42163067 PUD 1f42168067 PMD 0 [ 530.750887] Oops: 0000 [#1] SMP PTI [ 530.920869] CPU: 10 PID: 4167 Comm: fstrim Kdump: loaded Not tainted 5.0.0-rc1+ #3 [ 531.290204] Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 12/27/2015 [ 531.693137] RIP: 0010:blk_queue_split+0x148/0x620 [ 531.922205] Code: 60 38 89 55 a0 45 31 db 45 31 f6 45 31 c9 31 ff 89 4d 98 85 db 0f 84 7f 04 00 00 44 8b 6d 98 4c 89 ee 48 c1 e6 04 49 03 70 78 <8b> 46 08 44 8b 56 0c 48 8b 16 44 29 e0 39 d8 48 89 55 a8 0f 47 c3 [ 532.838634] RSP: 0018:ffffb9b708df39b0 EFLAGS: 00010246 [ 533.093571] RAX: 00000000ffffffff RBX: 0000000000046000 RCX: 0000000000000000 [ 533.441865] RDX: 0000000000000200 RSI: 0000000000000000 RDI: 0000000000000000 [ 533.789922] RBP: ffffb9b708df3a48 R08: ffff940d3b3fdd20 R09: 0000000000000000 [ 534.137512] R10: ffffb9b708df3958 R11: 0000000000000000 R12: 0000000000000000 [ 534.485329] R13: 0000000000000000 R14: 0000000000000000 R15: ffff940d39212020 [ 534.833319] FS: 00007efec26e3840(0000) GS:ffff940d1f480000(0000) knlGS:0000000000000000 [ 535.224098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 535.504318] CR2: 0000000000000008 CR3: 0000001f4e256004 CR4: 00000000001606e0 [ 535.851759] Call Trace: [ 535.970308] ? mempool_alloc_slab+0x15/0x20 [ 536.174152] ? bch_data_insert+0x42/0xd0 [bcache] [ 536.403399] blk_mq_make_request+0x97/0x4f0 [ 536.607036] generic_make_request+0x1e2/0x410 [ 536.819164] submit_bio+0x73/0x150 [ 536.980168] ? submit_bio+0x73/0x150 [ 537.149731] ? bio_associate_blkg_from_css+0x3b/0x60 [ 537.391595] ? _cond_resched+0x1a/0x50 [ 537.573774] submit_bio_wait+0x59/0x90 [ 537.756105] blkdev_issue_discard+0x80/0xd0 [ 537.959590] ext4_trim_fs+0x4a9/0x9e0 [ 538.137636] ? ext4_trim_fs+0x4a9/0x9e0 [ 538.324087] ext4_ioctl+0xea4/0x1530 [ 538.497712] ? _copy_to_user+0x2a/0x40 [ 538.679632] do_vfs_ioctl+0xa6/0x600 [ 538.853127] ? __do_sys_newfstat+0x44/0x70 [ 539.051951] ksys_ioctl+0x6d/0x80 [ 539.212785] __x64_sys_ioctl+0x1a/0x20 [ 539.394918] do_syscall_64+0x5a/0x110 [ 539.568674] entry_SYSCALL_64_after_hwframe+0x44/0xa9 We have observed it where both: 1) LVM/devmapper is involved (bcache backing device is LVM volume) and 2) writeback cache is involved (bcache cache_mode is writeback) On one machine, we can reliably reproduce it with: # echo writeback > /sys/block/bcache0/bcache/cache_mode (not sure whether above line is required) # mount /dev/bcache0 /test # for i in {0..10}; do file="$(mktemp /test/zero.XXX)" dd if=/dev/zero of="$file" bs=1M count=256 sync rm $file done # fstrim -v /test Observing this with tracepoints on, we see the following writes: fstrim-18019 [022] .... 91107.302026: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0 DS 4260112 + 196352 hit 0 bypass 1 fstrim-18019 [022] .... 91107.302050: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0 DS 4456464 + 262144 hit 0 bypass 1 fstrim-18019 [022] .... 91107.302075: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0 DS 4718608 + 81920 hit 0 bypass 1 fstrim-18019 [022] .... 91107.302094: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0 DS 5324816 + 180224 hit 0 bypass 1 fstrim-18019 [022] .... 91107.302121: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0 DS 5505040 + 262144 hit 0 bypass 1 fstrim-18019 [022] .... 91107.302145: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0 DS 5767184 + 81920 hit 0 bypass 1 fstrim-18019 [022] .... 91107.308777: bcache_write: 73f95583-561c-408f-a93a-4cbd2498f5c8 inode 0 DS 6373392 + 180224 hit 1 bypass 0 <crash> Note the final one has different hit/bypass flags. This is because in should_writeback(), we were hitting a case where the partial stripe condition was returning true and so should_writeback() was returning true early. If that hadn't been the case, it would have hit the would_skip test, and as would_skip == s->iop.bypass == true, should_writeback() would have returned false. Looking at the git history from 'commit 72c27061 ("bcache: Write out full stripes")', it looks like the idea was to optimise for raid5/6: * If a stripe is already dirty, force writes to that stripe to writeback mode - to help build up full stripes of dirty data To fix this issue, make sure that should_writeback() on a discard op never returns true. More details of debugging: https://www.spinics.net/lists/linux-bcache/msg06996.html Previous reports: - https://bugzilla.kernel.org/show_bug.cgi?id=201051 - https://bugzilla.kernel.org/show_bug.cgi?id=196103 - https://www.spinics.net/lists/linux-bcache/msg06885.html (Coly Li: minor modification to follow maximum 75 chars per line rule) Cc: Kent Overstreet <koverstreet@google.com> Cc: stable@vger.kernel.org Fixes: 72c27061 ("bcache: Write out full stripes") Signed-off-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Viresh Kumar authored
commit 1fad17fb upstream. If wakeup_source_add() is called right after wakeup_source_remove() for the same wakeup source, timer_setup() may be called for a potentially scheduled timer which is incorrect. To avoid that, move the wakeup source timer cancellation from wakeup_source_drop() to wakeup_source_remove(). Moreover, make wakeup_source_remove() clear the timer function after canceling the timer to let wakeup_source_not_registered() treat unregistered wakeup sources in the same way as the ones that have never been registered. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.4+ <stable@vger.kernel.org> # 4.4+ [ rjw: Subject, changelog, merged two patches together ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Trond Myklebust authored
commit c1dffe0b upstream. If we have to retransmit a request, we should ensure that we reinitialise the sequence results structure, since in the event of a signal we need to treat the request as if it had not been sent. Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Yihao Wu authored
commit dd838821 upstream. Commit 62a063b8 "nfsd4: fix crash on writing v4_end_grace before nfsd startup" is trying to fix a NULL dereference issue, but it mistakenly checks if the nfsd server is started. So fix it. Fixes: 62a063b8 "nfsd4: fix crash on writing v4_end_grace before nfsd startup" Cc: stable@vger.kernel.org Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Signed-off-by:
Yihao Wu <wuyihao@linux.alibaba.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
NeilBrown authored
commit b602345d upstream. If the result of an NFSv3 readdir{,plus} request results in the "offset" on one entry having to be split across 2 pages, and is sized so that the next directory entry doesn't fit in the requested size, then memory corruption can happen. When encode_entry() is called after encoding the last entry that fits, it notices that ->offset and ->offset1 are set, and so stores the offset value in the two pages as required. It clears ->offset1 but *does not* clear ->offset. Normally this omission doesn't matter as encode_entry_baggage() will be called, and will set ->offset to a suitable value (not on a page boundary). But in the case where cd->buflen < elen and nfserr_toosmall is returned, ->offset is not reset. This means that nfsd3proc_readdirplus will see ->offset with a value 4 bytes before the end of a page, and ->offset1 set to NULL. It will try to write 8bytes to ->offset. If we are lucky, the next page will be read-only, and the system will BUG: unable to handle kernel paging request at... If we are unlucky, some innocent page will have the first 4 bytes corrupted. nfsd3proc_readdir() doesn't even check for ->offset1, it just blindly writes 8 bytes to the offset wherever it is. Fix this by clearing ->offset after it is used, and copying the ->offset handling code from nfsd3_proc_readdirplus into nfsd3_proc_readdir. (Note that the commit hash in the Fixes tag is from the 'history' tree - this bug predates git). Fixes: 0b1d57cf ("[PATCH] kNFSd: Fix nfs3 dentry encoding") Fixes-URL: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=0b1d57cf7654 Cc: stable@vger.kernel.org (v2.6.12+) Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Trond Myklebust authored
commit 8127d827 upstream. If the I/O completion failed with a fatal error, then we should just exit nfs_pageio_complete_mirror() rather than try to recoalesce. Fixes: a7d42ddb ("nfs: add mirroring support to pgio layer") Signed-off-by:
-
Trond Myklebust authored
commit 4d91969e upstream. Whether we need to exit early, or just reprocess the list, we must not lost track of the request which failed to get recoalesced. Fixes: 03d5eb65 ("NFS: Fix a memory leak in nfs_do_recoalesce") Signed-off-by:
-
Trond Myklebust authored
commit f57dcf4c upstream. When we fail to add the request to the I/O queue, we currently leave it to the caller to free the failed request. However since some of the requests that fail are actually created by nfs_pageio_add_request() itself, and are not passed back the caller, this leads to a leakage issue, which can again cause page locks to leak. This commit addresses the leakage by freeing the created requests on error, using desc->pg_completion_ops->error_cleanup() Signed-off-by:
-
Pavel Machek authored
commit fd10606f upstream. The driver doesn't generate uevents on charger connect/disconnect. This leads to UPower not detecting when AC is on or off... and that is bad. Reported by Arthur D. on github ( https://github.com/maemo-leste/bugtracker/issues/206 ), thanks to Merlijn Wajer for suggesting a fix. Cc: stable@kernel.org Signed-off-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Mikulas Patocka authored
commit 22555744 upstream. When using dm-integrity underneath md-raid, some tests with raid auto-correction trigger large amounts of integrity failures - and all these failures print an error message. These messages can bring the system to a halt if the system is using serial console. Fix this by limiting the rate of error messages - it improves the speed of raid recovery and avoids the hang. Fixes: 7eada909 ("dm: add integrity target") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
NeilBrown authored
commit 0bdb50c5 upstream. A dm-raid array with devices larger than 4GB won't assemble on a 32 bit host since _check_data_dev_sectors() was added in 4.16. This is because to_sector() treats its argument as an "unsigned long" which is 32bits (4GB) on a 32bit host. Using "unsigned long long" is more correct. Kernels as early as 4.2 can have other problems due to to_sector() being used on the size of a device. Fixes: 0cf45031 ("dm raid: add support for the MD RAID0 personality") cc: stable@vger.kernel.org (v4.2+) Reported-and-tested-by:
Guillaume Perréal <gperreal@free.fr> Signed-off-by:
NeilBrown <neil@brown.name> Signed-off-by:
-
Dave Martin authored
commit c88b0936 upstream. Due to what looks like a typo dating back to the original addition of FPEXC32_EL2 handling, KVM currently initialises this register to an architecturally invalid value. As a result, the VECITR field (RES1) in bits [10:8] is initialised with 0, and the two reserved (RES0) bits [6:5] are initialised with 1. (In the Common VFP Subarchitecture as specified by ARMv7-A, these two bits were IMP DEF. ARMv8-A removes them.) This patch changes the reset value from 0x70 to 0x700, which reflects the architectural constraints and is presumably what was originally intended. Cc: <stable@vger.kernel.org> # 4.12.x- Cc: Christoffer Dall <christoffer.dall@arm.com> Fixes: 62a89c44 ("arm64: KVM: 32bit handling of coprocessor traps") Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Will Deacon authored
commit 6bd28856 upstream. Debug exception handlers may be called for exceptions generated both by user and kernel code. In many cases, this is checked explicitly, but in other cases things either happen to work by happy accident or they go slightly wrong. For example, executing 'brk #4' from userspace will enter the kprobes code and be ignored, but the instruction will be retried forever in userspace instead of delivering a SIGTRAP. Fix this issue in the most stable-friendly fashion by simply adding explicit checks of the triggering exception level to all of our debug exception handlers. Cc: <stable@vger.kernel.org> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Julien Thierry authored
commit 5870970b upstream. When using VHE, the host needs to clear HCR_EL2.TGE bit in order to interact with guest TLBs, switching from EL2&0 translation regime to EL1&0. However, some non-maskable asynchronous event could happen while TGE is cleared like SDEI. Because of this address translation operations relying on EL2&0 translation regime could fail (tlb invalidation, userspace access, ...). Fix this by properly setting HCR_EL2.TGE when entering NMI context and clear it if necessary when returning to the interrupted context. Signed-off-by:
Julien Thierry <julien.thierry@arm.com> Suggested-by:
James Morse <james.morse@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: James Morse <james.morse@arm.com> Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by:
-
Gustavo A. R. Silva authored
commit e2477233 upstream. Fix boolean expressions by using logical AND operator '&&' instead of bitwise operator '&'. This issue was detected with the help of Coccinelle. Fixes: 4fa084af ("ARM: OSIRIS: DVS (Dynamic Voltage Scaling) supoort.") Cc: stable@vger.kernel.org Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Christophe Leroy authored
commit 9bf3d3c4 upstream. Today's message is useless: [ 42.253267] Kernel stack overflow in process (ptrval), r1=c65500b0 This patch fixes it: [ 66.905235] Kernel stack overflow in process sh[356], r1=c65560b0 Fixes: ad67b74d ("printk: hash addresses printed with %p") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Use task_pid_nr()] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Christophe Leroy authored
commit 0bbea75c upstream. Looks like book3s/32 doesn't set RI on machine check, so checking RI before calling die() will always be fatal allthought this is not an issue in most cases. Fixes: b96672dd ("powerpc: Machine check interrupt is a non-maskable interrupt") Fixes: daf00ae7 ("powerpc/traps: restore recoverability of machine_check interrupts") Signed-off-by:
-
Aneesh Kumar K.V authored
commit 35f2806b upstream. We added runtime allocation of 16G pages in commit 4ae279c2 ("powerpc/mm/hugetlb: Allow runtime allocation of 16G.") That was done to enable 16G allocation on PowerNV and KVM config. In case of KVM config, we mostly would have the entire guest RAM backed by 16G hugetlb pages for this to work. PAPR do support partial backing of guest RAM with hugepages via ibm,expected#pages node of memory node in the device tree. This means rest of the guest RAM won't be backed by 16G contiguous pages in the host and hence a hash page table insertion can fail in such case. An example error message will look like hash-mmu: mm: Hashing failure ! EA=0x7efc00000000 access=0x8000000000000006 current=readback hash-mmu: trap=0x300 vsid=0x67af789 ssize=1 base psize=14 psize 14 pte=0xc000000400000386 readback[12260]: unhandled signal 7 at 00007efc00000000 nip 00000000100012d0 lr 000000001000127c code 2 This patch address that by preventing runtime allocation of 16G hugepages in LPAR config. To allocate 16G hugetlb one need to kernel command line hugepagesz=16G hugepages=<number of 16G pages> With radix translation mode we don't run into this issue. This change will prevent runtime allocation of 16G hugetlb pages on kvm with hash translation mode. However, with the current upstream it was observed that 16G hugetlbfs backed guest doesn't boot at all. We observe boot failure with the below message: [131354.647546] KVM: map_vrma at 0 failed, ret=-4 That means this patch is not resulting in an observable regression. Once we fix the boot issue with 16G hugetlb backed memory, we need to use ibm,expected#pages memory node attribute to indicate 16G page reservation to the guest. This will also enable partial backing of guest RAM with 16G pages. Fixes: 4ae279c2 ("powerpc/mm/hugetlb: Allow runtime allocation of 16G.") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Michael Ellerman authored
commit ca6d5149 upstream. GCC 8 warns about the logic in vr_get/set(), which with -Werror breaks the build: In function ‘user_regset_copyin’, inlined from ‘vr_set’ at arch/powerpc/kernel/ptrace.c:628:9: include/linux/regset.h:295:4: error: ‘memcpy’ offset [-527, -529] is out of the bounds [0, 16] of object ‘vrsave’ with type ‘union <anonymous>’ [-Werror=array-bounds] arch/powerpc/kernel/ptrace.c: In function ‘vr_set’: arch/powerpc/kernel/ptrace.c:623:5: note: ‘vrsave’ declared here } vrsave; This has been identified as a regression in GCC, see GCC bug 88273. However we can avoid the warning and also simplify the logic and make it more robust. Currently we pass -1 as end_pos to user_regset_copyout(). This says "copy up to the end of the regset". The definition of the regset is: [REGSET_VMX] = { .core_note_type = NT_PPC_VMX, .n = 34, .size = sizeof(vector128), .align = sizeof(vector128), .active = vr_active, .get = vr_get, .set = vr_set }, The end is calculated as (n * size), ie. 34 * sizeof(vector128). In vr_get/set() we pass start_pos as 33 * sizeof(vector128), meaning we can copy up to sizeof(vector128) into/out-of vrsave. The on-stack vrsave is defined as: union { elf_vrreg_t reg; u32 word; } vrsave; And elf_vrreg_t is: typedef __vector128 elf_vrreg_t; So there is no bug, but we rely on all those sizes lining up, otherwise we would have a kernel stack exposure/overwrite on our hands. Rather than relying on that we can pass an explict end_pos based on the sizeof(vrsave). The result should be exactly the same but it's more obviously not over-reading/writing the stack and it avoids the compiler warning. Reported-by:
Meelis Roos <mroos@linux.ee> Reported-by:
Mathieu Malaterre <malat@debian.org> Cc: stable@vger.kernel.org Tested-by:
-
Mark Cave-Ayland authored
commit fe1ef6bc upstream. Commit 8792468d "powerpc: Add the ability to save FPU without giving it up" unexpectedly removed the MSR_FE0 and MSR_FE1 bits from the bitmask used to update the MSR of the previous thread in __giveup_fpu() causing a KVM-PR MacOS guest to lockup and panic the host kernel. Leaving FE0/1 enabled means unrelated processes might receive FPEs when they're not expecting them and crash. In particular if this happens to init the host will then panic. eg (transcribed): qemu-system-ppc[837]: unhandled signal 8 at 12cc9ce4 nip 12cc9ce4 lr 12cc9ca4 code 0 systemd[1]: unhandled signal 8 at 202f02e0 nip 202f02e0 lr 001003d4 code 0 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Reinstate these bits to the MSR bitmask to enable MacOS guests to run under 32-bit KVM-PR once again without issue. Fixes: 8792468d ("powerpc: Add the ability to save FPU without giving it up") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by:
Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by:
-
Christophe Leroy authored
commit 36da5ff0 upstream. The 83xx has 8 SPRG registers and uses at least SPRG4 for DTLB handling LRU. Fixes: 2319f123 ("powerpc/mm: e300c2/c3/c4 TLB errata workaround") Cc: stable@vger.kernel.org Signed-off-by:
-
Jordan Niethe authored
commit 7b62f9bd upstream. Currently the opal log is globally readable. It is kernel policy to limit the visibility of physical addresses / kernel pointers to root. Given this and the fact the opal log may contain this information it would be better to limit the readability to root. Fixes: bfc36894 ("powerpc/powernv: Add OPAL message log interface") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Reviewed-by:
Stewart Smith <stewart@linux.ibm.com> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Christophe Leroy authored
commit 6d183ca8 upstream. 'nobats' kernel parameter or some options like CONFIG_DEBUG_PAGEALLOC deny the use of BATS for mapping memory. This patch makes sure that the specific wii RAM mapping function takes it into account as well. Fixes: de32400d ("wii: use both mem1 and mem2 as ram") Cc: stable@vger.kernel.org Reviewed-by:
Jonathan Neuschafer <j.neuschaefer@gmx.net> Signed-off-by:
-
Christophe Leroy authored
commit 9580b71b upstream. Clear the on-stack STACK_FRAME_REGS_MARKER on exception exit in order to avoid confusing stacktrace like the one below. Call Trace: [c0e9dca0] [c01c42a0] print_address_description+0x64/0x2bc (unreliable) [c0e9dcd0] [c01c4684] kasan_report+0xfc/0x180 [c0e9dd10] [c0895130] memchr+0x24/0x74 [c0e9dd30] [c00a9e38] msg_print_text+0x124/0x574 [c0e9dde0] [c00ab710] console_unlock+0x114/0x4f8 [c0e9de40] [c00adc60] vprintk_emit+0x188/0x1c4 --- interrupt: c0e9df00 at 0x400f330 LR = init_stack+0x1f00/0x2000 [c0e9de80] [c00ae3c4] printk+0xa8/0xcc (unreliable) [c0e9df20] [c0c27e44] early_irq_init+0x38/0x108 [c0e9df50] [c0c15434] start_kernel+0x310/0x488 [c0e9dff0] [00003484] 0x3484 With this patch the trace becomes: Call Trace: [c0e9dca0] [c01c42c0] print_address_description+0x64/0x2bc (unreliable) [c0e9dcd0] [c01c46a4] kasan_report+0xfc/0x180 [c0e9dd10] [c0895150] memchr+0x24/0x74 [c0e9dd30] [c00a9e58] msg_print_text+0x124/0x574 [c0e9dde0] [c00ab730] console_unlock+0x114/0x4f8 [c0e9de40] [c00adc80] vprintk_emit+0x188/0x1c4 [c0e9de80] [c00ae3e4] printk+0xa8/0xcc [c0e9df20] [c0c27e44] early_irq_init+0x38/0x108 [c0e9df50] [c0c15434] start_kernel+0x310/0x488 [c0e9dff0] [00003484] 0x3484 Cc: stable@vger.kernel.org Signed-off-by:
-
