Skip to content

L
linux
Switch branch/tag
  1. 20 Oct, 2021 5 commits
  3. 19 Oct, 2021 12 commits
    • Arnd Bergmann's avatar
      Merge tag 'stm32-dt-for-v5.16-1' of... · ef5dcb1b
      Arnd Bergmann authored 
      Merge tag 'stm32-dt-for-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT for v5.16, round 1

Highlights:
----------

- MPU:
 - ST boards:
  - Add new stm32mp135f-dk board. It embedds new STM32MP135 SoC,
    with 512 MB of DDR3. Several connections are available on this
    board:
    4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI,
    Combo Wifi/BT, ...
    Only SD card, uart4 (console) and watchdog IPs are enabled in
    this tag.
  - Change IRQ level for STUSB1600 on DKx boards.
  - Fix SAI subclocks range.
  - Add ck_usb0_48m clock in USB OHCI node device to match with
    STM32MP15 datasheet.

 - DH boards:
  - Reduce DHCOR SPI NOR frequency to 50 MHz to avoid sporadic issues.
  - Fix SAI pin muxing.

 - Odyssey:
  - Set DCMI pins.

* tag 'stm32-dt-for-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151
  ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
  ARM: dts: stm32: fix SAI sub nodes register range
  ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx
  ARM: dts: stm32: set the DCMI pins on stm32mp157c-odyssey
  ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz
  ARM: dts: stm32: add initial support of stm32mp135f-dk board
  dt-bindings: stm32: document stm32mp135f-dk board
  ARM: dts: stm32: add STM32MP13 SoCs support

Link: https://lore.kernel.org/r/9d52c3e2-a3b9-89f3-1896-7cd3560e7010@foss.st.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      ef5dcb1b
    • Arnd Bergmann's avatar
      Merge tag 'renesas-arm-dt-for-v5.16-tag2' of... · f97ee3e9
      Arnd Bergmann authored 
      Merge tag 'renesas-arm-dt-for-v5.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.16 (take two)

  - SPI Multi I/O Bus, SDHI, and Ethernet support for the RZ/G2L SoC,
  - SPI Multi I/O Bus, camera, and video-on support for the R-Car V3U
    SoC,
  - SPI FLASH support for the Falcon development board,
  - eMMC, microSD, and Ethernet support for the RZ/G2L SMARC EVK
    development board,
  - 2 GHz High-Performance support for the R-Car H3e-2G, M3e-2G, and
    M3Ne-2G SoCs,
  - Miscellaneous fixes and improvements.

* tag 'renesas-arm-dt-for-v5.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  mailmap: Fix text encoding for Niklas Söderlund
  arm64: dts: renesas: rcar-gen3e: Add Cortex-A57 2 GHz opps
  arm64: dts: renesas: rzg2l-smarc-som: Enable Ethernet
  arm64: dts: renesas: r9a07g044: Add GbEthernet nodes
  arm64: dts: renesas: Add ports node to all adv7482 nodes
  arm64: dts: renesas: r8a779a0: Add and connect all CSI-2, ISP and VIN nodes
  arm64: dts: renesas: rzg2l-smarc: Enable microSD on SMARC platform
  arm64: dts: renesas: rzg2l-smarc-som: Enable eMMC on SMARC platform
  arm64: dts: renesas: r9a07g044: Add SDHI nodes
  arm64: dts: renesas: falcon-cpu: Add SPI flash via RPC
  arm64: dts: renesas: r8a779a0: Add RPC node
  arm64: dts: renesas: r9a07g044: Add SPI Multi I/O Bus controller node

Link: https://lore.kernel.org/r/cover.1634298094.git.geert+renesas@glider.beSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      f97ee3e9
    • Arnd Bergmann's avatar
      Merge tag 'aspeed-5.16-devicetree' of... · f6bfe014
      Arnd Bergmann authored 
      Merge tag 'aspeed-5.16-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt

ASPEED device tree updates for 5.15

 - New machines:

  * TYAN S7106 BMC, a x86 server from about four years ago

 - Descriptions for the AST2600 ADC, which now has an upstream driver

 - Lots of GPIO line names. The OpenBMC project has adopted a scheme for
   naming the lines, and new additions will follow this guide

 - New I2C devices for Rainier, Everest, EthanolX, Mt Jade

 - Fixes for fp5280g2 which has seen some recent development, including
   the addtion of a QEmu machine for testing

* tag 'aspeed-5.16-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
  ARM: dts: aspeed: fp5280g2: Use the 64M layout
  ARM: dts: aspeed: Add TYAN S7106 BMC machine
  ARM: dts: aspeed: rainier: Add power-config-full-load gpio
  ARM: dts: aspeed: p10bmc: Define secure boot gpio
  ARM: dts: aspeed: mtjade: Add some gpios
  ARM: dts: aspeed: Add ADC for AST2600 and enable for Rainier and Everest
  ARM: dts: everest: Define name for gpio line B6
  ARM: dts: everest: Define name for gpio line Q2
  ARM: dts: rainier: Define name for gpio line Q2
  ARM: dts: everest: Add 'factory-reset-toggle' as GPIOF6
  ARM: dts: aspeed: everest: Add I2C bus 15 muxes
  ARM: dts: aspeed: rainier: Add system LEDs
  ARM: dts: aspeed: amd-ethanolx: Add FRU EEPROM
  ARM: dts: fp5280g2: Enable KCS 3 for MCTP binding

Link: https://lore.kernel.org/r/CACPK8XdrMzY9tzdof7KpzxKquTo7GcWW4N9Zqwtmmu73C7htXA@mail.gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      f6bfe014
    • Arnd Bergmann's avatar
      Merge tag 'hisi-arm64-dt-for-5.16' of git://github.com/hisilicon/linux-hisi into arm/dt · 6fa496fd
      Arnd Bergmann authored 
      ARM64: DT: HiSilicon ARM64 DT updates for 5.16

- Add SPMI PMIC support for the Hikey970 board
- Correct the sp805 watchdog compatible string to match the document
- Correct the operating-points table name to match the dtschema

* tag 'hisi-arm64-dt-for-5.16' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hisilicon: align operating-points table name with dtschema
  arm64: dts: hisilicon: fix arm,sp805 compatible string
  arm64: dts: hisilicon: Add support for Hikey 970 PMIC

Link: https://lore.kernel.org/r/6168EB53.60503@hisilicon.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      6fa496fd
    • Arnd Bergmann's avatar
      Merge tag 'ux500-dts-for-v5.16' of... · 514d5078
      Arnd Bergmann authored 
      Merge tag 'ux500-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt

Ux500 DTS updates:

- Flag the janice SPI display lines properly for the right line
  semantics.
- Fix some errors in the Skomer regulator configuration.
- Fix some SD card pin configurations on Skomer.
- Assign the Skomer SD card a 300 ms power-on delay.
- Rewrite the battery nodes to use the standard binding
  "monitored-battery" as used in the updated bindings, and
  provide the right Samsung battery compatibles for the Samsung
  phones.

* tag 'ux500-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: ux500: Switch battery nodes to standard
  ARM: dts: ux500: Skomer eMMC needs 300 ms power on
  ARM: dts: ux500: Fix up SD card pin config
  ARM: dts: ux500: Skomer regulator fixes
  ARM: dts: ux500: Tag Janice display SPI correct

Link: https://lore.kernel.org/r/CACRpkdYf5GwRvG1Gemk4mE+aw6UnAVTY8OudwsVNPQXThHXu6g@mail.gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      514d5078
    • Arnd Bergmann's avatar
      Merge tag 'arm-soc/for-5.16/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt · 4f0c2be3
      Arnd Bergmann authored 
      This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.16, please pull the following:

- Rafal updates the BCM4908 DTS files to produce fewer warnings by
fixing the UART clock name, moving the reboot syscon node out of the bus
node, and finally updating the NAND controller node names.

* tag 'arm-soc/for-5.16/devicetree-arm64' of https://github.com/Broadcom/stblinux:
  arm64: dts: broadcom: bcm4908: Fix UART clock name
  arm64: dts: broadcom: bcm4908: Move reboot syscon out of bus
  arm64: dts: broadcom: bcm4908: Fix NAND node name

Link: https://lore.kernel.org/r/20211013174016.831348-2-f.fainelli@gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      4f0c2be3
    • Arnd Bergmann's avatar
      Merge tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux into arm/dt · 4d3e49a3
      Arnd Bergmann authored 
      This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.16, please pull the following:

- Matthew provides a set of updates to the Northstar Plus Device Tree
files to fix a number of warnings, and prepare the files to support the
addition of the Cisco Meraki MX64/MX65 wireless controller devices and
finally adds support for those boards.

- Rafal continues to provide updates to the BCM5301X Device Tree files
in order to fix warnings with the various node names, MDIO muxes and
memory nodes. He also adds support for the external switches on the
BCM53573 SoC and adds Tenda AC9 switch ports.

- Christian provides the description of the Ethernet switch ports for
the Cisco Meraki MR32 based on the 53016 SoC

- Arinc adds support for the Asus RT-AC88U device based on the BCM4709
and featuring 8 Ethernet ports over the integrated and the external
Realtek switch (not supported yet)

- Stefan adds support for the Raspberry Pi Compute Module 4 IO board and
does a number of preparatory changes to get there to the Device Tree
files before doing the actual addition

* tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux: (31 commits)
  arm64: dts: broadcom: Add reference to RPi CM4 IO Board
  ARM: dts: Add Raspberry Pi Compute Module 4 IO Board
  ARM: dts: Add Raspberry Pi Compute Module 4
  dt-bindings: arm: bcm2835: Add Raspberry Pi Compute Module 4
  ARM: dts: bcm283x-rpi: Move Wifi/BT into separate dtsi
  dt-bindings: display: bcm2835: add optional property power-domains
  ARM: dts: BCM5301X: Add DT for Asus RT-AC88U
  ARM: BCM53016: MR32: get mac-address from nvmem
  ARM: BCM53016: Specify switch ports for Meraki MR32
  ARM: dts: BCM53573: Add Tenda AC9 switch ports
  ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch
  ARM: dts: BCM5301X: Specify switch ports for more devices
  ARM: dts: NSP: Fix MX65 MDIO mux warnings
  ARM: dts: NSP: Fix MX64/MX65 eeprom node name
  ARM: dts: NSP: Fix MDIO mux node names
  ARM: dts: NSP: Fix mpcore, mmc node names
  ARM: dts: NSP: Add bcm958623hr board name to dts
  ARM: dts: BCM5301X: Fix memory nodes names
  ARM: dts: BCM5301X: Fix MDIO mux binding
  ARM: dts: BCM5301X: Fix nodes names
  ...

Link: https://lore.kernel.org/r/20211013174016.831348-1-f.fainelli@gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      4d3e49a3
    • Arnd Bergmann's avatar
      Merge tag 'samsung-dt64-5.16' of... · f202bd97
      Arnd Bergmann authored 
      Merge tag 'samsung-dt64-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM64 changes for v5.16

1. Match Exynos5433 DTS with dtschema.
2. Add an Exynos Auto v9 SoC and SADK board. The Exynos Auto v9 is a
   design for automotive for In-vehicle Infotainments (IVI) and Advanced
   Driver-Assistance Systems (ADAS).
   This pull request brings very basic support (pinctrl, UART and UFS
   storage) with a development SADK (Samsung Automotive Development Kit)
   board.

* tag 'samsung-dt64-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: add minimal support for exynosautov9 sadk board
  arm64: dts: exynos: add initial support for exynosautov9 SoC
  arm64: dts: exynos: add proper comaptible FSYS syscon in Exynos5433
  arm64: dts: exynos: align operating-points table name with dtschema in Exynos5433

Link: https://lore.kernel.org/r/20211013162418.43072-2-krzysztof.kozlowski@canonical.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      f202bd97
    • Arnd Bergmann's avatar
      Merge tag 'samsung-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt · 54dd3834
      Arnd Bergmann authored 
      Samsung DTS ARM changes for v5.16

Minor cleanups - from undocumented or unused properties, coding style.

* tag 'samsung-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: use spaces instead of tabs around '='
  ARM: dts: exynos: remove unneeded DVS voltages from PMIC on Arndale
  ARM: dts: exynos: drop undocumented samsung,sata-freq property in Exynos5250

Link: https://lore.kernel.org/r/20211013162418.43072-1-krzysztof.kozlowski@canonical.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      54dd3834
    • Arnd Bergmann's avatar
      Merge tag 'qcom-arm64-for-5.16' of... · c7613530
      Arnd Bergmann authored 
      Merge tag 'qcom-arm64-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 dts updates for v5.16

MSM8916 gained some DT cleanup fixes. The Dragonboard 410c gains updated
firmware paths to the device specific firmware for modem and WiFi, to
allow these to be pushed to linux-next. The Longcheer L8150 gains extcon
support and the interrupt configuration for the accelerometer and
magnetometer are corrected.

MSM8998 gained descriptions for the multimedia clock controller and
iommu, as well as the GPU and its dedicated IOMMU. The QFPROM node is
updated to access the CRC corrected value space, the white LED (for
backlight) found in PMI8998 is described and GCC gains references to the
missing XO and sleep_clk reference clocks.
On top of this initial support for the Fxtec Pro1 QX1000 is added and
then the Sony Xperia XZ1, Xperia XZ1 Compact and the Xperia XZ Premium,
with USB, touchscreen, SDHCI, Bluetooth and vibrator supported.

The Xiaomi Mi 5 and Xiaomi Mi Note 2, based on the MSM8996 platform was
added, with support for frame buffer, GPU, audio, video encoder/decoder
and touchscreen.

The USB controller and PHY found in IPA6018 is described to provide USB
support. IPQ8074 gains a description of the SPMI controller.

The highlight on SC7180 is the introduction of the just released
"Homestar" device.  CPU power coefficients are corrected based on
measurements, IMEM is described to ensure that remoteproc relocation
information is carried to post mortem debug tools and a few smaller
fixes are introduced.

The SC7280 gains QSPI, low speed (i2c/spi/uart), GPU, thermal zones,
modem, CPU topology and updated memory map.

On SDM845 the "Limits hardware" is described and increases the
throttling temperature of the hardware from ~70C to 95C, with up to 30%
improvement in benchmarks as result.  Relying on hardware throttling and
thermal pressure, the CPU cooling devices are dropped.
The power for the second WiFi channel is properly described for the
Lenovo Yoga C630, to ensure they are both powered.

reboot-modes are defined for the PM660 PMIC, found in SDM630 and SDM660.

Initial support for the Snapdragon 690 (aka SM6350) is introduced, with
support for clocks, regulators, pinctrl, storage, thermal sensors, USB,
SMMU and CPUfreq. On top of this support for the Sony Xperia 10 III is
introduced.

* tag 'qcom-arm64-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (99 commits)
  arm64: dts: qcom: sdm630-nile: Correct regulator label name
  arm64: dts: qcom: sm6125: Improve indentation of multiline properties
  arm64: dts: qcom: msm8916-longcheer-l8150: Use &pm8916_usbin extcon
  arm64: dts: qcom: pm8916: Add pm8941-misc extcon for USB detection
  arm64: dts: qcom: pm8916: Remove wrong reg-names for rtc@6000
  arm64: dts: qcom: sc7280: Update Q6V5 MSS node
  arm64: dts: qcom: sc7280: Add Q6V5 MSS node
  arm64: dts: qcom: sc7280: Add nodes to boot modem
  arm64: dts: qcom: sc7280: Add/Delete/Update reserved memory nodes
  arm64: dts: qcom: sc7280: Update reserved memory map
  arm64: dts: qcom: msm8998-fxtec-pro1: Add tlmm keyboard keys
  arm64: dts: qcom: msm8998-fxtec-pro1: Add Goodix GT9286 touchscreen
  arm64: dts: qcom: msm8998-fxtec-pro1: Add physical keyboard leds
  arm64: dts: qcom: Add support for MSM8998 F(x)tec Pro1 QX1000
  arm64: dts: qcom: msm8916: Fix Secondary MI2S bit clock
  arm64: dts: qcom: msm8916-longcheer-l8150: Add missing sensor interrupts
  arm64: dts: qcom: sc7180: Add IMEM and pil info regions
  arm64: dts: qcom: pm6150l: Add missing include
  arm64: dts: qcom: sm6350: Add device tree for Sony Xperia 10 III
  arm64: dts: qcom: sm6350: Add apps_smmu and assign iommus prop to USB1
  ...

Link: https://lore.kernel.org/r/20211012231155.1036519-1-bjorn.andersson@linaro.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      c7613530
    • Arnd Bergmann's avatar
      Merge tag 'qcom-dts-for-5.16' of... · 878e26d3
      Arnd Bergmann authored 
      Merge tag 'qcom-dts-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm DTS updates for v5.16

This extends the previous limited description of MSM8226 with SDHC,
UART, I2C, SCM, SMEM, RPM and basic PMIC definitions. Based on this,
initial support for the LG G Watch R smartwatch is introduced.

APQ8064 gets a couple of DT updates, one which will allow the GPU driver
to drop supporting legacy "opp tables" in the future.

DT bindings and DTS files are updated with additional compatibles, for
completeness.

* tag 'qcom-dts-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  dt-bindings: arm: qcom, add missing devices
  ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHY
  ARM: dts: qcom: fill secondary compatible for multiple boards
  ARM: dts: qcom: apq8064: adjust memory node according to specs
  ARM: dts: qcom: apq8064: Convert adreno from legacy gpu-pwrlevels to opp-v2
  ARM: dts: qcom: Add support for LG G Watch R
  dt-bindings: arm: qcom: Document APQ8026 SoC binding
  ARM: dts: qcom: Add pm8226 PMIC
  ARM: dts: qcom: msm8226: Add more SoC bits
  dt-bindings: arm: qcom: Document SDX65 platform and boards

Link: https://lore.kernel.org/r/20211012174310.1017857-1-bjorn.andersson@linaro.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      878e26d3
    • Arnd Bergmann's avatar
      Merge tag 'v5.15-next-dts64' of... · ba232d39
      Arnd Bergmann authored 
      Merge tag 'v5.15-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

Biggest change is, that we have now support for a reset controller inside the
mmsys. This goes inhand with changes to the driver, that you will find in the
soc pull request.

Mediatek PCI device tree binding described the root port in a wrong. The IP
actaully implements several root complex with everyone having a single root port.

We need to fix the DT in an incompatible way to describe the HW as it is. This
also fixes a problem that no IRQ bigger then 32 could be handled.

The only public available HW that is affected by this is the BananaPi R64. I'm
not aware that there is a big user base using the upstream kernel. In this
boards PCI is only used for extension cards, so I don't expect any boot problems.

- mt8173: add reset for dsi0 to mmsys
- move dt-bindings reset controller includes to correct folder
- split PCIe node to use new format for mt2712 and mt7622
- mt8183: add audio node to chromebook devices
- mt8192: add clock controller node

* tag 'v5.15-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0
  arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0
  dt-bindings: display: mediatek: add dsi reset optional property
  dt-bindings: mediatek: Add #reset-cells to mmsys system controller
  arm64: dts: mediatek: Move reset controller constants into common location
  arm64: dts: mediatek: Split PCIe node for MT2712 and MT7622
  arm64: dts: mt8183: add kukui platform audio node
  arm64: dts: mt8183: add audio node
  arm64: dts: mediatek: Add mt8192 clock controllers

Link: https://lore.kernel.org/r/1a3d63a3-c020-3319-26f6-a2ec338cc42e@gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      ba232d39
  5. 15 Oct, 2021 23 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7