- 22 Sep, 2022 40 commits
-
-
Vadim Fedorenko authored
Any change to the hardware timestamps configuration triggers nic restart, which breaks transmition and reception of network packets for a while. But there is no need to fully restart the device because while configuring hardware timestamps. The code for changing configuration runs after all of the initialisation, when the NIC is actually up and running. This patch changes the code that ioctl will only update configuration registers and will not trigger carrier status change, but in case of timestamps for all rx packetes it fallbacks to close()/open() sequnce because of synchronization issues in the hardware. Tested on BCM57504. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220922191038.29921-1-vfedorenko@novek.ruSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
drivers/net/ethernet/freescale/fec.h 7b15515f ("Revert "fec: Restart PPS after link state change"") 40c79ce1 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561b ("pinctrl: ocelot: Fix interrupt controller") 181f604b ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d9 ("net: Add tests for bonding and team address list management") 152e8ec7 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/Signed-off-by:
-
Horatiu Vultur authored
Inside the function lan8814_config_intr, there are double spaces when assigning the return value of phy_write to err. Suggested-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220921065444.637067-1-horatiu.vultur@microchip.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from wifi, netfilter and can. A handful of awaited fixes here - revert of the FEC changes, bluetooth fix, fixes for iwlwifi spew. We added a warning in PHY/MDIO code which is triggering on a couple of platforms in a false-positive-ish way. If we can't iron that out over the week we'll drop it and re-add for 6.1. I've added a new "follow up fixes" section for fixes to fixes in 6.0-rcs but it may actually give the false impression that those are problematic or that more testing time would have caught them. So likely a one time thing. Follow up fixes: - nf_tables_addchain: fix nft_counters_enabled underflow - ebtables: fix memory leak when blob is malformed - nf_ct_ftp: fix deadlock when nat rewrite is needed Current release - regressions: - Revert "fec: Restart PPS after link state change" and the related "net: fec: Use a spinlock to guard `fep->ptp_clk_on`" - Bluetooth: fix HCIGETDEVINFO regression - wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2 - mptcp: fix fwd memory accounting on coalesce - rwlock removal fall out: - ipmr: always call ip{,6}_mr_forward() from RCU read-side critical section - ipv6: fix crash when IPv6 is administratively disabled - tcp: read multiple skbs in tcp_read_skb() - mdio_bus_phy_resume state warning fallout: - eth: ravb: fix PHY state warning splat during system resume - eth: sh_eth: fix PHY state warning splat during system resume Current release - new code bugs: - wifi: iwlwifi: don't spam logs with NSS>2 messages - eth: mtk_eth_soc: enable XDP support just for MT7986 SoC Previous releases - regressions: - bonding: fix NULL deref in bond_rr_gen_slave_id - wifi: iwlwifi: mark IWLMEI as broken Previous releases - always broken: - nf_conntrack helpers: - irc: tighten matching on DCC message - sip: fix ct_sip_walk_headers - osf: fix possible bogus match in nf_osf_find() - ipvlan: fix out-of-bound bugs caused by unset skb->mac_header - core: fix flow symmetric hash - bonding, team: unsync device addresses on ndo_stop - phy: micrel: fix shared interrupt on LAN8814" * tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) selftests: forwarding: add shebang for sch_red.sh bnxt: prevent skb UAF after handing over to PTP worker net: marvell: Fix refcounting bugs in prestera_port_sfp_bind() net: sched: fix possible refcount leak in tc_new_tfilter() net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD udp: Use WARN_ON_ONCE() in udp_read_skb() selftests: bonding: cause oops in bond_rr_gen_slave_id bonding: fix NULL deref in bond_rr_gen_slave_id net: phy: micrel: fix shared interrupt on LAN8814 net/smc: Stop the CLC flow if no link to map buffers on ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficient net: atlantic: fix potential memory leak in aq_ndev_close() can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported can: gs_usb: gs_can_open(): fix race dev->can.state condition can: flexcan: flexcan_mailbox_read() fix return value for drop = true net: sh_eth: Fix PHY state warning splat during system resume net: ravb: Fix PHY state warning splat during system resume netfilter: nf_ct_ftp: fix deadlock when nat rewrite is needed netfilter: ebtables: fix memory leak when blob is malformed netfilter: nf_tables: fix percpu memory leak at nf_tables_addchain() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fixes from Ard Biesheuvel: - Use the right variable to check for shim insecure mode - Wipe setup_data field when booting via EFI - Add missing error check to efibc driver * tag 'efi-urgent-for-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: libstub: check Shim mode using MokSBStateRT efi: x86: Wipe setup_data on pure EFI boot efi: efibc: Guard against allocation failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: - fix a NULL-pointer dereference at driver unbind and a potential resource leak in error path in gpio-mockup - make the irqchip immutable in gpio-ftgpio010 - fix dereferencing a potentially uninitialized variable in gpio-tqmx86 - fix interrupt registering in gpiolib's character device code * tag 'gpio-fixes-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: cdev: Set lineevent_state::irq after IRQ register successfully gpio: tqmx86: fix uninitialized variable girq gpio: ftgpio010: Make irqchip immutable gpio: mockup: Fix potential resource leakage when register a chip gpio: mockup: fix NULL pointer dereference when removing debugfs
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.0-2022-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix polling of system-wide events related to mixing per-cpu and per-thread events. - Do not check if /proc/modules is unchanged when copying /proc/kcore, that doesn't get in the way of post processing analysis. - Include program header in ELF files generated for JIT files, so that they can be opened by tools using elfutils libraries. - Enter namespaces when synthesizing build-ids. - Fix some bugs related to a recent cpu_map overhaul where we should be using an index and not the cpu number. - Fix BPF program ELF section name, using the naming expected by libbpf when using BPF counters in 'perf stat'. - Add a new test for perf stat cgroup BPF counter. - Adjust check on 'perf test wp' for older kernels, where the PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl isn't supported. - Sync x86 cpufeatures with the kernel sources, no changes in tooling. * tag 'perf-tools-fixes-for-v6.0-2022-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Honor namespace when synthesizing build-ids tools headers cpufeatures: Sync with the kernel sources perf kcore_copy: Do not check /proc/modules is unchanged libperf evlist: Fix polling of system-wide events perf record: Fix cpu mask bit setting for mixed mmaps perf test: Skip wp modify test on old kernels perf jit: Include program header in ELF files perf test: Add a new test for perf stat cgroup BPF counter perf stat: Use evsel->core.cpus to iterate cpus in BPF cgroup counters perf stat: Fix cpu map index in bperf cgroup code perf stat: Fix BPF program section name
-
Hangbin Liu authored
RHEL/Fedora RPM build checks are stricter, and complain when executable files don't have a shebang line, e.g. *** WARNING: ./kselftests/net/forwarding/sch_red.sh is executable but has no shebang, removing executable bit Fix it by adding shebang line. Fixes: 6cf0291f ("selftests: forwarding: Add a RED test for SW datapath") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20220922024453.437757-1-liuhangbin@gmail.comSigned-off-by:
-
Jakub Kicinski authored
When reading the timestamp is required bnxt_tx_int() hands over the ownership of the completed skb to the PTP worker. The skb should not be used afterwards, as the worker may run before the rest of our code and free the skb, leading to a use-after-free. Since dev_kfree_skb_any() accepts NULL make the loss of ownership more obvious and set skb to NULL. Fixes: 83bb623c ("bnxt_en: Transmit and retrieve packet timestamps") Reviewed-by:
Andy Gospodarek <gospo@broadcom.com> Reviewed-by:
-
Liang He authored
In prestera_port_sfp_bind(), there are two refcounting bugs: (1) we should call of_node_get() before of_find_node_by_name() as it will automaitcally decrease the refcount of 'from' argument; (2) we should call of_node_put() for the break of the iteration for_each_child_of_node() as it will automatically increase and decrease the 'child'. Fixes: 52323ef7 ("net: marvell: prestera: add phylink support") Signed-off-by:
Liang He <windhl@126.com> Reviewed-by:
Yevhen Orlov <yevhen.orlov@plvision.eu> Link: https://lore.kernel.org/r/20220921133245.4111672-1-windhl@126.comSigned-off-by:
-
Alexandru Tachici authored
MII_BUS_ID_SIZE is larger than MAX_PHYS_ITEM_ID_LEN so we use the former here to set the parent port id. Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by:
Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20220922063049.10388-1-alexandru.tachici@analog.comSigned-off-by:
-
Hangyu Hua authored
tfilter_put need to be called to put the refount got by tp->ops->get to avoid possible refcount leak when chain->tmplt_ops != NULL and chain->tmplt_ops != tp->ops. Fixes: 7d5509fa ("net: sched: extend proto ops with 'put' callback") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Reviewed-by:
Vlad Buslov <vladbu@nvidia.com> Link: https://lore.kernel.org/r/20220921092734.31700-1-hbh25y@gmail.comSigned-off-by:
-
Sean Anderson authored
There is a separate receive path for small packets (under 256 bytes). Instead of allocating a new dma-capable skb to be used for the next packet, this path allocates a skb and copies the data into it (reusing the existing sbk for the next packet). There are two bytes of junk data at the beginning of every packet. I believe these are inserted in order to allow aligned DMA and IP headers. We skip over them using skb_reserve. Before copying over the data, we must use a barrier to ensure we see the whole packet. The current code only synchronizes len bytes, starting from the beginning of the packet, including the junk bytes. However, this leaves off the final two bytes in the packet. Synchronize the whole packet. To reproduce this problem, ping a HME with a payload size between 17 and 214 $ ping -s 17 <hme_address> which will complain rather loudly about the data mismatch. Small packets (below 60 bytes on the wire) do not have this issue. I suspect this is related to the padding added to increase the minimum packet size. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Sean Anderson <seanga2@gmail.com> Reviewed-by:
-
Peilin Ye authored
Prevent udp_read_skb() from flooding the syslog. Suggested-by:
Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
Peilin Ye <peilin.ye@bytedance.com> Link: https://lore.kernel.org/r/20220921005915.2697-1-yepeilin.cs@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Jonathan Toppins says: ==================== bonding: fix NULL deref in bond_rr_gen_slave_id Fix a NULL dereference of the struct bonding.rr_tx_counter member because if a bond is initially created with an initial mode != zero (Round Robin) the memory required for the counter is never created and when the mode is changed there is never any attempt to verify the memory is allocated upon switching modes. ==================== Link: https://lore.kernel.org/r/cover.1663694476.git.jtoppins@redhat.comSigned-off-by:
-
Jonathan Toppins authored
This bonding selftest used to cause a kernel oops on aarch64 and should be architectures agnostic. Signed-off-by:
Jonathan Toppins <jtoppins@redhat.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Jonathan Toppins authored
Fix a NULL dereference of the struct bonding.rr_tx_counter member because if a bond is initially created with an initial mode != zero (Round Robin) the memory required for the counter is never created and when the mode is changed there is never any attempt to verify the memory is allocated upon switching modes. This causes the following Oops on an aarch64 machine: [ 334.686773] Unable to handle kernel paging request at virtual address ffff2c91ac905000 [ 334.694703] Mem abort info: [ 334.697486] ESR = 0x0000000096000004 [ 334.701234] EC = 0x25: DABT (current EL), IL = 32 bits [ 334.706536] SET = 0, FnV = 0 [ 334.709579] EA = 0, S1PTW = 0 [ 334.712719] FSC = 0x04: level 0 translation fault [ 334.717586] Data abort info: [ 334.720454] ISV = 0, ISS = 0x00000004 [ 334.724288] CM = 0, WnR = 0 [ 334.727244] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000008044d662000 [ 334.733944] [ffff2c91ac905000] pgd=0000000000000000, p4d=0000000000000000 [ 334.740734] Internal error: Oops: 96000004 [#1] SMP [ 334.745602] Modules linked in: bonding tls veth rfkill sunrpc arm_spe_pmu vfat fat acpi_ipmi ipmi_ssif ixgbe igb i40e mdio ipmi_devintf ipmi_msghandler arm_cmn arm_dsu_pmu cppc_cpufreq acpi_tad fuse zram crct10dif_ce ast ghash_ce sbsa_gwdt nvme drm_vram_helper drm_ttm_helper nvme_core ttm xgene_hwmon [ 334.772217] CPU: 7 PID: 2214 Comm: ping Not tainted 6.0.0-rc4-00133-g64ae13ed #4 [ 334.779950] Hardware name: GIGABYTE R272-P31-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021 [ 334.789244] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 334.796196] pc : bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.801691] lr : bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.807962] sp : ffff8000221733e0 [ 334.811265] x29: ffff8000221733e0 x28: ffffdbac8572d198 x27: ffff80002217357c [ 334.818392] x26: 000000000000002a x25: ffffdbacb33ee000 x24: ffff07ff980fa000 [ 334.825519] x23: ffffdbacb2e398ba x22: ffff07ff98102000 x21: ffff07ff981029c0 [ 334.832646] x20: 0000000000000001 x19: ffff07ff981029c0 x18: 0000000000000014 [ 334.839773] x17: 0000000000000000 x16: ffffdbacb1004364 x15: 0000aaaabe2f5a62 [ 334.846899] x14: ffff07ff8e55d968 x13: ffff07ff8e55db30 x12: 0000000000000000 [ 334.854026] x11: ffffdbacb21532e8 x10: 0000000000000001 x9 : ffffdbac857178ec [ 334.861153] x8 : ffff07ff9f6e5a28 x7 : 0000000000000000 x6 : 000000007c2b3742 [ 334.868279] x5 : ffff2c91ac905000 x4 : ffff2c91ac905000 x3 : ffff07ff9f554400 [ 334.875406] x2 : ffff2c91ac905000 x1 : 0000000000000001 x0 : ffff07ff981029c0 [ 334.882532] Call trace: [ 334.884967] bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.890109] bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.896033] __bond_start_xmit+0x128/0x3a0 [bonding] [ 334.901001] bond_start_xmit+0x54/0xb0 [bonding] [ 334.905622] dev_hard_start_xmit+0xb4/0x220 [ 334.909798] __dev_queue_xmit+0x1a0/0x720 [ 334.913799] arp_xmit+0x3c/0xbc [ 334.916932] arp_send_dst+0x98/0xd0 [ 334.920410] arp_solicit+0xe8/0x230 [ 334.923888] neigh_probe+0x60/0xb0 [ 334.927279] __neigh_event_send+0x3b0/0x470 [ 334.931453] neigh_resolve_output+0x70/0x90 [ 334.935626] ip_finish_output2+0x158/0x514 [ 334.939714] __ip_finish_output+0xac/0x1a4 [ 334.943800] ip_finish_output+0x40/0xfc [ 334.947626] ip_output+0xf8/0x1a4 [ 334.950931] ip_send_skb+0x5c/0x100 [ 334.954410] ip_push_pending_frames+0x3c/0x60 [ 334.958758] raw_sendmsg+0x458/0x6d0 [ 334.962325] inet_sendmsg+0x50/0x80 [ 334.965805] sock_sendmsg+0x60/0x6c [ 334.969286] __sys_sendto+0xc8/0x134 [ 334.972853] __arm64_sys_sendto+0x34/0x4c [ 334.976854] invoke_syscall+0x78/0x100 [ 334.980594] el0_svc_common.constprop.0+0x4c/0xf4 [ 334.985287] do_el0_svc+0x38/0x4c [ 334.988591] el0_svc+0x34/0x10c [ 334.991724] el0t_64_sync_handler+0x11c/0x150 [ 334.996072] el0t_64_sync+0x190/0x194 [ 334.999726] Code: b9001062 f9403c02 d53cd044 8b040042 (b8210040) [ 335.005810] ---[ end trace 0000000000000000 ]--- [ 335.010416] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 335.017279] SMP: stopping secondary CPUs [ 335.021374] Kernel Offset: 0x5baca8eb0000 from 0xffff800008000000 [ 335.027456] PHYS_OFFSET: 0x80000000 [ 335.030932] CPU features: 0x0000,0085c029,19805c82 [ 335.035713] Memory Limit: none [ 335.038756] Rebooting in 180 seconds.. The fix is to allocate the memory in bond_open() which is guaranteed to be called before any packets are processed. Fixes: 848ca918 ("net: bonding: Use per-cpu rr_tx_counter") CC: Jussi Maki <joamaki@gmail.com> Signed-off-by: -
Michael Walle authored
Since commit ece19502 ("net: phy: micrel: 1588 support for LAN8814 phy") the handler always returns IRQ_HANDLED, except in an error case. Before that commit, the interrupt status register was checked and if it was empty, IRQ_NONE was returned. Restore that behavior to play nice with the interrupt line being shared with others. Fixes: ece19502 ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
Divya Koppera <Divya.Koppera@microchip.com> Link: https://lore.kernel.org/r/20220920141619.808117-1-michael@walle.ccSigned-off-by:
-
Paolo Abeni authored
Lorenzo Bianconi says: ==================== Add WED support for MT7986 chipset Similar to MT7622, introduce Wireless Ethernet Dispatch (WED) support for MT7986 chipset in order to offload to the hw packet engine traffic received from LAN/WAN device to WLAN nic (MT7915E). ==================== Link: https://lore.kernel.org/r/cover.1663668203.git.lorenzo@kernel.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Lorenzo Bianconi authored
Introduce hw flow offload support for mt7986 chipset. PPE is not enabled yet in mt7986 since mt76 support is not available yet. Tested-by:
Daniel Golle <daniel@makrotopia.org> Co-developed-by:
Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by:
Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Other than pcie bus, introduce support for axi bus to mtk wed driver. Axi bus is used to connect mt7986-wmac soc chip available on mt7986 device. Tested-by:
-
Lorenzo Bianconi authored
Introduce Wireless Etherne Dispatcher support on transmission side for mt7986 chipset Tested-by:
-
Lorenzo Bianconi authored
Introduce mtk_wed_configure_irq, mtk_wed_dma_enable and mtk_wed_dma_disable utility routines. This is a preliminary patch to introduce mt7986 wed support. Tested-by:
-
Lorenzo Bianconi authored
Introduce foe_entry_size to mtk_eth_soc data structure since mt7986 relies on a bigger mtk_foe_entry data structure. Tested-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to introduce mt7986 wed support. Tested-by:
-
Lorenzo Bianconi authored
mt7986 chipset support multiple packet engines for wlan <-> eth packet forwarding. Tested-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to introduce mt7986 hw packet engine. Tested-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to introduce mt7986 hw packet engine. Tested-by:
-
Lorenzo Bianconi authored
Document the binding for the Wireless Ethernet Dispatch core on the MT7986 ethernet driver Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Introduce wed0 and wed1 nodes in order to enable offloading forwarding between ethernet and wireless devices on the mt7986 chipset. Co-developed-by:
-
Paolo Abeni authored
Wen Gu says: ==================== Separate SMC parameter settings from TCP sysctls SMC shares some sysctls with TCP, but considering the difference between these two protocols, it may not be very suitable for SMC to reuse TCP parameter settings in some cases, such as keepalive time or buffer size. So this patch set aims to introduce some SMC specific sysctls to independently and flexibly set the parameters that suit SMC. ==================== Link: https://lore.kernel.org/r/1663667542-119851-1-git-send-email-guwen@linux.alibaba.comSigned-off-by:
-
Tony Lu authored
Currently, SMC uses smc->sk.sk_{rcv|snd}buf to create buffers for send buffer and RMB. And the values of buffer size are from tcp_{w|r}mem in clcsock. The buffer size from TCP socket doesn't fit SMC well. Generally, buffers are usually larger than TCP for SMC-R/-D to get higher performance, for they are different underlay devices and paths. So this patch unbinds buffer size from TCP, and introduces two sysctl knobs to tune them independently. Also, these knobs are per net namespace and work for containers. Signed-off-by:Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
-
Wen Gu authored
SMC-R tests the viability of link by sending out TEST_LINK LLC messages over RoCE fabric when connections on link have been idle for a time longer than keepalive interval (testlink time). But using tcp_keepalive_time as testlink time maybe not quite suitable because it is default no less than two hours[1], which is too long for single link to find peer dead. The active host will still use peer-dead link (QP) sending messages, and can't find out until get IB_WC_RETRY_EXC_ERR error CQEs, which takes more time than TEST_LINK timeout (SMC_LLC_WAIT_TIME) normally. So this patch introduces a independent sysctl for SMC-R to set link keepalive time, in order to detect link down in time. The default value is 30 seconds. [1] https://www.rfc-editor.org/rfc/rfc1122#page-101Signed-off-by:
Wen Gu <guwen@linux.alibaba.com> Signed-off-by:
-
Wen Gu authored
There might be a potential race between SMC-R buffer map and link group termination. smc_smcr_terminate_all() | smc_connect_rdma() -------------------------------------------------------------- | smc_conn_create() for links in smcibdev | schedule links down | | smc_buf_create() | \- smcr_buf_map_usable_links() | \- no usable links found, | (rmb->mr = NULL) | | smc_clc_send_confirm() | \- access conn->rmb_desc->mr[]->rkey | (panic) During reboot and IB device module remove, all links will be set down and no usable links remain in link groups. In such situation smcr_buf_map_usable_links() should return an error and stop the CLC flow accessing to uninitialized mr. Fixes: b9247544 ("net/smc: convert static link ID instances to support multiple links") Signed-off-by: -
Sun Ke authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: fef29982 ("net: altera: tse: convert to phylink") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Sun Ke <sunke32@huawei.com> Link: https://lore.kernel.org/r/20220920020041.2685948-1-sunke32@huawei.comSigned-off-by:
-
Ard Biesheuvel authored
We currently check the MokSBState variable to decide whether we should treat UEFI secure boot as being disabled, even if the firmware thinks otherwise. This is used by shim to indicate that it is not checking signatures on boot images. In the kernel, we use this to relax lockdown policies. However, in cases where shim is not even being used, we don't want this variable to interfere with lockdown, given that the variable may be non-volatile and therefore persist across a reboot. This means setting it once will persistently disable lockdown checks on a given system. So switch to the mirrored version of this variable, called MokSBStateRT, which is supposed to be volatile, and this is something we can check. Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Reviewed-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by:
Peter Jones <pjones@redhat.com>
-
Ard Biesheuvel authored
When booting the x86 kernel via EFI using the LoadImage/StartImage boot services [as opposed to the deprecated EFI handover protocol], the setup header is taken from the image directly, and given that EFI's LoadImage has no Linux/x86 specific knowledge regarding struct bootparams or struct setup_header, any absolute addresses in the setup header must originate from the file and not from a prior loading stage. Since we cannot generally predict where LoadImage() decides to load an image (*), such absolute addresses must be treated as suspect: even if a prior boot stage intended to make them point somewhere inside the [signed] image, there is no way to validate that, and if they point at an arbitrary location in memory, the setup_data nodes will not be covered by any signatures or TPM measurements either, and could be made to contain an arbitrary sequence of SETUP_xxx nodes, which could interfere quite badly with the early x86 boot sequence. (*) Note that, while LoadImage() does take a buffer/size tuple in addition to a device path, which can be used to provide the image contents directly, it will re-allocate such images, as the memory footprint of an image is generally larger than the PE/COFF file representation. Cc: <stable@vger.kernel.org> # v5.10+ Link: https://lore.kernel.org/all/20220904165321.1140894-1-Jason@zx2c4.com/Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski authored
Florian Westphal says: ==================== netfilter patches for net-next Remove GPL license copypastry in uapi files, those have SPDX tags. From Christophe Jaillet. Remove unused variable in rpfilter, from Guillaume Nault. Rework gc resched delay computation in conntrack, from Antoine Tenart. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: rpfilter: Remove unused variable 'ret'. headers: Remove some left-over license text in include/uapi/linux/netfilter/ netfilter: conntrack: revisit the gc initial rescheduling bias netfilter: conntrack: fix the gc rescheduling delay ==================== Link: https://lore.kernel.org/r/20220921095000.29569-1-fw@strlen.deSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-20 (ice) Michal re-sets TC configuration when changing number of queues. Mateusz moves the check and call for link-down-on-close to the specific path for downing/closing the interface. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix interface being down after reset with link-down-on-close flag on ice: config netdev tc before setting queues number ==================== Link: https://lore.kernel.org/r/20220920205344.1860934-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Uwe Kleine-König authored
Usually it's not necessary to declare static functions if the symbols are in the right order. Moving the definition of tsi_eth_driver down in the compilation unit allows to drop two such declarations. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220919131515.885361-1-u.kleine-koenig@pengutronix.deSigned-off-by:
-
