Add SPI Multi I/O Bus controller node to R9A07G044 (RZ/G2L) SoC DTSI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210928155852.32569-1-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Describe all Ethernet PHY reset GPIOs on R-Car Gen3 boards, to avoid
relying solely on boot loaders to bring PHYs out of reset.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/3e6fd765850e8ef0980d8e98bc5f2126538d626f.1631177442.git.geert+renesas@glider.be

Describe all Ethernet PHY reset GPIOs on RZ/G1 boards, to avoid relying
solely on boot loaders to bring PHYs out of reset.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e20b3643b4dc5f6c2a9e19d9544495c06075d9ff.1631177442.git.geert+renesas@glider.be

Describe all Ethernet PHY reset GPIOs on R-Mobile boards, to avoid
relying solely on boot loaders to bring PHYs out of reset.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b41bf0098ff193fbff9fad04d00075ce1bea1986.1631177442.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Realtek
RTL8211E PHYs on RZ/G2 boards.  This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/3b366e3dddd4d3cd7e89b92d3a8f78f6dc18e244.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ9031 PHYs on R-Car Gen3 boards.  This allows software to identify the
PHY model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/07bd7e04dda9e84cde0664980f0b1a6d69e03109.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Atheros
AR8031 PHYs on RZ/G2 boards.  This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/3f1b58756f149f0c634c66abaecc88e699f4c3cc.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Renesas
uPD60610 or uPD60611 PHYs on RZ/A1 boards.  This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/335a1dfea905369da683e122e41e08ca1c5f90f7.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Realtek
RTL8201FL PHYs on RZ/A2 boards.  This allows software to identify the
PHY model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/a23eca16869457684b0300379233e335b4e2047e.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing SMSC
LAN8710A PHYs on RZ/A1 and R-Mobile A1 boards.  This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/247dc2074dae149af07b6d014985ad30eb362eda.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ9031 PHYs on RZ/G1 boards. This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/ce8ae6b199fa244315a008ae31891a808ca1948d.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ8081 PHYs on RZ/G1 boards. This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/ec5c7dadf3c0fe5e47dfbae72fb435047203ad06.1631174218.git.geert+renesas@glider.be

Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ8041 PHYs on RZ/G1 and R-Car Gen2 boards.  This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/f9e26625924f90eff34fe6f6f02b15fa272c5d80.1631174218.git.geert+renesas@glider.be

While networking works fine in RGMII mode when using the Linux generic
PHY driver, it fails when using the Atheros PHY driver.
Fix this by correcting the Ethernet PHY mode to RGMII-RXID, which works
fine with both drivers.

Fixes: a5200e63 ("arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling")
Reported-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2a4c15b2df23bb63f15abf9dfb88860477f4f523.1632465965.git.geert+renesas@glider.be

According to schematics, and confirmed by ID_REV register contents, the
Ethernet controllers on various development board are not SMSC LAN9220,
but different variants:
  - KZM-A9-Dual and KZM-A9-GT: LAN9221,
  - Bock-W and Marzen: LAN89218AQ.

Update the compatible values accordingly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/59c142176f795b3541c935df43ab11cecd77cc61.1631173813.git.geert+renesas@glider.be

Enable CANFD on RZ/G2L SMARC platform.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210924102338.11595-1-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Enable the ADC which is present on RZ/G2L SMARC SOM.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210922212049.19851-3-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Move extal and memory nodes to SOM DTSI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210922212049.19851-2-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add support for SW47, SW48 and SW49 via "gpio-keys" on the R-Car V3U
Falcon board.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/20210922201314.3205674-1-kieran.bingham@ideasonboard.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add audio routing for Mic with bias to reduce noise when doing
audio capture.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210921084605.16250-5-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Enable audio on RZ/G2L SMARC EVK by linking SSI0 with WM8978
audio CODEC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210921084605.16250-4-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add WM8978 sound codec node to RZ/G2L SMARC EVK.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210921084605.16250-3-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add dmac phandles to SSI nodes to support DMA operation.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210921084605.16250-2-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Enable I2C{0,1,3} support on RZ/G2L SMARC EVK.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210920182955.13445-3-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Enable USB2.0 Host/Device support on RZ/G2L SMARC EVK.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210920182955.13445-2-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add iommus into sdhi node.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210901111305.570206-3-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add IPMMU nodes for r8a779a0. Note that this patch sets the power
domain of IPMMU-VC0 is Always-On tentatively because the SoC doesn't
have A3VC power domain.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210901111305.570206-2-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This patch adds TPU node for R-Car V3U (r8a779a0) SoC.
Signed-off-by: Duc Nguyen <duc.nguyen.ub@renesas.com>
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20210901091725.35610-3-wsa+renesas@sang-engineering.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add the missing TPU node for the R-Car M3-W+ SoC.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210827073819.29992-1-wsa+renesas@sang-engineering.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add SSI{0,1,2,3} nodes to RZ/G2L SoC DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210814135526.15561-3-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add external audio clocks nodes to RZ/G2L (a.k.a R9A07G044) SoC DTSI.

The external audio clocks are configured as 0 Hz fixed frequency clocks by
default. Boards that provide audio clocks should override them.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210814135526.15561-2-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add USB2.0 device support to RZ/G2L SoC DT.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210812151808.7916-4-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add USB2.0 phy and host support to SoC DT.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210812151808.7916-3-biju.das.jz@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add support for the Renesas Salvator-X 2nd version development board
equipped with an R-Car M3Ne-2G SiP.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/efced5c7ff71b0a0ae359be12112e0d4dfb21a72.1628766192.git.geert+renesas@glider.be

Add support for the Renesas R-Car H3Ne (R8A779M8) SoC, which is a
different grading of the R-Car H3-N (R8A77951) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/99ff5658889e22ea8e723733e6972c27370930bf.1628766192.git.geert+renesas@glider.be

Add support for the Renesas R-Car D3e (R8A779M7) SoC, which is a
different grading of the R-Car D3 (R8A77995) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2aa5b34d5b50f757092bc6442bb59a8534f2ff24.1628766192.git.geert+renesas@glider.be

Add support for the Renesas R-Car E3e (R8A779M6) SoC, which is a
different grading of the R-Car E3 (R8A77990) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/004e837531de4160ac4815fe7836b1f05d6fad85.1628766192.git.geert+renesas@glider.be

Add support for the Renesas R-Car M3Ne-2G (R8A779M5) SoC, which is a
different grading of the R-Car M3-N (R8A77965) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2ed19a0e009d3e7afb330086b69c8724465b88cc.1628766192.git.geert+renesas@glider.be

Add support for the Renesas R-Car M3Ne (R8A779M4) SoC, which is a
different grading of the R-Car M3-N (R8A77965) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/52aa6dcf6682f54fa2bf53491ef7de5173192a73.1628766192.git.geert+renesas@glider.be

Add support for the Renesas R-Car M3e (R8A779M2) SoC, which is a
different grading of the R-Car M3-W+ (R8A77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2303577cac91aa6d98e7f2c72e36841f6218e53f.1628766192.git.geert+renesas@glider.be