- 15 Mar, 2020 40 commits
-
-
Li RongQing authored
TEMPLATE_NULLS_VAL is not used after commit 0838aa7f ("netfilter: fix netns dependencies with conntrack templates") PFX is not used after commit 8bee4bad ("netfilter: xt extensions: use pr_<level>") Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
They do not need to be writeable anymore. v2: remove left-over __read_mostly annotation in set_pipapo.c (Stefano) Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
Placing nftables set support in an extra module is pointless: 1. nf_tables needs dynamic registeration interface for sake of one module 2. nft heavily relies on sets, e.g. even simple rule like "nft ... tcp dport { 80, 443 }" will not work with _SETS=n. IOW, either nftables isn't used or both nf_tables and nf_tables_set modules are needed anyway. With extra module: 307K net/netfilter/nf_tables.ko 79K net/netfilter/nf_tables_set.ko text data bss dec filename 146416 3072 545 150033 nf_tables.ko 35496 1817 0 37313 nf_tables_set.ko This patch: 373K net/netfilter/nf_tables.ko 178563 4049 545 183157 nf_tables.ko Signed-off-by: -
Xin Long authored
Like vxlan and erspan opts, geneve opts should also be supported in nft_tunnel. The difference is geneve RFC (draft-ietf-nvo3-geneve-14) allows a geneve packet to carry multiple geneve opts. So with this patch, nftables/libnftnl would do: # nft add table ip filter # nft add chain ip filter input { type filter hook input priority 0 \; } # nft add tunnel filter geneve_02 { type geneve\; id 2\; \ ip saddr 192.168.1.1\; ip daddr 192.168.1.2\; \ sport 9000\; dport 9001\; dscp 1234\; ttl 64\; flags 1\; \ opts \"1:1:34567890,2:2:12121212,3:3:1212121234567890\"\; } # nft list tunnels table filter table ip filter { tunnel geneve_02 { id 2 ip saddr 192.168.1.1 ip daddr 192.168.1.2 sport 9000 dport 9001 tos 18 ttl 64 flags 1 geneve opts 1:1:34567890,2:2:12121212,3:3:1212121234567890 } } v1->v2: - no changes, just post it separately. Signed-off-by:Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Manoj Basapathi authored
This is a snapshot of hardidletimer netfilter target. This patch implements a hardidletimer Xtables target that can be used to identify when interfaces have been idle for a certain period of time. Timers are identified by labels and are created when a rule is set with a new label. The rules also take a timeout value (in seconds) as an option. If more than one rule uses the same timer label, the timer will be restarted whenever any of the rules get a hit. One entry for each timer is created in sysfs. This attribute contains the timer remaining for the timer to expire. The attributes are located under the xt_idletimer class: /sys/class/xt_idletimer/timers/<label> When the timer expires, the target module sends a sysfs notification to the userspace, which can then decide what to do (eg. disconnect to save power) Compared to IDLETIMER, HARDIDLETIMER can send notifications when CPU is in suspend too, to notify the timer expiry. v1->v2: Moved all functionality into IDLETIMER module to avoid code duplication per comment from Florian. Signed-off-by:
Manoj Basapathi <manojbm@codeaurora.org> Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
Paul Blakey authored
This patch doesn't change any functionality. Signed-off-by:
Paul Blakey <paulb@mellanox.com> Signed-off-by:
-
Alexander Bersenev authored
The ndp32->wLength is two bytes long, so replace cpu_to_le32 with cpu_to_le16. Fixes: 0fa81b30 ("cdc_ncm: Implement the 32-bit version of NCM Transfer Block") Signed-off-by:
Alexander Bersenev <bay@hackerdom.ru> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Paolo Abeni says: ==================== mptcp: simplify mptcp_accept() Currently we allocate the MPTCP master socket at accept time. The above makes mptcp_accept() quite complex, and requires checks is several places for NULL MPTCP master socket. These series simplify the MPTCP accept implementation, moving the master socket allocation at syn-ack time, so that we drop unneeded checks with the follow-up patch. v1 -> v2: - rebased on top of 2398e399 ==================== Signed-off-by:
-
Paolo Abeni authored
After the previous patch subflow->conn is always != NULL and is never changed. We can drop a bunch of now unneeded checks. v1 -> v2: - rebased on top of commit 2398e399 ("mptcp: always include dack if possible.") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Paolo Abeni authored
This change moves the mptcp socket allocation from mptcp_accept() to subflow_syn_recv_sock(), so that subflow->conn is now always set for the non fallback scenario. It allows cleaning up a bit mptcp_accept() reducing the additional locking and will allow fourther cleanup in the next patch. Signed-off-by:
-
Dejin Zheng authored
Use devm_platform_ioremap_resource() to simplify code, which contains platform_get_resource and devm_ioremap_resource. Signed-off-by:
Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Being a non-physical port, the CPU port does not have an ocelot_port structure, so the ocelot_port_writel call inside the ocelot_port_set_maxlen() function would access data behind a NULL pointer. This is a patch for net-next only, the net tree boots fine, the bug was introduced during the net -> net-next merge. Fixes: 1d343579 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Fixes: a8015ded ("net: mscc: ocelot: properly account for VLAN header length when setting MRU") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Hoang Le authored
Calling: tipc_node_link_down()-> - tipc_node_write_unlock()->tipc_mon_peer_down() - tipc_mon_peer_down() just after disabling bearer could be caused kernel oops. Fix this by adding a sanity check to make sure valid memory access. Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by:
-
Hoang Le authored
Checking and returning 'true' boolean is useless as it will be returning at end of function Signed-off-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== ethtool: consolidate irq coalescing - part 5 Convert more drivers following the groundwork laid in a recent patch set [1] and continued in [2], [3], [4]. The aim of the effort is to consolidate irq coalescing parameter validation in the core. This set converts further 15 drivers in drivers/net/ethernet. One more conversion sets to come. [1] https://lore.kernel.org/netdev/20200305051542.991898-1-kuba@kernel.org/ [2] https://lore.kernel.org/netdev/20200306010602.1620354-1-kuba@kernel.org/ [3] https://lore.kernel.org/netdev/20200310021512.1861626-1-kuba@kernel.org/ [4] https://lore.kernel.org/netdev/20200311223302.2171564-1-kuba@kernel.org/ ==================== Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver already correctly rejected almost all unsupported parameters (missing sample_rate_interval). As a side effect of these changes the error code for unsupported params changes from EINVAL to EOPNOTSUPP. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. As a side effect of these changes the error code for unsupported params changes from EINVAL to EOPNOTSUPP. The driver was missing a check for rate_sample_interval. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver correctly rejects all unsupported parameters, no functional changes. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver correctly rejects all unsupported parameters, no functional changes. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
David S. Miller authored
Antoine Tenart says: ==================== net: phy: split the mscc driver This is a proposal to split the MSCC PHY driver, as its code base grew a lot lately (it's already 3800+ lines). It also supports features requiring a lot of code (MACsec), which would gain in being split from the driver core, for readability and maintenance. This is also done as other features should be coming later, which will also need lots of code addition. This series shouldn't change the way the driver works. I checked, and there were no patch pending on this driver. This change was done on top of all the modifications done on this driver in net-next. Since v2: - Defined inline functions as static inline. - Fixed a locking issue reported by Kbuild. Since v1: - Moved more definitions into the mscc_macsec.h header. ==================== Signed-off-by: -
Antoine Tenart authored
Cosmetic commit fixing the MSCC PHY header defines and descriptions, which were referring the to MSCC Ocelot MAC driver (see drivers/net/ethernet/mscc/). Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Antoine Tenart authored
This patch splits the MSCC driver into separate files, per functionality, to improve readability and maintenance as the codebase grew a lot. The MACsec code is moved to a dedicated mscc_macsec.c file, the mscc.c file is renamed to mscc_main.c to keep the driver binary to be named mscc and common definition are put into a new mscc.h header. Most of the code was just moved around, except for a few exceptions: - Header inclusions were reworked to only keep what's needed. - Three helpers were created in the MACsec code, to avoid #ifdef's in the main C file: vsc8584_macsec_init, vsc8584_handle_macsec_interrupt and vsc8584_config_macsec_intr. The patch should not introduce any functional modification. Signed-off-by:
-
Antoine Tenart authored
The MSCC PHY driver is growing, with lots of space consuming features (firmware support, full initialization, MACsec...). It's becoming hard to read and navigate in its source code. This patch moves the MSCC driver to its own directory, without modifying anything, as a preparation for splitting up its features into dedicated files. Signed-off-by:
-
David S. Miller authored
Petr Machata says: ==================== RED: Introduce an ECN tail-dropping mode When the RED qdisc is currently configured to enable ECN, the RED algorithm is used to decide whether a certain SKB should be marked. If that SKB is not ECN-capable, it is early-dropped. It is also possible to keep all traffic in the queue, and just mark the ECN-capable subset of it, as appropriate under the RED algorithm. Some switches support this mode, and some installations make use of it. There is currently no way to put the RED qdiscs to this mode. Therefore this patchset adds a new RED flag, TC_RED_TAILDROP. When the qdisc is configured with this flag, non-ECT traffic is enqueued (and tail-dropped when the queue size is exhausted) instead of being early-dropped. Unfortunately, adding a new RED flag is not as simple as it sounds. RED flags are passed in tc_red_qopt.flags. However RED neglects to validate the flag field, and just copies it over wholesale to its internal structure, and later dumps it back. A broken userspace can therefore configure a RED qdisc with arbitrary unsupported flags, and later expect to see the flags on qdisc dump. The current ABI thus allows storage of 5 bits of custom data along with the qdisc instance. GRED, SFQ and CHOKE qdiscs are in the same situation. (GRED validates VQ flags, but not the flags for the main queue.) E.g. if SFQ ever needs to support TC_RED_ADAPTATIVE, it needs another way of doing it, and at the same time it needs to retain the possibility to store 6 bits of uninterpreted data. For RED, this problem is resolved in patch #2, which adds a new attribute, and a way to separate flags from userbits that can be reused by other qdiscs. The flag itself and related behavioral changes are added in patch To test the new feature, patch #1 first introduces a TDC testsuite that covers the existing RED flags. Patch #5 later extends it with taildrop coverage. Patch #6 contains a forwarding selftest for the offloaded datapath. To test the SW datapath, I took the mlxsw selftest and adapted it in mostly obvious ways. The test is stable enough to verify that RED, ECN and ECN taildrop actually work. However, I have no confidence in its portability to other people's machines or mildly different configurations. I therefore do not find it suitable for upstreaming. GRED and CHOKE can use the same method as RED if they ever need to support extra flags. SFQ uses the length of TCA_OPTIONS to dispatch on binary control structure version, and would therefore need a different approach. v2: - Patch #1 - Require nsPlugin in each RED test - Match end-of-line to catch cases of more flags reported than requested - Patch #2: - Replaced with another patch. - Patch #3: - Fix red_use_taildrop() condition in red_enqueue switch for probabilistic case. - Patch #5: - Require nsPlugin in each RED test - Match end-of-line to catch cases of more flags reported than requested - Add a test for creation of non-ECN taildrop, which should fail ==================== Signed-off-by: -
Petr Machata authored
Extend RED testsuite to cover the new nodrop mode of RED-ECN. This test is really similar to ECN test, diverging only in the last step, where UDP traffic should go to backlog instead of being dropped. Thus extract a common helper, ecn_test_common(), make do_ecn_test() into a relatively simple wrapper, and add another one, do_ecn_nodrop_test(). Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Petr Machata authored
Add tests for the new "nodrop" flag. Signed-off-by:
-
Petr Machata authored
RED ECN nodrop mode means that non-ECT traffic should not be early-dropped, but enqueued normally instead. In Spectrum systems, this is achieved by disabling CWTPM.ew (enable WRED) for a given traffic class. So far CWTPM.ew was unconditionally enabled. Instead disable it when the RED qdisc is in nodrop mode. Signed-off-by:
-
Petr Machata authored
When the RED Qdisc is currently configured to enable ECN, the RED algorithm is used to decide whether a certain SKB should be marked. If that SKB is not ECN-capable, it is early-dropped. It is also possible to keep all traffic in the queue, and just mark the ECN-capable subset of it, as appropriate under the RED algorithm. Some switches support this mode, and some installations make use of it. To that end, add a new RED flag, TC_RED_NODROP. When the Qdisc is configured with this flag, non-ECT traffic is enqueued instead of being early-dropped. Signed-off-by:
-
Petr Machata authored
The qdiscs RED, GRED, SFQ and CHOKE use different subsets of the same pool of global RED flags. These are passed in tc_red_qopt.flags. However none of these qdiscs validate the flag field, and just copy it over wholesale to internal structures, and later dump it back. (An exception is GRED, which does validate for VQs -- however not for the main setup.) A broken userspace can therefore configure a qdisc with arbitrary unsupported flags, and later expect to see the flags on qdisc dump. The current ABI therefore allows storage of several bits of custom data to qdisc instances of the types mentioned above. How many bits, depends on which flags are meaningful for the qdisc in question. E.g. SFQ recognizes flags ECN and HARDDROP, and the rest is not interpreted. If SFQ ever needs to support ADAPTATIVE, it needs another way of doing it, and at the same time it needs to retain the possibility to store 6 bits of uninterpreted data. Likewise RED, which adds a new flag later in this patchset. To that end, this patch adds a new function, red_get_flags(), to split the passed flags of RED-like qdiscs to flags and user bits, and red_validate_flags() to validate the resulting configuration. It further adds a new attribute, TCA_RED_FLAGS, to pass arbitrary flags. Signed-off-by:
-
