- 13 Aug, 2015 4 commits
-
-
Olof Johansson authored
Merge tag 'socfpga_dts_for_v4.3_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA DTS updates for v4.3, take 2 - Add DTS property "altr,modrst-offset" for reset driver to use - Add updated reset defines for the reset driver - Add reset property for EMACs on Arria10 * tag 'socfpga_dts_for_v4.3_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: Add resets for EMACs on Arria10 ARM: socfpga: dts: add "altr,modrst-offset" property dt-bindings: Add reset manager offsets for Arria10 Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'v4.3-rockchip32-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Some more devicetree changes, including usbphy support for the Cortex-A9 SoCs and actually enabling usb on the rk3066-marsboard, Two more veyron-devices - namely Speedy and Minnie and a fix for the tsadc. One slightly more interesting fix is the blocking of the last 16MB of memory on 4GB rk3288 devices. The rk3288 cannot use this area for dma operations, so things like the mmc or usb controllers regularly fail when trying to read data. This solution mimicks the solution from the ChromeOS kernel, who also do not seem to have found a better solution yet. Here it only moves to the devicetree. As this issue is also present on the arm64 rk3368, any future better solution to this problem would need to describe this in the devicetree as well and could then remove this block. * tag 'v4.3-rockchip32-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add veyron-minnie board ARM: dts: rockchip: reserve unusable memory region on rk3288 ARM: dts: rockchip: enable usb controller on marsboard ARM: dts: rockchip: add usb phys to Cortex-A9 socs ARM: dts: rockchip: set correct dwc2 params for cortex-a9 socs ARM: dts: rockchip: Add veyron-speedy board ARM: dts: rockchip: Use correct dts properties for tsadc node on veyron Signed-off-by:
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
mvebu dt changes for v4.3 (part #3) - device tree part of the Dove PMU series - converting a new orion5x based platform to dt: Linkstation Mini * tag 'mvebu-dt-4.3-3' of git://git.infradead.org/linux-mvebu: ARM: dts: Convert Linkstation Mini to Device Tree ARM: dt: dove: add GPU power domain description ARM: dt: dove: add video decoder power domain description ARM: dt: dove: wire up RTC interrupt ARM: dt: Add PMU node, making PMU child devices childs of this node Signed-off-by:
-
Olof Johansson authored
Merge tag 'at91-ab-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt Second batch of DT changes for 4.3: - Add the slow clock to the nodes that will use it - Add hlcd to the at91sam9x5 and at91sam9n12 - Add touchscreen and touch button support to the at91sam9x5ek * tag 'at91-ab-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (22 commits) ARM: at91/dt: sama5d2: use slow clock where necessary ARM: at91/dt: at91sam9x5dm: add QT1070 touch button controller ARM: at91/dt: at91sam9x5dm: add support for the touschscreen ARM: at91/dt: add drm support for at91sam9n12ek ARM: at91/dt: enable lcd support for at91sam9x5 SoCs ARM: at91/dt: add at91sam9x5-ek Display Module dtsi ARM: at91/dt: include lcd dtsi in at91sam9x5 dtsis ARM: at91/dt: define hlcdc node in at91sam9x5_lcd.dtsi ARM: at91/dt: sama5d4: use slow clock where necessary ARM: at91/dt: sama5d3: use slow clock where necessary ARM: at91/dt: at91sam9x5: use slow clock where necessary ARM: at91/dt: at91sam9rl: use slow clock where necessary ARM: at91/dt: at91sam9n12: use slow clock where necessary ARM: at91/dt: at91sam9g45: use slow clock where necessary ARM: at91/dt: at91sam9263: use slow clock where necessary ARM: at91/dt: at91sam9261: use slow clock where necessary ARM: at91/dt: at91sam9260: use slow clock where necessary ARM: at91/dt: at91rm9200: use slow clock where necessary Documentation: dt: rtc: at91rm9200: add clocks property Documentation: watchdog: at91sam9_wdt: add clocks property ... Signed-off-by:
-
- 11 Aug, 2015 11 commits
-
-
Olof Johansson authored
Merge tag 'renesas-dt3-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Third Round of Renesas ARM Based SoC DT Updates for v4.3 * Add JPU support: r8a7791 and r8a7790 SoCs * Add MMCIF and PFC support: r8a7794 SoC * Add initial support for r8a7794/silk * Add missing "gpio-ranges" to gpio nodes: sh73a0, r8a7740 and r8a73a4 SoCs * tag 'renesas-dt3-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh73a0 dtsi: Add missing "gpio-ranges" to gpio node ARM: shmobile: r8a7740 dtsi: Add missing "gpio-ranges" to gpio node ARM: shmobile: r8a73a4 dtsi: Add missing "gpio-ranges" to gpio node ARM: shmobile: silk: add eMMC DT support ARM: shmobile: r8a7794: add MMCIF DT support ARM: shmobile: silk: add Ether DT support ARM: shmobile: silk: initial device tree ARM: shmobile: r8a7794: add PFC DT support ARM: shmobile: r8a7791: Add JPU device node. ARM: shmobile: r8a7790: Add JPU device node. Signed-off-by:
-
Olof Johansson authored
Merge tag 'omap-for-v4.3/dt-pt3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Omap device tree changes for v4.3 merge window. Pretty much all just trivial additions to configure devices for various SoCs and boards: - Updates for omap3-devkit8000 board support - M3 coprosessor, regulator, mux, RTC and eMMC updates for am437x - MMC, regmap, mux and dwc3 updates for dra7 and omap5 * tag 'omap-for-v4.3/dt-pt3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits) ARM: dts: omap3-devkit8000: Add ADS7846 Touchscreen support ARM: dts: omap3-devkit8000: add LCD panels ARM: dts: omap3-devkit8000: Add DSS' DVI support ARM: dts: omap3-devkit8000: Add S-video output support ARM: dts: omap3-devkit8000: Add keymap support ARM: dts: omap3-devkit8000: Add PMU stat support ARM: dts: omap3-devkit8000: Add user button support ARM: dts: am437x-gp-evm: Add regulator-always-on and regulator-boot-on for RTC DCDCs ARM: dts: AM4372: Reorder the rtc compatible string ARM: dts: am437x-gp-evm: Add eMMC support ARM: dts: am437x-gp-evm: Add gpio-hog for configuring eMMC/NAND driver ARM: dts: am43xx: Introduce MUX_MODE9 for pinctrl ARM: dts: dra72-evm: Fix spurious card insert/removal interrupt ARM: dts: dra7-evm: Fix spurious card insert/removal interrupt ARM: dts: am57xx-beagle-x15: mmc1: remove redundant pbias-supply property ARM: dts: dra7-evm: Add MMCSD card removal GPIO ARM: dts: dra72-evm: Set max clock frequency of MMC1 and MMC2 ARM: dts: dra7-evm: add evm_3v3_sd regulator ARM: dts: dra72-evm: add evm_3v3_sd regulator ARM: dts: AM4372: Add the wkup_m3_ipc node ... Signed-off-by:
-
Masahiro Yamada authored
This is used as a base board for reference core modules. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Gregory Fong authored
Need the aon_pm_l2_intc and irq0_aon_intc descriptions, so included those as well. Signed-off-by:
Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Hauke Mehrtens authored
In the default Broadcom SDK the shared override is activated for this cache controller, do the same in the upstream code. Data and instruction prefetching is not activated by default for this cache controller on the bcm53xx SoC, do it manually like it is done in the vendor SDK. Signed-off-by:
-
Olof Johansson authored
Merge tag 'sirf-dts-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/dt ARM: sirf: dts update for 4.3 some missed dt nodes or props for sirf dts for 4.3. Among them: - G2D - PWM - JPEG - Multimedia - PMU(performance monitor unit) - GMAC - SDR(software digital radio) and its DMA - pinmux for NAND - GPIO key * tag 'sirf-dts-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux: ARM: dts: atlas7: add a GPIO key for rearview button ARM: dts: atlas7: put pinctl property to get pinmux for NAND ARM: dts: atlas7: add software digital radio nodes and its DMA channels ARM: dts: atlas7: add lost PWM node ARM: dts: atlas7: add lost G2D node ARM: dts: atlas7: add multimedia codec node ARM: dts: atlas7: add alias name for spi device ARM: dts: atlas7: add lost gmac node ARM: dts: atlas7: add performance monitor unit node ARM: dts: atlas7: add lost jpeg node Signed-off-by:
-
Masahiro Yamada authored
Initial version of DTSI for ProXstream2 and PH1-LD6b and DTS for PH1-LD6b reference board. Signed-off-by:
-
Masahiro Yamada authored
Initial version of UniPhier PH1-Pro5 device tree. Signed-off-by:
-
Masahiro Yamada authored
Add I2C controller device nodes for PH1-sLD3, PH1-LD4, PH1-sLD8 (FIFO-less I2C) and PH1-Pro4 (FIFO-builtin I2C). Signed-off-by:
-
Olof Johansson authored
Merge tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Samsung 1st DT updates for v4.3 - for exynos3250 : update video-phy node with syscon phandle - for exynos4210 : add CPU OPP and regulator supply property : use labels for overriding nodes for exynos4210-universal_c210 - for exynos4412-trats2 : set max17047 over heat and voltage thresholds - for exynos5250 and 5420 : extend exynos5250/5420-pinctrl nodes using labels : include exynos5250/5420-pinctrl after the nodes definitions - for exynos5410-smdk5410 : clean up indentation - for exynos5422-odroidxu3 : define default thermal-zones for exynos5422 : enable USB3 regulators, TMU and thermal-zones : add pwm-fan node * tag 'samsung-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths ARM: dts: Include exynos5420-pinctrl after the nodes were defined for exynos5420 ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths ARM: dts: Include exynos5250-pinctrl after the nodes were defined for exynos5250 ARM: dts: Enable thermal-zones for exynos5422-odroidxu3 ARM: dts: Define default thermal-zones for exynos5422 ARM: dts: Enable TMU for exynos5422-odroidxu3 ARM: dts: Add pwm-fan node for exynos5422-odroidxu3 ARM: dts: Use labels for overriding nodes for exynos4210-universal_c210 ARM: dts: Set max17047 over heat and voltage thresholds for exynos4412-trats2 ARM: dts: Enable USB3 regulators for exynos5422-odroidxu3 ARM: dts: Clean up indentation for exynos5410-smdk5410 ARM: dts: add CPU OPP and regulator supply property for exynos4210 ARM: dts: Update video-phy node with syscon phandle for exynos3250 Signed-off-by:
-
- 10 Aug, 2015 3 commits
-
-
Dinh Nguyen authored
Add the reset property for the EMAC controllers on Arria10. Signed-off-by:Dinh Nguyen <dinguyen@opensource.altera.com>
-
Dinh Nguyen authored
The "altr,modrst-offset" property represents the offset into the reset manager that is the first register to be used by the driver to bring peripherals out of reset. Signed-off-by: -
Dinh Nguyen authored
The reset manager for is pretty similar to the one for SoCFPGA cyclone5/arria5 except for a few offsets. This patch adds those offsets. Signed-off-by:
-
- 08 Aug, 2015 5 commits
-
-
Alexandru M Stan authored
Also known as the Asus Chromebook Flip. Signed-off-by:
Alexandru M Stan <amstan@chromium.org> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Douglas Anderson <dianders@chromium.org>
-
Heiko Stuebner authored
The all current Rockchip SoCs supporting 4GB of ram have problems accessing the memory region 0xfe000000~0xff000000. This also seems to includes the rk3368 arm64 soc. All current code handling dma memory oddities I could find, seem to involve soc-specific code (zone-dma or so) while this issue is shared between arm32 and arm64 socs from Rockchip, which would need to have this described in the soc devicetree on both socs. Limiting the dma-zone alone also does not solve the issue and as the dma-masks need to be a power-of-two in the kernel, the next lower dma-mask brings memory usable for dma down to 2GB. So as a stop-gap block off the affected region to prevent its use by devices with 4GB of memory, like some recent Chromebooks. Signed-off-by:
-
Heiko Stuebner authored
This enables the previously disabled usb controllers on the marsboard and makes it possible to for example mount usb mass storage devices. Signed-off-by: -
Heiko Stuebner authored
This adds the usbphy nodes to rk3066 and rk3188, which share the usb hosts in rk3xxx.dtsi and also enables it on boards based around these socs. The usb-phy itself is the same as used on the rk3288 already. Signed-off-by: -
Heiko Stuebner authored
According to the manual, the fifo sizes are the same as on later socs like the rk3288 and this also fixes an error about "insufficient fifo memory", as it seems the values read from the ip are wrong. Signed-off-by:
-
- 07 Aug, 2015 17 commits
-
-
Alexandre Belloni authored
The watchdog, the reset controller, the RTC, the shutdown controller, the timer counters and the LCD PWM need the slow clock, add it to the currently defined nodes. Signed-off-by:Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Nicolas Ferre authored
The display module for at91sam9x5-ek has a few touch buttons, add support for those. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Alexandre Belloni authored
The display module on the at91sam9x5-ek has a resistive touchscreen, add it. Signed-off-by: -
Bo Shen authored
Add drm support for at91sam9n12ek board. Signed-off-by:
Bo Shen <voice.shen@atmel.com> Signed-off-by:
Josh Wu <josh.wu@atmel.com> Signed-off-by:
-
Boris Brezillon authored
Use the at91sam9x5 display module dtsi in the relevant board dts. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Boris Brezillon authored
All the at91sam9x5-ek share the share display module, add a dtsi to describe it. Signed-off-by:
-
Boris Brezillon authored
Actually make use of at91sam9x5_lcd.dtsi in the relevant SoC dtsis. Signed-off-by:
-
Boris Brezillon authored
Define at91sam9x5 hlcdc node for the SoCs with an LCD controller. Signed-off-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the RTC, the shutdown controller, the timer counters and the LCD PWM need the slow clock, add it where necessary. Acked-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the RTC, the shutdown controller, the timer counters and the LCD PWM need the slow clock, add it where necessary. [boris.brezillon@free-electrons.com: add tcb clocks] Signed-off-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the RTC, the shutdown controller, the timer counters and the LCD PWM need the slow clock, add it where necessary, The LCD PWM will be handled later. Acked-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the RTC, the real-time timer, the shutdown controller and the timer counter need the slow clock, add it where necessary. Acked-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the RTC, the shutdown controller, the timer counters and the LCD PWM need the slow clock, add it where necessary. The LCD PWM will be handled later. Acked-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the RTC, the real-time timer, the shutdown controller and the timer counters need the slow clock, add it where necessary. Acked-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the two real-time timers, the shutdown controller and the timer counter need the slow clock, add it where necessary. Acked-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the real-time timer, the shutdown controller and the timer counter need the slow clock, add it where necessary. Acked-by:
-
Alexandre Belloni authored
The watchdog, the reset controller, the real-time timer, the shutdown controller, the timer counters need the slow clock, add it where necessary. Acked-by:
-
