- 24 Feb, 2010 24 commits
-
-
Kukjin Kim authored
This patch adds support for Samsung S5PV210 CPU. This patch also adds an entry for S5PV210 cpu in plat-s5p cpu table. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Jassi Brar authored
[Updated the device ID to -1 since there's only one IISv4 device but the S3C clock API tries to match based on the ID of the requesting device (and not the name) -- broonie.] Signed-Off-by: Jassi Brar <jassi.brar@samsung.com> [ben-linux@fluff.org: Fixed Jassi's lastname] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Jassi Brar authored
This patch defines the platform device and the resources: IRQ, DMA and MEM, needed by the AC97 controller driver. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Mark Brown authored
The IISv4 controller is connected to the WM8580 on the board. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Mark Brown authored
The PMIC LED on the SMDK6410 CPU board is driven by GPIO4 of the WM8312 PMIC. Provide software control of this LED. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Mark Brown authored
The Wolfson Microelectronics 1192-EV1 is a plug in module for the SMDK6410 providing power using a WM8312 PMIC. This patch provides initial hookup sufficient to initialise the board, though not all features are fully described yet. As part of this supplies for the system that are provided as a single supply by one of the currently merged PMIC boards are factored out so they can be reused between different regulators. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Jassi Brar authored
GPIO_E-[5,9] pin functionality was defined incorrectly. The patch corrects and adds missing pins. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Jassi Brar authored
Add AC97 controller to platform devices and initialize the AC97 gpios. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
The recent changes in the UART code mean that we need to ensure that the 4 UART case is only selected if S5PV210 is being compiled. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Kukjin Kim authored
This patch adds UART serial port support for S5P6442. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Kukjin Kim authored
This patch adds S5P6442 default configuration file. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Kukjin Kim authored
This patch adds SMDK6442 board support file. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Kukjin Kim authored
Updates arch/arm Kconfig and Makefile for building the S5P6442 support. Also modifies the plat-s5p Kconfig file to include the support for plat-s5p for S5P6442. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
The removal of plat-s3c has left these missing from the initial commit, so add copies from elsewhere. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Kukjin Kim authored
This patch adds IRQ support for S5P6442. This patch adds interrupt register definitions, IRQ definitions for various interrupt sources and new VIC base for VIC2 in plat-s5p common irq code. Signed-off-by: Adityapratap Sharma <aditya.ps@samsung.com> Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Kukjin Kim authored
This patch adds clock support for S5P6442. This patch adds the clock register definitions and the various system clocks in S5P6442. Signed-off-by: Adityapratap Sharma <aditya.ps@samsung.com> Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Kukjin Kim authored
This patch adds support for Samsung S5P6442 CPU. This patch also adds an entry for S5P6442 cpu in plat-s5p cpu table. Signed-off-by: Adityapratap Sharma <aditya.ps@samsung.com> Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Vasily Khoruzhick authored
IRQ should be disabled on suspend and re-enabled on resume. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Vasily Khoruzhick authored
Without resources description driver fails during initialization. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
The plat-s3c directory is now clear, so remove the files in it and expunge it from the build process. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Move the include/mach files out of plat-s3c and into the relevant machine files. This does mean copying the files, but there is nowhere else to put them. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
All these platforms select NO_IOPORT, so move it to plat-samsung Kconfig Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Continue the clearout of plat-s3c by moving audio-simtec.h to plat-s3c24xx as there are no current implementations outside of this platform. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Move the Kconfig entries from plat-s3c to plat-samsung and plat-s3c24xx as necessary. The S3C_BOOT entries and the DMA configuration can go to plat-samsung. The low-level UART configurations are currently S3C2XX specific and can go to plat-s3c24xx. Eliminating plat-s3c from the build process will be submitted seperately. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
- 23 Feb, 2010 5 commits
-
-
Ben Dooks authored
Move the init.c and time.c files to plat-samsung from plat-s3c, thus clearing the last files that are being built in here. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Move the core of the DMA support to plat-samsung for everyone to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Move pm.c to plat-samsung, it should be usable by all Samsung systems Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Move the map-base file to plat-samsung. To make the move easier, we do not change the S3C_ prefix on many of the items as this would involve going through altering all the dependencies. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Move common headers from plat-s3c's include/plat directory into plat-samsung. No need to fix any files, these are still included via <plat/> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
- 22 Feb, 2010 2 commits
-
-
Ben Dooks authored
Merge branch 'next-samsung-s3c64xx-platdeletion' into next-samsung Conflicts: arch/arm/mach-s3c64xx/Makefile (fixed)
-
Ben Dooks authored
Now we've move the support out of plat-s3c64xx for everything, eliminate the platform directory arch/arm/plat-s3c64xx and remove it from the ARM build configuration. Note, PLAT_S3C64XX is kept around for the moment until the drivers that depend on it can be updated, so it is moved to the mach-s3c64xx Kconfig. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
- 21 Feb, 2010 1 commit
-
-
Ben Dooks authored
dma-plat.h is the last file left in plat-s3c64xx, but to remove it we must also change the use of dma-plat.h by the core code and the s3c24xx implementation. Rename the s3c24xx dma-plat.h in the common plat-samsung directory as it may be used for other ports. Move the specific dma bits into the mach-s3c64xx directory and update the build as needed. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
- 20 Feb, 2010 8 commits
-
-
Ben Dooks authored
Move the pm-core.h to the machine include directory in the process of eliminating the plat-s3c64xx. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Remove the Kconfig and PLAT_S3C64XX defines for the previous S3C64XX directory structure now that the code is moved into mach-s3c64xx. Note, we cannot currently remove plat-s3c64xx directory as we have a pair of include files used within plat-s3c and plat-samsung that need to find a new home. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Turn the init sequence of s3c24xx_register_baseclocks(xtal); s3c64xx_register_clocks(); s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK); into a single call as this is now contained within one file. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Merge plat-s3c64xx/s3c6400-clock.c mach-s3c64xx/clock.c placing all the clock code into one place. Note, no effort is made in this patch to squash the init functions together. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Since this file is small, and is compiled for both systems in this architecture merge it into the cpu support file and remove the original instead of moving it. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Move the core S3C64XX support to mach-s3c64xx as it is unlikely to be used outside of this directory. Also move the SoC header files in with it. This includes the clock, cpu, cpufreq, dma, gpiolib and pll support. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Move the S3C64XX specific device and setup files into mach-s3c64xx as they are unlikely to be used outside of this code. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Ben Dooks authored
Move IRQ support to mach-s3c64xx as it is unlikely to be re-used outside this machine. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-