- 13 Jan, 2019 40 commits
-
-
Masahiro Yamada authored
[ Upstream commit ef7cfd00 ] For the same reason as commit 25896d07 ("x86/build: Fix compiler support check for CONFIG_RETPOLINE"), you cannot put this $(error ...) into the parse stage of the top Makefile. Perhaps I'd propose a more sophisticated solution later, but this is the best I can do for now. Link: https://lkml.org/lkml/2017/12/25/211Reported-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Reported-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> Reported-by:
Qian Cai <cai@lca.pw> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by:
Sasha Levin <sashal@kernel.org>
-
Sara Sharon authored
[ Upstream commit 34b1e0e9 ] mac80211 uses the frag list to build AMSDU. When freeing the skb, it may not be really freed, since someone is still holding a reference to it. In that case, when TCP skb is being retransmitted, the pointer to the frag list is being reused, while the data in there is no longer valid. Since we will never get frag list from the network stack, as mac80211 doesn't advertise the capability, we can safely free and nullify it before releasing the SKB. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit f7db2beb ] Currently variable data0 is not being initialized so a garbage value is being passed to vxge_hw_vpath_fw_api and this value is being written to the rts_access_steer_data0 register. There are other occurrances where data0 is being initialized to zero (e.g. in function vxge_hw_upgrade_read_version) so I think it makes sense to ensure data0 is initialized likewise to 0. Detected by CoverityScan, CID#140696 ("Uninitialized scalar variable") Fixes: 8424e00d ("vxge: serialize access to steering control register") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jason Martinsen authored
[ Upstream commit 15515aaa ] Current state for the lan78xx driver does not allow for changing the MAC address of the interface, without either removing the module (if you compiled it that way) or rebooting the machine. If you attempt to change the MAC address, ifconfig will show the new address, however, the system/interface will not respond to any traffic using that configuration. A few short-term options to work around this are to unload the module and reload it with the new MAC address, change the interface to "promisc", or reboot with the correct configuration to change the MAC. This patch enables the ability to change the MAC address via fairly normal means... ifdown <interface> modify entry in /etc/network/interfaces OR a similar method ifup <interface> Then test via any network communication, such as ICMP requests to gateway. My only test platform for this patch has been a raspberry pi model 3b+. Signed-off-by:
Jason Martinsen <jasonmartinsen@msn.com> ----- Signed-off-by:
-
Anssi Hannula authored
[ Upstream commit 8159ecab ] Bit RX_USED set to 0 in the address field allows the controller to write data to the receive buffer descriptor. The driver does not ensure the ctrl field is ready (cleared) when the controller sees the RX_USED=0 written by the driver. The ctrl field might only be cleared after the controller has already updated it according to a newly received frame, causing the frame to be discarded in gem_rx() due to unexpected ctrl field contents. A message is logged when the above scenario occurs: macb ff0b0000.ethernet eth0: not whole frame pointed by descriptor Fix the issue by ensuring that when the controller sees RX_USED=0 the ctrl field is already cleared. This issue was observed on a ZynqMP based system. Fixes: 4df95131 ("net/macb: change RX path for GEM") Signed-off-by:
Anssi Hannula <anssi.hannula@bitwise.fi> Tested-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Anssi Hannula authored
[ Upstream commit e100a897 ] 64-bit DMA addresses are split in upper and lower halves that are written in separate fields on GEM. For RX, bit 0 of the address is used as the ownership bit (RX_USED). When the RX_USED bit is unset the controller is allowed to write data to the buffer. The driver does not guarantee that the controller already sees the upper half when the RX_USED bit is cleared, possibly resulting in the controller writing an incoming frame to an address with an incorrect upper half and therefore possibly corrupting unrelated system memory. Fix that by adding the necessary DMA memory barrier between the writes. This corruption was observed on a ZynqMP based system. Fixes: fff8019a ("net: macb: Add 64 bit addressing support for GEM") Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Tested-by:
-
Dan Carpenter authored
[ Upstream commit f07d4276 ] We accidentally deleted the code to set "rc = -ENOMEM;" and this patch adds it back. Fixes: d2201a21 ("qed: No need for LL2 frags indication") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit cf76785d ] Ensure that we clear XPRT_CONNECTING before releasing the XPRT_LOCK so that we don't have races between the (asynchronous) socket setup code and tasks in xprt_connect(). Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 6adafc35 ] Create a net bridge, add eth and vnet to the bridge. The vnet is used by a virtual machine. When ping the virtual machine from the outside host and the virtual machine send multicast at the same time, the ping package will lost. The multicast package send to the eth, eth will send it to the bridge too, and the bridge learn the mac of eth. When outside host ping the virtual mechine, it will match the promisc entry of the eth which is not expected, and the bridge send it to eth not to vnet, cause ping lost. So this patch change promisc tcam entry position to the END of 512 tcam entries, which indicate lower priority. And separate one promisc entry to two: mc & uc, to avoid package match the wrong tcam entry. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 726ae5c9 ] In some case, when mac enable|disable and adjust link, may cause hard to link(or abnormal) between mac and phy. This patch adds the code for rx PCS to avoid this bug. Disable the rx PCS when driver disable the gmac, and enable the rx PCS when driver enable the mac. Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 7e74a19c ] The ntuple-filters features is forced on by chip. But it shows "ntuple-filters: off [fixed]" when use ethtool. This patch make it correct with "ntuple-filters: on [fixed]". Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit a57275d3 ] There will be a large number of MAC pause frames on the net, which caused tx timeout of net device. And then the net device was reset to try to recover it. So that is not useful, and will cause some other problems. So need doubled ndev->watchdog_timeo if device watchdog occurred until watchdog_timeo up to 40s and then try resetting to recover it. When collecting dfx information such as hardware registers when tx timeout. Some registers for count were cleared when read. So need move this task before update net state which also read the count registers. Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit c82bd077 ] 1.In "hns_nic_init_irq", if request irq fail at index i, the function return directly without releasing irq resources that already requested. 2.In "hns_nic_net_up" after "hns_nic_init_irq", if exceptional branch occurs, irqs that already requested are not release. Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 31f6b61d ] If there are packets in hardware when changing the speed or duplex, it may cause hardware hang up. This patch adds the code to wait rx fbd clean up when ae stopped. Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 5778b13b ] After resetting dsaf to try to repair chip error such as ecc error, the net device will be open if net interface is up. But at this time if there is the users set the net device up with the command ifconfig, the net device will be opened twice consecutively. Function napi_enable was called when open device. And Kernel panic will be occurred if it was called twice consecutively. Such as follow: static inline void napi_enable(struct napi_struct *n) { BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state)); smp_mb__before_clear_bit(); clear_bit(NAPI_STATE_SCHED, &n->state); } [37255.571996] Kernel panic - not syncing: BUG! [37255.595234] Call trace: [37255.597694] [<ffff80000008ab48>] dump_backtrace+0x0/0x1a0 [37255.603114] [<ffff80000008ad08>] show_stack+0x20/0x28 [37255.608187] [<ffff8000009c4944>] dump_stack+0x98/0xb8 [37255.613258] [<ffff8000009c149c>] panic+0x10c/0x26c [37255.618070] [<ffff80000070f134>] hns_nic_net_up+0x30c/0x4e0 [37255.623664] [<ffff80000070f39c>] hns_nic_net_open+0x94/0x12c [37255.629346] [<ffff80000084be78>] __dev_open+0xf4/0x168 [37255.634504] [<ffff80000084c1ac>] __dev_change_flags+0x98/0x15c [37255.640359] [<ffff80000084c29c>] dev_change_flags+0x2c/0x68 [37255.769580] [<ffff8000008dc400>] devinet_ioctl+0x650/0x704 [37255.775086] [<ffff8000008ddc38>] inet_ioctl+0x98/0xb4 [37255.780159] [<ffff800000827b7c>] sock_do_ioctl+0x44/0x84 [37255.785490] [<ffff800000828e04>] sock_ioctl+0x248/0x30c [37255.790737] [<ffff80000026dc6c>] do_vfs_ioctl+0x480/0x618 [37255.796156] [<ffff80000026de94>] SyS_ioctl+0x90/0xa4 [37255.801139] SMP: stopping secondary CPUs [37255.805079] kbox: catch panic event. [37255.809586] collected_len = 128928, LOG_BUF_LEN_LOCAL = 131072 [37255.816103] flush cache 0xffff80003f000000 size 0x800000 [37255.822192] flush cache 0xffff80003f000000 size 0x800000 [37255.828289] flush cache 0xffff80003f000000 size 0x800000 [37255.834378] kbox: no notify die func register. no need to notify [37255.840413] ---[ end Kernel panic - not syncing: BUG! This patchset fix this bug according to the flag NIC_STATE_DOWN. Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 4ad26f11 ] According to the hip06 datasheet: 1.Six registers use wrong address: RCB_COM_SF_CFG_INTMASK_RING RCB_COM_SF_CFG_RING_STS RCB_COM_SF_CFG_RING RCB_COM_SF_CFG_INTMASK_BD RCB_COM_SF_CFG_BD_RINT_STS DSAF_INODE_VC1_IN_PKT_NUM_0_REG 2.The offset of DSAF_INODE_VC1_IN_PKT_NUM_0_REG should be 0x103C + 0x80 * all_chn_num 3.The offset to show the value of DSAF_INODE_IN_DATA_STP_DISC_0_REG is wrong, so the value of DSAF_INODE_SW_VLAN_TAG_DISC_0_REG will be overwrite These registers are only used in "ethtool -d", so that did not cause ndev to misfunction. Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 308c6caf ] There are two test cases: 1. Remove the 4 modules:hns_enet_drv/hns_dsaf/hnae/hns_mdio, and install them again, must use "ifconfig down/ifconfig up" command pair to bring port to work. This patch calls phy_stop function when init phy to fix this bug. 2. Remove the 2 modules:hns_enet_drv/hns_dsaf, and install them again, all ports can not use anymore, because of the phy devices register failed(phy devices already exists). Phy devices are registered when hns_dsaf installed, this patch removes them when hns_dsaf removed. The two cases are sometimes related, fixing the second case also requires fixing the first case, so fix them together. Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 4e1d4be6 ] According to the hip06 Datasheet: 1. The offset of INGRESS_SW_VLAN_TAG_DISC should be 0x1A00+4*all_chn_num 2. The offset of INGRESS_IN_DATA_STP_DISC should be 0x1A50+4*all_chn_num Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 51367e42 ] The get_mac_address() function is normally inline, but when it is not, we get a warning that this configuration is broken: WARNING: vmlinux.o(.text+0x4aff00): Section mismatch in reference from the function w90p910_ether_setup() to the function .init.text:get_mac_address() The function w90p910_ether_setup() references the function __init get_mac_address(). This is often because w90p910_ether_setup lacks a __init Remove the __init to make it always do the right thing. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 2ab4c342 ] Clang warns: drivers/net/ethernet/apm/xgene/xgene_enet_main.c:33:36: warning: tentative array definition assumed to have one element static const struct acpi_device_id xgene_enet_acpi_match[]; ^ 1 warning generated. Both xgene_enet_acpi_match and xgene_enet_of_match are defined before their uses at the bottom of the file so this is unnecessary. When CONFIG_ACPI is disabled, ACPI_PTR becomes NULL so xgene_enet_acpi_match doesn't need to be defined. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Sinan Kaya authored
[ Upstream commit c629421a ] Need to be able to boot without PCI devices present. Signed-off-by:
Sinan Kaya <okaya@kernel.org> Signed-off-by:
-
Varun Prakash authored
[ Upstream commit 9e6371d3 ] Add missing spin_lock_init() for cdev->np_lock. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Varun Prakash authored
[ Upstream commit 801df68d ] csk leak can happen if a new TCP connection gets established after cxgbit_accept_np() returns, to fix this leak free remaining csk in cxgbit_free_np(). Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit 9061193c ] Driver sends update-SVID ramrod in the MFW notification path. If there is a pending ramrod, driver doesn't retry the command and storm firmware will never be updated with the SVID value. The patch adds changes to send update-svid ramrod in process context with retry/poll flags set. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit 04f05230 ] Vlans are not getting removed when drivers are unloaded. The recent storm firmware versions had added safeguards against re-configuring an already configured vlan. As a result, PF inner reload flows (e.g., mtu change) might trigger an assertion. This change is going to remove vlans (same as we do for MACs) when doing a chip cleanup during unload. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit bbf666c1 ] On some customer setups it was observed that shmem contains a non-zero fip MAC for 57711 which would lead to enabling of SW FCoE. Add a software workaround to clear the bad fip mac address if no FCoE connections are supported. Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 542fbda0 ] The dst entry might already have a zero refcount, waiting on rcu list to be free'd. Using dst_hold() transitions its reference count to 1, and next dst release will try to free it again -- resulting in a double free: WARNING: CPU: 1 PID: 0 at include/net/dst.h:239 nf_xfrm_me_harder+0xe7/0x130 [nf_nat] RIP: 0010:nf_xfrm_me_harder+0xe7/0x130 [nf_nat] Code: 48 8b 5c 24 60 65 48 33 1c 25 28 00 00 00 75 53 48 83 c4 68 5b 5d 41 5c c3 85 c0 74 0d 8d 48 01 f0 0f b1 0a 74 86 85 c0 75 f3 <0f> 0b e9 7b ff ff ff 29 c6 31 d2 b9 20 00 48 00 4c 89 e7 e8 31 27 Call Trace: nf_nat_ipv4_out+0x78/0x90 [nf_nat_ipv4] nf_hook_slow+0x36/0xd0 ip_output+0x9f/0xd0 ip_forward+0x328/0x440 ip_rcv+0x8a/0xb0 Use dst_hold_safe instead and bail out if we cannot take a reference. Fixes: a4c2fd7f ("net: remove DST_NOCACHE flag") Reported-by:
Martin Zaharinov <micron10@gmail.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 708abf74 ] In the error handling block, nla_nest_cancel(skb, atd) is called to cancel the nest operation. But then, ipset_nest_end(skb, atd) is unexpected called to end the nest operation. This patch calls the ipset_nest_end only on the branch that nla_nest_cancel is not called. Fixes: 45040978 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Stefan Assmann authored
[ Upstream commit 158daed1 ] A previous commit moved the ether_addr_copy() in i40e_set_mac() before the mac filter del/add to avoid a race. However it wasn't taken into account that this alters the mac address being handed to i40e_del_mac_filter(). Also changed i40e_add_mac_filter() to operate on netdev->dev_addr, hopefully that makes the code easier to read. Fixes: 458867b2 ("i40e: don't remove netdev->dev_addr when syncing uc list") Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Acked-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Kirill A. Shutemov authored
[ Upstream commit 254eb550 ] The LDT remap placement has been changed. It's now placed before the direct mapping in the kernel virtual address space for both paging modes. Change address markers order accordingly. Fixes: d52888aa ("x86/mm: Move LDT remap out of KASLR region on 5-level paging") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: luto@kernel.org Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: bhe@redhat.com Cc: hans.van.kranenburg@mendix.com Cc: linux-mm@kvack.org Cc: xen-devel@lists.xenproject.org Link: https://lkml.kernel.org/r/20181130202328.65359-3-kirill.shutemov@linux.intel.comSigned-off-by:
-
Kirill A. Shutemov authored
[ Upstream commit 16877a55 ] There is a guard hole at the beginning of the kernel address space, also used by hypervisors. It occupies 16 PGD entries. This reserved range is not defined explicitely, it is calculated relative to other entities: direct mapping and user space ranges. The calculation got broken by recent changes of the kernel memory layout: LDT remap range is now mapped before direct mapping and makes the calculation invalid. The breakage leads to crash on Xen dom0 boot[1]. Define the reserved range explicitely. It's part of kernel ABI (hypervisors expect it to be stable) and must not depend on changes in the rest of kernel memory layout. [1] https://lists.xenproject.org/archives/html/xen-devel/2018-11/msg03313.html Fixes: d52888aa ("x86/mm: Move LDT remap out of KASLR region on 5-level paging") Reported-by:
Hans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: luto@kernel.org Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: bhe@redhat.com Cc: linux-mm@kvack.org Cc: xen-devel@lists.xenproject.org Link: https://lkml.kernel.org/r/20181130202328.65359-2-kirill.shutemov@linux.intel.comSigned-off-by:
-
YueHaibing authored
[ Upstream commit 8e41cae6 ] gcc warning this: drivers/net/ieee802154/ca8210.c:730:10: warning: comparison is always false due to limited range of data type [-Wtype-limits] 'len' is u8 type, we get it from buf[1] adding 2, which can overflow. This patch change the type of 'len' to unsigned int to avoid this,also fix the gcc warning. Fixes: ded845a7 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Thomas Falcon authored
[ Upstream commit 1d1bbc37 ] ibmvnic_reset allocated new reset work item objects in a non-atomic context. This can be called from a tasklet, generating the output below. Allocate work items with the GFP_ATOMIC flag instead. BUG: sleeping function called from invalid context at mm/slab.h:421 in_atomic(): 1, irqs_disabled(): 1, pid: 93, name: kworker/0:2 INFO: lockdep is turned off. irq event stamp: 66049 hardirqs last enabled at (66048): [<c000000000122468>] tasklet_action_common.isra.12+0x78/0x1c0 hardirqs last disabled at (66049): [<c000000000befce8>] _raw_spin_lock_irqsave+0x48/0xf0 softirqs last enabled at (66044): [<c000000000a8ac78>] dev_deactivate_queue.constprop.28+0xc8/0x160 softirqs last disabled at (66045): [<c0000000000306e0>] call_do_softirq+0x14/0x24 CPU: 0 PID: 93 Comm: kworker/0:2 Kdump: loaded Not tainted 4.20.0-rc6-00001-g1b50a8f03706 #7 Workqueue: events linkwatch_event Call Trace: [c0000003fffe7ae0] [c000000000bc83e4] dump_stack+0xe8/0x164 (unreliable) [c0000003fffe7b30] [c00000000015ba0c] ___might_sleep+0x2dc/0x320 [c0000003fffe7bb0] [c000000000391514] kmem_cache_alloc_trace+0x3e4/0x440 [c0000003fffe7c30] [d000000005b2309c] ibmvnic_reset+0x16c/0x360 [ibmvnic] [c0000003fffe7cc0] [d000000005b29834] ibmvnic_tasklet+0x1054/0x2010 [ibmvnic] [c0000003fffe7e00] [c0000000001224c8] tasklet_action_common.isra.12+0xd8/0x1c0 [c0000003fffe7e60] [c000000000bf1238] __do_softirq+0x1a8/0x64c [c0000003fffe7f90] [c0000000000306e0] call_do_softirq+0x14/0x24 [c0000003f3967980] [c00000000001ba50] do_softirq_own_stack+0x60/0xb0 [c0000003f39679c0] [c0000000001218a8] do_softirq+0xa8/0x100 [c0000003f39679f0] [c000000000121a74] __local_bh_enable_ip+0x174/0x180 [c0000003f3967a60] [c000000000bf003c] _raw_spin_unlock_bh+0x5c/0x80 [c0000003f3967a90] [c000000000a8ac78] dev_deactivate_queue.constprop.28+0xc8/0x160 [c0000003f3967ad0] [c000000000a8c8b0] dev_deactivate_many+0xd0/0x520 [c0000003f3967b70] [c000000000a8cd40] dev_deactivate+0x40/0x60 [c0000003f3967ba0] [c000000000a5e0c4] linkwatch_do_dev+0x74/0xd0 [c0000003f3967bd0] [c000000000a5e694] __linkwatch_run_queue+0x1a4/0x1f0 [c0000003f3967c30] [c000000000a5e728] linkwatch_event+0x48/0x60 [c0000003f3967c50] [c0000000001444e8] process_one_work+0x238/0x710 [c0000003f3967d20] [c000000000144a48] worker_thread+0x88/0x4e0 [c0000003f3967db0] [c00000000014e3a8] kthread+0x178/0x1c0 [c0000003f3967e20] [c00000000000bfd0] ret_from_kernel_thread+0x5c/0x6c Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Yussuf Khalil authored
[ Upstream commit ca504728 ] Before commit 7fd6d98b ("i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus"), enabling RMI on the T560 would cause the touchpad to stop working after resuming from suspend. Now that this issue is fixed, RMI can be enabled safely and works fine. Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Yussuf Khalil <dev@pp3345.net> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit e2ca26ec ] With PM enabled, I noticed that pressing a key on the droid4 keyboard will block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as suggested by Dmitry Torokhov <dmitry.torokhov@gmail.com>. From the hardware point of view, looks like we need to manage the registers for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE register now gone with IRQF_ONESHOT, also the SoC idle state problem is gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent blocking deeper SoC idle states after rmmod omap4-keypad. Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 9ae4f842 ] If "interface" is NULL then we can't release it and trying to will only lead to an Oops. Fixes: aea71a02 ("[SCSI] bnx2fc: Introduce interface structure for each vlan interface") Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 530aad77 ] When adjusting sack block sequence numbers, skb_make_writable() gets called to make sure tcp options are all in the linear area, and buffer is not shared. This can cause tcp header pointer to get reallocated, so we must reaload it to avoid memory corruption. This bug pre-dates git history. Reported-by:
Neel Mehta <nmehta@google.com> Reported-by:
Shane Huntley <shuntley@google.com> Reported-by:
Heather Adkins <argv@google.com> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit 0152eee6 ] Since commit 222d7dbd ("net: prevent dst uses after free") skb_dst_force() might clear the dst_entry attached to the skb. The xfrm code doesn't expect this to happen, so we crash with a NULL pointer dereference in this case. Fix it by checking skb_dst(skb) for NULL after skb_dst_force() and drop the packet in case the dst_entry was cleared. We also move the skb_dst_force() to a codepath that is not used when the transformation was offloaded, because in this case we don't have a dst_entry attached to the skb. The output and forwarding path was already fixed by commit 9e143793 ("xfrm: Fix NULL pointer dereference when skb_dst_force clears the dst_entry.") Fixes: 222d7dbd ("net: prevent dst uses after free") Reported-by:
Jean-Philippe Menil <jpmenil@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Benjamin Poirier authored
[ Upstream commit ca92e173 ] sadhcnt is reported by `ip -s xfrm state count` as "buckets count", not the hash mask. Fixes: 28d8909b ("[XFRM]: Export SAD info.") Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 533555e5 ] xfrm_output_one() does not return a error code when there is no dst_entry attached to the skb, it is still possible crash with a NULL pointer dereference in xfrm_output_resume(). Fix it by return error code -EHOSTUNREACH. Fixes: 9e143793 ("xfrm: Fix NULL pointer dereference when skb_dst_force clears the dst_entry.") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
