Fix the following sparse warnings:

drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:663:32: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:663:32:    expected restricted __le16 [usertype] frame_ctl
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:663:32:    got int
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:664:50: warning: invalid assignment: |=
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:664:50:    left side has type restricted __le16
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:664:50:    right side has type int
Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

auth_parse() return result is in incorrect le16 byte order. Currently
this still works since the user code merely checks if error code is
equal to 0. However debug statement in ieee80211_check_auth_response()
prints the error code in the incorrect le16 byte order. This fix
corrects the byte order as cpu order.
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The underflow in OZ_DATA_F_ISOC_FIXED seems not harmful, but this patch
is a clean up and makes my static checker a bit happier.

The underflow in OZ_VENDOR_CLASS_RSP seems like it could result in
memory corruption.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed coding style issue line "over 80 characters" detected by
checkpatch.pl in r819xU_firmware.h
Signed-off-by: Buţiu Alexandru Octavian <predator5047@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed commented macro that was no longer needed
Signed-off-by: Buţiu Alexandru Octavian <predator5047@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a table to get a channel plan from a given country code.This was a
TODO mentioned as a comment in the driver.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We already have a inline pci_get_bus_and_slot() in include/linux/pci.h,
Use it instead of local one.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix reported by coccinelle compressing last two lines with single return
call
Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the bus device was created the list_all variables were not
being initialized. When the CONTROLVM_BUS_CONFIGURE message
was being sent, it was failing to find the bus and produced a
panic. Initialize the bus_info->list_all variable by doing a
INIT_LIST_HEAD.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When unloading a module, we need to cleanup the platform registration.
However, unregistering the platform uncovered a couple of quirks, namely
a missing device_release function.  Fix things up so module unload works
and allows us to reload the module.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When we combined visorchipset and visorbus into one driver we negelected
to strip out some of the MODULE_ stuff from one of the files.  When
building the drivers in, it causes a WARN that we try to create
/proc/modules/visorbus/version when it is already created.

visorchipset.c is the driver entry point, remove the cruft from
visorbus_main.c.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Get rid of unused values in the enum.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Diagchannel.h is used primarily for the diagnostics channel. The
diagnostics channel is not being used by linux guests currently, so
the majority of the file is not needed. What is left is what is
needed to perform postcode vmcalls. Those postcodes will eventually
end up in the diag channel.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Give the enum the correct values instead of based on other values.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

min_size/max_size aren't used anywhere, and they were just causing
headaches in the drivers being ported over to the new interfaces.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the legacy dev_info struct and instead creates
and passes around a traditional struct device.

This allows us to remove a lot of the various look up code and
removes the doubt if the struct exists or not.

Half of the churn is just the conversion of visorchipset_device_info
to visor_device.  Various cleanups include re-arranging the failure
paths to make more sense.

Pay attention to the create_visor_device function.  This had a lot of
churn to simplify everything.

Lots of functions disappeared because they are not needed any more.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the legacy bus_info struct and instead creates
and passes around a traditional struct device.

This allows us to remove a lot of the various look up code and
removes the doubt if the struct exists or not.

Half of the churn is just the conversion of visorchipset_bus_info
to visor_device.  Various cleanups include re-arranging the failure
paths to make more sense.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I used 0 as the device id for the bus root, neglecting the fact that
device 0 is a valid id in Unisys's configuration.  Modify this to
use UINT_MAX instead as a unique number.

As fallout from this change it was noticed the bus_no and dev_no was not
defined the same way consistently.  Fix visorbus.h to use u32 there.  Fix
the resulting printk warning too.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The bus driver doesn't work in server mode, just remove the left over
pieces.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing stuff that isn't being used.  Another prepartion patch to
allow us to use visor_device everywhere without the baggage of
bus/dev_info.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The bus device and regular device were using two different
structs.  Let's combine them as they are not entirely different
from one another.

This allows us to move this creation up the stack later and
actually remove bus/dev_info easily.

Most of the churn is just renaming devdata -> dev and 'struct
visorbus_devdata' to 'struct visor_device'.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This change was detected with help of checkpatch.pl script.
Signed-off-by: Chaitanya Dhere <cvijaydh@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In this patch, the if, else conditions are modified to remove the
unnecessary equality checks. This change was detected with help of
coccinelle tool.
Signed-off-by: Chaitanya Dhere <cvijaydh@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Style (line over 80 chars) in drivers/staging/wlan-ng/prism2fw.c
Signed-off-by: Douglas Barbonaglia Sathler Figueiredo <eng.douglasfigueiredo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

removed the commented INFO lines.
Signed-off-by: Madhusudhanan Ravindran <mravindr@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed indentation issue in few lines
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remove an unwanted assignment to a variable which is overwritten in the
very next line.The first value assigned is not used.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the ununsed Macro
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Insert Spaces after commas to rectify the
following checkpatch errors in ddk750_display.c:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Insert Spaces after commas to rectify the following
checkpatch errors in ddk750_help.c and ddk750_mode.c:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Insert Spaces after commas to rectify the following
checkpatch errors in ddk750_power.c and ddk750_swi2c.c:
ERROR: space required after that ','

Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>:
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Insert Spaces after commas to rectify the
following checkpatch errors in sm750_cursor.c:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Insert Spaces after commas to rectify the
following checkpatch errors in sm750_accel.c:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Insert Spaces after commas to rectify the
following checkpatch errors in sm750_hw.c:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Insert Spaces after commas to rectify the
following checkpatch errors in ddk750_hwi2c.h,
ddk750_help.h and ddk750_chip.h:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Insert Spaces after commas to rectify the
following checkpatch errors in sm750_cursor.h,
sm750_accel.h, ddk750_power.h and ddk750_mode.h:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Insert Spaces after commas to rectify the
following checkpatch errors in sm750.h:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Insert Spaces after commas to rectify the
following checkpatch errors in sm750_help.h:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Insert Spaces after commas in sm750_hw.h to rectify the
following checkpatch errors in sm750_hw.h:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sm750fb driver has few Framebuffer configuration dependencies that
need to be selected in order to get compiled successfully
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>