- 15 Jan, 2015 40 commits
-
-
Sagi Grimberg authored
commit 302cc7c3 upstream. Fallback to software mode DIF if HCA does not support PI (without crashing obviously). It is still possible to run with backend protection and an unprotected frontend, so looking at the command prot_op is not enough. Check device PI capability on a per-IO basis (isert_prot_cmd inline static) to determine if we need to handle protection information. Trace: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffffa037f8b1>] isert_reg_sig_mr+0x351/0x3b0 [ib_isert] Call Trace: [<ffffffff812b003a>] ? swiotlb_map_sg_attrs+0x7a/0x130 [<ffffffffa038184d>] isert_reg_rdma+0x2fd/0x370 [ib_isert] [<ffffffff8108f2ec>] ? idle_balance+0x6c/0x2c0 [<ffffffffa0382b68>] isert_put_datain+0x68/0x210 [ib_isert] [<ffffffffa02acf5b>] lio_queue_data_in+0x2b/0x30 [iscsi_target_mod] [<ffffffffa02306eb>] target_complete_ok_work+0x21b/0x310 [target_core_mod] [<ffffffff8106ece2>] process_one_work+0x182/0x3b0 [<ffffffff8106fda0>] worker_thread+0x120/0x3c0 [<ffffffff8106fc80>] ? maybe_create_worker+0x190/0x190 [<ffffffff8107594e>] kthread+0xce/0xf0 [<ffffffff81075880>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff8159a22c>] ret_from_fork+0x7c/0xb0 [<ffffffff81075880>] ? kthread_freezable_should_stop+0x70/0x70 Reported-by:
Slava Shwartsman <valyushash@gmail.com> Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Sagi Grimberg authored
commit 570db170 upstream. This patch converts to allocate PI contexts dynamically in order avoid a potentially bogus np->tpg_np and associated NULL pointer dereference in isert_connect_request() during iser-target endpoint shutdown with multiple network portals. Also, there is really no need to allocate these at connection establishment since it is not guaranteed that all the IOs on that connection will be to a PI formatted device. We can do it in a lazy fashion so the initial burst will have a transient slow down, but very fast all IOs will allocate a PI context. Squashed: iser-target: Centralize PI context handling code Signed-off-by:
-
Sagi Grimberg authored
commit b02efbfc upstream. In situations such as bond failover, The new session establishment implicitly invokes the termination of the old connection. So, we don't want to wait for the old connection wait_conn to completely terminate before we accept the new connection and post a login response. The solution is to deffer the comp_wait completion and the conn_put to a work so wait_conn will effectively be non-blocking (flush errors are assumed to come very fast). We allocate isert_release_wq with WQ_UNBOUND and WQ_UNBOUND_MAX_ACTIVE to spread the concurrency of release works. Reported-by:
-
Sagi Grimberg authored
commit ca6c1d82 upstream. The np listener cm_id will also get ADDR_CHANGE event upcall (in case it is bound to a specific IP). Handle it correctly by creating a new cm_id and implicitly destroy the old one. Since this is the second event a listener np cm_id may encounter, we move the np cm_id event handling to a routine. Squashed: iser-target: Move cma_id setup to a function Reported-by:
-
Sagi Grimberg authored
commit 19e2090f upstream. Take isert_conn pointer from cm_id->qp->qp_context. This will allow us to know that the cm_id context is always the network portal. This will make the cm_id event check (connection or network portal) more reliable. In order to avoid a NULL dereference in cma_id->qp->qp_context we destroy the qp after we destroy the cm_id (and make the dereference safe). session stablishment/teardown sequences can happen in parallel, we should take into account that connected_handler might race with connection teardown flow. Also, protect isert_conn->conn_device->active_qps decrement within the error patch during QP creation failure and the normal teardown path in isert_connect_release(). Squashed: iser-target: Decrement completion context active_qps in error flow Signed-off-by:
-
Sagi Grimberg authored
commit 2371e5da upstream. There is no point in accepting a new CM request only when we are completely done with the last iscsi login. Instead we accept immediately, this will also cause the CM connection to reach connected state and the initiator is allowed to send the first login. We mark that we got the initial login and let iscsi layer pick it up when it gets there. This reduces the parallel login sequence by a factor of more then 4 (and more for multi-login) and also prevents the initiator (who does all logins in parallel) from giving up on login timeout expiration. In order to support multiple login requests sequence (CHAP) we call isert_rx_login_req from isert_rx_completion insead of letting isert_get_login_rx call it. Squashed: iser-target: Use kref_get_unless_zero in connected_handler iser-target: Acquire conn_mutex when changing connection state iser-target: Reject connect request in failure path Signed-off-by:
-
Sagi Grimberg authored
commit 128e9cc8 upstream. ISER_CONN_UP state is not sufficient to know if we should wait for completion of flush errors and disconnected_handler event. Instead, split it to 2 states: - ISER_CONN_UP: Got to CM connected phase, This state indicates that we need to wait for a CM disconnect event before going to teardown. - ISER_CONN_FULL_FEATURE: Got to full feature phase after we posted login response, This state indicates that we posted recv buffers and we need to wait for flush completions before going to teardown. Also avoid deffering disconnected handler to a work, and handle it within disconnected handler. More work here is needed to handle DEVICE_REMOVAL event correctly (cleanup all resources). Squashed: iser-target: Don't deffer disconnected handler to a work Signed-off-by:
-
Sagi Grimberg authored
commit 954f2372 upstream. Since commit 0fc4ea70 ("Target/iser: Don't put isert_conn inside disconnected handler") we put the conn kref in isert_wait_conn, so we need .wait_conn to be invoked also in the error path. Introduce call to isert_conn_terminate (called under lock) which transitions the connection state to TERMINATING and calls rdma_disconnect. If the state is already teminating, just bail out back (temination started). Also, make sure to destroy the connection when getting a connect error event if didn't get to connected (state UP). Same for the handling of REJECTED and UNREACHABLE cma events. Squashed: iscsi-target: Add call to wait_conn in establishment error flow Reported-by:
-
Imre Deak authored
commit c352d1ba upstream. irq_mask should include all IRQ bits that we want to mask, but atm we set it incorrectly to the inverse of this. If the mask is used subsequently to enable/disable some IRQ bits, we may unintentionally unmask unrelated IRQs. I can't see any way that this can lead to a real problem in the current -nightly code, since the first place the mask will be used next (after a suspend/resume cycle) is in valleyview_irq_postinstall(), but the mask is reset there to its proper value. This causes a problem in the upstream kernel though, where - due to another issue - the mask is used in the above way to disable only the display IRQs. This other issue is fixed by: commit 950eabaf Author: Imre Deak <imre.deak@intel.com> Date: Mon Sep 8 15:21:09 2014 +0300 drm/i915: vlv: fix display IRQ enable/disable Interestingly, even with the above two bugs, we shouldn't in theory have any real problems (arguably a famous last sentence:). That's because even if we unmask something unintentionally via the VLV_IMR/VLV_IER register the master IRQ masking bit in VLV_MASTER_IER is still set and should prevent all i915 interrupts. According to my testing on an ASUS T100 with DSI output this isn't the case at least with the MIPIA_INTERRUPT. Leaving this one unmasked in IMR/IER, while having VLV_MASTER_IER set to 0 may lead to a lockup during system suspend as shown in the bugzilla ticket below. This fix should get rid of the problem reported there in upstream and older kernels. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85920Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Jiri Olsa authored
commit 9fc81d87 upstream. We allow PMU driver to change the cpu on which the event should be installed to. This happened in patch: e2d37cd2 ("perf: Allow the PMU driver to choose the CPU on which to install events") This patch also forces all the group members to follow the currently opened events cpu if the group happened to be moved. This and the change of event->cpu in perf_install_in_context() function introduced in: 0cda4c02 ("perf: Introduce perf_pmu_migrate_context()") forces group members to change their event->cpu, if the currently-opened-event's PMU changed the cpu and there is a group move. Above behaviour causes problem for breakpoint events, which uses event->cpu to touch cpu specific data for breakpoints accounting. By changing event->cpu, some breakpoints slots were wrongly accounted for given cpu. Vinces's perf fuzzer hit this issue and caused following WARN on my setup: WARNING: CPU: 0 PID: 20214 at arch/x86/kernel/hw_breakpoint.c:119 arch_install_hw_breakpoint+0x142/0x150() Can't find any breakpoint slot [...] This patch changes the group moving code to keep the event's original cpu. Reported-by:
Vince Weaver <vince@deater.net> Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vince@deater.net> Cc: Yan, Zheng <zheng.z.yan@intel.com> Link: http://lkml.kernel.org/r/1418243031-20367-3-git-send-email-jolsa@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jiri Olsa authored
commit af91568e upstream. The uncore_collect_events functions assumes that event group might contain only uncore events which is wrong, because it might contain any type of events. This bug leads to uncore framework touching 'not' uncore events, which could end up all sorts of bugs. One was triggered by Vince's perf fuzzer, when the uncore code touched breakpoint event private event space as if it was uncore event and caused BUG: BUG: unable to handle kernel paging request at ffffffff82822068 IP: [<ffffffff81020338>] uncore_assign_events+0x188/0x250 ... The code in uncore_assign_events() function was looking for event->hw.idx data while the event was initialized as a breakpoint with different members in event->hw union. This patch forces uncore_collect_events() to collect only uncore events. Reported-by:
-
Filipe Manana authored
commit 678886bd upstream. When we abort a transaction we iterate over all the ranges marked as dirty in fs_info->freed_extents[0] and fs_info->freed_extents[1], clear them from those trees, add them back (unpin) to the free space caches and, if the fs was mounted with "-o discard", perform a discard on those regions. Also, after adding the regions to the free space caches, a fitrim ioctl call can see those ranges in a block group's free space cache and perform a discard on the ranges, so the same issue can happen without "-o discard" as well. This causes corruption, affecting one or multiple btree nodes (in the worst case leaving the fs unmountable) because some of those ranges (the ones in the fs_info->pinned_extents tree) correspond to btree nodes/leafs that are referred by the last committed super block - breaking the rule that anything that was committed by a transaction is untouched until the next transaction commits successfully. I ran into this while running in a loop (for several hours) the fstest that I recently submitted: [PATCH] fstests: add btrfs test to stress chunk allocation/removal and fstrim The corruption always happened when a transaction aborted and then fsck complained like this: _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent *** fsck.btrfs output *** Check tree block failed, want=94945280, have=0 Check tree block failed, want=94945280, have=0 Check tree block failed, want=94945280, have=0 Check tree block failed, want=94945280, have=0 Check tree block failed, want=94945280, have=0 read block failed check_tree_block Couldn't open file system In this case 94945280 corresponded to the root of a tree. Using frace what I observed was the following sequence of steps happened: 1) transaction N started, fs_info->pinned_extents pointed to fs_info->freed_extents[0]; 2) node/eb 94945280 is created; 3) eb is persisted to disk; 4) transaction N commit starts, fs_info->pinned_extents now points to fs_info->freed_extents[1], and transaction N completes; 5) transaction N + 1 starts; 6) eb is COWed, and btrfs_free_tree_block() called for this eb; 7) eb range (94945280 to 94945280 + 16Kb) is added to fs_info->pinned_extents (fs_info->freed_extents[1]); 8) Something goes wrong in transaction N + 1, like hitting ENOSPC for example, and the transaction is aborted, turning the fs into readonly mode. The stack trace I got for example: [112065.253935] [<ffffffff8140c7b6>] dump_stack+0x4d/0x66 [112065.254271] [<ffffffff81042984>] warn_slowpath_common+0x7f/0x98 [112065.254567] [<ffffffffa0325990>] ? __btrfs_abort_transaction+0x50/0x10b [btrfs] [112065.261674] [<ffffffff810429e5>] warn_slowpath_fmt+0x48/0x50 [112065.261922] [<ffffffffa032949e>] ? btrfs_free_path+0x26/0x29 [btrfs] [112065.262211] [<ffffffffa0325990>] __btrfs_abort_transaction+0x50/0x10b [btrfs] [112065.262545] [<ffffffffa036b1d6>] btrfs_remove_chunk+0x537/0x58b [btrfs] [112065.262771] [<ffffffffa033840f>] btrfs_delete_unused_bgs+0x1de/0x21b [btrfs] [112065.263105] [<ffffffffa0343106>] cleaner_kthread+0x100/0x12f [btrfs] (...) [112065.264493] ---[ end trace dd7903a975a31a08 ]--- [112065.264673] BTRFS: error (device sdc) in btrfs_remove_chunk:2625: errno=-28 No space left [112065.264997] BTRFS info (device sdc): forced readonly 9) The clear kthread sees that the BTRFS_FS_STATE_ERROR bit is set in fs_info->fs_state and calls btrfs_cleanup_transaction(), which in turn calls btrfs_destroy_pinned_extent(); 10) Then btrfs_destroy_pinned_extent() iterates over all the ranges marked as dirty in fs_info->freed_extents[], and for each one it calls discard, if the fs was mounted with "-o discard", and adds the range to the free space cache of the respective block group; 11) btrfs_trim_block_group(), invoked from the fitrim ioctl code path, sees the free space entries and performs a discard; 12) After an umount and mount (or fsck), our eb's location on disk was full of zeroes, and it should have been untouched, because it was marked as dirty in the fs_info->pinned_extents tree, and therefore used by the trees that the last committed superblock points to. Fix this by not performing a discard and not adding the ranges to the free space caches - it's useless from this point since the fs is now in readonly mode and we won't write free space caches to disk anymore (otherwise we would leak space) nor any new superblock. By not adding the ranges to the free space caches, it prevents other code paths from allocating that space and write to it as well, therefore being safer and simpler. This isn't a new problem, as it's been present since 2011 (git commit acce952b). Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Peter Rosin authored
commit 681a1956 upstream. When the codec is connected using i2c, it will only auto-increment register addresses if msb (0x80) of the register address byte is set. [Fixes cache sync if multiple adjacent registers are updated -- broonie] Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Sreekanth Reddy authored
commit 2311ce4d upstream. This reverts commit 963ba22b ("mpt3sas: Remove phys on topology change") Reverting the previous mpt3sas drives patch changes, since we will observe below issue Issue: Drives connected Enclosure/Expander will unregister with SCSI Transport Layer, if any one remove and add expander cable with in DMD (Device Missing Delay) time period or even any one power-off and power-on the Enclosure with in the DMD period. Signed-off-by:
Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Sreekanth Reddy authored
commit 81a89c2d upstream. This reverts commit 3520f9c7 ("mpt2sas: Remove phys on topology change") Reverting the previous mpt2sas drives patch changes, since we will observe below issue Issue: Drives connected Enclosure/Expander will unregister with SCSI Transport Layer, if any one remove and add expander cable with in DMD (Device Missing Delay) time period or even any one power-off and power-on the Enclosure with in the DMD period. Signed-off-by:
-
Krzysztof Kozlowski authored
commit c31844ff upstream. During driver unbind the syscore ops were not unregistered which lead to double add on syscore list: $ echo "3810000.audss-clock-controller" > /sys/bus/platform/drivers/exynos-audss-clk/unbind $ echo "3810000.audss-clock-controller" > /sys/bus/platform/drivers/exynos-audss-clk/bind [ 1463.044061] ------------[ cut here ]------------ [ 1463.047255] WARNING: CPU: 0 PID: 1 at lib/list_debug.c:36 __list_add+0x8c/0xc0() [ 1463.054613] list_add double add: new=c06e52c0, prev=c06e52c0, next=c06d5f84. [ 1463.061625] Modules linked in: [ 1463.064623] CPU: 0 PID: 1 Comm: bash Tainted: G W 3.18.0-rc5-next-20141121-00005-ga8fab06eab42-dirty #1022 [ 1463.075338] [<c0014e2c>] (unwind_backtrace) from [<c0011d80>] (show_stack+0x10/0x14) [ 1463.083046] [<c0011d80>] (show_stack) from [<c048bb70>] (dump_stack+0x70/0xbc) [ 1463.090236] [<c048bb70>] (dump_stack) from [<c00233d4>] (warn_slowpath_common+0x74/0xb0) [ 1463.098295] [<c00233d4>] (warn_slowpath_common) from [<c00234a4>] (warn_slowpath_fmt+0x30/0x40) [ 1463.106962] [<c00234a4>] (warn_slowpath_fmt) from [<c020fe80>] (__list_add+0x8c/0xc0) [ 1463.114760] [<c020fe80>] (__list_add) from [<c0282094>] (register_syscore_ops+0x30/0x3c) [ 1463.122819] [<c0282094>] (register_syscore_ops) from [<c0392f20>] (exynos_audss_clk_probe+0x36c/0x460) [ 1463.132091] [<c0392f20>] (exynos_audss_clk_probe) from [<c0283084>] (platform_drv_probe+0x48/0xa4) [ 1463.141013] [<c0283084>] (platform_drv_probe) from [<c0281a14>] (driver_probe_device+0x13c/0x37c) [ 1463.149852] [<c0281a14>] (driver_probe_device) from [<c0280560>] (bind_store+0x90/0xe0) [ 1463.157822] [<c0280560>] (bind_store) from [<c027fd10>] (drv_attr_store+0x20/0x2c) [ 1463.165363] [<c027fd10>] (drv_attr_store) from [<c0143898>] (sysfs_kf_write+0x4c/0x50) [ 1463.173252] [<c0143898>] (sysfs_kf_write) from [<c0142c80>] (kernfs_fop_write+0xbc/0x198) [ 1463.181395] [<c0142c80>] (kernfs_fop_write) from [<c00e2be0>] (vfs_write+0xa0/0x1a8) [ 1463.189104] [<c00e2be0>] (vfs_write) from [<c00e2f00>] (SyS_write+0x40/0x8c) [ 1463.196122] [<c00e2f00>] (SyS_write) from [<c000f2a0>] (ret_fast_syscall+0x0/0x48) [ 1463.203655] ---[ end trace 08f6710c9bc8d8f3 ]--- [ 1463.208244] exynos-audss-clk 3810000.audss-clock-controller: setup completed Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 1241ef94 ("clk: samsung: register audio subsystem clocks using common clock framework") Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Hannes Reinecke authored
commit 506787a2 upstream. tcm_loop has the I_T nexus associated with the HBA. This causes commands to become misdirected if the HBA has more than one target portal group; any command is then being sent to the first target portal group instead of the correct one. The nexus needs to be associated with the target portal group instead. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Michael Halcrow authored
commit 94208064 upstream. Dmitry Chernenkov used KASAN to discover that eCryptfs writes past the end of the allocated buffer during encrypted filename decoding. This fix corrects the issue by getting rid of the unnecessary 0 write when the current bit offset is 2. Signed-off-by:
Michael Halcrow <mhalcrow@google.com> Reported-by:
Dmitry Chernenkov <dmitryc@google.com> Suggested-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Tyler Hicks authored
commit 332b122d upstream. The ecryptfs_encrypted_view mount option greatly changes the functionality of an eCryptfs mount. Instead of encrypting and decrypting lower files, it provides a unified view of the encrypted files in the lower filesystem. The presence of the ecryptfs_encrypted_view mount option is intended to force a read-only mount and modifying files is not supported when the feature is in use. See the following commit for more information: e77a56dd [PATCH] eCryptfs: Encrypted passthrough This patch forces the mount to be read-only when the ecryptfs_encrypted_view mount option is specified by setting the MS_RDONLY flag on the superblock. Additionally, this patch removes some broken logic in ecryptfs_open() that attempted to prevent modifications of files when the encrypted view feature was in use. The check in ecryptfs_open() was not sufficient to prevent file modifications using system calls that do not operate on a file descriptor. Signed-off-by:
Priya Bansal <p.bansal@samsung.com> Signed-off-by:
-
Uwe Kleine-König authored
commit ab1e8537 upstream. Commit a095b1c7 ("ARM: mvebu: sort DT nodes by address") missed placing the system-controller in the correct order. Fixes: a095b1c7 ("ARM: mvebu: sort DT nodes by address") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/20141114204333.GS27002@pengutronix.deSigned-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Mikulas Patocka authored
commit 17181fb7 upstream. As long as struct thin_c is in the list, anyone can grab a reference of it. Consequently, we must wait for the reference count to drop to zero *after* we remove the structure from the list, not before. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit c1c6156f upstream. This function isn't right and it causes a static checker warning: drivers/md/dm-thin.c:3016 maybe_resize_data_dev() error: potentially using uninitialized 'sb_data_size'. It should set "*count" and return zero on success the same as the sm_metadata_get_nr_blocks() function does earlier. Fixes: 3241b1d3 ('dm: add persistent data library') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Peter Guo authored
commit 6380ea09 upstream. Fix Dell E5440 when reboot Linux, can't find o2micro sd host chip issue. Fixes: 01acf691 (mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts) Signed-off-by:
Peter Guo <peter.guo@bayhubtech.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Ulf Hansson authored
commit 903101a8 upstream. The commit, mmc: omap: clarify DDR timing mode between SD-UHS and eMMC, switched omap_hsmmc to support MMC DDR mode instead of UHS DDR50 mode. Add UHS DDR50 mode again and this time let's also keep the MMC DDR mode. Fixes: 5438ad95 (mmc: omap: clarify DDR timing mode between SD-UHS and eMMC) Reported-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Baruch Siach authored
commit 0031a98a upstream. Make force_ro consistent with other sysfs entries. Fixes: 371a689f ('mmc: MMC boot partitions support') Cc: Andrei Warkentin <andrey.warkentin@gmail.com> Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
NeilBrown authored
commit 4b5060dd upstream. If two threads call bitmap_unplug at the same time, then one might schedule all the writes, and the other might decide that it doesn't need to wait. But really it does. It rarely hurts to wait when it isn't absolutely necessary, and the current code doesn't really focus on 'absolutely necessary' anyway. So just wait always. This can potentially lead to data corruption if a crash happens at an awkward time and data was written before the bitmap was updated. It is very unlikely, but this should go to -stable just to be safe. Appropriate for any -stable. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Junxiao Bi authored
commit 136f49b9 upstream. For buffer write, page lock will be got in write_begin and released in write_end, in ocfs2_write_end_nolock(), before it unlock the page in ocfs2_free_write_ctxt(), it calls ocfs2_run_deallocs(), this will ask for the read lock of journal->j_trans_barrier. Holding page lock and ask for journal->j_trans_barrier breaks the locking order. This will cause a deadlock with journal commit threads, ocfs2cmt will get write lock of journal->j_trans_barrier first, then it wakes up kjournald2 to do the commit work, at last it waits until done. To commit journal, kjournald2 needs flushing data first, it needs get the cache page lock. Since some ocfs2 cluster locks are holding by write process, this deadlock may hung the whole cluster. unlock pages before ocfs2_run_deallocs() can fix the locking order, also put unlock before ocfs2_commit_trans() to make page lock is unlocked before j_trans_barrier to preserve unlocking order. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric W. Biederman authored
commit c297abfd upstream. While reviewing the code of umount_tree I realized that when we append to a preexisting unmounted list we do not change pprev of the former first item in the list. Which means later in namespace_unlock hlist_del_init(&mnt->mnt_hash) on the former first item of the list will stomp unmounted.first leaving it set to some random mount point which we are likely to free soon. This isn't likely to hit, but if it does I don't know how anyone could track it down. [ This happened because we don't have all the same operations for hlist's as we do for normal doubly-linked lists. In particular, list_splice() is easy on our standard doubly-linked lists, while hlist_splice() doesn't exist and needs both start/end entries of the hlist. And commit 38129a13 incorrectly open-coded that missing hlist_splice(). We should think about making these kinds of "mindless" conversions easier to get right by adding the missing hlist helpers - Linus ] Fixes: 38129a13 switch mnt_hash to hlist Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Dan Carpenter authored
commit 021b77be upstream. Probably this code was syncing a lot more often then intended because the do_sync variable wasn't set to zero. Fixes: c62988ec ('ceph: avoid meaningless calling ceph_caps_revoking if sync_mode == WB_SYNC_ALL.') Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Signed-off-by:
-
Johannes Berg authored
commit 28a9bc68 upstream. When writing the code to allow per-station GTKs, I neglected to take into account the management frame keys (index 4 and 5) when freeing the station and only added code to free the first four data frame keys. Fix this by iterating the array of keys over the right length. Fixes: e31b8213 ("cfg80211/mac80211: allow per-station GTKs") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jan Kara authored
commit f54e18f1 upstream. Rock Ridge extensions define so called Continuation Entries (CE) which define where is further space with Rock Ridge data. Corrupted isofs image can contain arbitrarily long chain of these, including a one containing loop and thus causing kernel to end in an infinite loop when traversing these entries. Limit the traversal to 32 entries which should be more than enough space to store all the Rock Ridge data. Reported-by:
P J P <ppandit@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Vineet Gupta authored
commit e8ef060b upstream. This allows the sdplite/Zebu images to run on OSCI simulation platform Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Andy Lutomirski authored
commit 0e58af4e upstream. Users have no business installing custom code segments into the GDT, and segments that are not present but are otherwise valid are a historical source of interesting attacks. For completeness, block attempts to set the L bit. (Prior to this patch, the L bit would have been silently dropped.) This is an ABI break. I've checked glibc, musl, and Wine, and none of them look like they'll have any trouble. Note to stable maintainers: this is a hardening patch that fixes no known bugs. Given the possibility of ABI issues, this probably shouldn't be backported quickly. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
H. Peter Anvin <hpa@zytor.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: security@kernel.org <security@kernel.org> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Andy Lutomirski authored
commit 41bdc785 upstream. Installing a 16-bit RW data segment into the GDT defeats espfix. AFAICT this will not affect glibc, Wine, or dosemu at all. Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit aee4e5f3 upstream. When recording the state of a task for the sched_switch tracepoint a check of task_preempt_count() is performed to see if PREEMPT_ACTIVE is set. This is because, technically, a task being preempted is really in the TASK_RUNNING state, and that is what should be recorded when tracing a sched_switch, even if the task put itself into another state (it hasn't scheduled out in that state yet). But with the change to use per_cpu preempt counts, the task_thread_info(p)->preempt_count is no longer used, and instead task_preempt_count(p) is used. The problem is that this does not use the current preempt count but a stale one from a previous sched_switch. The task_preempt_count(p) uses saved_preempt_count and not preempt_count(). But for tracing sched_switch, if p is current, we really want preempt_count(). I hit this bug when I was tracing sleep and the call from do_nanosleep() scheduled out in the "RUNNING" state. sleep-4290 [000] 537272.259992: sched_switch: sleep:4290 [120] R ==> swapper/0:0 [120] sleep-4290 [000] 537272.260015: kernel_stack: <stack trace> => __schedule (ffffffff8150864a) => schedule (ffffffff815089f8) => do_nanosleep (ffffffff8150b76c) => hrtimer_nanosleep (ffffffff8108d66b) => SyS_nanosleep (ffffffff8108d750) => return_to_handler (ffffffff8150e8e5) => tracesys_phase2 (ffffffff8150c844) After a bit of hair pulling, I found that the state was really TASK_INTERRUPTIBLE, but the saved_preempt_count had an old PREEMPT_ACTIVE set and caused the sched_switch tracepoint to show it as RUNNING. Link: http://lkml.kernel.org/r/20141210174428.3cb7542a@gandalf.local.homeAcked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Brian Norris authored
commit 68f29815 upstream. The torture test should quit once it actually induces an error in the flash. This step was accidentally removed during refactoring. Without this fix, the torturetest just continues infinitely, or until the maximum cycle count is reached. e.g.: ... [ 7619.218171] mtd_test: error -5 while erasing EB 100 [ 7619.297981] mtd_test: error -5 while erasing EB 100 [ 7619.377953] mtd_test: error -5 while erasing EB 100 [ 7619.457998] mtd_test: error -5 while erasing EB 100 [ 7619.537990] mtd_test: error -5 while erasing EB 100 ... Fixes: 6cf78358 ("mtd: mtd_torturetest: use mtd_test helpers") Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Jiri Slaby authored
commit fa0c5540 upstream. When resirefs is trying to mount a partition, it creates a commit workqueue (sbi->commit_wq). But when mount fails later, the workqueue is not freed. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Reported-by: auxsvr@gmail.com Reported-by:
Benoît Monin <benoit.monin@gmx.fr> Cc: Jan Kara <jack@suse.cz> Cc: reiserfs-devel@vger.kernel.org Fixes: 797d9016Signed-off-by:
-
Emmanuel Grumbach authored
commit 70dcec5a upstream. This can happen and there is no point in added more detection code lower in the stack. Catching these in one single point (cfg80211) is enough. Stop WARNING about this case. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=89001 Fixes: 2f1c6c57 ("cfg80211: process non country IE conflicting first") Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Luciano Coelho authored
commit f89f46cf upstream. If the userspace passes a malformed sched scan request (or a net detect wowlan configuration) by adding a NL80211_ATTR_SCHED_SCAN_MATCH attribute without any nested matchsets, a NULL pointer dereference will occur. Fix this by checking that we do have matchsets in our array before trying to access it. BUG: unable to handle kernel NULL pointer dereference at 0000000000000024 IP: [<ffffffffa002fd69>] nl80211_parse_sched_scan.part.67+0x6e9/0x900 [cfg80211] PGD 865c067 PUD 865b067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: iwlmvm(O) iwlwifi(O) mac80211(O) cfg80211(O) compat(O) [last unloaded: compat] CPU: 2 PID: 2442 Comm: iw Tainted: G O 3.17.2 #31 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff880013800790 ti: ffff880008d80000 task.ti: ffff880008d80000 RIP: 0010:[<ffffffffa002fd69>] [<ffffffffa002fd69>] nl80211_parse_sched_scan.part.67+0x6e9/0x900 [cfg80211] RSP: 0018:ffff880008d838d0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000143c RSI: 0000000000000000 RDI: ffff880008ee8dd0 RBP: ffff880008d83948 R08: 0000000000000002 R09: 0000000000000019 R10: ffff88001d1b3c40 R11: 0000000000000002 R12: ffff880019e85e00 R13: 00000000fffffed4 R14: ffff880009757800 R15: 0000000000001388 FS: 00007fa3b6d13700(0000) GS:ffff88003e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000024 CR3: 0000000008670000 CR4: 00000000000006e0 Stack: ffff880009757800 ffff880000000001 0000000000000000 ffff880008ee84e0 0000000000000000 ffff880009757800 00000000fffffed4 ffff880008d83948 ffffffff814689c9 ffff880009757800 ffff880008ee8000 0000000000000000 Call Trace: [<ffffffff814689c9>] ? nla_parse+0xb9/0x120 [<ffffffffa00306de>] nl80211_set_wowlan+0x75e/0x960 [cfg80211] [<ffffffff810bf3d5>] ? mark_held_locks+0x75/0xa0 [<ffffffff8161a77b>] genl_family_rcv_msg+0x18b/0x360 [<ffffffff810bf66d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8161a9d4>] genl_rcv_msg+0x84/0xc0 [<ffffffff8161a950>] ? genl_family_rcv_msg+0x360/0x360 [<ffffffff81618e79>] netlink_rcv_skb+0xa9/0xd0 [<ffffffff81619458>] genl_rcv+0x28/0x40 [<ffffffff816184a5>] netlink_unicast+0x105/0x180 [<ffffffff8161886f>] netlink_sendmsg+0x34f/0x7a0 [<ffffffff8105a097>] ? kvm_clock_read+0x27/0x40 [<ffffffff815c644d>] sock_sendmsg+0x8d/0xc0 [<ffffffff811a75c9>] ? might_fault+0xb9/0xc0 [<ffffffff811a756e>] ? might_fault+0x5e/0xc0 [<ffffffff815d5d26>] ? verify_iovec+0x56/0xe0 [<ffffffff815c73e0>] ___sys_sendmsg+0x3d0/0x3e0 [<ffffffff810a7be8>] ? sched_clock_cpu+0x98/0xd0 [<ffffffff810611b4>] ? __do_page_fault+0x254/0x580 [<ffffffff810bb39f>] ? up_read+0x1f/0x40 [<ffffffff810611b4>] ? __do_page_fault+0x254/0x580 [<ffffffff812146ed>] ? __fget_light+0x13d/0x160 [<ffffffff815c7b02>] __sys_sendmsg+0x42/0x80 [<ffffffff815c7b52>] SyS_sendmsg+0x12/0x20 [<ffffffff81751f69>] system_call_fastpath+0x16/0x1b Fixes: ea73cbce ("nl80211: fix scheduled scan RSSI matchset attribute confusion") Signed-off-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Arik Nemtsov authored
commit 34f05f54 upstream. In the already-set and intersect case of a driver-hint, the previous wiphy regdomain was not freed before being reset with a copy of the cfg80211 regdomain. Signed-off-by:
Arik Nemtsov <arikx.nemtsov@intel.com> Acked-by:
Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by:
-
