- 14 Oct, 2014 6 commits
-
-
Vince Bridgers authored
Signed-off-by:
Vince Bridgers <vbridger@opensource.altera.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Daniel Borkmann says: ==================== Here are some SCTP fixes. [ Note, immediate workaround would be to disable ASCONF (it is sysctl disabled by default). It is actually only used together with chunk authentication. ] ==================== Signed-off-by: -
Daniel Borkmann authored
This scenario is not limited to ASCONF, just taken as one example triggering the issue. When receiving ASCONF probes in the form of ... -------------- INIT[ASCONF; ASCONF_ACK] -------------> <----------- INIT-ACK[ASCONF; ASCONF_ACK] ------------ -------------------- COOKIE-ECHO --------------------> <-------------------- COOKIE-ACK --------------------- ---- ASCONF_a; [ASCONF_b; ...; ASCONF_n;] JUNK ------> [...] ---- ASCONF_m; [ASCONF_o; ...; ASCONF_z;] JUNK ------> ... where ASCONF_a, ASCONF_b, ..., ASCONF_z are good-formed ASCONFs and have increasing serial numbers, we process such ASCONF chunk(s) marked with !end_of_packet and !singleton, since we have not yet reached the SCTP packet end. SCTP does only do verification on a chunk by chunk basis, as an SCTP packet is nothing more than just a container of a stream of chunks which it eats up one by one. We could run into the case that we receive a packet with a malformed tail, above marked as trailing JUNK. All previous chunks are here goodformed, so the stack will eat up all previous chunks up to this point. In case JUNK does not fit into a chunk header and there are no more other chunks in the input queue, or in case JUNK contains a garbage chunk header, but the encoded chunk length would exceed the skb tail, or we came here from an entirely different scenario and the chunk has pdiscard=1 mark (without having had a flush point), it will happen, that we will excessively queue up the association's output queue (a correct final chunk may then turn it into a response flood when flushing the queue ;)): I ran a simple script with incremental ASCONF serial numbers and could see the server side consuming excessive amount of RAM [before/after: up to 2GB and more]. The issue at heart is that the chunk train basically ends with !end_of_packet and !singleton markers and since commit 2e3216cd ("sctp: Follow security requirement of responding with 1 packet") therefore preventing an output queue flush point in sctp_do_sm() -> sctp_cmd_interpreter() on the input chunk (chunk = event_arg) even though local_cork is set, but its precedence has changed since then. In the normal case, the last chunk with end_of_packet=1 would trigger the queue flush to accommodate possible outgoing bundling. In the input queue, sctp_inq_pop() seems to do the right thing in terms of discarding invalid chunks. So, above JUNK will not enter the state machine and instead be released and exit the sctp_assoc_bh_rcv() chunk processing loop. It's simply the flush point being missing at loop exit. Adding a try-flush approach on the output queue might not work as the underlying infrastructure might be long gone at this point due to the side-effect interpreter run. One possibility, albeit a bit of a kludge, would be to defer invalid chunk freeing into the state machine in order to possibly trigger packet discards and thus indirectly a queue flush on error. It would surely be better to discard chunks as in the current, perhaps better controlled environment, but going back and forth, it's simply architecturally not possible. I tried various trailing JUNK attack cases and it seems to look good now. Joint work with Vlad Yasevich. Fixes: 2e3216cd ("sctp: Follow security requirement of responding with 1 packet") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
When receiving a e.g. semi-good formed connection scan in the form of ... -------------- INIT[ASCONF; ASCONF_ACK] -------------> <----------- INIT-ACK[ASCONF; ASCONF_ACK] ------------ -------------------- COOKIE-ECHO --------------------> <-------------------- COOKIE-ACK --------------------- ---------------- ASCONF_a; ASCONF_b -----------------> ... where ASCONF_a equals ASCONF_b chunk (at least both serials need to be equal), we panic an SCTP server! The problem is that good-formed ASCONF chunks that we reply with ASCONF_ACK chunks are cached per serial. Thus, when we receive a same ASCONF chunk twice (e.g. through a lost ASCONF_ACK), we do not need to process them again on the server side (that was the idea, also proposed in the RFC). Instead, we know it was cached and we just resend the cached chunk instead. So far, so good. Where things get nasty is in SCTP's side effect interpreter, that is, sctp_cmd_interpreter(): While incoming ASCONF_a (chunk = event_arg) is being marked !end_of_packet and !singleton, and we have an association context, we do not flush the outqueue the first time after processing the ASCONF_ACK singleton chunk via SCTP_CMD_REPLY. Instead, we keep it queued up, although we set local_cork to 1. Commit 2e3216cd changed the precedence, so that as long as we get bundled, incoming chunks we try possible bundling on outgoing queue as well. Before this commit, we would just flush the output queue. Now, while ASCONF_a's ASCONF_ACK sits in the corked outq, we continue to process the same ASCONF_b chunk from the packet. As we have cached the previous ASCONF_ACK, we find it, grab it and do another SCTP_CMD_REPLY command on it. So, effectively, we rip the chunk->list pointers and requeue the same ASCONF_ACK chunk another time. Since we process ASCONF_b, it's correctly marked with end_of_packet and we enforce an uncork, and thus flush, thus crashing the kernel. Fix it by testing if the ASCONF_ACK is currently pending and if that is the case, do not requeue it. When flushing the output queue we may relink the chunk for preparing an outgoing packet, but eventually unlink it when it's copied into the skb right before transmission. Joint work with Vlad Yasevich. Fixes: 2e3216cd ("sctp: Follow security requirement of responding with 1 packet") Signed-off-by:
-
Daniel Borkmann authored
Commit 6f4c618d ("SCTP : Add paramters validity check for ASCONF chunk") added basic verification of ASCONF chunks, however, it is still possible to remotely crash a server by sending a special crafted ASCONF chunk, even up to pre 2.6.12 kernels: skb_over_panic: text:ffffffffa01ea1c3 len:31056 put:30768 head:ffff88011bd81800 data:ffff88011bd81800 tail:0x7950 end:0x440 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:129! [...] Call Trace: <IRQ> [<ffffffff8144fb1c>] skb_put+0x5c/0x70 [<ffffffffa01ea1c3>] sctp_addto_chunk+0x63/0xd0 [sctp] [<ffffffffa01eadaf>] sctp_process_asconf+0x1af/0x540 [sctp] [<ffffffff8152d025>] ? _read_unlock_bh+0x15/0x20 [<ffffffffa01e0038>] sctp_sf_do_asconf+0x168/0x240 [sctp] [<ffffffffa01e3751>] sctp_do_sm+0x71/0x1210 [sctp] [<ffffffff8147645d>] ? fib_rules_lookup+0xad/0xf0 [<ffffffffa01e6b22>] ? sctp_cmp_addr_exact+0x32/0x40 [sctp] [<ffffffffa01e8393>] sctp_assoc_bh_rcv+0xd3/0x180 [sctp] [<ffffffffa01ee986>] sctp_inq_push+0x56/0x80 [sctp] [<ffffffffa01fcc42>] sctp_rcv+0x982/0xa10 [sctp] [<ffffffffa01d5123>] ? ipt_local_in_hook+0x23/0x28 [iptable_filter] [<ffffffff8148bdc9>] ? nf_iterate+0x69/0xb0 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8148bf86>] ? nf_hook_slow+0x76/0x120 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff81496ded>] ip_local_deliver_finish+0xdd/0x2d0 [<ffffffff81497078>] ip_local_deliver+0x98/0xa0 [<ffffffff8149653d>] ip_rcv_finish+0x12d/0x440 [<ffffffff81496ac5>] ip_rcv+0x275/0x350 [<ffffffff8145c88b>] __netif_receive_skb+0x4ab/0x750 [<ffffffff81460588>] netif_receive_skb+0x58/0x60 This can be triggered e.g., through a simple scripted nmap connection scan injecting the chunk after the handshake, for example, ... -------------- INIT[ASCONF; ASCONF_ACK] -------------> <----------- INIT-ACK[ASCONF; ASCONF_ACK] ------------ -------------------- COOKIE-ECHO --------------------> <-------------------- COOKIE-ACK --------------------- ------------------ ASCONF; UNKNOWN ------------------> ... where ASCONF chunk of length 280 contains 2 parameters ... 1) Add IP address parameter (param length: 16) 2) Add/del IP address parameter (param length: 255) ... followed by an UNKNOWN chunk of e.g. 4 bytes. Here, the Address Parameter in the ASCONF chunk is even missing, too. This is just an example and similarly-crafted ASCONF chunks could be used just as well. The ASCONF chunk passes through sctp_verify_asconf() as all parameters passed sanity checks, and after walking, we ended up successfully at the chunk end boundary, and thus may invoke sctp_process_asconf(). Parameter walking is done with WORD_ROUND() to take padding into account. In sctp_process_asconf()'s TLV processing, we may fail in sctp_process_asconf_param() e.g., due to removal of the IP address that is also the source address of the packet containing the ASCONF chunk, and thus we need to add all TLVs after the failure to our ASCONF response to remote via helper function sctp_add_asconf_response(), which basically invokes a sctp_addto_chunk() adding the error parameters to the given skb. When walking to the next parameter this time, we proceed with ... length = ntohs(asconf_param->param_hdr.length); asconf_param = (void *)asconf_param + length; ... instead of the WORD_ROUND()'ed length, thus resulting here in an off-by-one that leads to reading the follow-up garbage parameter length of 12336, and thus throwing an skb_over_panic for the reply when trying to sctp_addto_chunk() next time, which implicitly calls the skb_put() with that length. Fix it by using sctp_walk_params() [ which is also used in INIT parameter processing ] macro in the verification *and* in ASCONF processing: it will make sure we don't spill over, that we walk parameters WORD_ROUND()'ed. Moreover, we're being more defensive and guard against unknown parameter types and missized addresses. Joint work with Vlad Yasevich. Fixes: b896b82b ("[SCTP] ADDIP: Support for processing incoming ASCONF_ACK chunks.") Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Bruno Thomsen authored
Bug: Unable to send and receive Ethernet packets with Micrel PHY. Affected devices: KSZ8031RNL (commercial temp) KSZ8031RNLI (industrial temp) Description: PHY device is correctly detected during probe. PHY power-up default is 25MHz crystal clock input and output 50MHz RMII clock to MAC. Reconfiguration of PHY to input 50MHz RMII clock from MAC causes PHY to become unresponsive if clock source is changed after Operation Mode Strap Override (OMSO) register setup. Cause: Long lead times on parts where clock setup match circuit design forces the usage of similar parts with wrong default setup. Solution: Swapped KSZ8031 register setup and added phy_write return code validation. Tested with Freescale i.MX28 Fast Ethernet Controler (fec). Signed-off-by:
Bruno Thomsen <bth@kamstrup.dk> Signed-off-by:
-
- 10 Oct, 2014 31 commits
-
-
David S. Miller authored
Florian Fainelli says: ==================== net: bcmgenet & systemport fixes This patch series fixes an off-by-one error introduced during a previous change, and the two other fixes fix a wake depth imbalance situation for the Wake-on-LAN interrupt line. ==================== Signed-off-by: -
Florian Fainelli authored
Multiple enable_irq_wake() calls will keep increasing the IRQ wake_depth, which ultimately leads to the following types of situation: 1) enable Wake-on-LAN interrupt w/o password 2) enable Wake-on-LAN interrupt w/ password 3) enable Wake-on-LAN interrupt w/o password 4) disable Wake-on-LAN interrupt After step 4), SYSTEMPORT would always wake-up the system no matter what wake-up device we use, which is not what we want. Fix this by making sure there are no unbalanced enable_irq_wake() calls. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Multiple enable_irq_wake() calls will keep increasing the IRQ wake_depth, which ultimately leads to the following types of situation: 1) enable Wake-on-LAN interrupt w/o password 2) enable Wake-on-LAN interrupt w/ password 3) enable Wake-on-LAN interrupt w/o password 4) disable Wake-on-LAN interrupt After step 4), GENET would always wake-up the system no matter what wake-up device we use, which is not what we want. Fix this by making sure there are no unbalanced enable_irq_wake() calls. Signed-off-by:
-
Florian Fainelli authored
Commit b629be5c ("net: bcmgenet: check harder for out of memory conditions") moved the increment of the local read pointer *before* reading from the hardware descriptor using dmadesc_get_length_status(), which creates an off-by-one situation. Fix this by moving again the read_ptr increment after we have read the hardware descriptor to get both the control block and the read pointer back in sync. Fixes: b629be5c ("net: bcmgenet: check harder for out of memory conditions") Signed-off-by:
Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by:
Petri Gynther <pgynther@google.com> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== net: fix races accessing page->_count This is illegal to use atomic_set(&page->_count, ...) even if we 'own' the page. Other entities in the kernel need to use get_page_unless_zero() to get a reference to the page before testing page properties, so we could loose a refcount increment. The only case it is valid is when page->_count is 0, we can use this in __netdev_alloc_frag() Note that I never seen crashes caused by these races, the issue was reported by Andres Lagar-Cavilla and Hugh Dickins. ==================== Signed-off-by: -
Eric Dumazet authored
This is illegal to use atomic_set(&page->_count, ...) even if we 'own' the page. Other entities in the kernel need to use get_page_unless_zero() to get a reference to the page before testing page properties, so we could loose a refcount increment. The only case it is valid is when page->_count is 0 Fixes: 540eb7bf ("net: Update alloc frag to reduce get/put page usage and recycle pages") Signed-off-by:
Eric Dumaze <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
This is illegal to use atomic_set(&page->_count, ...) even if we 'own' the page. Other entities in the kernel need to use get_page_unless_zero() to get a reference to the page before testing page properties, so we could loose a refcount increment. Signed-off-by:
-
Eric Dumazet authored
This is illegal to use atomic_set(&page->_count, 2) even if we 'own' the page. Other entities in the kernel need to use get_page_unless_zero() to get a reference to the page before testing page properties, so we could loose a refcount increment. Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Eric Dumazet authored
This is illegal to use atomic_set(&page->_count, 2) even if we 'own' the page. Other entities in the kernel need to use get_page_unless_zero() to get a reference to the page before testing page properties, so we could loose a refcount increment. Signed-off-by:
-
Eric Dumazet authored
This is illegal to use atomic_set(&page->_count, 2) even if we 'own' the page. Other entities in the kernel need to use get_page_unless_zero() to get a reference to the page before testing page properties, so we could loose a refcount increment. Signed-off-by:
-
Sascha Hauer authored
The KSZ8021 and KSZ8031 support RMII reference input clocks of 25MHz and 50MHz. Both PHYs differ in the default frequency they expect after reset. If this differs from the actual input clock, then register 0x1f bit 7 must be changed. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by:
-
Alexander Duyck authored
This patch addresses a kernel unaligned access bug seen on a sparc64 system with an igb adapter. Specifically the __skb_flow_get_ports was returning a be32 pointer which was then having the value directly returned. In order to prevent this it is actually easier to simply not populate the ports or address values when an skb is not present. In this case the assumption is that the data isn't needed and rather than slow down the faster aligned accesses by making them have to assume the unaligned path on architectures that don't support efficent unaligned access it makes more sense to simply switch off the bits that were copying the source and destination address/port for the case where we only care about the protocol types and lengths which are normally 16 bit fields anyway. Reported-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
-
Li RongQing authored
1. sk_run_filter has been renamed, sk_filter() is using SK_RUN_FILTER. 2. Remove wrong comments about storing intermediate value. 3. replace sk_run_filter with __bpf_prog_run for check_load_and_stores's comments Cc: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Li RongQing authored
__sk_run_filter has been renamed as __bpf_prog_run, so replace them in comments Signed-off-by:
-
David S. Miller authored
Jason Baron says: ==================== macvlan: optimize receive path So after porting this optimization to net-next, I found that the netperf results of TCP_RR regress right at the maximum peak of transactions/sec. That is as I increase the number of threads via the first argument to super_netperf, the number of transactions/sec keep increasing, peak, and then start decreasing. It is right at the peak, that I see a small regression with this patch (see results in patch 2/2). Without the patch, the ksoftirqd threads are the top cpu consumers threads on the system, since the extra 'netif_rx()', is queuing more softirq work, whereas with the patch, the ksoftirqd threads are below all of the 'netserver' threads in terms of their cpu usage. So there appears to be some interaction between how softirqs are serviced at the peak here and this patch. I think the test results are still supportive of this approach, but I wanted to be clear on my findings. ==================== Signed-off-by: -
jbaron@akamai.com authored
The netif_rx() call on the fast path of macvlan_handle_frame() appears to be there to ensure that we properly throttle incoming packets. However, it would appear as though the proper throttling is already in place for all possible ingress paths, and that the call is redundant. If packets are arriving from the physical NIC, we've already throttled them by this point. Otherwise, if they are coming via macvlan_queue_xmit(), it calls either 'dev_forward_skb()', which ends up calling netif_rx_internal(), or else in the broadcast case, we are throttling via macvlan_broadcast_enqueue(). The test results below are from off the box to an lxc instance running macvlan. Once the tranactions/sec stop increasing, the cpu idle time has gone to 0. Results are from a quad core Intel E3-1270 V2@3.50GHz box with bnx2x 10G card. for i in {10,100,200,300,400,500}; do super_netperf $i -H $ip -t TCP_RR; done Average of 5 runs. trans/sec trans/sec (3.17-rc7-net-next) (3.17-rc7-net-next + this patch) ---------- ---------- 208101 211534 (+1.6%) 839493 850162 (+1.3%) 845071 844053 (-.12%) 816330 819623 (+.4%) 778700 789938 (+1.4%) 735984 754408 (+2.5%) Signed-off-by:Jason Baron <jbaron@akamai.com> Signed-off-by:
-
jbaron@akamai.com authored
Pass last argument to macvlan_count_rx() as the correct bool type. Signed-off-by:
-
David S. Miller authored
Iyappan Subramanian says: ==================== Add 10GbE support to APM X-Gene SoC ethernet driver Adding 10GbE support to APM X-Gene SoC ethernet driver. v4: Address comments from v3 * dtb: resolved merge conflict for the net tree v3: Address comments from v2 * dtb: changed to use all-zeros for the mac address v2: Address comments from v1 * created preparatory patch to review before adding new functionality * dtb: updated to use tabs consistently v1: * Initial version ==================== Signed-off-by: -
Iyappan Subramanian authored
Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
Keyur Chudgar <kchudgar@apm.com> Signed-off-by:
-
Iyappan Subramanian authored
- Added 10GbE support - Removed unused macros/variables - Moved mac_init call to the end of hardware init Signed-off-by:
-
Iyappan Subramanian authored
- Rearranged code to pave the way for adding 10GbE support - Added mac_ops structure containing function pointers for mac specific functions - Added port_ops structure containing function pointers for port specific functions Signed-off-by:
-
Iyappan Subramanian authored
Added 10GbE interface and clock nodes. Signed-off-by:
-
Iyappan Subramanian authored
Signed-off-by:
-
Iyappan Subramanian authored
Updated APM X-Gene ethernet driver maintainers list. Signed-off-by:
-
Alexei Starovoitov authored
minimal configurations where EPOLL, PERF_EVENTS, etc are disabled, but NET is enabled, are failing to build with link error: kernel/built-in.o: In function `bpf_prog_load': syscall.c:(.text+0x3b728): undefined reference to `anon_inode_getfd' fix it by selecting ANON_INODES when NET is enabled Reported-by:
Michal Sojka <sojkam1@fel.cvut.cz> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net-next This batch contains two fixes for what you have in your net-next, they are: 1) Remove nf_send_reset6() from header file. This function now resides in the nf_reject_ipv6 module. Reported by Eric Dumazet. 2) Fix wrong NFT_REJECT_ICMPX_MAX definition and adjust code to fix errors reported by Dan Carpenter's static analysis tools. ==================== Signed-off-by: -
David S. Miller authored
Merge tag 'master-2014-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-10-09 Please pull this batch of fixes intended for the 3.18 stream! Andrea Merello makes rtl818x_pci use a more reasonable transmission rate for HW generated frames. Fabian Frederick tweaks some kernel-doc bits to avoid warnings. Larry Finger corrects a possible unaligned access in the rtlwifi code. Marek Puzyniak avoids a kernel panic in ath9k_hw_reset. Sujith Manoharan goes for the hat trick -- he fixes a smatch warning in the shared ath code, he fixes a crash in ath9k, and he corrects a sequence number assignment problem in ath9k too. For ease of merging, I pulled the last bits of the wireless tree as well... Please let me know if there are problems! ==================== Signed-off-by:
-
Vince Bridgers authored
Testing revealed that the local variable mc_filter was dimensioned incorrectly for all possible configurations and get_mac_addr should have been set_mac_addr (a typo). Make sure mc_filter is dimensioned to 8 32-bit unsigned longs - the largest size of the Synopsys multicast filter register set. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Geert Uytterhoeven authored
If NO_DMA=y: drivers/built-in.o: In function `rxq_deinit': pxa168_eth.c:(.text+0x2a2f2e): undefined reference to `dma_free_coherent' drivers/built-in.o: In function `txq_reclaim': pxa168_eth.c:(.text+0x2a3044): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `txq_deinit': pxa168_eth.c:(.text+0x2a310a): undefined reference to `dma_free_coherent' drivers/built-in.o: In function `txq_init': pxa168_eth.c:(.text+0x2a3226): undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `rxq_init': pxa168_eth.c:(.text+0x2a32d4): undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `init_hash_table': pxa168_eth.c:(.text+0x2a3354): undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `rxq_refill': pxa168_eth.c:(.text+0x2a345a): undefined reference to `dma_map_single' drivers/built-in.o: In function `rxq_process': pxa168_eth.c:(.text+0x2a39cc): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `pxa168_eth_remove': pxa168_eth.c:(.text+0x2a3b84): undefined reference to `dma_free_coherent' drivers/built-in.o: In function `pxa168_eth_start_xmit': pxa168_eth.c:(.text+0x2a3e8a): undefined reference to `dma_map_single' Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Pranith Kumar authored
The latest linus git tip (3.18-rc1) fails with the following build failure. Fix this by making PTP support explicit for fm10k driver. rivers/built-in.o: In function `fm10k_ptp_register': (.text+0x12e760): undefined reference to `ptp_clock_registER' drivers/built-in.o: In function `fm10k_ptp_unregister': (.text+0x12e7dc): undefined reference to `ptp_clock_unregister' Makefile:930: recipe for target 'vmlinux' failed Signed-off-by:
Pranith Kumar <bobby.prani@gmail.com> Signed-off-by:
-
LEROY Christophe authored
[linux-devel:devel-hourly-2014100909 3763/3915] drivers/net/ethernet/freescale/fs_enet/mac-scc.c:119:32: error: 'SCCE_ENET_TXF' undeclared Due to patch d43a396a net: fs_enet: Add NAPI TX, it appears that some target compilations are broken. This is due to the fact that unlike the FEC, the SCC and FCC don't have a TXF event (complete Frame transmitted) but only TXB (buffer transmitted). Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
- 09 Oct, 2014 3 commits
-
-
Jesper Dangaard Brouer authored
Restore the quota fairness between qdisc's, that we broke with commit 5772e9a3 ("qdisc: bulk dequeue support for qdiscs with TCQ_F_ONETXQUEUE"). Before that commit, the quota in __qdisc_run() were in packets as dequeue_skb() would only dequeue a single packet, that assumption broke with bulk dequeue. We choose not to account for the number of packets inside the TSO/GSO packets (accessable via "skb_gso_segs"). As the previous fairness also had this "defect". Thus, GSO/TSO packets counts as a single packet. Further more, we choose to slack on accuracy, by allowing a bulk dequeue try_bulk_dequeue_skb() to exceed the "packets" limit, only limited by the BQL bytelimit. This is done because BQL prefers to get its full budget for appropriate feedback from TX completion. In future, we might consider reworking this further and, if it allows, switch to a time-based model, as suggested by Eric. Right now, we only restore old semantics. Joint work with Eric, Hannes, Daniel and Jesper. Hannes wrote the first patch in cooperation with Daniel and Jesper. Eric rewrote the patch. Fixes: 5772e9a3 ("qdisc: bulk dequeue support for qdiscs with TCQ_F_ONETXQUEUE") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
David S. Miller authored
Hayes Wang says: ==================== r8152: use mutex for hw settings v2: Make sure the autoresume wouldn't occur inside the mutex, otherwise the dead lock would happen. For the purpose, adjust some code about autosuspend/autoresume. v1: Use mutex to avoid that the serial hw settings would be interrupted by other settings. Although there is no problem now, it makes the driver more safe. ==================== Signed-off-by: -
hayeswang authored
Use the mutex to avoid the settings are interrupted by other ones. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
