- 18 Jan, 2016 3 commits
-
-
Tvrtko Ursulin authored
LRC code was calling GEM API like i915_gem_obj_ggtt_offset from places where the struct_mutex cannot be grabbed (irq handlers). To avoid that this patch caches some interesting bits and values in the engine and context structures. Some usages are also removed where they are not needed like a few asserts which are either impossible or have been checked already during engine initialization. Side benefit is also that interrupt handlers and command submission stop evaluating invariant conditionals, like what Gen we are running on, on every interrupt and every command submitted. This patch deals with logical ring context id and descriptors while subsequent patches will deal with the remaining issues. v2: * Cache the VMA instead of the address. (Chris Wilson) * Incorporate Dave Gordon's good comments and function name. v3: * Extract ctx descriptor template to a function and group functions dealing with ctx descriptor & co together near top of the file. (Dave Gordon) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Gordon <david.s.gordon@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452870629-13830-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
Tvrtko Ursulin authored
No need to call ktime_get_raw_ns twice per unlimited wait and can also elimate a local variable. v2: Added comment about silencing the compiler warning. (Daniel Vetter) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Dave Gordon <david.s.gordon@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452870672-13901-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
Daniel Vetter authored
Pull in Dave's drm-next pull request to have a clean base for 4.6. Also, we need the various atomic state extensions Maarten recently created. Conflicts are just adjacent changes that all resolve to nothing in git diff. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
-
- 17 Jan, 2016 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel into drm-next misc i915 fixes all over the place. * tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel: drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page drm/i915: Widen return value for reservation_object_wait_timeout_rcu to long. drm/i915: intel_hpd_init(): Fix suspend/resume reprobing drm/i915: shut up gen8+ SDE irq dmesg noise, again drm/i915: Restore inhibiting the load of the default context drm/i915: Tune down rpm wakelock debug checks drm/i915: Avoid writing relocs with addresses in non-canonical form drm/i915: Move Braswell stop_machine GGTT insertion workaround
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Since your main drm-next pull isn't out of the door yet I figured I might as well flush out drm-misc instead of delaying for 4.6. It's really just random stuff all over, biggest thing probably connector_mask tracking from Maarten. * tag 'topic/drm-misc-2016-01-17' of git://anongit.freedesktop.org/drm-intel: (24 commits) drm/fb_cma_helper: Remove implicit call to disable_unused_functions drm/sysfs: use kobj_to_dev() drm/i915: Init power domains early in driver load drm: Do not set connector->encoder in drivers apple-gmux: Add initial documentation drm: move MODULE_PARM_DESC to other file drm/edid: index CEA/HDMI mode tables using the VIC drm/atomic: Remove drm_atomic_connectors_for_crtc. drm/i915: Update connector_mask during readout, v2. drm: Remove opencoded drm_gem_object_release_handle() drm: Do not set outparam on error during GEM handle allocation drm/docs: more leftovers from the big vtable documentation pile drm/atomic-helper: Reject legacy flips on a disabled pipe drm/atomic: add connector mask to drm_crtc_state. drm/tegra: Use __drm_atomic_helper_reset_connector for subclassing connector state, v2. drm/atomic: Add __drm_atomic_helper_connector_reset, v2. drm/i915: Set connector_state->connector using the helper. drm: Use a normal idr allocation for the obj->name drm: Only bump object-reference count when adding first handle drm: Balance error path for GEM handle allocation ...
-
- 15 Jan, 2016 9 commits
-
-
Ville Syrjälä authored
rotate_pages() doesn't modify the passed in dma addresses, so make them const. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452777736-4909-4-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Just for clarity set the type for i915_ggtt_view_normal explicitly. While at it fix the indentation fail for i915_ggtt_view_rotated. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452777736-4909-3-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Don't increment obj->framebuffer_references until we know we actually managed to create the framebuffer. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452777736-4909-2-git-send-email-ville.syrjala@linux.intel.com
-
Maxime Ripard authored
The drm_fbdev_cma_init function always calls the drm_helper_disable_unused_functions. Since it's part of the usual probe process, all the drivers using that helper will end up having their encoder and CRTC disable functions called at probe if their device has not been reported as enabled. This could be fixed by reading out from the registers the current state of the device if it is enabled, but even that will not handle the case where the device is actually disabled. Moreover, the drivers using the atomic modesetting expect that their enable and disable callback to be called when the device is already enabled or disabled (respectively). We can however fix this issue by moving the call to drm_helper_disable_unused_functions out of drm_fbdev_cma_init and make the drivers needing it (all the drivers calling drm_fbdev_cma_init and not using the atomic modesetting) explicitly call it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452785109-6172-14-git-send-email-maxime.ripard@free-electrons.comAcked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jani Nikula authored
Per DP spec, the source device should fall back to 18 bpp, VESA range RGB when the sink capability is unknown. Fix the color depth clamping. 18 bpp color depth should ensure full color range in automatic mode. The clamping has been HDMI specific since its introduction in commit 996a2239 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Apr 19 11:24:34 2013 +0200 drm/i915: Disable high-bpc on pre-1.4 EDID screens Cc: stable@vger.kernel.org Reported-and-tested-by: Dihan Wickremasuriya <nayomal@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452695720-7076-1-git-send-email-jani.nikula@intel.com
-
Jani Nikula authored
Two errors in a single line. The size was read from the wrong offset, and the end index didn't take the five bytes for sequence byte and size of sequence into account. Fix it all, and break up the calculations a bit to make it clearer. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-and-tested-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: 2a33d934 ("drm/i915/bios: add support for MIPI sequence block v3") Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452784327-27258-1-git-send-email-jani.nikula@intel.com
-
Francisco Jerez authored
We need to set the DC FLUSH PIPE_CONTROL bit on Gen7+ to guarantee that writes performed via the HDC are visible in memory. Fixes an intermittent failure in a Piglit test that writes to a BO from a shader using GL atomic counters (implemented as HDC untyped atomics) and then expects the memory to read back the same value after mapping it on the CPU. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91298Tested-by: Mark Janes <mark.a.janes@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Francisco Jerez <currojerez@riseup.net> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452740379-3194-1-git-send-email-currojerez@riseup.netSigned-off-by: Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
ilk_program_watermarks() is supposed to merge the active watermarks from all pipes. Thus we need to use the active config too instead of some precomputed stuff. Fixes: aa363136 ("drm/i915: Calculate watermark configuration during atomic check (v2)") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452776015-22076-2-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
ilk_compute_pipe_wm() assumes as zeroed pipe_wm structure when it starts. We used to pass such a zeroed struct in, but this got broken when the pipe_wm structure got embedded in the crtc state. To fix it without too much fuzz, we need to resort to a memset(). Fixes: 4e0963c7 ("drm/i915: Calculate pipe watermarks into CRTC state (v3)") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452776015-22076-1-git-send-email-ville.syrjala@linux.intel.com
-
- 14 Jan, 2016 1 commit
-
-
Jani Nikula authored
Add a common function to return "on" or "off" string based on the argument, and drop the local versions of it. This is the onoff version of commit 42a8ca4c Author: Jani Nikula <jani.nikula@intel.com> Date: Thu Aug 27 16:23:30 2015 +0300 drm/i915: add yesno utility function Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452768814-29787-1-git-send-email-jani.nikula@intel.com
-
- 13 Jan, 2016 25 commits
-
-
Dave Airlie authored
this fixes the build on arm. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next This 2nd pull request includes the following, - add configurable plane support and relevant cleanups. - fixup kernel panic issue at drm releasing. - remove unnecessary codes. This has been delayed to resolve a critical issue - which incurrs a kernel panic when driver is released - and review it. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: fix kernel panic issue at drm releasing drm/exynos: crtc: do not wait for the scanout completion drm/exynos: mixer: properly update all planes on the same vblank event drm/exynos: crtc: rework atomic_{begin,flush} drm/exynos: mixer: unify a check for video-processor window drm/exynos: mixer: also allow ARGB1555 and ARGB4444 drm/exynos: mixer: refactor layer setup drm/exynos: mixer: remove all static blending setup drm/exynos: mixer: set window priority based on zpos drm/exynos: make zpos property configurable drm/exynos: rename zpos to index
-
git://git.pengutronix.de/git/lst/linuxDave Airlie authored
etnaviv fixes. * 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux: drm/etnaviv: fix workaround for GC500 drm/etnaviv: unlock on error in etnaviv_gem_get_iova()
-
Dave Airlie authored
Merge branch 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip into drm-next new rockchip bits. * 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip: drm: rockchip: Support Synopsys DW MIPI DSI Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver drm/rockchip: return a true clock rate to adjusted_mode
-
Thomas Hellstrom authored
When the framebuffer is a vmwgfx dma buffer and a proxy surface is created, the vmw_kms_update_proxy() function requires that the proxy surface width and the framebuffer pitch are compatible, otherwise display corruption occurs as seen in gnome-shell/native with software 3D. Since the framebuffer pitch is determined by user-space, allocate a proxy surface the width of which is based on the framebuffer pitch rather than on the framebuffer width. Cc: <stable@vger.kernel.org> Reported-by: Raphael Hertzog <buxy@kali.org> Tested-by: Mati Aharoni <muts@kali.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
With CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y the vmwgfx kernel module would unconditionally throw a bug when checking for a held spinlock in the command buffer code. Fix this by using a lockdep check. Cc: <stable@vger.kernel.org> Reported-and-tested-by: Tetsuo Handa <penguin-kernel@i-love-sakura.ne.jp> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Arnd Bergmann authored
The new debugfs initialization code fails to build when CONFIG_DEBUG_FS is disabled: In file included from /git/arm-soc/drivers/gpu/drm/nouveau/nouveau_drm.c:57:0: drivers/gpu/drm/nouveau/nouveau_debugfs.h: In function 'nouveau_debugfs_init': drivers/gpu/drm/nouveau/nouveau_debugfs.h:37:29: error: parameter name omitted nouveau_debugfs_init(struct nouveau_drm *) This fixes the prototypes so we can build it again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b126a200 ("drm/nouveau/debugfs: we need a ctrl object for debugfs") Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Karol Herbst authored
v2: remove unneeded pci check Signed-off-by: Karol Herbst <nouveau@karolherbst.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
A few more misc things for radeon and amdgpu for 4.5: - TTM fixes for imported buffers - amdgpu fixes to avoid -ENOMEM in CS ioctl - CZ UVD and VCE clock force options for debugging video issues - A couple of ACP prerequisites - Misc fixes * 'drm-next-4.5' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: validate duplicates first drm/amdgpu: move VM page tables to the LRU end on CS v2 drm/ttm: add ttm_bo_move_to_lru_tail function v2 drm/ttm: fix adding foreign BOs to the swap LRU drm/ttm: fix adding foreign BOs to the LRU during init v2 drm/radeon: use kobj_to_dev() drm/amdgpu: use kobj_to_dev() drm/amdgpu/cz: force vce clocks when sclks are forced drm/amdgpu/cz: force uvd clocks when sclks are forced drm/amdgpu/cz: add code to enable forcing VCE clocks drm/amdgpu/cz: add code to enable forcing UVD clocks drm/amdgpu: fix lost sync_to if scheduler is enabled. drm/amd/powerplay: fix static checker warning for return meaningless value. drm/amdgpu: add irq domain support drm/amdgpu/cgs: add an interface to access PCI resources
-
Christian König authored
Most VM BOs end up in the duplicates list, validate it first make -ENOMEM less likely. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <David1.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
This makes it less likely to run into an ENOMEM because VM page tables are evicted last. v2: move the BOs in the LRU tail after validation Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
This allows the drivers to move a BO to the end of the LRU without removing and adding it again. v2: Make it more robust, handle pinned and swapable BOs as well. Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
It doesn't make any sense to try to swap out imported BOs. Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
If we import a BO with an external reservation object we don't reserve/unreserve it. So we never add it to the LRU causing a possible denial of service. v2: fix typo in commit message Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Geliang Tang authored
Use kobj_to_dev() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Geliang Tang authored
Use kobj_to_dev() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
VCE DPM works similarly to SCLK DPM. Add a similar interface for VCE for forcing the VCE clocks. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
UVD DPM works similarly to SCLK DPM. Add a similar interface for UVD for forcing the UVD clocks. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Ville Syrjälä authored
Pull the code to determine the surface alignment for both linear and tiled surfaces into a separate function intel_surf_alignment(). This will be used not only for the vma alignment but actually aligning the plane SURF once SKL+ starts using intel_compute_page_offset() (since SKL+ needs >4K alignment for tiled surfaces too). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452625717-9713-8-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Since intel_gen4_compute_page_offset() can now handle tiling formats all the way down to gen2, rename it to intel_compute_tile_offset(). Not that we actually use it on gen2/3 since there's no DSPSURF etc. registers which would take a page aligned address. v2: s/page/tile/ (Daniel) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452625717-9713-7-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Make intel_gen4_compute_page_offset() ready for other tiling formats besied X-tile by getting the tile dimensions through intel_tile_{size,width,height}(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452625717-9713-6-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Use the actual tile size as to compute stuff in intel_fill_fb_ggtt_view() instead of assuming it's PAGE_SIZE. I suppose it doesn't matter since we don't use the results on gen2 platforms where the tile size is 2k. v2: Update due to CbCr plane Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452625717-9713-5-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
I find more usual to think about tile widths than heights, so changing the intel_tile_height() to calculate the tile height as tile_size/tile_width is easier than the opposite to the poor brain. v2: Reorder arguments for consistency Constify dev_priv arguments Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452625717-9713-4-git-send-email-ville.syrjala@linux.intel.com
-