- 22 Dec, 2015 40 commits
-
-
Marc Gonzalez authored
This device tree was tested on a Sigma Designs SMP8758 Vantage-1172 Rev E1 development board. Signed-off-by:
Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Reviewed-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'sunxi-dt-for-4.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Allwinner DT patches, round 2 Mostly some audio codec patches to enable it on more boards, and a bunch devices activation (Ethernet, touchscreen, backlights). One more board has been added too. * tag 'sunxi-dt-for-4.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sun5i: Add dts file for the Empire Electronix D709 tablet ARM: dts: sun7i: Enable gmac on Wits Pro A20 DKT ARM: dt: sun7i: Enable audio codec on MK808C ARM: sunxi: dt: enable audio codec on mk802 ARM: dts: sun7i: Add PA gpio pin to Wexler TAB7200 tablet ARM: dts: sun7i: Add backlight node to Wexler TAB7200 tablet ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet ARM: dts: sun7i: Enable PWM controller on Wexler TAB7200 tablet ARM: dts: sun4i: gemei-g9: Enable PA GPIO pin configuration ARM: dts: sun4i: Enable onboard codec used on the pov protab2-ips9 tablet ARM: dts: sun5i: Enable onboard codec used on the UTOO P66 tablet Signed-off-by:
-
Olof Johansson authored
Merge tag 'at91-4.5-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt Second batch of DT changes for 4.5: - addition of sound nodes for sama5d2 and the xplained - addition of a new patform by Landis+Gyr: VInCo * tag 'at91-4.5-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91/dt: sama5d2 Xplained: add pdmic node ARM: at91/dt: sama5d2: add pdmic node ARM: at91/dt: Add Support for the L+G VInCo platform Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linuxOlof Johansson authored
The i.MX device tree updates for 4.5: - New boards support: imx51-ts4800, imx6q-novena, CompuLab imx7d SoM/SBC, vf610m4-cosmic - Add ADC device support for imx6ul and imx7d - Remove config space from PCIe controller ranges property for i.MX6 - Add Vivante GPU nodes for i.MX6 - Add DCU, LCD, and SATA devices for LS1021A - A series to update Ventana gw5xxx boards getting HDMI and LVDS to work simultaneously and devices like PWM and SPI added - Quite a few random cleanups and minor updates * tag 'imx-dt-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits) ARM: dts: imx7d: sbc-imx7: add basic board support ARM: dts: imx7d: cl-som-imx7: add basic module support ARM: dts: TS-4800: add touchscreen support ARM: dts: ts-4800: Add LCD support ARM: dts: imx6q: add Novena board devicetree: bindings: Add vendor prefix for Kosagi ARM: dts: TS-4800: use weim IP to map the FPGA ARM: dts: TS-4800: drop uart rts/cts pin reservations ARM: dts: imx6: add Vivante GPU nodes ARM: dts: imx28: add alternate auart4 pinmux ARM: dts: ls1021a: add sata node to dts ARM: dts: TS-4800: add basic device tree of: documentation: add bindings documentation for TS-4800 of: add vendor prefix for Technologic Systems ARM: dts: imx7d-sdb: add ADC support ARM: dts: imx7d.dtsi: add ADC support ARM: dts: vf-colibri: add CAN support ARM: mxs: dt: cfa10057: fix backlight PWM ARM: dts: imx6qdl: move GIC to right location in DT ARM: dts: imx6qdl: add IPU aliases ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'omap-for-v4.5/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Second set of omap device tree changes for v4.5 merge window. This series updates the EDMA bindings based on the various fixes to split EDMA into separate independent devices. It also adds support for more devices on the CompuLab cm-t335 and LogicPD Torpedo boards, and enables the new bindings for qspi for am437x and dra7. There are also few dra7 regulator fixes, and change of gpoi-key,wakeup to wakeup-source. These depend on commit ae0add74 ("dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type") already merged into mainline. * tag 'omap-for-v4.5/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: LogicPD Torpedo: Add Touchscreen Support ARM: dts: DRA7-EVM: Add regulator-allow-bypass property for ldo9 ARM: dts: DRA72-EVM: Add regulator-allow-bypass property for ldo1 and ldo2 ARM: dts: AM4372: add entry for qspi mmap region ARM: dts: DRA7: add entry for qspi mmap region ARM: OMAP2+: LogicPD Torpedo: Revert Duplicative Entries ARM: OMAP2+: LogicPD Torpedo + Wireless: Add Bluetooth ARM: OMAP2+: LogicPD Torpedo: Add LCD Type 15 Support ARM: dts: cm-t335: add support for bluetooth ARM: dts: cm-t335: add support for DVI/LCD ARM: dts: cm-t335: add support for I2C GPIO expander ARM: dts: cm-t335: add support for SBC-T335 ARM: dts: cm-t335: add support for USB0 ARM: dts: omap: replace legacy *,wakeup property with wakeup-source ARM: dts: am335x: replace gpio-key,wakeup with wakeup-source property ARM: DTS: am437x: Use the new DT bindings for the eDMA3 ARM: DTS: am33xx: Use the new DT bindings for the eDMA3 dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type Signed-off-by:
-
Olof Johansson authored
Merge tag 'socfpga_dts_for_v4.5_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA DTS update for v4.5, part 2 - clean up mcvevk dts file, replace space with tab - Disable SDMMC node in base socfpga.dtsi file * tag 'socfpga_dts_for_v4.5_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: Enable MMC support at correct place in the DT ARM: socfpga: Repair incorrectly applied MCV patch Signed-off-by:
-
Olof Johansson authored
Merge tag 'v4.5-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Another new soc - the rk3228 quad-core cortex-a7, a new rk3036 board, support for the efuses on Rockchip socs and some improvements for rk3288 regulators. * tag 'v4.5-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add the kylin board for rk3036 ARM: dts: rockchip: add the sdio/sdmmc node for rk3036 ARM: dts: rockchip: fix the pinctrl bias settings for rk3036 ARM: dts: rockchip: add eFuse node for rk3188 SoCs ARM: dts: rockchip: add eFuse node for rk3066a SoCs ARM: dts: rockchip: add eFuse config of rk3288 SoC ARM: dts: rockchip: add rk3228-evb board ARM: dts: rockchip: add core rk3228 dtsi clk: rockchip: Add the clock ids of rk3288 eFuses ARM: dts: rockchip: Fix typo in rk3288 sdmmc card detect pin name ARM: dts: rockchip: fix voltage ranges for rk3288-evb-act8846 board ARM: dts: rockchip: move the public part to rk3288-evb common ARM: dts: rockchip: add 2 regulators for rk3288-evb-act8846 ARM: dts: rockchip: correct the name of REG8 for rk3288-evb-act8846 clk: rockchip: add dt-binding header for rk3228 clk: rockchip: add id for mipidsi sclk on rk3288 Signed-off-by:
-
https://github.com/manabian/linux-lpcOlof Johansson authored
Device Tree additions for LPC18xx platform NXP LPC18xx EEPROM support plus board updates for CIAA board and EA4357 Dev kit. * tag 'lpc18xx_dts_for_4.5' of https://github.com/manabian/linux-lpc: ARM: dts: lpc4337-ciaa: add i2c0 and devices ARM: dts: lpc4337-ciaa: enable SCT-PWM ARM: dts: lpc4357-ea4357: add mma7455 i2c accelerometer ARM: dts: lpc4357: enable EEPROM memory ARM: dts: lpc18xx: add EEPROM memory node Signed-off-by:
-
https://github.com/mbgg/linux-mediatekOlof Johansson authored
Add regulators to the scpsys binding. Move the include of the reset contoller to include/dt-bindings/reset. Add basic support for mt2701 SoC and evaluation board. * tag 'v4.4-next-dts' of https://github.com/mbgg/linux-mediatek: dt-bindings: soc: Add supplies for Mediatek SCPSYS unit ARM: mediatek: DT: Move reset controller constants into common location ARM: dts: mediatek: add MT2701 basic support Document: DT: Add bindings for mediatek MT2701 SoC Platform Signed-off-by:
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
mvebu dt for 4.5 (part 3) Add dts for the following boards: - Zyxel NSA325 - PogoPlug series 4 Add GPU support for Dove Update boolean property to wakeup source for isil * tag 'mvebu-dt-4.5-3' of git://git.infradead.org/linux-mvebu: ARM: dts: armada: replace isil, irq2-can-wakeup-machine with wakeup-source property ARM: dts: enable GPU for SolidRun's Cubox ARM: dts: dove: add DT GPU support ARM: mvebu: kirkwood: add PogoPlug series 4 device tree ARM: mvebu: add kirkwood compatibles for cloudengine boards ARM: dts: kirkwood: Add DTS for Zyxel NSA325 Signed-off-by:
-
Olof Johansson authored
Merge tag 'renesas-dt3-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Third Round of Renesas ARM Based SoC DT Updates for v4.5 * Use SoC-specific usb-dmac and IPMMU compatibility strings * Add internal delay for i2c IPs * Add missing serial devices to r8a7793 * Enable DMA for r8a7793 serial devices * Add serial port config to chosen/stdout-path * Tidyup #sound-dai-cells settings for r8a7798/bockw * Remove deprecated #gpio-range-cells from r8a7793 * Add EtherAVB support to r8a7791 * Add MSIOF support to sh73a0 * tag 'renesas-dt3-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (25 commits) ARM: shmobile: r8a779x: use SoC-specific usb-dmac compatibility strings ARM: shmobile: r8a7794: IPMMU compat string SoC part number update ARM: shmobile: r8a7793: IPMMU compat string SoC part number update ARM: shmobile: r8a7791: IPMMU compat string SoC part number update ARM: shmobile: r8a7790: IPMMU compat string SoC part number update ARM: shmobile: r8a7794: dtsi: add internal delay for i2c IPs ARM: shmobile: r8a7791: dtsi: add internal delay for i2c IPs ARM: shmobile: r8a7790: dtsi: add internal delay for i2c IPs ARM: shmobile: r8a7793: Describe DMA for the serial ports ARM: shmobile: r8a7793: Add missing serial devices to DT ARM: shmobile: lager dts: Add serial port config to chosen/stdout-path ARM: shmobile: porter dts: Add serial port config to chosen/stdout-path ARM: shmobile: silk dts: Add serial port config to chosen/stdout-path ARM: shmobile: gose dts: Add serial port config to chosen/stdout-path ARM: shmobile: bockw dts: Update console parameters ARM: shmobile: ape6evm dts: Add serial port config to chosen/stdout-path ARM: shmobile: alt dts: Add serial port config to chosen/stdout-path ARM: shmobile: koelsch dts: Add serial port config to chosen/stdout-path ARM: shmobile: r8a7778: tidyup #sound-dai-cells settings ARM: shmobile: bockw dts: Override #sound-dai-cells to zero ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'qcom-dt-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Qualcomm ARM Based Device Tree Updates for v4.5 * Add support for Sony Xperia Z * Updates for Sony Honami board * Updates for APQ8064 generic platform * Updates for MSM8974 generic platform * Add fixed rate oscillators for MSM8960 and APQ8064 * Add documentation for SMSM and SMP2P * Fixup PMIC compat strings * Add support for SMEM, RPM/SMD on APQ8084 * Fixup compat on IFC5640 * tag 'qcom-dt-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (24 commits) arm: dts: Add support for PMA8084 on APQ8084 arm: dts: Add RPM/SMD support on APQ8084 arm: dts: Add APQ8084 SMEM nodes ARM: dts: qcom: apq8064-ifc6410 Use hardware flow control for GSBI6 arm: dts: qcom: apq8064: Add fixed rate on-board oscillators ARM: dts: qcom: msm8974: Add i2c8 node ARM: dts: qcom: msm8974: Disable wled and move it to honami arm: dts: qcom: Add generic PMIC gpio/MPP compat strings arm: dts: qcom: Add aliases for PMICs arm: dts: qcom: Update ifc6540 compat for qcom boot format arm: dts: qcom: Add board clocks ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node ARM: dts: qcom: apq8064: Declare all pm8921 regulators ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes dt-binding: soc: qcom: Introduce qcom, smp2p binding documentation dt-binding: soc: qcom: Add Qualcomm SMSM device tree documentation devicetree: Add hardware rng entry to qcom-apq8064.dtsi ARM: dts: qcom: msm8974-honami: Specify charging parameters ARM: dts: qcom: msm8974-honami: Add uSD slot nodes ... Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91Olof Johansson authored
First batch of DT changes for 4.5: - addition of nodes for sama5d2 & sama5d4 - some fixes for i2c hold time, compatible stings - addition of a new patform by DENX: the MA5D4 SoM and EVK * tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: sama5d2 Xplained: pmic needs a specific sda hold time ARM: at91/dt: sama5d4: update i2c compatible string ARM: at91/dt: sama5d4 master clock can run at 200MHz now ARM: at91/dt: sama5d2: add watchdog node ARM: at91/dt: sama5d4: Add support for DENX MA5D4 SoM and EVK ARM: at91/dt: sama5d4: Add pinmux for 8-bit MMC0 bus ARM: at91/dt: sama5d4: Fix mmc0 pinmux comments Signed-off-by:
-
Olof Johansson authored
Merge tag 'sunxi-dt-for-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Allwinner DT changes for 4.5 Allwinner device-tree related patches for the 4.5 merge window. * Support for the H3 * Addition of the RSB to the relevant devices (sun8i, sun9i) * Addition of the Video Engine clocks for the older SoCs (sun4i, sun7i) * Addition of the DRAM gates for the older SoCs (sun4i, sun7i) * Addition of the audio codec to a bunch of boards * New board: ICNova SWAC * tag 'sunxi-dt-for-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (40 commits) ARM: dts: sun7i: Olimex A20-SOM-EVB: Enable mmc3 (baseboard SD socket) ARM: dts: sun7i: Olimex A20-SOM-EVB: Add LRADC keys ARM: dts: sun9i: cubieboard4: Enable Reduced Serial Bus controller ARM: dts: sun9i: cubieboard4: Enable consumer IR receiver ARM: dts: sun9i: cubieboard4: Enable LEDs ARM: dts: sun7i: Add VE (Video Engine) module clock node ARM: dts: sun4i: Add VE (Video Engine) module clock node ARM: dts: sun8i: Add Orange Pi Plus support ARM: dts: sunxi: Add Allwinner H3 DTSI ARM: dts: sun7i: Add DRAM gates ARM: dts: sun4i: Add DRAM gates ARM: dts: sun9i: Add NMI controller device node ARM: dts: sun9i: optimus: Enable Reduced Serial Bus controller ARM: dts: sun9i: Add Reduced Serial Bus controller device node to A80 dtsi ARM: dts: sun9i: optimus: Enable consumer IR receiver ARM: dts: sun9i: Add consumer IR receiver device node and pinmux settings ARM: dts: sun9i: optimus: Enable LED3 ARM: dts: sun9i: Add A80 R_PIO pin controller device node ARM: dts: sun9i: Add TODO comments for the main and low power clocks ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes ... Signed-off-by:
-
https://github.com/Xilinx/linux-xlnxOlof Johansson authored
arm: Xilinx Zynq dt patches for v4.5 - Various small DT changes, GPIO, slcr, cpu label * tag 'zynq-dt-for-4.5' of https://github.com/Xilinx/linux-xlnx: ARM: dt: zynq: Add labels to cpu nodes to allow overriding OPPs. ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-bus ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property ARM: zynq: DT: Add interrupt-controller property to GPIO Signed-off-by:
-
Ilya Ledvich authored
SBC-iMX7 is a single board computer designed for industrial and embedded applications. It is based on the Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with the CL-SOM-iMX7 System-on-Module providing most of the functions, and SB-SOM-iMX7 carrier board providing additional peripheral functions and connectors. http://www.compulab.co.il/products/sbcs/sbc-imx7-freescale-i-mx-7-single-board-computer/ http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/ Add basic board support, including SD card as a secondary boot and storage device Signed-off-by:
Ilya Ledvich <ilya@compulab.co.il> Signed-off-by:
Igor Grinberg <grinberg@compulab.co.il>
-
Ilya Ledvich authored
CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on Freescale i.MX7 System-on-Chip family. http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/ Add basic DT support for standalone module (without a carrier board): * Memory configuration * eMMC * 2x Gigabit Ethernet ports (FEC1 and FEC2) * I2C2 bus * EEPROM * PCA9555 GPIO extender * PMIC * UART1 * USB OTG port Signed-off-by:
-
Damien Riegel authored
This commit enables the touchscreen on TS-4800, using the ts4800-ts driver. Signed-off-by:
Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Damien Riegel authored
This commit adds LCD support for the TS-4800. The panel is an Okaya RS800480T-7X0WQ and the timings have been extracted from Technologic Systems' tree. Signed-off-by:
-
Sean Cross authored
Novena is an open-hardware laptop/desktop/bare board. See http://www.kosagi.com/w/index.php?title=Novena_Main_PageSigned-off-by:
Sean Cross <xobs@kosagi.com> Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Sean Cross authored
Add a vendor prefix for Sutajio Ko-Usagi PTE Ltd., which goes by the more common name of Kosagi. Signed-off-by:
-
Damien Riegel authored
Previously, the device tree mapped the FPGA like any other IPs inside the SoC, but it is actually mapped through the WEIM (Wireless External Interface Module). This patch updates the device tree to make use of it. About the timings: in the image provided by the manufacturer, only CS0GCR1 is changed. The other values are the default ones, but the WEIM bindings expect them to be all explicitly set in the device tree, so I just put the default values in the dt. Signed-off-by:
-
Damien Riegel authored
These pins are actually not routed for UARTs, they should not be reserved. Signed-off-by:
-
Lucas Stach authored
This adds the device nodes for 2D, 3D and VG GPU cores. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Mans Rullgard authored
Add auart4 2-pin configuration on auart0 rts/cts pads. Signed-off-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
-
Tang Yuantian authored
Added sata node to ls1021aqds and ls1021atwr board to support sata function. Signed-off-by:
Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by:
-
Damien Riegel authored
This device tree adds support for TS-4800 by Technologic Systems. This board is based on MX51-babbage, but there are some subtle differences in the pins used, and there is an additional FPGA that is memory-mapped. More details here: http://wiki.embeddedarm.com/wiki/TS-4800Signed-off-by:
-
Damien Riegel authored
This adds the documentation for the TS-4800 by Technologic Systems. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Damien Riegel authored
Signed-off-by:
Lee Jones <lee.jones@linaro.org> Acked-by:
-
Haibo Chen authored
Add ADC support for imx7d-sdb board. Signed-off-by:
Haibo Chen <haibo.chen@freescale.com> Signed-off-by:
-
Haibo Chen authored
Add imx7d ADC support. Signed-off-by:
-
Stefan Agner authored
Add Colibri standard pinmux for FlexCAN controller instances. CAN is not a standard Colibri feature, but the datasheet predefines pins which provide CAN (compatible across some modules). Hence, add the pinmux on module level. Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Alexandre Belloni authored
The backlight PWM is actually pwm4. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Lucas Stach authored
No functional change, just moving the node to the place where it belongs according to its unit address. Signed-off-by:
-
Philipp Zabel authored
This allows for consistent numbering of the IPU output and input ports. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Lucas Stach authored
This has been moved to the reg property where it belongs for quite some time. The range has been unused by the kernel since then and with kernel 4.4 it's flagged as an unparsable range, as it does not comply to the PCI ranges DT binding. Fix this by removing the superfluous range. Signed-off-by:
-
Shengjiu Wang authored
Audio IP need the spba clock, but original clock name "dma" is not accurate, so change it to name "spba". The audio driver has been using the new name "spba", the binding document has been updated. Signed-off-by:
Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by:
-
Meng Yi authored
Signed-off-by:
Alison Wang <b18965@freescale.com> Signed-off-by:
Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by:
Jianwei Wang <jianwei.wang.chn@gmail.com> Signed-off-by:
Meng Yi <b56799@freescale.com> Signed-off-by:
-
Meng Yi authored
Signed-off-by:
-
Bai Ping authored
As on i.MX7D, we using a virtual arm clk for CPU frequency scaling, so correct the clocks info used by the cpufreq driver. Signed-off-by:
Bai Ping <b51503@freescale.com> Acked-by:
-
