- 01 Mar, 2017 8 commits
-
-
Hans de Goede authored
Move the DPOunit clock gate workaround to directly after the PLL enable. The exact location of the workaround does not matter and there are 2 reasons to group it with the PLL enable: 1) This moves it out of the middle of the init sequence from the spec, making it easier to follow the init sequence / compare it to the spec 2) It is grouped with the pll disable call in intel_dsi_post_disable, so for consistency it should be grouped with the pll enable in intel_dsi_pre_enable Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-5-git-send-email-jani.nikula@intel.com
-
Hans de Goede authored
Now that we are no longer bound to the drm_panel_ callbacks, call MIPI_SEQ_POWER_ON/OFF at the proper place. Signed-off-by:
-
Hans de Goede authored
intel_dsi_post_disable(), which does the MIPI_SEQ_ASSERT_RESET, will always be called at some point before intel_dsi_pre_enable() making the MIPI_SEQ_ASSERT_RESET in intel_dsi_pre_enable() redundant. In addition, calling MIPI_SEQ_ASSERT_RESET in the enable path goes against the VBT spec. Signed-off-by:
-
Hans de Goede authored
Document the DSI panel enable / disable sequences from the spec, for easy comparison between the code and the spec. Signed-off-by:
-
Jani Nikula authored
Leave the runtime check in place in case the platform variable itself comes from bogus sources. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Imre Deak authored
After commit 2c7d0602 Author: Imre Deak <imre.deak@intel.com> Date: Mon Dec 5 18:27:37 2016 +0200 drm/i915/gen9: Fix PCODE polling during CDCLK change notification there is still one report of the CDCLK-change request timing out on a KBL machine, see the Reference link. On that machine the maximum time the request took to succeed was 34ms, so increase the timeout to 50ms. v2: - Change timeout from 100 to 50 ms to maintain the current 50 ms limit for atomic waits in the driver. (Chris, Tvrtko) Reference: https://bugs.freedesktop.org/show_bug.cgi?id=99345 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Imre Deak <imre.deak@intel.com> Acked-by:
-
Deepak M authored
v2: Addressed Jani's Review comments(renamed bit field macros) v3: Jani's Review comment for aligning code to platforms and added wrapper functions. v4: Corrected enable/disable seuqence as per BSPEC v5: Corrected waiting twice for same bit (Review comments: Jani) v6: Rebased to Han's patches(dsi restructuring code) Signed-off-by:
Deepak M <m.deepak@intel.com> Signed-off-by:
Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/intel_dsi.c: In function ‘intel_dsi_prepare’: drivers/gpu/drm/i915/intel_dsi.c:1308:1: error: the frame size of 2488 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] which is caused by the compiling expanding every _MIPI_PORT into an on-stack array of u32[3] at every callsite. Not sure why only one machine/compiler appears susceptible, but with a minor tweak to _MIPI_PORT we can defer the error until later. This is a partial revert of commit ce64645d ("drm/i915: use variadic macros and arrays to choose port/pipe based registers") for a particular bad offender. Signed-off-by:
-
- 28 Feb, 2017 15 commits
-
-
Chris Wilson authored
A couple of operations, the flushes and the tracepoint, do not require serialisation by client->wq_lock, so move them before we take it. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Chris Wilson authored
Following the use of dma_fence_signal() from within our interrupt handler, we need to make guc->wq_lock also irq-safe. This was done previously as part of the guc scheduler patch (which also started mixing our fences with the interrupt handler), but is now required to fix the current guc submission backend. v4: Document that __i915_guc_submit is always under an irq disabled section v5: Move wq_rsvd adjustment to its own function Fixes: 67b807a8 ("drm/i915: Delay disabling the user interrupt for breadcrumbs") Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170228112803.11646-2-chris@chris-wilson.co.ukReviewed-by:
-
Hans de Goede authored
On some devices only MIPI PORT C is used, in this case checking the MIPI PORT A CTRL AFE_LATCHOUT bit (there is no such bit for PORT C on VLV/CHT) will result in false positive "DSI LP not going Low" errors as this checks the PORT A clk status. In case both ports are used we have already checked the AFE_LATCHOUT bit when going through the for_each_dsi_port() loop for PORT A and checking the same bit again for PORT C is a no-op. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97061Signed-off-by:
-
Hans de Goede authored
The drm_panel_enable/disable and drm_panel_prepare/unprepare calls are not fine grained enough to abstract all the different steps we need to take (and VBT sequences we need to exec) properly. So simply remove the panel _enable/disable and prepare/unprepare callbacks and instead export intel_dsi_exec_vbt_sequence() from intel_dsi_panel_vbt.c and call that from intel_dsi_enable/disable(). No functional changes. Signed-off-by:
-
Hans de Goede authored
Move the intel_dsi_clear_device_ready() function to higher up in intel_dsi.c this pairs it with intel_dsi_device_ready(); and pairs intel_dsi_*enable* with intel_dsi_*disable without intel_dsi_clear_device_ready() sitting in the middle of them. This commit purely moves code around, it does not make any changes what-so-ever. Signed-off-by:
-
Hans de Goede authored
The enable path has an intel_dsi_prepare() helper which prepares various registers for the mode-set. Move the code undoing this to a new intel_dsi_unprepare() helper function for better symmetry between the enable and disable paths. No functional changes. Signed-off-by:
-
Hans de Goede authored
intel_dsi_disable/enable only have one caller, merge them into their respective callers. Change msleep(2) into usleep_range(2000, 5000) to make checkpatch happy, otherwise no functional changes. The main advantage of this change is that it makes it easier to follow all the steps of the panel enable / disable sequence when reading the code. Signed-off-by:
-
Hans de Goede authored
Instead of calling wait_for_dsi_fifo_empty on all dsi ports after calling a drm_panel_foo helper which calls VBT sequences, move it to the VBT mipi_exec_send_packet helper, which is the one VBT instruction which actually puts data in the fifo. This results in a nice cleanup making it clearer what all the steps on intel_dsi_enable / disable are and this also makes the VBT code properly wait till a command has actually been send before executing the next steps (typically a delay) in the VBT sequence. Signed-off-by:
-
Chris Wilson authored
Move the setting of gpu_error->missed_irq_ring bit to a common function so that we can get the debug logging for either path. v2: Add %pF caller Signed-off-by:
-
Madhav Chauhan authored
As per BSPEC, GLK supports MIPI DSI 8X clk only on PORT A. Therefore only for PORT A PLL divider value should be validated. Signed-off-by:
-
Deepak M authored
v2: Addressed Jani's Review comments(renamed bit field macros) Txesc clock divider is calculated and programmed for geminilake platform. Signed-off-by:
-
Deepak M authored
Register MIPI_CLOCK_CTRL is applicable only for BXT platform. Future platform have other registers to program the escape clock dividers. Signed-off-by:
-
Deepak M authored
PLL divider range for GLK is different than that of BXT, hence adding the GLK range check in this patch. v2: Code restructure using min and max ratio variables (Ander) v3: Code changes to avoid "maybe-uninitialized" warning (Jani) Signed-off-by:
-
Deepak M authored
Program the clk lane and tlpx time count registers to configure DSI PHY. v2: Addressed Jani's Review comments(renamed bit field macros) v3: Program clk lane timing reg same as dphy param reg. v4: Removed "line over 80 character" warning Signed-off-by:
-
Deepak M authored
For GEMINILAKE, dphy param reg values are programmed in terms of HS byte clock count while for older platforms in terms of HS ddr clk count. v2: Added comments to clarify ddr clock count calculation v3: Use multiplier variable instead of IS_GEMINILAKE() check everywhere (Jani) Signed-off-by:
-
- 27 Feb, 2017 17 commits
-
-
Chris Wilson authored
A significant cost in setting up a wait is the overhead of enabling the interrupt. As we disable the interrupt whenever the queue of waiters is empty, if we are frequently waiting on alternating batches, we end up re-enabling the interrupt on a frequent basis. We do want to disable the interrupt during normal operations as under high load it may add several thousand interrupts/s - we have been known in the past to occupy whole cores with our interrupt handler after accidentally leaving user interrupts enabled. As a compromise, leave the interrupt enabled until the next IRQ, or the system is idle. This gives a small window for a waiter to keep the interrupt active and not be delayed by having to re-enable the interrupt. v2: Restore hangcheck/missed-irq detection for continuations v3: Be more careful restoring the hangcheck timer after reset v4: Be more careful restoring the fake irq after reset (if required!) v5: Redo changes to intel_engine_wakeup() v6: Factor out __intel_engine_wakeup() v7: Improve commentary for declaring a missed wakeup Signed-off-by:
-
Chris Wilson authored
By deferring hangcheck to the fake breadcrumb interrupt, we can simply the enabling procedure slightly - as by enabling the fake, we then enable the hangcheck. By always enabling the hangcheck from each fake interrupt (it will be a no-op for an already queued hangcheck), it will make restoring the breadcrumbs after a reset simpler in the next patch. Signed-off-by:
-
Chris Wilson authored
As execlists and other non-semaphore multi-engine devices coordinate between engines using interrupts, we can shave off a few 10s of microsecond of scheduling latency by doing the fence signaling from the interrupt as opposed to a RT kthread. (Realistically the delay adds about 1% to an individual cross-engine workload.) We only signal the first fence in order to limit the amount of work we move into the interrupt handler. We also have to remember that our breadcrumbs may be unordered with respect to the interrupt and so we still require the waiter process to perform some heavyweight coherency fixups, as well as traversing the tree of waiters. v2: No need for early exit in irq handler - it breaks the flow between patches and prevents the tracepoint v3: Restore rcu hold across irq signaling of request Signed-off-by:
-
Chris Wilson authored
The two users of the return value from intel_engine_wakeup() are expecting different results. In the breadcrumbs hangcheck, we are using it to determine whether wake_up_process() detected the waiter was currently running (and if so we presume that it hasn't yet missed the interrupt). However, in the fake_irq path, we are using the return value as a check as to whether there are any waiters, and so we may incorrectly stop the fake-irq if that waiter was currently running. To handle the two different needs, return both bits of information! We uninline it from the irq path in preparation for the next patch which makes the irq hotpath special and relegates intel_engine_wakeup() to the slow fixup paths. v2: s/ret/result/ Signed-off-by:
-
Chris Wilson authored
After initiating a sideband transaction, we only want to wait for the transaction to become idle. If, as we are, we wait for both the busy and error flag to clear, if an error is raised we just spin until the timeout. Once the hw is idle, we can then check to see if the hw flagged an error, and report it distinctly. Signed-off-by:
-
Chris Wilson authored
No hardware was ever shipped that needed more than 4096 byte alignment and future hardware will not use this legacy path. So reduce the alignment to make it easier and quicker to launch workloads. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170227135913.8056-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
We are required to reload the TLBs around ppgtt switches. However, we already do an unconditional TLB invalidate before every batch and a flush afterwards, so this condition is already satisfied without extra flushes around the LRI instructions. Signed-off-by:
-
Chris Wilson authored
We are required to reload the TLBs around context switches (MI_SET_CONTEXT specifically) and the recommendation is do that before the MI_SET_CONTEXT so that it is serialised with the switch and not forgotten: [DevSNB] If Flush TLB invalidation Mode is enabled it’s the driver’s responsibility to invalidate the TLBs at least once after the previous context switch after any GTT mappings changed (including new GTT entries). This can be done by a pipeline PIPE_CONTROL with TLB inv bit set immediately before MI_SET_CONTEXT. However, we already do an unconditional TLB invalidate before every batch so this condition is satifisfied. Signed-off-by:
-
Mika Kuoppala authored
Certain Baytrails, namely the 4 cpu core variants, have been plaqued by spurious system hangs, mostly occurring with light loads. Multiple bisects by various people point to a commit which changes the reclocking strategy for Baytrail to follow its bigger brethen: commit 8fb55197 ("drm/i915: Agressive downclocking on Baytrail") There is also a review comment attached to this commit from Deepak S on avoiding punit access on Cherryview and thus it was excluded on common reclocking path. By taking the same approach and omitting the punit access by not tweaking the thresholds when the hardware has been asked to move into different frequency, considerable gains in stability have been observed. With J1900 box, light render/video load would end up in system hang in usually less than 12 hours. With this patch applied, the cumulative uptime has now been 34 days without issues. To provoke system hang, light loads on both render and bsd engines in parallel have been used: glxgears >/dev/null 2>/dev/null & mpv --vo=vaapi --hwdec=vaapi --loop=inf vid.mp4 So far, author has not witnessed system hang with above load and this patch applied. Reports from the tenacious people at kernel bugzilla are also promising. Considering that the punit access frequency with this patch is considerably less, there is a possibility that this will push the, still unknown, root cause past the triggering point on most loads. But as we now can reliably reproduce the hang independently, we can reduce the pain that users are having and use a static thresholds until a root cause is found. v3: don't break debugfs and simplification (Chris Wilson) References: https://bugzilla.kernel.org/show_bug.cgi?id=109051 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Cc: fritsch@xbmc.org Cc: miku@iki.fi Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> CC: Michal Feix <michal@feix.cz> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Deepak S <deepak.s@linux.intel.com> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.2+ Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487166779-26945-1-git-send-email-mika.kuoppala@intel.com
-
Chris Wilson authored
As we track whether a vma has been inserted into the drm_mm using the vma->flags, if we fail to bind the vma into the GTT we do not update those bits and will attempt to reinsert the vma into the drm_mm on future passes. To prevent that, we want to unwind i915_vma_insert() if we fail in our attempt to bind. Fixes: 59bfa124 ("drm/i915: Start passing around i915_vma from execbuffer") Testcase: igt/drv_selftest/live_gtt Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170227122654.27651-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we fail to allocate the ppgtt range after allocating the pages for the vma, we should unwind the local allocation before reporting back the failure. Fixes: ff685975 ("drm/i915: Move allocate_va_range to GTT") Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170227122654.27651-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Only if we allocated the layer and the lower level failed should we remove this layer when unwinding. Otherwise we ignore the overlapping entries by overwriting the old layer with scratch. Fixes: c5d092a4 ("drm/i915: Remove bitmap tracking for used-pml4") Fixes: e2b763ca ("drm/i915: Remove bitmap tracking for used-pdpes") Reported-by:
Matthew Auld <matthew.william.auld@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99947 Testcase: igt/drv_selftest/live_gtt Signed-off-by:
-
Kelvin Gardiner authored
The replay bit of the ring mode register is not a valid bit for Gen8+. Do not write to this bit. Signed-off-by:
Kelvin Gardiner <kelvin.gardiner@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Ceraolo Spurio, Daniele <daniele.ceraolospurio@intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> [Joonas: Fixed commit message line to be under 72 chars] Signed-off-by:
-
Michał Winiarski authored
Used by production device: Intel(R) Iris(TM) Graphics P555 Cc: <stable@vger.kernel.org> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Daniel Vetter authored
Backmerge the main pull request to sync up with all the newly landed drivers. Otherwise we'll have chaos even before 4.12 started in earnest. Signed-off-by:Daniel Vetter <daniel.vetter@intel.com>
-
Ander Conselvan de Oliveira authored
According to bspec, the DDI IO power domains should be enabled after enabling the DPLL and mapping it to the DDI. The current order doesn't seem to create problems with Skylake and Kabylake, but causes enable timeouts in Geminilake. v2: Rebase. - Take power domain references before sanitizing encoders. (Imre) - Add comment to get_encoder_power_domains() defition. (Ander) v3: Don't put the domain if called with HSW/BDW's analog encoder. (CI) v4: Put IO power domain before unmapping DPLL. (Imre) - Change return type of intel_ddi_get_power_domains() to u64. (Imre) Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> # v1 Reviewed-by:
-
Ander Conselvan de Oliveira authored
In Geminilake, the DDI IO power domains can't be enabled before a DPLL is running and mapped to the appropriate DDI. At least on Geminilake, attempting to enable those during init will lead to a timeout. The failure to enable the power domain also causes issues with the state verifier during resume from suspend. After all the init power domains are enabled, the call to intel_power_domains_sync_hw() from the resume path will cause the hw_enabled field on the respective power wells to be false while the usage count remains above zero. Further attempts to enable the power domain caused by a modeset will simply update the usage count without doing anything else. When the state verifier attempts to read the state of a DDI encoder, intel_display_power_get_if_enabled() returns false, leading to the following WARN: WARNING: CPU: 3 PID: 1743 at drivers/gpu/drm/i915/intel_display.c:7001 verify_connector_state.isra.80+0x26c/0x2b0 [i915] attached crtc is active, but connector isn't Modules linked in: i915(E) tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_broute bridge stp llc ebtable_nat ip6table_mangle ip6table_security ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_raw iptable_mangle iptable_security iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables x86_pkg_temp_thermal coretemp kvm_intel kvm i2c_algo_bit drm_kms_helper irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drm shpchp tpm_tis tpm_tis_core tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc crc32c_intel serio_raw [last unloaded: i915] CPU: 3 PID: 1743 Comm: kworker/u8:22 Tainted: G W E 4.10.0-rc3ander+ #300 Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0023.B40.1611302145 11/30/2016 Workqueue: events_unbound async_run_entry_fn Call Trace: dump_stack+0x86/0xc3 __warn+0xcb/0xf0 warn_slowpath_fmt+0x5f/0x80 verify_connector_state.isra.80+0x26c/0x2b0 [i915] intel_atomic_commit_tail+0x520/0x1000 [i915] ? remove_wait_queue+0x70/0x70 intel_atomic_commit+0x3f8/0x520 [i915] ? intel_runtime_pm_put+0x6e/0xa0 [i915] drm_atomic_commit+0x4b/0x50 [drm] __intel_display_resume+0x72/0xc0 [i915] intel_display_resume+0x107/0x150 [i915] i915_drm_resume+0xe0/0x180 [i915] i915_pm_restore+0x1e/0x30 [i915] i915_pm_resume+0xe/0x10 [i915] pci_pm_resume+0x64/0xa0 dpm_run_callback+0xa1/0x2a0 ? pci_pm_thaw+0x90/0x90 device_resume+0xe3/0x200 async_resume+0x1d/0x50 async_run_entry_fn+0x39/0x170 process_one_work+0x212/0x670 ? process_one_work+0x197/0x670 worker_thread+0x4e/0x490 kthread+0x101/0x140 ? process_one_work+0x670/0x670 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x2a/0x40 Cc: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by:
David Weinehall <david.weinehall@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170222063431.10060-6-ander.conselvan.de.oliveira@intel.com
-
