Merge tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.16, round 2:

- One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
  properly
- Fix CSI_DATA07__ESAI_TX0 pad name in i.MX7ULL pin function header
- Remove interconnect property from i.MX8MQ LCDIF device to fix the
  regression that LCDIF driver stops probe, because interconnect
  provider driver (imx-bus) hasn't been fully working.
- Fix soc-imx driver to register SoC device only on i.MX platform.

* tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: Register SoC device only on i.MX boards
  soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset
  ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name
  arm64: dts: imx8mq: remove interconnect property from lcdif

Link: https://lore.kernel.org/r/20211211015625.GK4216@dragonSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.16-firmware-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes

firmware: Fixes for v5.16-rc5

This contains a single fix for an incorrect usage of sizeof().

* tag 'tegra-for-5.16-firmware-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  firmware: tegra: Fix error application of sizeof() to pointer

Link: https://lore.kernel.org/r/20211207162115.450554-1-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Asahi SoC DT/binding fixes for 5.16.

Just some minor DT fixups we found after things got merged.

* tag 'asahi-soc-fixes-5.16' of https://github.com/AsahiLinux/linux:
  arm64: dts: apple: add #interrupt-cells property to pinctrl nodes
  dt-bindings: i2c: apple,i2c: allow multiple compatibles
  arm64: dts: apple: change ethernet0 device type to ethernet

Link: https://lore.kernel.org/r/cc9a1a67-3b2d-ae9f-5733-859111eb78c1@marcan.stSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'socfpga_fix_for_v5.16_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes

SoCFPGA fix for v5.16, part 2
- Fix QSPI dts entry to include "jedec,spi-nor"

* tag 'socfpga_fix_for_v5.16_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: socfpga: dts: fix qspi node compatible

Link: https://lore.kernel.org/r/20211203181007.3138381-1-dinguyen@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge branch 'v5.16/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes

* 'v5.16/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  arm64: meson: remove COMMON_CLK
  arm64: meson: fix dts for JetHub D1

Link: https://lore.kernel.org/r/ab9f066f-480b-84b2-248e-953f2f2b5f59@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amdtee-fix-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes

AMD-TEE fix IS_ERR() bug

* tag 'amdtee-fix-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee:
  tee: amdtee: fix an IS_ERR() vs NULL bug

Link: https://lore.kernel.org/r/20211130070351.GA2308099@jadeSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.16:

- A series from Vladimir Oltean to update SJA1105 switch RGMII delay for
  a few boards, so that kernel doesn't warn on the legacy bindings.
- Remove redundant interrupt declaration for gpio-keys on board
  ls1088a-ten64, as this causes an IRQ reclaiming error on kernel v5.15
  and later.

* tag 'imx-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys
  arm64: dts: lx2160abluebox3: update RGMII delays for sja1105 switch
  ARM: dts: ls1021a-tsn: update RGMII delays for sja1105 switch
  ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch

Link: https://lore.kernel.org/r/20211126100716.GF4216@dragonSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Reset controller fixes for v5.16

Well, just one: revert commit c045ceb5 ("reset: tegra-bpmp: Handle
errors in BPMP response"), which exposed an issue with the Tegra194 HDA
controller reset. BPMP response error handling will be reinstated once
there's a fix for the HDA issue.

* tag 'reset-fixes-for-v5.16' of git://git.pengutronix.de/pza/linux:
  reset: tegra-bpmp: Revert Handle errors in BPMP response
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

At the moment, using the ARM32 multi_v7_defconfig always results in two
SoCs being exposed in sysfs. This is wrong, as far as I'm aware the
Qualcomm DragonBoard 410c does not actually make use of a i.MX SoC. :)

  qcom-db410c:/sys/devices/soc0$ grep . *
  family:Freescale i.MX
  machine:Qualcomm Technologies, Inc. APQ 8016 SBC
  revision:0.0
  serial_number:0000000000000000
  soc_id:Unknown

  qcom-db410c:/sys/devices/soc1$ grep . *
  family:Snapdragon
  machine:APQ8016
  ...

This happens because imx_soc_device_init() registers the soc device
unconditionally, even when running on devices that do not make use of i.MX.
Arnd already reported this more than a year ago and even suggested a fix
similar to this commit, but for some reason it was never submitted.

Fix it by checking if the "__mxc_cpu_type" variable was actually
initialized by earlier platform code. On devices without i.MX it will
simply stay 0.

Cc: Peng Fan <peng.fan@nxp.com>
Fixes: d2199b34 ("ARM: imx: use device_initcall for imx_soc_device_init")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/CAK8P3a0hxO1TmK6oOMQ70AHSWJnP_CAq57YMOutrxkSYNjFeuw@mail.gmail.com/Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Most of the blk-ctrl reset bits are found in one register, however
there are two bits in offset 8 for pulling the MIPI DPHY out of reset
and one of them needs to be set when IMX8MM_DISPBLK_PD_MIPI_CSI is brought
out of reset or the MIPI_CSI hangs.

Since MIPI_DSI is impacted, add the additional one for MIPI_DSI too.

Fixes: 926e57c0 ("soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may
have the ESAI_TX0 functionality, not ESAI_T0.

Also, NXP's i.MX Config Tools 10.0 generates dtsi with the
MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming, so fix it accordingly.

There are no devicetree users in mainline that use the old name,
so just remove the old entry.

Fixes: c201369d ("ARM: dts: imx6ull: add imx6ull support")
Reported-by: George Makarov <georgemakarov1@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The mxsfb driver handling imx8mq lcdif doesn't yet request the
interconnect bandwidth that's needed at runtime when the description is
present in the DT node.

So remove that description and bring it back when it's supported.

Fixes: ad1abc8a ("arm64: dts: imx8mq: Add interconnect for lcdif")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Pull parisc fixes from Helge Deller:
 "Some bug and warning fixes:

   - Fix "make install" to use debians "installkernel" script which is
     now in /usr/sbin

   - Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE
     file name

   - Fix compiler warnings by annotating parisc agp init functions with
     __init

   - Fix timekeeping on SMP machines with dual-core CPUs

   - Enable some more config options in the 64-bit defconfig"

* tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Mark cr16 CPU clocksource unstable on all SMP machines
  parisc: Fix "make install" on newer debian releases
  parisc/agp: Annotate parisc agp init functions with __init
  parisc: Enable sata sil, audit and usb support on 64-bit defconfig
  parisc: Fix KBUILD_IMAGE for self-extracting kernel

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for a few reported issues. Included in
  here are:

   - xhci fix for a _much_ reported regression. I don't think there's a
     community distro that has not reported this problem yet :(

   - new USB quirk addition

   - cdns3 minor fixes

   - typec regression fix.

  All of these have been in linux-next with no reported problems, and
  the xhci fix has been reported by many to resolve their reported
  problem"

* tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()
  usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
  usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
  USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
  xhci: Fix commad ring abort, write all 64 bits to CRCR register.

Pull tty/serial fixes from Greg KH:
 "Here are some small TTY and Serial driver fixes for 5.16-rc4 to
  resolve a number of reported problems.

  They include:

   - liteuart serial driver fixes

   - 8250_pci serial driver fixes for pericom devices

   - 8250 RTS line control fix while in RS-485 mode

   - tegra serial driver fix

   - msm_serial driver fix

   - pl011 serial driver new id

   - fsl_lpuart revert of broken change

   - 8250_bcm7271 serial driver fix

   - MAINTAINERS file update for rpmsg tty driver that came in 5.16-rc1

   - vgacon fix for reported problem

  All of these, except for the 8250_bcm7271 fix have been in linux-next
  with no reported problem. The 8250_bcm7271 fix was added to the tree
  on Friday so no chance to be linux-next yet. But it should be fine as
  the affected developers submitted it"

* tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_bcm7271: UART errors after resuming from S2
  serial: 8250_pci: rewrite pericom_do_set_divisor()
  serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array
  serial: 8250: Fix RTS modem control while in rs485 mode
  Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP"
  serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30
  serial: liteuart: relax compile-test dependencies
  serial: liteuart: fix minor-number leak on probe errors
  serial: liteuart: fix use-after-free and memleak on unbind
  serial: liteuart: Fix NULL pointer dereference in ->remove()
  vgacon: Propagate console boot parameters before calling `vc_resize'
  tty: serial: msm_serial: Deactivate RX DMA for polling support
  serial: pl011: Add ACPI SBSA UART match id
  serial: core: fix transmit-buffer reset and memleak
  MAINTAINERS: Add rpmsg tty driver maintainer

Pull timer fix from Borislav Petkov:

 - Prevent a tick storm when a dedicated timekeeper CPU in nohz_full
   mode runs for prolonged periods with interrupts disabled and ends up
   programming the next tick in the past, leading to that storm

* tag 'timers_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers/nohz: Last resort update jiffies on nohz_full IRQ entry

Pull scheduler fixes from Borislav Petkov:

 - Properly init uclamp_flags of a runqueue, on first enqueuing

 - Fix preempt= callback return values

 - Correct utime/stime resource usage reporting on nohz_full to return
   the proper times instead of shorter ones

* tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/uclamp: Fix rq->uclamp_max not set on first enqueue
  preempt/dynamic: Fix setup_preempt_mode() return value
  sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full

Pull x86 fixes from Borislav Petkov:

 - Fix a couple of SWAPGS fencing issues in the x86 entry code

 - Use the proper operand types in __{get,put}_user() to prevent
   truncation in SEV-ES string io

 - Make sure the kernel mappings are present in trampoline_pgd in order
   to prevent any potential accesses to unmapped memory after switching
   to it

 - Fix a trivial list corruption in objtool's pv_ops validation

 - Disable the clocksource watchdog for TSC on platforms which claim
   that the TSC is constant, doesn't stop in sleep states, CPU has TSC
   adjust and the number of sockets of the platform are max 2, to
   prevent erroneous markings of the TSC as unstable.

 - Make sure TSC adjust is always checked not only when going idle

 - Prevent a stack leak by initializing struct _fpx_sw_bytes properly in
   the FPU code

 - Fix INTEL_FAM6_RAPTORLAKE define naming to adhere to the convention

* tag 'x86_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/xen: Add xenpv_restore_regs_and_return_to_usermode()
  x86/entry: Use the correct fence macro after swapgs in kernel CR3
  x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry()
  x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword
  x86/64/mm: Map all kernel memory into trampoline_pgd
  objtool: Fix pv_ops noinstr validation
  x86/tsc: Disable clocksource watchdog for TSC on qualified platorms
  x86/tsc: Add a timer to make sure TSC_adjust is always checked
  x86/fpu/signal: Initialize sw_bytes in save_xstate_epilog()
  x86/cpu: Drop spurious underscore from RAPTOR_LAKE #define

Pull more kvm fixes from Paolo Bonzini:

 - Static analysis fix

 - New SEV-ES protocol for communicating invalid VMGEXIT requests

 - Ensure APICv is considered inactive if there is no APIC

 - Fix reserved bits for AMD PerfEvtSeln register

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure
  KVM: SEV: Fall back to vmalloc for SEV-ES scratch area if necessary
  KVM: SEV: Return appropriate error codes if SEV-ES scratch setup fails
  KVM: x86/mmu: Retry page fault if root is invalidated by memslot update
  KVM: VMX: Set failure code in prepare_vmcs02()
  KVM: ensure APICv is considered inactive if there is no APIC
  KVM: x86/pmu: Fix reserved bits for AMD PerfEvtSeln register

Currently, an SEV-ES guest is terminated if the validation of the VMGEXIT
exit code or exit parameters fails.

The VMGEXIT instruction can be issued from userspace, even though
userspace (likely) can't update the GHCB. To prevent userspace from being
able to kill the guest, return an error through the GHCB when validation
fails rather than terminating the guest. For cases where the GHCB can't be
updated (e.g. the GHCB can't be mapped, etc.), just return back to the
guest.

The new error codes are documented in the lasest update to the GHCB
specification.

Fixes: 291bd20d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <b57280b5562893e2616257ac9c2d4525a9aeeb42.1638471124.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use kvzalloc() to allocate KVM's buffer for SEV-ES's GHCB scratch area so
that KVM falls back to __vmalloc() if physically contiguous memory isn't
available.  The buffer is purely a KVM software construct, i.e. there's
no need for it to be physically contiguous.

Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109222350.2266045-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Return appropriate error codes if setting up the GHCB scratch area for an
SEV-ES guest fails.  In particular, returning -EINVAL instead of -ENOMEM
when allocating the kernel buffer could be confusing as userspace would
likely suspect a guest issue.

Fixes: 8f423a80 ("KVM: SVM: Support MMIO for an SEV-ES guest")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109222350.2266045-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull xfs fix from Darrick Wong:
 "Remove an unnecessary (and backwards) rename flags check that
  duplicates a VFS level check"

* tag 'xfs-5.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: remove incorrect ASSERT in xfs_rename

Pull cifs fixes from Steve French:
 "Three SMB3 multichannel/fscache fixes and a DFS fix.

  In testing multichannel reconnect scenarios recently various problems
  with the cifs.ko implementation of fscache were found (e.g. incorrect
  initialization of fscache cookies in some cases)"

* tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: avoid use of dstaddr as key for fscache client cookie
  cifs: add server conn_id to fscache client cookie
  cifs: wait for tcon resource_id before getting fscache super
  cifs: fix missed refcounting of ipc tcon

In commit c8c37359 ("parisc: Enhance detection of synchronous cr16
clocksources") I assumed that CPUs on the same physical core are syncronous.
While booting up the kernel on two different C8000 machines, one with a
dual-core PA8800 and one with a dual-core PA8900 CPU, this turned out to be
wrong. The symptom was that I saw a jump in the internal clocks printed to the
syslog and strange overall behaviour.  On machines which have 4 cores (2
dual-cores) the problem isn't visible, because the current logic already marked
the cr16 clocksource unstable in this case.

This patch now marks the cr16 interval timers unstable if we have more than one
CPU in the system, and it fixes this issue.

Fixes: c8c37359 ("parisc: Enhance detection of synchronous cr16 clocksources")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.15+

On newer debian releases the debian-provided "installkernel" script is
installed in /usr/sbin. Fix the kernel install.sh script to look for the
script in this directory as well.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v3.13+

Pull block fix from Jens Axboe:
 "A single fix for repeated printk spam from loop"

* tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
  loop: Use pr_warn_once() for loop_control_remove() warning

Pull io_uring fix from Jens Axboe:
 "Just a single fix preventing repeated retries of task_work based io-wq
  thread creation, fixing a regression from when io-wq was made more (a
  bit too much) resilient against signals"

* tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
  io-wq: don't retry task_work creation failure on fatal conditions

Pull SCSI fixes from James Bottomley:
 "Two patches, both in drivers.

  One is a fix to FC recovery (lpfc) and the other is an enhancement to
  support the Intel Alder Motherboard with the UFS driver which comes
  under the -rc exception process for hardware enabling"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: ufs-pci: Add support for Intel ADL
  scsi: lpfc: Fix non-recovery of remote ports following an unsolicited LOGO

Pull gfs2 fixes from Andreas Gruenbacher:

 - Since commit 486408d6 ("gfs2: Cancel remote delete work
   asynchronously"), inode create and lookup-by-number can overlap more
   easily and we can end up with temporary duplicate inodes. Fix the
   code to prevent that.

 - Fix a BUG demoting weak glock holders from a remote node.

* tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: gfs2_create_inode rework
  gfs2: gfs2_inode_lookup rework
  gfs2: gfs2_inode_lookup cleanup
  gfs2: Fix remote demote of weak glock holders

Commit d81ae8aa ("sched/uclamp: Fix initialization of struct
uclamp_rq") introduced a bug where uclamp_max of the rq is not reset to
match the woken up task's uclamp_max when the rq is idle.

The code was relying on rq->uclamp_max initialized to zero, so on first
enqueue

	static inline void uclamp_rq_inc_id(struct rq *rq, struct task_struct *p,
					    enum uclamp_id clamp_id)
	{
		...

		if (uc_se->value > READ_ONCE(uc_rq->value))
			WRITE_ONCE(uc_rq->value, uc_se->value);
	}

was actually resetting it. But since commit d81ae8aa changed the
default to 1024, this no longer works. And since rq->uclamp_flags is
also initialized to 0, neither above code path nor uclamp_idle_reset()
update the rq->uclamp_max on first wake up from idle.

This is only visible from first wake up(s) until the first dequeue to
idle after enabling the static key. And it only matters if the
uclamp_max of this task is < 1024 since only then its uclamp_max will be
effectively ignored.

Fix it by properly initializing rq->uclamp_flags = UCLAMP_FLAG_IDLE to
ensure uclamp_idle_reset() is called which then will update the rq
uclamp_max value as expected.

Fixes: d81ae8aa ("sched/uclamp: Fix initialization of struct uclamp_rq")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20211202112033.1705279-1-qais.yousef@arm.com

__setup() callbacks expect 1 for success and 0 for failure. Correct the
usage here to reflect that.

Fixes: 826bfeb3 ("preempt/dynamic: Support dynamic preempt with preempt= boot option")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211203233203.133581-1-ahalaney@redhat.com

Pull VFIO fixes from Alex Williamson:

 - Fix OpRegion pointer arithmetic (Zhenyu Wang)

 - Fix comment format triggering kernel-doc warnings (Randy Dunlap)

* tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfio:
  vfio/pci: Fix OpRegion read
  vfio: remove all kernel-doc notation

Pull power management fixes from Rafael Wysocki:
 "These fix a CPU hot-add issue in the cpufreq core, fix a comment in
  the cpufreq core code and update its documentation, and disable the
  DTPM (Dynamic Thermal Power Management) code for the time being to
  prevent it from causing issues to appear.

  Specifics:

   - Disable DTPM for this cycle to prevent it from causing issues to
     appear on otherwise functional systems (Daniel Lezcano)

   - Fix cpufreq sysfs interface failure related to physical CPU hot-add
     (Xiongfeng Wang)

   - Fix comment in cpufreq core and update its documentation (Tang
     Yizhou)"

* tag 'pm-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap: DTPM: Drop unused local variable from init_dtpm()
  cpufreq: docs: Update core.rst
  cpufreq: Fix a comment in cpufreq_policy_free
  powercap/drivers/dtpm: Disable DTPM at boot time
  cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink()

Pull s390 fixes from Heiko Carstens:

 - Fix potential overlap of pseudo-MMIO addresses with MIO addresses

 - Fix stack unwinder test case inline assembly compile error that
   happens with LLVM's integrated assembler

 - Update defconfigs

* tag 's390-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: update defconfigs
  s390/pci: move pseudo-MMIO to prevent MIO overlap
  s390/test_unwind: use raw opcode instead of invalid instruction

Pull arm64 fixes from Will Deacon:
 "Three arm64 fixes for -rc4.

  One of them is just a trivial documentation fix, whereas the other two
  address a warning in the kexec code and a crash in ftrace on systems
  implementing BTI.

  The latter patch has a couple of ugly ifdefs which Mark plans to clean
  up separately, but as-is the patch is straightforward for backporting
  to stable kernels.

  Summary:

   - Add missing BTI landing instructions to the ftrace*_caller
     trampolines

   - Fix kexec() WARN when DEBUG_VIRTUAL is enabled

   - Fix PAC documentation by removing stale references to compiler
     flags"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: ftrace: add missing BTIs
  arm64: kexec: use __pa_symbol(empty_zero_page)
  arm64: update PAC description for kernel

Pull i2c fixes from Wolfram Sang:
 "I2C has another set of driver bugfixes, mostly for the stm32f7 driver"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: rk3x: Handle a spurious start completion interrupt flag
  i2c: stm32f7: use proper DMAENGINE API for termination
  i2c: stm32f7: stop dma transfer in case of NACK
  i2c: stm32f7: recover the bus on access timeout
  i2c: stm32f7: flush TX FIFO upon transfer errors
  i2c: cbus-gpio: set atomic transfer callback

Pull libata fixes from Damien Le Moal:
 "Two sparse warning fixes and a couple of patches to fix an issue with
  sata_fsl driver module removal:

   - A couple of patches to avoid sparse warnings in libata-sata and in
     the pata_falcon driver (from Yang and Finn).

   - A couple of sata_fsl driver patches fixing IRQ free and proc
     unregister on module removal (from Baokun)"

* tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: replace snprintf in show functions with sysfs_emit
  sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
  sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
  pata_falcon: Avoid type warnings from sparse

server->dstaddr can change when the DNS mapping for the
server hostname changes. But conn_id is a u64 counter
that is incremented each time a new TCP connection
is setup. So use only that as a key.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>