[ Upstream commit d2a36971 ]

Currently __set_phy_supported allows to add modes w/o checking whether
the PHY supports them. This is wrong, it should never add modes but
only remove modes we don't want to support.

The commit marked as fixed didn't do anything wrong, it just copied
existing functionality to the helper which is being fixed now.

Fixes: f3a6bd39 ("phylib: Add phy_set_max_speed helper")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 24be19e4 ]

NIC driver minimal MTU size shall be set to ETH_MIN_MTU, as defined in
the RFC791 and in the network stack. Remove old mlx4_en only define for
it, which was set to wrong value.

Fixes: b80f71f5 ("ethernet/mellanox: use core min/max MTU checking")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit bd5122cd ]

rx_ppp and tx_ppp can be set between 0 and 255, so don't clamp to 1.

Fixes: 6e8814ce ("net/mlx4_en: Fix mixed PFC and Global pause user control requests")
Signed-off-by: Tarick Bedeir <tarick@google.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a5d4a892 ]

When changing mtu many times with traffic, a bug is triggered:

[ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26!
[ 1035.684042] invalid opcode: 0000 [#1] SMP
[ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec
tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp
fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE
nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4
nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun
bridge stp llc ebtable_filter ebtables ip6table_filter devlink
ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel
snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul
parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm
aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper
ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs
libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic
[ 1035.684102]  pata_acpi virtio_console qxl drm_kms_helper syscopyarea
sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul
crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too
virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror
dm_region_hash dm_log dm_mod [last unloaded: 8139cp]
[ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded
Tainted: G           OE  ------------ T 3.10.0-957.el7.x86_64 #1
[ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti:
ffff8f5a2e32c000
[ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>]  [<ffffffffba3a40d0>]
dql_completed+0x180/0x190
[ 1035.684162] RSP: 0000:ffff8f5a75483e50  EFLAGS: 00010093
[ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX:
0000000000000000
[ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI:
ffff8f599fea3ec0
[ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09:
0000000000000000
[ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12:
ffff8f599fea3e00
[ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15:
0000000000000184
[ 1035.684162] FS:  00007fa8434de740(0000) GS:ffff8f5a75480000(0000)
knlGS:0000000000000000
[ 1035.684162] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4:
00000000001406e0
[ 1035.684162] Call Trace:
[ 1035.684162]  <IRQ>
[ 1035.684162]  [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp]
[ 1035.684162]  [<ffffffffba14a294>]
__handle_irq_event_percpu+0x44/0x1c0
[ 1035.684162]  [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80
[ 1035.684162]  [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60
[ 1035.684162]  [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110
[ 1035.684162]  [<ffffffffba02e554>] handle_irq+0xe4/0x1a0
[ 1035.684162]  [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0
[ 1035.684162]  [<ffffffffba76b362>] common_interrupt+0x162/0x162
[ 1035.684162]  <EOI>
[ 1035.684162]  [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70
[ 1035.684162]  [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120
[ 1035.684162]  [<ffffffffba1b64fb>] unlock_page+0x2b/0x30
[ 1035.684162]  [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0
[ 1035.684162]  [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10
[ 1035.684162]  [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0
[ 1035.684162]  [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500
[ 1035.684162]  [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150
[ 1035.684162]  [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0
[ 1035.684162]  [<ffffffffba76b788>] async_page_fault+0x28/0x30
[ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f
9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe
ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48
[ 1035.684162] RIP  [<ffffffffba3a40d0>] dql_completed+0x180/0x190
[ 1035.684162]  RSP <ffff8f5a75483e50>

It's not the same as in 7fe0ee09 patch described.
As 8139cp uses shared irq mode, other device irq will trigger
cp_interrupt to execute.

cp_change_mtu
 -> cp_close
 -> cp_open

In cp_close routine  just before free_irq(), some interrupt may occur.
In my environment, cp_interrupt exectutes and IntrStatus is 0x4,
exactly TxOk. That will cause cp_tx to wake device queue.

As device queue is started, cp_start_xmit and cp_open will run at same
time which will cause kernel BUG.

For example:
[#] for tx descriptor

At start:

[#][#][#]
num_queued=3

After cp_init_hw->cp_start_hw->netdev_reset_queue:

[#][#][#]
num_queued=0

When 8139cp starts to work then cp_tx will check
num_queued mismatchs the complete_bytes.

The patch will check IntrMask before check IntrStatus in cp_interrupt.
When 8139cp interrupt is disabled, just return.
Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1b4e5ad5 ]

In 'seg6_output', stack variable 'struct flowi6 fl6' was missing
initialization.

Fixes: 6c8702c6 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e6ac64d4 ]

While skb_push() makes the kernel panic if the skb headroom is less than
the unaligned hardware header size, it will proceed normally in case we
copy more than that because of alignment, and we'll silently corrupt
adjacent slabs.

In the case fixed by the previous patch,
"ipv6: Check available headroom in ip6_xmit() even without options", we
end up in neigh_hh_output() with 14 bytes headroom, 14 bytes hardware
header and write 16 bytes, starting 2 bytes before the allocated buffer.

Always check we're not writing before skb->head and, if the headroom is
not enough, warn and drop the packet.

v2:
 - instead of panicking with BUG_ON(), WARN_ON_ONCE() and drop the packet
   (Eric Dumazet)
 - if we avoid the panic, though, we need to explicitly check the headroom
   before the memcpy(), otherwise we'll have corrupted slabs on a running
   kernel, after we warn
 - use __skb_push() instead of skb_push(), as the headroom check is
   already implemented here explicitly (Eric Dumazet)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 66033f47 ]

Even if we send an IPv6 packet without options, MAX_HEADER might not be
enough to account for the additional headroom required by alignment of
hardware headers.

On a configuration without HYPERV_NET, WLAN, AX25, and with IPV6_TUNNEL,
sending short SCTP packets over IPv4 over L2TP over IPv6, we start with
100 bytes of allocated headroom in sctp_packet_transmit(), end up with 54
bytes after l2tp_xmit_skb(), and 14 bytes in ip6_finish_output2().

Those would be enough to append our 14 bytes header, but we're going to
align that to 16 bytes, and write 2 bytes out of the allocated slab in
neigh_hh_output().

KASan says:

[  264.967848] ==================================================================
[  264.967861] BUG: KASAN: slab-out-of-bounds in ip6_finish_output2+0x1aec/0x1c70
[  264.967866] Write of size 16 at addr 000000006af1c7fe by task netperf/6201
[  264.967870]
[  264.967876] CPU: 0 PID: 6201 Comm: netperf Not tainted 4.20.0-rc4+ #1
[  264.967881] Hardware name: IBM 2827 H43 400 (z/VM 6.4.0)
[  264.967887] Call Trace:
[  264.967896] ([<00000000001347d6>] show_stack+0x56/0xa0)
[  264.967903]  [<00000000017e379c>] dump_stack+0x23c/0x290
[  264.967912]  [<00000000007bc594>] print_address_description+0xf4/0x290
[  264.967919]  [<00000000007bc8fc>] kasan_report+0x13c/0x240
[  264.967927]  [<000000000162f5e4>] ip6_finish_output2+0x1aec/0x1c70
[  264.967935]  [<000000000163f890>] ip6_finish_output+0x430/0x7f0
[  264.967943]  [<000000000163fe44>] ip6_output+0x1f4/0x580
[  264.967953]  [<000000000163882a>] ip6_xmit+0xfea/0x1ce8
[  264.967963]  [<00000000017396e2>] inet6_csk_xmit+0x282/0x3f8
[  264.968033]  [<000003ff805fb0ba>] l2tp_xmit_skb+0xe02/0x13e0 [l2tp_core]
[  264.968037]  [<000003ff80631192>] l2tp_eth_dev_xmit+0xda/0x150 [l2tp_eth]
[  264.968041]  [<0000000001220020>] dev_hard_start_xmit+0x268/0x928
[  264.968069]  [<0000000001330e8e>] sch_direct_xmit+0x7ae/0x1350
[  264.968071]  [<000000000122359c>] __dev_queue_xmit+0x2b7c/0x3478
[  264.968075]  [<00000000013d2862>] ip_finish_output2+0xce2/0x11a0
[  264.968078]  [<00000000013d9b14>] ip_finish_output+0x56c/0x8c8
[  264.968081]  [<00000000013ddd1e>] ip_output+0x226/0x4c0
[  264.968083]  [<00000000013dbd6c>] __ip_queue_xmit+0x894/0x1938
[  264.968100]  [<000003ff80bc3a5c>] sctp_packet_transmit+0x29d4/0x3648 [sctp]
[  264.968116]  [<000003ff80b7bf68>] sctp_outq_flush_ctrl.constprop.5+0x8d0/0xe50 [sctp]
[  264.968131]  [<000003ff80b7c716>] sctp_outq_flush+0x22e/0x7d8 [sctp]
[  264.968146]  [<000003ff80b35c68>] sctp_cmd_interpreter.isra.16+0x530/0x6800 [sctp]
[  264.968161]  [<000003ff80b3410a>] sctp_do_sm+0x222/0x648 [sctp]
[  264.968177]  [<000003ff80bbddac>] sctp_primitive_ASSOCIATE+0xbc/0xf8 [sctp]
[  264.968192]  [<000003ff80b93328>] __sctp_connect+0x830/0xc20 [sctp]
[  264.968208]  [<000003ff80bb11ce>] sctp_inet_connect+0x2e6/0x378 [sctp]
[  264.968212]  [<0000000001197942>] __sys_connect+0x21a/0x450
[  264.968215]  [<000000000119aff8>] sys_socketcall+0x3d0/0xb08
[  264.968218]  [<000000000184ea7a>] system_call+0x2a2/0x2c0

[...]

Just like ip_finish_output2() does for IPv4, check that we have enough
headroom in ip6_xmit(), and reallocate it if we don't.

This issue is older than git history.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ebaf39e6 ]

The *_frag_reasm() functions are susceptible to miscalculating the byte
count of packet fragments in case the truesize of a head buffer changes.
The truesize member may be changed by the call to skb_unclone(), leaving
the fragment memory limit counter unbalanced even if all fragments are
processed. This miscalculation goes unnoticed as long as the network
namespace which holds the counter is not destroyed.

Should an attempt be made to destroy a network namespace that holds an
unbalanced fragment memory limit counter the cleanup of the namespace
never finishes. The thread handling the cleanup gets stuck in
inet_frags_exit_net() waiting for the percpu counter to reach zero. The
thread is usually in running state with a stacktrace similar to:

 PID: 1073   TASK: ffff880626711440  CPU: 1   COMMAND: "kworker/u48:4"
  #5 [ffff880621563d48] _raw_spin_lock at ffffffff815f5480
  #6 [ffff880621563d48] inet_evict_bucket at ffffffff8158020b
  #7 [ffff880621563d80] inet_frags_exit_net at ffffffff8158051c
  #8 [ffff880621563db0] ops_exit_list at ffffffff814f5856
  #9 [ffff880621563dd8] cleanup_net at ffffffff814f67c0
 #10 [ffff880621563e38] process_one_work at ffffffff81096f14

It is not possible to create new network namespaces, and processes
that call unshare() end up being stuck in uninterruptible sleep state
waiting to acquire the net_mutex.

The bug was observed in the IPv6 netfilter code by Per Sundstrom.
I thank him for his analysis of the problem. The parts of this patch
that apply to IPv4 and IPv6 fragment reassembly are preemptive measures.
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Reported-by: Per Sundstrom <per.sundstrom@redqube.se>
Acked-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 990d7184 upstream.

NullFunc packets should never be duplicate just like
QoS-NullFunc packets.

We saw a client that enters / exits power save with
NullFunc frames (and not with QoS-NullFunc) despite the
fact that the association supports HT.
This specific client also re-uses a non-zero sequence number
for different NullFunc frames.
At some point, the client had to send a retransmission of
the NullFunc frame and we dropped it, leading to a
misalignment in the power save state.
Fix this by never consider a NullFunc frame as duplicate,
just like we do for QoS NullFunc frames.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201449

CC: <stable@vger.kernel.org>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9ec1190d upstream.

If the buffered broadcast queue contains packets, letting new packets bypass
that queue can lead to heavy reordering, since the driver is probably throttling
transmission of buffered multicast packets after beacons.

Keep buffering packets until the buffer has been cleared (and no client
is in powersave mode).

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a317e65f upstream.

Make it behave like regular ieee80211_tx_status calls, except for the lack of
filtered frame processing.
This fixes spurious low-ack triggered disconnections with powersave clients
connected to an AP.

Fixes: f027c2ac ("mac80211: add ieee80211_tx_status_noskb")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5c21e810 upstream.

This fixes stale beacon-int values that would keep a netdev
from going up.

To reproduce:

Create two VAP on one radio.
vap1 has beacon-int 100, start it.
vap2 has beacon-int 240, start it (and it will fail
  because beacon-int mismatch).
reconfigure vap2 to have beacon-int 100 and start it.
  It will fail because the stale beacon-int 240 will be used
  in the ifup path and hostapd never gets a chance to set the
  new beacon interval.

Cc: stable@vger.kernel.org
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a1881c9b upstream.

Otherwise if network manager starts configuring Wi-Fi interface
immidiatelly after getting notification of its creation, we will get
NULL pointer dereference:

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff95ae94c8>] hrtimer_active+0x28/0x50
  ...
  Call Trace:
   [<ffffffff95ae9997>] ? hrtimer_try_to_cancel+0x27/0x110
   [<ffffffff95ae9a95>] ? hrtimer_cancel+0x15/0x20
   [<ffffffffc0803bf0>] ? mac80211_hwsim_config+0x140/0x1c0 [mac80211_hwsim]

Cc: stable@vger.kernel.org
Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@globallogic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ae86cbfe upstream.

Commit cfe30b87 "libnvdimm, pmem: adjust for section collisions with
'System RAM'" enabled Linux to workaround occasions where platform
firmware arranges for "System RAM" and "Persistent Memory" to collide
within a single section boundary. Unfortunately, as reported in this
issue [1], platform firmware can inflict the same collision between
persistent memory regions.

The approach of interrogating iomem_resource does not work in this
case because platform firmware may merge multiple regions into a single
iomem_resource range. Instead provide a method to interrogate regions
that share the same parent bus.

This is a stop-gap until the core-MM can grow support for hotplug on
sub-section boundaries.

[1]: https://github.com/pmem/ndctl/issues/76

Fixes: cfe30b87 ("libnvdimm, pmem: adjust for section collisions with...")
Cc: <stable@vger.kernel.org>
Reported-by: Patrick Geary <patrickg@supermicro.com>
Tested-by: Patrick Geary <patrickg@supermicro.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dada6a43 upstream.

This patch is trying to fix KE issue due to
"BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198"
reported by Syzkaller scan."

[26364:syz-executor0][name:report8t]BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198
[26364:syz-executor0][name:report&]Read of size 1 at addr ffffff900e44f95f by task syz-executor0/26364
[26364:syz-executor0][name:report&]
[26364:syz-executor0]CPU: 7 PID: 26364 Comm: syz-executor0 Tainted: G W 0
[26364:syz-executor0]Call trace:
[26364:syz-executor0][<ffffff9008095cf8>] dump_bacIctrace+Ox0/0x470
[26364:syz-executor0][<ffffff9008096de0>] show_stack+0x20/0x30
[26364:syz-executor0][<ffffff90089cc9c8>] dump_stack+Oxd8/0x128
[26364:syz-executor0][<ffffff90084edb38>] print_address_description +0x80/0x4a8
[26364:syz-executor0][<ffffff90084ee270>] kasan_report+Ox178/0x390
[26364:syz-executor0][<ffffff90084ee4a0>] _asan_report_loadi_noabort+Ox18/0x20
[26364:syz-executor0][<ffffff9008b092ac>] param_set_kgdboc_var+Ox194/0x198
[26364:syz-executor0][<ffffff900813af64>] param_attr_store+Ox14c/0x270
[26364:syz-executor0][<ffffff90081394c8>] module_attr_store+0x60/0x90
[26364:syz-executor0][<ffffff90086690c0>] sysfs_kl_write+Ox100/0x158
[26364:syz-executor0][<ffffff9008666d84>] kernfs_fop_write+0x27c/0x3a8
[26364:syz-executor0][<ffffff9008508264>] do_loop_readv_writev+0x114/0x1b0
[26364:syz-executor0][<ffffff9008509ac8>] do_readv_writev+0x4f8/0x5e0
[26364:syz-executor0][<ffffff9008509ce4>] vfs_writev+0x7c/Oxb8
[26364:syz-executor0][<ffffff900850ba64>] SyS_writev+Oxcc/0x208
[26364:syz-executor0][<ffffff90080883f0>] elO_svc_naked +0x24/0x28
[26364:syz-executor0][name:report&]
[26364:syz-executor0][name:report&]The buggy address belongs to the variable:
[26364:syz-executor0][name:report&] kgdb_tty_line+Ox3f/0x40
[26364:syz-executor0][name:report&]
[26364:syz-executor0][name:report&]Memory state around the buggy address:
[26364:syz-executor0] ffffff900e44f800: 00 00 00 00 00 04 fa fa fa fa fa fa 00 fa fa fa
[26364:syz-executor0] ffffff900e44f880: fa fa fa fa 00 fa fa fa fa fa fa fa 00 fa fa fa
[26364:syz-executor0]> ffffff900e44f900: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00
[26364:syz-executor0][name:report&]                                       ^
[26364:syz-executor0] ffffff900e44f980: 00 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa
[26364:syz-executor0] ffffff900e44fa00: 04 fa fa fa fa fa fa fa 00 fa fa fa fa fa fa fa
[26364:syz-executor0][name:report&]
[26364:syz-executor0][name:panic&]Disabling lock debugging due to kernel taint
[26364:syz-executor0]------------[cut here]------------

After checking the source code, we've found there might be an out-of-bounds
access to "config[len - 1]" array when the variable "len" is zero.
Signed-off-by: Macpaul Lin <macpaul@gmail.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2a486026 upstream.

Since Commit 761ed4a9 ('tty: serial_core: convert uart_close to use
tty_port_close') and Commit 4dda864d ('tty: serial_core: Fix serial
console crash on port shutdown), a serial port which is used as
console can be stuck when logging out if there is a remained process.
After logged out, agetty will try to grab the serial port but it will
be failed because the previous process did not release the port
correctly. To fix this, TTY_IO_ERROR bit should not be enabled of
tty_port_close if the port is console port.

Reproduce step:
- Run background processes from serial console
$ while true; do sleep 10; done &

- Log out
$ logout
-> Stuck

- Read journal log by journalctl | tail
Jan 28 16:07:01 ubuntu systemd[1]: Stopped Serial Getty on ttyAMA0.
Jan 28 16:07:01 ubuntu systemd[1]: Started Serial Getty on ttyAMA0.
Jan 28 16:07:02 ubuntu agetty[1643]: /dev/ttyAMA0: not a tty

Fixes: 761ed4a9 ("tty: serial_core: convert uart_close to use tty_port_close")
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Rob Herring <robh@kernel.org>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Chanho Park <parkch98@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 100bc3e2 upstream.

serial8250_register_8250_port calls uart_config_port, which calls
config_port on the port before it tries to power on the port. So we need
the port to be on before calling serial8250_register_8250_port. Change
the code to always do a runtime resume in probe before registering port,
and always do a runtime suspend in remove.

This basically reverts the change in commit 68e5fc4a ("tty: serial:
8250_mtk: use pm_runtime callbacks for enabling"), but still use
pm_runtime callbacks.

Fixes: 68e5fc4a ("tty: serial: 8250_mtk: use pm_runtime callbacks for enabling")
Signed-off-by: Peter Shih <pihsun@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 37c2578c upstream.

vmbus_process_offer() mustn't call channel->sc_creation_callback()
directly for sub-channels, because sc_creation_callback() ->
vmbus_open() may never get the host's response to the
OPEN_CHANNEL message (the host may rescind a channel at any time,
e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind()
may not wake up the vmbus_open() as it's blocked due to a non-zero
vmbus_connection.offer_in_progress, and finally we have a deadlock.

The above is also true for primary channels, if the related device
drivers use sync probing mode by default.

And, usually the handling of primary channels and sub-channels can
depend on each other, so we should offload them to different
workqueues to avoid possible deadlock, e.g. in sync-probing mode,
NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() ->
rtnl_lock(), and causes deadlock: the former gets the rtnl_lock
and waits for all the sub-channels to appear, but the latter
can't get the rtnl_lock and this blocks the handling of sub-channels.

The patch can fix the multiple-NIC deadlock described above for
v3.x kernels (e.g. RHEL 7.x) which don't support async-probing
of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing
but don't enable async-probing for Hyper-V drivers (yet).

The patch can also fix the hang issue in sub-channel's handling described
above for all versions of kernels, including v4.19 and v4.20-rc4.

So actually the patch should be applied to all the existing kernels,
not only the kernels that have 8195b139.

Fixes: 8195b139 ("hv_netvsc: fix deadlock on hotplug")
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a81a7c9c upstream.

Some variants require different MC firmware images.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d7fd6765 upstream.

Some new variants require updated firmware.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert commit ef9209b6 "staging: rtl8723bs: Fix indenting errors and an off-by-one mistake in core/rtw_mlme_ext.c"

commit 87e4a540 upstream.

pstapriv->max_num_sta is always <= NUM_STA, since max_num_sta is either
set in _rtw_init_sta_priv() or rtw_set_beacon().

Fixes: ef9209b6 ("staging: rtl8723bs: Fix indenting errors and an off-by-one mistake in core/rtw_mlme_ext.c")
Signed-off-by: Young Xiao <YangX92@hotmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 300cd664 upstream.

In commit 8b7a13c3 ("staging: r8712u: Fix possible buffer
overrun") we fix a potential off by one by making the limit smaller.
The better fix is to make the buffer larger.  This makes it match up
with the similar code in other drivers.

Fixes: 8b7a13c3 ("staging: r8712u: Fix possible buffer overrun")
Signed-off-by: Young Xiao <YangX92@hotmail.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c988de29 upstream.

Make sure to use the CIFS_DIR_SEP(cifs_sb) as path separator for
prefixpath too. Fixes a bug with smb1 UNIX extensions.

Fixes: a6b5058f ("fs/cifs: make share unaccessible at root level mountable")
Signed-off-by: Paulo Alcantara <palcantara@suse.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[for older kernels only, atomisp has been removed from upstream]

gcc-8 rightfully warns that this instance of strncpy is just copying
from the source, to the same source, for a few bytes.  Meaning this call
does nothing.  As the author of the code obviously meant it to do
something, but this code must be working properly, just replace the call
to the kernel internal strscpy() which gcc doesn't know about, so the
warning goes away.

As this driver was deleted from newer kernel versions, none of this
really matters but now at least we do not have to worry about a build
warning in the stable trees.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[for older kernels only, lustre has been removed from upstream]

When someone writes:
	strncpy(dest, source, sizeof(source));
they really are just doing the same thing as:
	strcpy(dest, source);
but somehow they feel better because they are now using the "safe"
version of the string functions.  Cargo-cult programming at its
finest...

gcc-8 rightfully warns you about doing foolish things like this.  Now
that the stable kernels are all starting to be built using gcc-8, let's
get rid of this warning so that we do not have to gaze at this horror.

To dropt the warning, just convert the code to using strcpy() so that if
someone really wants to audit this code and find all of the obvious
problems, it will be easier to do so.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7d63fb3a upstream.

This removes needless use of '%p', and refactors the printk calls to
use pr_*() helpers instead.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[bwh: Backported to 4.14:
 - Adjust filename
 - Remove "swiotlb: " prefix from an additional log message]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 91291e99 upstream.

This patch adds f2fs_is_valid_blkaddr() in below functions to do sanity
check with block address to avoid pentential panic:
- f2fs_grab_read_bio()
- __written_first_block()

https://bugzilla.kernel.org/show_bug.cgi?id=200465

- Reproduce

- POC (poc.c)
    #define _GNU_SOURCE
    #include <sys/types.h>
    #include <sys/mount.h>
    #include <sys/mman.h>
    #include <sys/stat.h>
    #include <sys/xattr.h>

    #include <dirent.h>
    #include <errno.h>
    #include <error.h>
    #include <fcntl.h>
    #include <stdio.h>
    #include <stdlib.h>
    #include <string.h>
    #include <unistd.h>

    #include <linux/falloc.h>
    #include <linux/loop.h>

    static void activity(char *mpoint) {

      char *xattr;
      int err;

      err = asprintf(&xattr, "%s/foo/bar/xattr", mpoint);

      char buf2[113];
      memset(buf2, 0, sizeof(buf2));
      listxattr(xattr, buf2, sizeof(buf2));

    }

    int main(int argc, char *argv[]) {
      activity(argv[1]);
      return 0;
    }

- kernel message
[  844.718738] F2FS-fs (loop0): Mounted with checkpoint version = 2
[  846.430929] F2FS-fs (loop0): access invalid blkaddr:1024
[  846.431058] WARNING: CPU: 1 PID: 1249 at fs/f2fs/checkpoint.c:154 f2fs_is_valid_blkaddr+0x10f/0x160
[  846.431059] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper
[  846.431310] CPU: 1 PID: 1249 Comm: a.out Not tainted 4.18.0-rc3+ #1
[  846.431312] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[  846.431315] RIP: 0010:f2fs_is_valid_blkaddr+0x10f/0x160
[  846.431316] Code: 00 eb ed 31 c0 83 fa 05 75 ae 48 83 ec 08 48 8b 3f 89 f1 48 c7 c2 fc 0b 0f 8b 48 c7 c6 8b d7 09 8b 88 44 24 07 e8 61 8b ff ff <0f> 0b 0f b6 44 24 07 48 83 c4 08 eb 81 4c 8b 47 10 8b 8f 38 04 00
[  846.431347] RSP: 0018:ffff961c414a7bc0 EFLAGS: 00010282
[  846.431349] RAX: 0000000000000000 RBX: ffffc5f787b8ea80 RCX: 0000000000000000
[  846.431350] RDX: 0000000000000000 RSI: ffff89dfffd165d8 RDI: ffff89dfffd165d8
[  846.431351] RBP: ffff961c414a7c20 R08: 0000000000000001 R09: 0000000000000248
[  846.431353] R10: 0000000000000000 R11: 0000000000000248 R12: 0000000000000007
[  846.431369] R13: ffff89dff5492800 R14: ffff89dfae3aa000 R15: ffff89dff4ff88d0
[  846.431372] FS:  00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000
[  846.431373] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  846.431374] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0
[  846.431384] Call Trace:
[  846.431426]  f2fs_iget+0x6f4/0xe70
[  846.431430]  ? f2fs_find_entry+0x71/0x90
[  846.431432]  f2fs_lookup+0x1aa/0x390
[  846.431452]  __lookup_slow+0x97/0x150
[  846.431459]  lookup_slow+0x35/0x50
[  846.431462]  walk_component+0x1c6/0x470
[  846.431479]  ? memcg_kmem_charge_memcg+0x70/0x90
[  846.431488]  ? page_add_file_rmap+0x13/0x200
[  846.431491]  path_lookupat+0x76/0x230
[  846.431501]  ? __alloc_pages_nodemask+0xfc/0x280
[  846.431504]  filename_lookup+0xb8/0x1a0
[  846.431534]  ? _cond_resched+0x16/0x40
[  846.431541]  ? kmem_cache_alloc+0x160/0x1d0
[  846.431549]  ? path_listxattr+0x41/0xa0
[  846.431551]  path_listxattr+0x41/0xa0
[  846.431570]  do_syscall_64+0x55/0x100
[  846.431583]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  846.431607] RIP: 0033:0x7f882de1c0d7
[  846.431607] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48
[  846.431639] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2
[  846.431641] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7
[  846.431642] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0
[  846.431643] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000
[  846.431645] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550
[  846.431646] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000
[  846.431648] ---[ end trace abca54df39d14f5c ]---
[  846.431651] F2FS-fs (loop0): invalid blkaddr: 1024, type: 5, run fsck to fix.
[  846.431762] WARNING: CPU: 1 PID: 1249 at fs/f2fs/f2fs.h:2697 f2fs_iget+0xd17/0xe70
[  846.431763] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper
[  846.431797] CPU: 1 PID: 1249 Comm: a.out Tainted: G        W         4.18.0-rc3+ #1
[  846.431798] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[  846.431800] RIP: 0010:f2fs_iget+0xd17/0xe70
[  846.431801] Code: ff ff 48 63 d8 e9 e1 f6 ff ff 48 8b 45 c8 41 b8 05 00 00 00 48 c7 c2 d8 e8 0e 8b 48 c7 c6 1d b0 0a 8b 48 8b 38 e8 f9 b4 00 00 <0f> 0b 48 8b 45 c8 f0 80 48 48 04 e9 d8 f9 ff ff 0f 0b 48 8b 43 18
[  846.431832] RSP: 0018:ffff961c414a7bd0 EFLAGS: 00010282
[  846.431834] RAX: 0000000000000000 RBX: ffffc5f787b8ea80 RCX: 0000000000000006
[  846.431835] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff89dfffd165d0
[  846.431836] RBP: ffff961c414a7c20 R08: 0000000000000000 R09: 0000000000000273
[  846.431837] R10: 0000000000000000 R11: ffff89dfad50ca60 R12: 0000000000000007
[  846.431838] R13: ffff89dff5492800 R14: ffff89dfae3aa000 R15: ffff89dff4ff88d0
[  846.431840] FS:  00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000
[  846.431841] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  846.431842] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0
[  846.431846] Call Trace:
[  846.431850]  ? f2fs_find_entry+0x71/0x90
[  846.431853]  f2fs_lookup+0x1aa/0x390
[  846.431856]  __lookup_slow+0x97/0x150
[  846.431858]  lookup_slow+0x35/0x50
[  846.431874]  walk_component+0x1c6/0x470
[  846.431878]  ? memcg_kmem_charge_memcg+0x70/0x90
[  846.431880]  ? page_add_file_rmap+0x13/0x200
[  846.431882]  path_lookupat+0x76/0x230
[  846.431884]  ? __alloc_pages_nodemask+0xfc/0x280
[  846.431886]  filename_lookup+0xb8/0x1a0
[  846.431890]  ? _cond_resched+0x16/0x40
[  846.431891]  ? kmem_cache_alloc+0x160/0x1d0
[  846.431894]  ? path_listxattr+0x41/0xa0
[  846.431896]  path_listxattr+0x41/0xa0
[  846.431898]  do_syscall_64+0x55/0x100
[  846.431901]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  846.431902] RIP: 0033:0x7f882de1c0d7
[  846.431903] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48
[  846.431934] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2
[  846.431936] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7
[  846.431937] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0
[  846.431939] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000
[  846.431940] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550
[  846.431941] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000
[  846.431943] ---[ end trace abca54df39d14f5d ]---
[  846.432033] F2FS-fs (loop0): access invalid blkaddr:1024
[  846.432051] WARNING: CPU: 1 PID: 1249 at fs/f2fs/checkpoint.c:154 f2fs_is_valid_blkaddr+0x10f/0x160
[  846.432051] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper
[  846.432085] CPU: 1 PID: 1249 Comm: a.out Tainted: G        W         4.18.0-rc3+ #1
[  846.432086] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[  846.432089] RIP: 0010:f2fs_is_valid_blkaddr+0x10f/0x160
[  846.432089] Code: 00 eb ed 31 c0 83 fa 05 75 ae 48 83 ec 08 48 8b 3f 89 f1 48 c7 c2 fc 0b 0f 8b 48 c7 c6 8b d7 09 8b 88 44 24 07 e8 61 8b ff ff <0f> 0b 0f b6 44 24 07 48 83 c4 08 eb 81 4c 8b 47 10 8b 8f 38 04 00
[  846.432120] RSP: 0018:ffff961c414a7900 EFLAGS: 00010286
[  846.432122] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000006
[  846.432123] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff89dfffd165d0
[  846.432124] RBP: ffff89dff5492800 R08: 0000000000000001 R09: 000000000000029d
[  846.432125] R10: ffff961c414a7820 R11: 000000000000029d R12: 0000000000000400
[  846.432126] R13: 0000000000000000 R14: ffff89dff4ff88d0 R15: 0000000000000000
[  846.432128] FS:  00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000
[  846.432130] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  846.432131] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0
[  846.432135] Call Trace:
[  846.432151]  f2fs_wait_on_block_writeback+0x20/0x110
[  846.432158]  f2fs_grab_read_bio+0xbc/0xe0
[  846.432161]  f2fs_submit_page_read+0x21/0x280
[  846.432163]  f2fs_get_read_data_page+0xb7/0x3c0
[  846.432165]  f2fs_get_lock_data_page+0x29/0x1e0
[  846.432167]  f2fs_get_new_data_page+0x148/0x550
[  846.432170]  f2fs_add_regular_entry+0x1d2/0x550
[  846.432178]  ? __switch_to+0x12f/0x460
[  846.432181]  f2fs_add_dentry+0x6a/0xd0
[  846.432184]  f2fs_do_add_link+0xe9/0x140
[  846.432186]  __recover_dot_dentries+0x260/0x280
[  846.432189]  f2fs_lookup+0x343/0x390
[  846.432193]  __lookup_slow+0x97/0x150
[  846.432195]  lookup_slow+0x35/0x50
[  846.432208]  walk_component+0x1c6/0x470
[  846.432212]  ? memcg_kmem_charge_memcg+0x70/0x90
[  846.432215]  ? page_add_file_rmap+0x13/0x200
[  846.432217]  path_lookupat+0x76/0x230
[  846.432219]  ? __alloc_pages_nodemask+0xfc/0x280
[  846.432221]  filename_lookup+0xb8/0x1a0
[  846.432224]  ? _cond_resched+0x16/0x40
[  846.432226]  ? kmem_cache_alloc+0x160/0x1d0
[  846.432228]  ? path_listxattr+0x41/0xa0
[  846.432230]  path_listxattr+0x41/0xa0
[  846.432233]  do_syscall_64+0x55/0x100
[  846.432235]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  846.432237] RIP: 0033:0x7f882de1c0d7
[  846.432237] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48
[  846.432269] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2
[  846.432271] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7
[  846.432272] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0
[  846.432273] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000
[  846.432274] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550
[  846.432275] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000
[  846.432277] ---[ end trace abca54df39d14f5e ]---
[  846.432279] F2FS-fs (loop0): invalid blkaddr: 1024, type: 5, run fsck to fix.
[  846.432376] WARNING: CPU: 1 PID: 1249 at fs/f2fs/f2fs.h:2697 f2fs_wait_on_block_writeback+0xb1/0x110
[  846.432376] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper
[  846.432410] CPU: 1 PID: 1249 Comm: a.out Tainted: G        W         4.18.0-rc3+ #1
[  846.432411] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[  846.432413] RIP: 0010:f2fs_wait_on_block_writeback+0xb1/0x110
[  846.432414] Code: 66 90 f0 ff 4b 34 74 59 5b 5d c3 48 8b 7d 00 41 b8 05 00 00 00 89 d9 48 c7 c2 d8 e8 0e 8b 48 c7 c6 1d b0 0a 8b e8 df bc fd ff <0f> 0b f0 80 4d 48 04 e9 67 ff ff ff 48 8b 03 48 c1 e8 37 83 e0 07
[  846.432445] RSP: 0018:ffff961c414a7910 EFLAGS: 00010286
[  846.432447] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000006
[  846.432448] RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffff89dfffd165d0
[  846.432449] RBP: ffff89dff5492800 R08: 0000000000000000 R09: 00000000000002d1
[  846.432450] R10: ffff961c414a7820 R11: ffff89dfad50cf80 R12: 0000000000000400
[  846.432451] R13: 0000000000000000 R14: ffff89dff4ff88d0 R15: 0000000000000000
[  846.432453] FS:  00007f882e2fb700(0000) GS:ffff89dfffd00000(0000) knlGS:0000000000000000
[  846.432454] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  846.432455] CR2: 0000000001a88008 CR3: 00000001eb572000 CR4: 00000000000006e0
[  846.432459] Call Trace:
[  846.432463]  f2fs_grab_read_bio+0xbc/0xe0
[  846.432464]  f2fs_submit_page_read+0x21/0x280
[  846.432466]  f2fs_get_read_data_page+0xb7/0x3c0
[  846.432468]  f2fs_get_lock_data_page+0x29/0x1e0
[  846.432470]  f2fs_get_new_data_page+0x148/0x550
[  846.432473]  f2fs_add_regular_entry+0x1d2/0x550
[  846.432475]  ? __switch_to+0x12f/0x460
[  846.432477]  f2fs_add_dentry+0x6a/0xd0
[  846.432480]  f2fs_do_add_link+0xe9/0x140
[  846.432483]  __recover_dot_dentries+0x260/0x280
[  846.432485]  f2fs_lookup+0x343/0x390
[  846.432488]  __lookup_slow+0x97/0x150
[  846.432490]  lookup_slow+0x35/0x50
[  846.432505]  walk_component+0x1c6/0x470
[  846.432509]  ? memcg_kmem_charge_memcg+0x70/0x90
[  846.432511]  ? page_add_file_rmap+0x13/0x200
[  846.432513]  path_lookupat+0x76/0x230
[  846.432515]  ? __alloc_pages_nodemask+0xfc/0x280
[  846.432517]  filename_lookup+0xb8/0x1a0
[  846.432520]  ? _cond_resched+0x16/0x40
[  846.432522]  ? kmem_cache_alloc+0x160/0x1d0
[  846.432525]  ? path_listxattr+0x41/0xa0
[  846.432526]  path_listxattr+0x41/0xa0
[  846.432529]  do_syscall_64+0x55/0x100
[  846.432531]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  846.432533] RIP: 0033:0x7f882de1c0d7
[  846.432533] Code: f0 ff ff 73 01 c3 48 8b 0d be dd 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 c2 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 dd 2b 00 f7 d8 64 89 01 48
[  846.432565] RSP: 002b:00007ffe8e66c238 EFLAGS: 00000202 ORIG_RAX: 00000000000000c2
[  846.432567] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f882de1c0d7
[  846.432568] RDX: 0000000000000071 RSI: 00007ffe8e66c280 RDI: 0000000001a880c0
[  846.432569] RBP: 00007ffe8e66c300 R08: 0000000001a88010 R09: 0000000000000000
[  846.432570] R10: 00000000000001ab R11: 0000000000000202 R12: 0000000000400550
[  846.432571] R13: 00007ffe8e66c400 R14: 0000000000000000 R15: 0000000000000000
[  846.432573] ---[ end trace abca54df39d14f5f ]---
[  846.434280] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[  846.434424] PGD 80000001ebd3a067 P4D 80000001ebd3a067 PUD 1eb1ae067 PMD 0
[  846.434551] Oops: 0000 [#1] SMP PTI
[  846.434697] CPU: 0 PID: 44 Comm: kworker/u5:0 Tainted: G        W         4.18.0-rc3+ #1
[  846.434805] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[  846.435000] Workqueue: fscrypt_read_queue decrypt_work
[  846.435174] RIP: 0010:fscrypt_do_page_crypto+0x6e/0x2d0
[  846.435351] Code: 00 65 48 8b 04 25 28 00 00 00 48 89 84 24 88 00 00 00 31 c0 e8 43 c2 e0 ff 49 8b 86 48 02 00 00 85 ed c7 44 24 70 00 00 00 00 <48> 8b 58 08 0f 84 14 02 00 00 48 8b 78 10 48 8b 0c 24 48 c7 84 24
[  846.435696] RSP: 0018:ffff961c40f9bd60 EFLAGS: 00010206
[  846.435870] RAX: 0000000000000000 RBX: ffffc5f787719b80 RCX: ffffc5f787719b80
[  846.436051] RDX: ffffffff8b9f4b88 RSI: ffffffff8b0ae622 RDI: ffff961c40f9bdb8
[  846.436261] RBP: 0000000000001000 R08: ffffc5f787719b80 R09: 0000000000001000
[  846.436433] R10: 0000000000000018 R11: fefefefefefefeff R12: ffffc5f787719b80
[  846.436562] R13: ffffc5f787719b80 R14: ffff89dff4ff88d0 R15: 0ffff89dfaddee60
[  846.436658] FS:  0000000000000000(0000) GS:ffff89dfffc00000(0000) knlGS:0000000000000000
[  846.436758] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  846.436898] CR2: 0000000000000008 CR3: 00000001eddd0000 CR4: 00000000000006f0
[  846.437001] Call Trace:
[  846.437181]  ? check_preempt_wakeup+0xf2/0x230
[  846.437276]  ? check_preempt_curr+0x7c/0x90
[  846.437370]  fscrypt_decrypt_page+0x48/0x4d
[  846.437466]  __fscrypt_decrypt_bio+0x5b/0x90
[  846.437542]  decrypt_work+0x12/0x20
[  846.437651]  process_one_work+0x15e/0x3d0
[  846.437740]  worker_thread+0x4c/0x440
[  846.437848]  kthread+0xf8/0x130
[  846.437938]  ? rescuer_thread+0x350/0x350
[  846.438022]  ? kthread_associate_blkcg+0x90/0x90
[  846.438117]  ret_from_fork+0x35/0x40
[  846.438201] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd input_leds joydev soundcore serio_raw i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 multipath linear qxl ttm crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops pcbc drm 8139too aesni_intel 8139cp floppy psmouse mii aes_x86_64 crypto_simd pata_acpi cryptd glue_helper
[  846.438653] CR2: 0000000000000008
[  846.438713] ---[ end trace abca54df39d14f60 ]---
[  846.438796] RIP: 0010:fscrypt_do_page_crypto+0x6e/0x2d0
[  846.438844] Code: 00 65 48 8b 04 25 28 00 00 00 48 89 84 24 88 00 00 00 31 c0 e8 43 c2 e0 ff 49 8b 86 48 02 00 00 85 ed c7 44 24 70 00 00 00 00 <48> 8b 58 08 0f 84 14 02 00 00 48 8b 78 10 48 8b 0c 24 48 c7 84 24
[  846.439084] RSP: 0018:ffff961c40f9bd60 EFLAGS: 00010206
[  846.439176] RAX: 0000000000000000 RBX: ffffc5f787719b80 RCX: ffffc5f787719b80
[  846.440927] RDX: ffffffff8b9f4b88 RSI: ffffffff8b0ae622 RDI: ffff961c40f9bdb8
[  846.442083] RBP: 0000000000001000 R08: ffffc5f787719b80 R09: 0000000000001000
[  846.443284] R10: 0000000000000018 R11: fefefefefefefeff R12: ffffc5f787719b80
[  846.444448] R13: ffffc5f787719b80 R14: ffff89dff4ff88d0 R15: 0ffff89dfaddee60
[  846.445558] FS:  0000000000000000(0000) GS:ffff89dfffc00000(0000) knlGS:0000000000000000
[  846.446687] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  846.447796] CR2: 0000000000000008 CR3: 00000001eddd0000 CR4: 00000000000006f0

- Location
https://elixir.bootlin.com/linux/v4.18-rc4/source/fs/crypto/crypto.c#L149
	struct crypto_skcipher *tfm = ci->ci_ctfm;
Here ci can be NULL

Note that this issue maybe require CONFIG_F2FS_FS_ENCRYPTION=y to reproduce.

Reported-by Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[bwh: Backported to 4.14: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 0472bf06 upstream.

Don't allow USB3 U1 or U2 if the latency to wake up from the U-state
reaches the service interval for a periodic endpoint.

This is according to xhci 1.1 specification section 4.23.5.2 extra note:

"Software shall ensure that a device is prevented from entering a U-state
 where its worst case exit latency approaches the ESIT."

Allowing too long exit latencies for periodic endpoint confuses xHC
internal scheduling, and new devices may fail to enumerate with a
"Not enough bandwidth for new device state" error from the host.

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a7d57abc upstream.

Occasionally AMD SNPS 3.0 xHC does not respond to
CSS when set, also it does not flag anything on SRE and HCE
to point the internal xHC errors on USBSTS register. This stalls
the entire system wide suspend and there is no point in stalling
just because of xHC CSS is not responding.

To work around this problem, if the xHC does not flag
anything on SRE and HCE, we can skip the CSS
timeout and allow the system to continue the suspend. Once the
system resume happens we can internally reset the controller
using XHCI_RESET_ON_RESUME quirk
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com>
cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Cc: <stable@vger.kernel.org>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e46daee5 upstream.

The arm compiler internally interprets an inline assembly label
as an unsigned long value, not a pointer. As a result, under
CONFIG_FORTIFY_SOURCE, the address of a label has a size of 4 bytes,
which was tripping the runtime checks. Instead, we can just cast the label
(as done with the size calculations earlier).

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1639397Reported-by: William Cohen <wcohen@redhat.com>
Fixes: 6974f0c4 ("include/linux/string.h: add the option of fortified string.h functions")
Cc: stable@vger.kernel.org
Acked-by: Laura Abbott <labbott@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: William Cohen <wcohen@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 59861547 upstream.

The driver defines three states for a cppi channel.
- idle: .chan_busy == 0 && not in .pending list
- pending: .chan_busy == 0 && in .pending list
- busy: .chan_busy == 1 && not in .pending list

There are cases in which the cppi channel could be in the pending state
when cppi41_dma_issue_pending() is called after cppi41_runtime_suspend()
is called.

cppi41_stop_chan() has a bug for these cases to set channels to idle state.
It only checks the .chan_busy flag, but not the .pending list, then later
when cppi41_runtime_resume() is called the channels in .pending list will
be transitioned to busy state.

Removing channels from the .pending list solves the problem.

Fixes: 975faaeb ("dma: cppi41: start tear down only if channel is busy")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Bin Liu <b-liu@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ffe843b1 upstream.

Intel Merrifield has a reduced size of FIFO used in iDMA 32-bit controller,
i.e. 512 bytes instead of 1024.

Fix this by partitioning it as 64 bytes per channel.

Note, in the future we might switch to 'fifo-size' property instead of
hard coded value.

Fixes: 199244d6 ("dmaengine: dw: add support of iDMA 32-bit hardware")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8dae5398 upstream.

call_encode can be invoked more than once per RPC call. Ensure that
each call to gss_wrap_req_priv does not overwrite pointers to
previously allocated memory.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 834e772c upstream.

If the network stack calls .send_pkt()/.cancel_pkt() during .release(),
a struct vhost_vsock use-after-free is possible.  This occurs because
.release() does not wait for other CPUs to stop using struct
vhost_vsock.

Switch to an RCU-enabled hashtable (indexed by guest CID) so that
.release() can wait for other CPUs by calling synchronize_rcu().  This
also eliminates vhost_vsock_lock acquisition in the data path so it
could have a positive effect on performance.

This is CVE-2018-14625 "kernel: use-after-free Read in vhost_transport_send_pkt".

Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+bd391451452fb0b93039@syzkaller.appspotmail.com
Reported-by: syzbot+e3e074963495f92a89ed@syzkaller.appspotmail.com
Reported-by: syzbot+d5a0a170c5069658b141@syzkaller.appspotmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 78b1a52e upstream.

While ccw_io_helper() seems like intended to be exclusive in a sense that
it is supposed to facilitate I/O for at most one thread at any given
time, there is actually nothing ensuring that threads won't pile up at
vcdev->wait_q. If they do, all threads get woken up and see the status
that belongs to some other request than their own. This can lead to bugs.
For an example see:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788432

This race normally does not cause any problems. The operations provided
by struct virtio_config_ops are usually invoked in a well defined
sequence, normally don't fail, and are normally used quite infrequent
too.

Yet, if some of the these operations are directly triggered via sysfs
attributes, like in the case described by the referenced bug, userspace
is given an opportunity to force races by increasing the frequency of the
given operations.

Let us fix the problem by ensuring, that for each device, we finish
processing the previous request before starting with a new one.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Cc: stable@vger.kernel.org
Message-Id: <20180925121309.58524-3-pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2448a299 upstream.

Currently we have a race on vcdev->config in virtio_ccw_get_config() and
in virtio_ccw_set_config().

This normally does not cause problems, as these are usually infrequent
operations. However, for some devices writing to/reading from the config
space can be triggered through sysfs attributes. For these, userspace can
force the race by increasing the frequency.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Cc: stable@vger.kernel.org
Message-Id: <20180925121309.58524-2-pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 54947cd6 upstream.

We've got a regression report for some Thinkpad models (at least
T570s) which shows the too low speaker output volume.  The bisection
leaded to the commit 61fcf8ec ("ALSA: hda/realtek - Enable Thinkpad
Dock device for ALC298 platform"), and it's basically adding the two
pin configurations for the dock, and looks harmless.

The real culprit seems, though, that the DAC assignment for the
speaker pin is implicitly assumed on these devices, i.e. pin NID 0x14
to be coupled with DAC NID 0x03.  When more pins are configured by the
commit above, the auto-parser changes the DAC assignment, and this
resulted in the regression.

As a workaround, just provide the fixed pin / DAC mapping table for
this Thinkpad fixup function.  It's no generic solution, but the
problem itself is pretty much device-specific, so must be good
enough.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1554304
Fixes: 61fcf8ec ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform")
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5363857b upstream.

As addressed in alsa-lib (commit b420056604f0), we need to fix the
case where the evaluation of PCM interval "(x x+1]" leading to
-EINVAL.  After applying rules, such an interval may be translated as
"(x x+1)".

Fixes: ff2d6acd ("ALSA: pcm: Fix snd_interval_refine first/last with open min/max")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b51abed8 upstream.

Currently the PCM core calls snd_pcm_unlink() always unconditionally
at closing a stream.  However, since snd_pcm_unlink() invokes the
global rwsem down, the lock can be easily contended.  More badly, when
a thread runs in a high priority RT-FIFO, it may stall at spinning.

Basically the call of snd_pcm_unlink() is required only for the linked
streams that are already rare occasion.  For normal use cases, this
code path is fairly superfluous.

As an optimization (and also as a workaround for the RT problem
above in normal situations without linked streams), this patch adds a
check before calling snd_pcm_unlink() and calls it only when needed.
Reported-by: Chanho Min <chanho.min@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>