Masking with PAGE_SIZE is just wrong...
Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When renaming kernel_fpu_using to irq_fpu_usable, the semantics of the
function is changed too, from mesuring whether kernel is using FPU,
that is, the FPU is NOT available, to measuring whether FPU is usable,
that is, the FPU is available.

But the usage of irq_fpu_usable in aesni-intel_glue.c is not changed
accordingly. This patch fixes this.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The PadLock hardware requires the output buffer for SHA to be
128-bit aligned.  We currentply place the buffer on the stack,
and ask gcc to align it to 128 bits.  That doesn't work on i386
because the kernel stack is only aligned to 32 bits.  This patch
changes the code to align the buffer by hand so that the hardware
doesn't fault on unaligned buffers.
Reported-by: Séguier Régis <rguier@e-teleport.net>
Tested-by: Séguier Régis <rguier@e-teleport.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits)
  x86: Move get/set_wallclock to x86_platform_ops
  x86: platform: Fix section annotations
  x86: apic namespace cleanup
  x86: Distangle ioapic and i8259
  x86: Add Moorestown early detection
  x86: Add hardware_subarch ID for Moorestown
  x86: Add early platform detection
  x86: Move tsc_init to late_time_init
  x86: Move tsc_calibration to x86_init_ops
  x86: Replace the now identical time_32/64.c by time.c
  x86: time_32/64.c unify profile_pc
  x86: Move calibrate_cpu to tsc.c
  x86: Make timer setup and global variables the same in time_32/64.c
  x86: Remove mca bus ifdef from timer interrupt
  x86: Simplify timer_ack magic in time_32.c
  x86: Prepare unification of time_32/64.c
  x86: Remove do_timer hook
  x86: Add timer_init to x86_init_ops
  x86: Move percpu clockevents setup to x86_init_ops
  x86: Move xen_post_allocator_init into xen_pagetable_setup_done
  ...

Fix up conflicts in arch/x86/include/asm/io_apic.h

Signed-off-by: Geoffrey Thomas <geofft@ksplice.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is largely a straightforward conversion. The patch results in
fewer output sections, and some data being reordered, but should have
no functional impact.

Also, note that this patch moves some data (namely, init_task and
cacheline-aligned) inside [_sdata,_edata].

Because frv already builds using -ffunction-sections -fdata-sections,
we can't use BSS_SECTION or RW_DATA_SECTION yet, since they do not
currently include the required .bss.* and .data.* sections.
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It appears that frv copied the .altinstructions definitions in its linker
script from x86. Since frv doesn't put anything in those sections, this
is just dead code.
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (64 commits)
  ext4: Update documentation about quota mount options
  ext4: replace MAX_DEFRAG_SIZE with EXT_MAX_BLOCK
  ext4: Fix the alloc on close after a truncate hueristic
  ext4: Add a tracepoint for ext4_alloc_da_blocks()
  ext4: store EXT4_EXT_MIGRATE in i_state instead of i_flags
  ext4: limit block allocations for indirect-block files to < 2^32
  ext4: Fix different block exchange issue in EXT4_IOC_MOVE_EXT
  ext4: Add null extent check to ext_get_path
  ext4: Replace BUG_ON() with ext4_error() in move_extents.c
  ext4: Replace get_ext_path macro with an inline funciton
  ext4: Fix include/trace/events/ext4.h to work with Systemtap
  ext4: Fix initalization of s_flex_groups
  ext4: Always set dx_node's fake_dirent explicitly.
  ext4: Fix async commit mode to be safe by using a barrier
  ext4: Don't update superblock write time when filesystem is read-only
  ext4: Clarify the locking details in mballoc
  ext4: check for need init flag in ext4_mb_load_buddy
  ext4: move ext4_mb_init_group() function earlier in the mballoc.c
  ext4: Make non-journal fsync work properly
  ext4: Assure that metadata blocks are written during fsync in no journal mode
  ...

Remove net/genetlink.h inclusion, now sched.c won't be recompiled
because of some networking changes.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allow the short description after symbol name and dash in a kernel-doc
comment to span multiple lines, e.g. like this:

	/**
	 * unmap_mapping_range - unmap the portion of all mmaps in the
	 *	specified address_space corresponding to the specified
	 *	page range in the underlying file.
	 * @mapping: the address space containing mmaps to be unmapped.
	 * ...
	 */

The short description ends with a parameter description, an empty line
or the end of the comment block.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

'current' is a pointer, so the right form is  'down_write(&current->mm->mmap_sem)'.
Signed-off-by: Jianjun Kong <jianjun@zeuux.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kref_put() already occurs after the out label
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] sizeof cleanup
  [WATCHDOG] wdt_pci: fix printk and variable type
  [WATCHDOG] wdt_pci - use pci_request_region
  [WATCHDOG] ar7_wdt: Fix error handling during probe.
  [WATCHDOG] ar7_wdt: convert to become a platform driver
  [WATCHDOG] fix book E watchdog to take WDIOC_SETTIMEOUT arg in seconds
  [WATCHDOG] davinci: use clock framework for timer frequency
  [WATCHDOG] Use DIV_ROUND_UP() macro in the coh901327 WDT
  [WATCHDOG] Add support for WM831x watchdog
  [WATCHDOG] Add watchdog driver for NUC900
  [WATCHDOG] add SBC-FITPC2 watchdog driver

* 'for-linus' of git://gitserver.sunplusct.com/linux-2.6-score: (22 commits)
  score: add TIF_NOTIFY_RESUME define in asm/thread_info.h
  score: make init_thread_union align to THREAD_SIZE
  score: update files according to review comments.
  score: add old syscall support
  score: add MEMORY_START and MEMORY_SIZE define, to make the code clear
  score: update inconsistent declare after .c was changed
  score: remove unused code, add include files in .c
  score: clean up mm/init.c
  score: make irq.h definitions local
  score: cleanups: dead code, 0 as pointer, shadowed variables
  score: fix function prototypes
  score: add address space annotations
  score: add missing #includes
  score: move save arg5 and arg6 instruction in front of enable_irq
  score: add prototypes for wrapped syscalls
  score: remove init_mm
  score: add generic sys_call_table
  score: remove __{put,get}_user_unknown
  score: unset __ARCH_WANT_IPC_PARSE_VERSION
  score: update files according to review comments
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (262 commits)
  sh: mach-ecovec24: Add user debug switch support
  sh: Kill off unused se_skipped in alignment trap notification code.
  sh: Wire up HAVE_SYSCALL_TRACEPOINTS.
  video: sh_mobile_lcdcfb: use both register sets for display panning
  video: sh_mobile_lcdcfb: implement display panning
  sh: Fix up sh7705 flush_dcache_page() build.
  sh: kfr2r09: document the PLL/FLL <-> RF relationship.
  sh: mach-ecovec24: need asm/clock.h.
  sh: mach-ecovec24: deassert usb irq on boot.
  sh: Add KEYSC support for EcoVec24
  sh: add kycr2_delay for sh_keysc
  sh: cpufreq: Include CPU id in info messages.
  sh: multi-evt support for SH-X3 proto CPU.
  sh: clkfwk: remove bogus set_bus_parent() from SH7709.
  sh: Fix the indication point of the liquid crystal of AP-325RXA(AP3300)
  sh: Add EcoVec24 romImage defconfig
  sh: USB disable process is needed if romImage boot for EcoVec24
  sh: EcoVec24: add HIZA setting for LED
  sh: EcoVec24: write MAC address in boot
  sh: Add romImage support for EcoVec24
  ...

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Clean up linker script using standard macros.
  [IA64] Use standard macros for page-aligned data.
  [IA64] Use .ref.text, not .text.init for start_ap.
  [IA64] sgi-xp: fix printk format warnings
  [IA64] ioc4_serial: fix printk format warnings
  [IA64] mbcs: fix printk format warnings
  [IA64] pci_br, fix infinite loop in find_free_ate()
  [IA64] kdump: Short path to freeze CPUs
  [IA64] kdump: Try INIT regardless of
  [IA64] kdump: Mask INIT first in panic-kdump path
  [IA64] kdump: Don't return APs to SAL from kdump
  [IA64] kexec: Unregister MCA handler before kexec
  [IA64] kexec: Make INIT safe while transition to
  [IA64] kdump: Mask MCA/INIT on frozen cpus

Fix up conflict in arch/ia64/kernel/vmlinux.lds.S as per Tony's
suggestion.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: add fusectl interface to max_background
  fuse: limit user-specified values of max background requests
  fuse: use drop_nlink() instead of direct nlink manipulation
  fuse: document protocol version negotiation
  fuse: make the number of max background requests and congestion threshold tunable

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (55 commits)
  regulator: Voltage count for AB3100
  mfd: Convert WM8350 to use request_threaded_irq()
  mfd: Update MAINTAINERS patterns for WM831x
  mfd: Fix twl4030-power warnings
  regulator: AB3100 support
  rtc: AB3100 RTC support
  mfd: Fix ab3100-otp build failure
  mfd: OMAP: Board-specifc twl4030 DPS scripts for RX51 board
  mfd: Print warning for twl4030 out-of-order script loading
  mfd: Add support for TWL4030/5030 dynamic power switching
  mfd: AB3100 OTP readout
  regulator: Add Freescale MC13783 driver
  mfd: Add Freescale MC13783 driver
  mfd: AB3100 disable irq nosync
  mfd: AB3100 alter default setting
  mfd: AB3100 propagate error
  mfd: AB3100 accessor function cleanups
  rtc: Add support for RTCs on Wolfson WM831x devices
  regulator: get pcap data from the parent device
  input: PCAP2 misc input driver
  ...

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci

* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (62 commits)
  DaVinci: DM646x - platform changes for vpif capture and display drivers
  davinci: DM355 - platform changes for vpfe capture
  davinci: DM644x platform changes for vpfe capture
  davinci: audio: move tlv320aic33 i2c setup into board files
  DaVinci: EDMA: Adding 2 new APIs for allocating/freeing PARAMs
  DaVinci: DM365: Adding entries for DM365 IRQ's
  DaVinci: DM355: Adding PINMUX entries for DM355 Display
  davinci: Handle pinmux conflict between mmc/sd and nor flash
  davinci: Add NOR flash support for da850/omap-l138
  davinci: Add NAND flash support for DA850/OMAP-L138
  davinci: Add MMC/SD support for da850/omap-l138
  davinci: Add platform support for da850/omap-l138 GLCD
  davinci: Macro to convert GPIO signal to GPIO pin number
  davinci: Audio support for DA850/OMAP-L138 EVM
  davinci: Audio support for DA830 EVM
  davinci: Correct the number of GPIO pins for da850/omap-l138
  davinci: Configure MDIO pins for EMAC
  DaVinci: DM365: Add Support for new Revision of silicon
  DaVinci: DM365: Fix Compilation issue due to PINMUX entry
  DaVinci: EDMA: Updating default queue handling
  ...

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (47 commits)
  OMAP clock: use debugfs_remove_recursive() for rewinding
  OMAP2/3/4 core: create omap_device layer
  OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects
  OMAP2/3/4: create omap_hwmod layer
  OMAP2/3 board-*.c files: read bootloader configuration earlier
  OMAP2/3/4 PRCM: add module IDLEST wait code
  OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer
  OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm
  OMAP clock: associate MPU clocks with the mpu_clkdm
  OMAP3 clock: Fixed processing of bootarg 'mpurate'
  OMAP: SDRC: Add several new register definitions
  OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups.
  OMAP: PM: Added suspend target state control to debugfs for OMAP3
  OMAP: PM debug: Add PRCM register dump support
  OMAP: PM debug: make powerdomains use PM-debug counters
  OMAP: PM: Add pm-debug counters
  OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.
  OMAP: PM: Hook into PM counters
  OMAP: PM counter infrastructure.
  OMAP3: PM: fix lockdep warning caused by omap3_pm_init
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: use kernel_sendpage
  dlm: fix connection close handling
  dlm: fix double-release of socket in error exit path

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  ext3: Flush disk caches on fsync when needed
  ext3: Add locking to ext3_do_update_inode
  ext3: Fix possible deadlock between ext3_truncate() and ext3_get_blocks()
  jbd: Annotate transaction start also for journal_restart()
  jbd: Journal block numbers can ever be only 32-bit use unsigned int for them
  ext3: Update MAINTAINERS for ext3 and JBD
  JBD: round commit timer up to avoid uncommitted transaction

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix NULL ptr regression in powernow-k8
  [CPUFREQ] Create a blacklist for processors that should not load the acpi-cpufreq module.
  [CPUFREQ] Powernow-k8: Enable more than 2 low P-states
  [CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)
  [CPUFREQ] ondemand - Use global sysfs dir for tuning settings
  [CPUFREQ] Introduce global, not per core: /sys/devices/system/cpu/cpufreq
  [CPUFREQ] Bail out of cpufreq_add_dev if the link for a managed CPU got created
  [CPUFREQ] Factor out policy setting from cpufreq_add_dev
  [CPUFREQ] Factor out interface creation from cpufreq_add_dev
  [CPUFREQ] Factor out symlink creation from cpufreq_add_dev
  [CPUFREQ] cleanup up -ENOMEM handling in cpufreq_add_dev
  [CPUFREQ] Reduce scope of cpu_sys_dev in cpufreq_add_dev
  [CPUFREQ] update Doc for cpuinfo_cur_freq and scaling_cur_freq

* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (34 commits)
  time: Prevent 32 bit overflow with set_normalized_timespec()
  clocksource: Delay clocksource down rating to late boot
  clocksource: clocksource_select must be called with mutex locked
  clocksource: Resolve cpu hotplug dead lock with TSC unstable, fix crash
  timers: Drop a function prototype
  clocksource: Resolve cpu hotplug dead lock with TSC unstable
  timer.c: Fix S/390 comments
  timekeeping: Fix invalid getboottime() value
  timekeeping: Fix up read_persistent_clock() breakage on sh
  timekeeping: Increase granularity of read_persistent_clock(), build fix
  time: Introduce CLOCK_REALTIME_COARSE
  x86: Do not unregister PIT clocksource on PIT oneshot setup/shutdown
  clocksource: Avoid clocksource watchdog circular locking dependency
  clocksource: Protect the watchdog rating changes with clocksource_mutex
  clocksource: Call clocksource_change_rating() outside of watchdog_lock
  timekeeping: Introduce read_boot_clock
  timekeeping: Increase granularity of read_persistent_clock()
  timekeeping: Update clocksource with stop_machine
  timekeeping: Add timekeeper read_clock helper functions
  timekeeping: Move NTP adjusted clock multiplier to struct timekeeper
  ...

Fix trivial conflict due to MIPS lemote -> loongson renaming.

Commit ac89a917 ("pty: don't limit the writes to 'pty_space()' inside
'pty_write()'") removed the pty_space() checking, in order to let the
regular tty buffer code limit the buffering itself.

That was all good, but as a subtle side effect it meant that we'd be
doing a tty_wakeup() even in the case where the buffers were all filled
up, and didn't actually make any progress on the write.

Which sounds innocuous, but it interacts very badly with the ppp_async
code, which has an infinite loop in ppp_async_push() that tries to push
out data to the tty.  When we call tty_wakeup(), that loop ends up
thinking that progress was made (see the subtle interactions between
XMIT_WAKEUP and 'tty_stuffed' for details).  End result: one unhappy ppp
user.

Fixed by noticing when tty_insert_flip_string() didn't actually do
anything, and then not doing any more processing (including, very much
not calling tty_wakeup()).
Bisected-and-tested-by: Peter Volkov <pva@gentoo.org>
Cc: stable@kernel.org (2.6.31)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use sizeof(*) instead of sizeof * (See Codingstyle documentation).
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Fix printk format warning:
drivers/watchdog/wdt_pci.c:652: warning: format '%04x' expects type 'unsigned int', but argument 2 has type 'resource_size_t'

and then use resource_size_t for the "io" variable as well
so that it won't be truncated.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use pci_request_region instead of request_region for this pci_driver.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Fix error handling in the probe function.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Tested-by: Florian Fainelli <florian@openwrt.org>

This patch converts the ar7_wdt driver to become
a platform driver. The AR7 SoC specific identification
and base register calculation is performed by the board
code, therefore we no longer need to have access to
ar7_chip_id. We also remove the reboot notifier code to
use the platform shutdown method as Wim suggested.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

The WDIOC_SETTIMEOUT argument is supposed to be a "seconds" value.
However, the book E wdt currently treats it as a "period" which is
interpreted in a board-specific way.

This patch allows the user to pass in a "seconds" value and the driver
will set the smallest timeout that is at least as large as specified
by the user.  It's been tested on e500 hardware and works as
expected.

The patch only modifies the CONFIG_FSL_BOOKE case, the CONFIG_4xx case
is left unmodified as I don't have any hardware to test it on.
Signed-off-by: Chris Friesen <cfriesen@nortel.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Remove use of CLOCK_TICK_RATE in favor of using clock framework
for getting timer frequency.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

I saw Julia Lawalls various commits fixing up the use of rounding
macros and since my already submitted patch was not caught in this
I took it upon myself to fix it up for this driver as well.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

The WM831x series of devices provide a watchdog with configurable
behaviour on timer expiry.

Currently this driver support refreshes via a register or GPIO line and
autonomous refreshes from a hardware source (eg, a clock).
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Add watchdog device driver for the Nuvoton NUC900 series SoCs.
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Add support for watchdog found on SBC-FITPC2 board.
Signed-off-by: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (21 commits)
  x86, mce: Fix compilation with !CONFIG_DEBUG_FS in mce-severity.c
  x86, mce: CE in last bank prevents panic by unknown MCE
  x86, mce: Fake panic support for MCE testing
  x86, mce: Move debugfs mce dir creating to mce.c
  x86, mce: Support specifying raise mode for software MCE injection
  x86, mce: Support specifying context for software mce injection
  x86, mce: fix reporting of Thermal Monitoring mechanism enabled
  x86, mce: remove never executed code
  x86, mce: add missing __cpuinit tags
  x86, mce: fix "mce" boot option handling for CONFIG_X86_NEW_MCE
  x86, mce: don't log boot MCEs on Pentium M (model == 13) CPUs
  x86: mce: Lower maximum number of banks to architecture limit
  x86: mce: macros to compute banks MSRs
  x86: mce: Move per bank data in a single datastructure
  x86: mce: Move code in mce.c
  x86: mce: Rename CONFIG_X86_NEW_MCE to CONFIG_X86_MCE
  x86: mce: Remove old i386 machine check code
  x86: mce: Update X86_MCE description in x86/Kconfig
  x86: mce: Make CONFIG_X86_ANCIENT_MCE dependent on CONFIG_X86_MCE
  x86, mce: use atomic_inc_return() instead of add by 1
  ...

Manually fixed up trivial conflicts:
	Documentation/feature-removal-schedule.txt
	arch/x86/kernel/cpu/mcheck/mce.c

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits)
  sched: Fix SD_POWERSAVING_BALANCE|SD_PREFER_LOCAL vs SD_WAKE_AFFINE
  sched: Stop buddies from hogging the system
  sched: Add new wakeup preemption mode: WAKEUP_RUNNING
  sched: Fix TASK_WAKING & loadaverage breakage
  sched: Disable wakeup balancing
  sched: Rename flags to wake_flags
  sched: Clean up the load_idx selection in select_task_rq_fair
  sched: Optimize cgroup vs wakeup a bit
  sched: x86: Name old_perf in a unique way
  sched: Implement a gentler fair-sleepers feature
  sched: Add SD_PREFER_LOCAL
  sched: Add a few SYNC hint knobs to play with
  sched: Fix sync wakeups again
  sched: Add WF_FORK
  sched: Rename sync arguments
  sched: Rename select_task_rq() argument
  sched: Feature to disable APERF/MPERF cpu_power
  x86: sched: Provide arch implementations using aperf/mperf
  x86: Add generic aperf/mperf code
  x86: Move APERF/MPERF into a X86_FEATURE
  ...

Fix up trivial conflict in arch/x86/include/asm/processor.h due to
nearby addition of amd_get_nb_id() declaration from the EDAC merge.

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, pat: don't use rb-tree based lookup in reserve_memtype()
  x86: Increase MIN_GAP to include randomized stack