- 21 Sep, 2019 40 commits
-
-
Thomas Gleixner authored
[ Upstream commit 3e5bedc2 ] Rahul Tanwar reported the following bug on DT systems: > 'ioapic_dynirq_base' contains the virtual IRQ base number. Presently, it is > updated to the end of hardware IRQ numbers but this is done only when IOAPIC > configuration type is IOAPIC_DOMAIN_LEGACY or IOAPIC_DOMAIN_STRICT. There is > a third type IOAPIC_DOMAIN_DYNAMIC which applies when IOAPIC configuration > comes from devicetree. > > See dtb_add_ioapic() in arch/x86/kernel/devicetree.c > > In case of IOAPIC_DOMAIN_DYNAMIC (DT/OF based system), 'ioapic_dynirq_base' > remains to zero initialized value. This means that for OF based systems, > virtual IRQ base will get set to zero. Such systems will very likely not even boot. For DT enabled machines ioapic_dynirq_base is irrelevant and not updated, so simply map the IRQ base 1:1 instead. Reported-by:
Rahul Tanwar <rahul.tanwar@linux.intel.com> Tested-by:
Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: alan@linux.intel.com Cc: bp@alien8.de Cc: cheol.yong.kim@intel.com Cc: qi-ming.wu@intel.com Cc: rahul.tanwar@intel.com Cc: rppt@linux.ibm.com Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/20190821081330.1187-1-rahul.tanwar@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Prashant Malani authored
[ Upstream commit f53a7ad1 ] get_registers() blindly copies the memory written to by the usb_control_msg() call even if the underlying urb failed. This could lead to junk register values being read by the driver, since some indirect callers of get_registers() ignore the return values. One example is: ocp_read_dword() ignores the return value of generic_ocp_read(), which calls get_registers(). So, emulate PCI "Master Abort" behavior by setting the buffer to all 0xFFs when usb_control_msg() fails. This patch is copied from the r8152 driver (v2.12.0) published by Realtek (www.realtek.com). Signed-off-by:
Prashant Malani <pmalani@chromium.org> Acked-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ilya Leoshkevich authored
[ Upstream commit 2c238177 ] test_select_reuseport fails on s390 due to verifier rejecting test_select_reuseport_kern.o with the following message: ; data_check.eth_protocol = reuse_md->eth_protocol; 18: (69) r1 = *(u16 *)(r6 +22) invalid bpf_context access off=22 size=2 This is because on big-endian machines casts from __u32 to __u16 are generated by referencing the respective variable as __u16 with an offset of 2 (as opposed to 0 on little-endian machines). The verifier already has all the infrastructure in place to allow such accesses, it's just that they are not explicitly enabled for eth_protocol field. Enable them for eth_protocol field by using bpf_ctx_range instead of offsetof. Ditto for ip_protocol, bind_inany and len, since they already allow narrowing, and the same problem can arise when working with them. Fixes: 2dbb9b9e ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT") Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 0ff0f15a ] Multiple batadv_ogm2_packet can be stored in an skbuff. The functions batadv_v_ogm_send_to_if() uses batadv_v_ogm_aggr_packet() to check if there is another additional batadv_ogm2_packet in the skb or not before they continue processing the packet. The length for such an OGM2 is BATADV_OGM2_HLEN + batadv_ogm2_packet->tvlv_len. The check must first check that at least BATADV_OGM2_HLEN bytes are available before it accesses tvlv_len (which is part of the header. Otherwise it might try read outside of the currently available skbuff to get the content of tvlv_len. Fixes: 9323158e ("batman-adv: OGMv2 - implement originators logic") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Doug Berger authored
[ Upstream commit c51bc12d ] A timing hazard exists when an early fork/exec thread begins exiting and sets its mm pointer to NULL while a separate core tries to update the section information. This commit ensures that the mm pointer is not NULL before setting its section parameters. The arguments provided by commit 11ce4b33 ("ARM: 8672/1: mm: remove tasklist locking from update_sections_early()") are equally valid for not requiring grabbing the task_lock around this check. Fixes: 08925c2f ("ARM: 8464/1: Update all mm structures with section adjustments") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Laura Abbott <labbott@redhat.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit de0e4fd2 ] If qed_mcp_send_drv_version() fails, no cleanup is executed, leading to memory leaks. To fix this issue, introduce the label 'err4' to perform the cleanup work before returning the error. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Acked-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
-
Ivan Khoronzhuk authored
[ Upstream commit fb89c394 ] Fix mem leak caused by missed unpin routine for umem pages. Fixes: 8aef7340 ("xsk: introduce xdp_umem_page") Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Acked-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
Kconfig: Fix the reference to the IDT77105 Phy driver in the description of ATM_NICSTAR_USE_IDT77105 [ Upstream commit cd9d4ff9 ] This should be IDT77105, not IDT77015. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 17d8c5d1 ] Initialise the result count to 0 rather than initialising it to the argument count. The reason is that we want to ensure we record the I/O stats correctly in the case where an error is returned (for instance in the layoutstats). Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 9821421a ] If the file turns out to be of the wrong type after opening, we want to revalidate the path and retry, so return EOPENSTALE rather than ESTALE. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 90cf500e ] Currently, we are translating RPC level errors such as timeouts, as well as interrupts etc into EOPENSTALE, which forces a single replay of the open attempt. What we actually want to do is force the replay only in the cases where the returned error indicates that the file may have changed on the server. So the fix is to spell out the exact set of errors where we want to return EOPENSTALE. Signed-off-by:
-
Juliana Rodrigueiro authored
[ Upstream commit 89a26cd4 ] When running a 64-bit kernel with a 32-bit iptables binary, the size of the xt_nfacct_match_info struct diverges. kernel: sizeof(struct xt_nfacct_match_info) : 40 iptables: sizeof(struct xt_nfacct_match_info)) : 36 Trying to append nfacct related rules results in an unhelpful message. Although it is suggested to look for more information in dmesg, nothing can be found there. # iptables -A <chain> -m nfacct --nfacct-name <acct-object> iptables: Invalid argument. Run `dmesg' for more information. This patch fixes the memory misalignment by enforcing 8-byte alignment within the struct's first revision. This solution is often used in many other uapi netfilter headers. Signed-off-by:
Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 14c41586 ] The netlink attribute policy for NFTA_FLOW_TABLE_NAME is missing. Fixes: a3c90f7a ("netfilter: nf_tables: flow offload expression") Signed-off-by:
-
Todd Seidelmann authored
[ Upstream commit f20faa06 ] The ordering of arguments to the x_tables ADD_COUNTER macro appears to be wrong in ebtables (cf. ip_tables.c, ip6_tables.c, and arp_tables.c). This causes data corruption in the ebtables userspace tools because they get incorrect packet & byte counts from the kernel. Fixes: d72133e6 ("netfilter: ebtables: use ADD_COUNTER macro") Signed-off-by:
Todd Seidelmann <tseidelmann@linode.com> Signed-off-by:
-
Phil Reid authored
[ Upstream commit dec43da4 ] Currently the driver does not handle EPROBE_DEFER for the confd gpio. Use devm_gpiod_get_optional() instead of devm_gpiod_get() and return error codes from altera_ps_probe(). Fixes: 5692fae0 ("fpga manager: Add altera-ps-spi driver for Altera FPGAs") Signed-off-by:
Phil Reid <preid@electromag.com.au> Signed-off-by:
Moritz Fischer <mdf@kernel.org> Signed-off-by:
-
Quentin Monnet authored
[ Upstream commit d34b0440 ] When showing metadata about a single program by invoking "bpftool prog show PROG", the file descriptor referring to the program is not closed before returning from the function. Let's close it. Fixes: 71bb428f ("tools: bpf: add bpftool") Signed-off-by:
Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by:
Andrii Nakryiko <andriin@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Ilya Leoshkevich authored
[ Upstream commit 27df5c70 ] "bind4 allow specific IP & port" and "bind6 deny specific IP & port" fail on s390 because of endianness issue: the 4 IP address bytes are loaded as a word and compared with a constant, but the value of this constant should be different on big- and little- endian machines, which is not the case right now. Use __bpf_constant_ntohl to generate proper value based on machine endianness. Fixes: 1d436885 ("selftests/bpf: Selftest for sys_bind post-hooks.") Signed-off-by:
-
Ilya Leoshkevich authored
[ Upstream commit 91b4db53 ] "p runtime/jit: pass > 32bit index to tail_call" fails when bpf_jit_enable=1, because the tail call is not executed. This in turn is because the generated code assumes index is 64-bit, while it must be 32-bit, and as a result prog array bounds check fails, while it should pass. Even if bounds check would have passed, the code that follows uses 64-bit index to compute prog array offset. Fix by using clrj instead of clgrj for comparing index with array size, and also by using llgfr for truncating index to 32 bits before using it to compute prog array offset. Fixes: 6651ee07 ("s390/bpf: implement bpf_tail_call() helper") Reported-by:
Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Acked-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Suman Anna authored
[ Upstream commit a304f483 ] The clocks are not yet parsed and prepared until after a successful sysc_get_clocks(), so there is no need to unprepare the clocks upon any failure of any of the prior functions in sysc_probe(). The current code path would have been a no-op because of the clock validity checks within sysc_unprepare(), but let's just simplify the cleanup path by returning the error directly. While at this, also fix the cleanup path for a sysc_init_resets() failure which is executed after the clocks are prepared. Signed-off-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Janusz Krzysztofik authored
[ Upstream commit fa8397e4 ] Non-serio path of Amstrad Delta FIQ deferred handler depended on irq_ack() method provided by OMAP GPIO driver. That method has been removed by commit 693de831 ("gpio: omap: remove irq_ack method"). Remove useless code from the deferred handler and reimplement the missing operation inside the base FIQ handler. Should another dependency - irq_unmask() - be ever removed from the OMAP GPIO driver, WARN once if missing. Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by:
-
Faiz Abbas authored
[ Upstream commit 07f9a8be ] According to the latest am572x[1] and dra74x[2] data manuals, mmc3 default, hs, sdr12 and sdr25 modes use iodelay values given in MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is selected and correct iodelay values can be configured. [1] http://www.ti.com/lit/ds/symlink/am5728.pdf [2] http://www.ti.com/lit/ds/symlink/dra746.pdfSigned-off-by:
Faiz Abbas <faiz_abbas@ti.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 45da5e09 ] We have errata i688 workaround produce warnings on SoCs other than omap4 and omap5: omap4_sram_init:Unable to allocate sram needed to handle errata I688 omap4_sram_init:Unable to get sram pool needed to handle errata I688 This is happening because there is no ti,omap4-mpu node, or no SRAM to configure for the other SoCs, so let's remove the warning based on the SoC revision checks. As nobody has complained it seems that the other SoC variants do not need this workaround. Signed-off-by:
-
Ilya Leoshkevich authored
[ Upstream commit bb2d267c ] "masking, test in bounds 3" fails on s390, because BPF_ALU64_IMM(BPF_NEG, BPF_REG_2, 0) ignores the top 32 bits of BPF_REG_2. The reason is that JIT emits lcgfr instead of lcgr. The associated comment indicates that the code was intended to emit lcgr in the first place, it's just that the wrong opcode was used. Fix by using the correct opcode. Fixes: 05462310 ("s390/bpf: Add s390x eBPF JIT compiler backend") Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit e212abd4 ] We have cases where there are no softreset bits like with am335x lcdc. In that case ti,sysc-mask = <0> needs to be handled properly. Tested-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit afd58b16 ] TRM says PWMSS_SYSCONFIG bit for SOFTRESET changes to zero when reset is completed. Let's configure it as otherwise we get warnings on boot when we check the data against dts provided data. Eventually the legacy platform data will be just dropped, but let's fix the warning first. Reviewed-by:
-
Faiz Abbas authored
[ Upstream commit fb59ee37 ] If UHS speed modes are enabled, a compatible SD card switches down to 1.8V during enumeration. If after this a software reboot/crash takes place and on-chip ROM tries to enumerate the SD card, the difference in IO voltages (host @ 3.3V and card @ 1.8V) may end up damaging the card. The fix for this is to have support for power cycling the card in hardware (with a PORz/soft-reset line causing a power cycle of the card). Because the beaglebone X15 (rev A,B and C), am57xx-idks and am57xx-evms don't have this capability, disable voltage switching for these boards. The major effect of this is that the maximum supported speed mode is now high speed(50 MHz) down from SDR104(200 MHz). commit 88a74841 ("ARM: dts: am57xx-idk: Remove support for voltage switching for SD card") did this only for idk boards. Do it for all affected boards. Signed-off-by:
-
YueHaibing authored
[ Upstream commit de166bbe ] KASAN report this: kernel BUG at net/mac802154/main.c:130! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 0 PID: 19932 Comm: modprobe Not tainted 5.1.0-rc6+ #22 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ieee802154_free_hw+0x2a/0x30 [mac802154] Code: 55 48 8d 57 38 48 89 e5 53 48 89 fb 48 8b 47 38 48 39 c2 75 15 48 8d 7f 48 e8 82 85 16 e1 48 8b 7b 28 e8 f9 ef 83 e2 5b 5d c3 <0f> 0b 0f 1f 40 00 55 48 89 e5 53 48 89 fb 0f b6 86 80 00 00 00 88 RSP: 0018:ffffc90001c7b9f0 EFLAGS: 00010206 RAX: ffff88822df3aa80 RBX: ffff88823143d5c0 RCX: 0000000000000002 RDX: ffff88823143d5f8 RSI: ffff88822b1fabc0 RDI: ffff88823143d5c0 RBP: ffffc90001c7b9f8 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffff4 R13: ffff88822dea4f50 R14: ffff88823143d7c0 R15: 00000000fffffff4 FS: 00007ff52e999540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdc06dba768 CR3: 000000023160a000 CR4: 00000000000006f0 Call Trace: hwsim_add_one+0x2dd/0x540 [mac802154_hwsim] hwsim_probe+0x2f/0xb0 [mac802154_hwsim] platform_drv_probe+0x3a/0x90 ? driver_sysfs_add+0x79/0xb0 really_probe+0x1d4/0x2d0 driver_probe_device+0x50/0xf0 device_driver_attach+0x54/0x60 __driver_attach+0x7e/0xd0 ? device_driver_attach+0x60/0x60 bus_for_each_dev+0x68/0xc0 driver_attach+0x19/0x20 bus_add_driver+0x15e/0x200 driver_register+0x5b/0xf0 __platform_driver_register+0x31/0x40 hwsim_init_module+0x74/0x1000 [mac802154_hwsim] ? 0xffffffffa00e9000 do_one_initcall+0x6c/0x3cc ? kmem_cache_alloc_trace+0x248/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7ff52e4a2839 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffffa7b3c08 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 00005647560a2a00 RCX: 00007ff52e4a2839 RDX: 0000000000000000 RSI: 00005647547f3c2e RDI: 0000000000000003 RBP: 00005647547f3c2e R08: 0000000000000000 R09: 00005647560a2a00 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 00005647560a2c10 R14: 0000000000040000 R15: 00005647560a2a00 Modules linked in: mac802154_hwsim(+) mac802154 [last unloaded: mac802154_hwsim] In hwsim_add_one, if hwsim_subscribe_all_others fails, we should call ieee802154_unregister_hw to free resources. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: f25da51f ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Alexander Aring <aring@mojatatu.com> Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 1cbbbf39 ] KASAN report this: BUG: unable to handle kernel paging request at fffffbfff834f001 PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c968d067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 8871 Comm: syz-executor.0 Tainted: G C 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:strcmp+0x31/0xa0 lib/string.c:328 Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d RSP: 0018:ffff8881e0c57800 EFLAGS: 00010246 RAX: 1ffffffff834f001 RBX: ffffffffc1a78000 RCX: ffffffff827b9503 RDX: 0000000000000000 RSI: ffffffffc1a40008 RDI: ffffffffc1a78008 RBP: ffffffffc1a78009 R08: fffffbfff6a92195 R09: fffffbfff6a92195 R10: ffff8881e0c578b8 R11: fffffbfff6a92194 R12: ffffffffc1a40008 R13: dffffc0000000000 R14: ffffffffc1a3e470 R15: ffffffffc1a40000 FS: 00007fdcc02ff700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff834f001 CR3: 00000001b3134003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: genl_family_find_byname+0x7f/0xf0 net/netlink/genetlink.c:104 genl_register_family+0x1e1/0x1070 net/netlink/genetlink.c:333 ? 0xffffffffc1978000 hwsim_init_module+0x6a/0x1000 [mac802154_hwsim] ? 0xffffffffc1978000 ? 0xffffffffc1978000 ? 0xffffffffc1978000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdcc02fec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003 RBP: 00007fdcc02fec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fdcc02ff6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: mac802154_hwsim(+) mac802154 ieee802154 speakup(C) rc_proteus_2309 rtc_rk808 streebog_generic rds vboxguest madera_spi madera da9052_wdt mISDN_core ueagle_atm usbatm atm ir_imon_decoder scsi_transport_sas rc_dntv_live_dvb_t panel_samsung_s6d16d0 drm drm_panel_orientation_quirks lib80211 fb_agm1264k_fl(C) gspca_pac7302 gspca_main videobuf2_v4l2 soundwire_intel_init i2c_dln2 dln2 usbcore hid_gaff 88pm8607 nfnetlink axp20x_i2c axp20x uio pata_marvell pmbus_core snd_sonicvibes gameport snd_pcm snd_opl3_lib snd_timer snd_hwdep snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore rtc_ds1511 rtc_ds1742 vsock dwc_xlgmac rtc_rx8010 libphy twofish_x86_64_3way twofish_x86_64 twofish_common ad5696_i2c ad5686 lp8788_charger cxd2880_spi dvb_core videobuf2_common videodev media videobuf2_vmalloc videobuf2_memops fbtft(C) sysimgblt sysfillrect syscopyarea fb_sys_fops janz_ican3 firewire_net firewire_core crc_itu_t spi_slave_system_control i2c_matroxfb i2c_algo_bit matroxfb_base fb fbdev matroxfb_DAC1064 matroxfb_accel cfbcopyarea cfbimgblt cfbfillrect matroxfb_Ti3026 matroxfb_g450 g450_pll matroxfb_misc leds_blinkm ti_dac7311 intel_spi_pci intel_spi spi_nor hid_elan hid async_tx rc_cinergy_1400 rc_core intel_ishtp kxcjk_1013 industrialio_triggered_buffer kfifo_buf can_dev intel_th spi_pxa2xx_platform pata_artop vme_ca91cx42 gb_gbphy(C) greybus(C) industrialio mptbase st_drv cmac ttpci_eeprom via_wdt gpio_xra1403 mtd iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 input_leds crypto_simd cryptd glue_helper ide_pci_generic piix psmouse ide_core serio_raw ata_generic i2c_piix4 pata_acpi parport_pc parport floppy rtc_cmos intel_agp intel_gtt agpgart sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: speakup] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff834f001 ---[ end trace 5aa772c793e0e971 ]--- RIP: 0010:strcmp+0x31/0xa0 lib/string.c:328 Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d RSP: 0018:ffff8881e0c57800 EFLAGS: 00010246 RAX: 1ffffffff834f001 RBX: ffffffffc1a78000 RCX: ffffffff827b9503 RDX: 0000000000000000 RSI: ffffffffc1a40008 RDI: ffffffffc1a78008 RBP: ffffffffc1a78009 R08: fffffbfff6a92195 R09: fffffbfff6a92195 R10: ffff8881e0c578b8 R11: fffffbfff6a92194 R12: ffffffffc1a40008 R13: dffffc0000000000 R14: ffffffffc1a3e470 R15: ffffffffc1a40000 FS: 00007fdcc02ff700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff834f001 CR3: 00000001b3134003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 The error handing path misplace the cleanup in hwsim_init_module, switch the two cleanup functions to fix above issues. Reported-by:
-
Masashi Honma authored
commit 4b2c5a14 upstream. commit 1222a160 ("nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds") was incomplete and requires one more fix to prevent accessing to rssi_thresholds[n] because user can control rssi_thresholds[i] values to make i reach to n. For example, rssi_thresholds = {-400, -300, -200, -100} when last is -34. Cc: stable@vger.kernel.org Fixes: 1222a160 ("nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Masashi Honma <masashi.honma@gmail.com> Link: https://lore.kernel.org/r/20190908005653.17433-1-masashi.honma@gmail.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wen Huang authored
commit 7caac62e upstream. mwifiex_update_vs_ie(),mwifiex_set_uap_rates() and mwifiex_set_wmm_params() call memcpy() without checking the destination size.Since the source is given from user-space, this may trigger a heap buffer overflow. Fix them by putting the length check before performing memcpy(). This fix addresses CVE-2019-14814,CVE-2019-14815,CVE-2019-14816. Signed-off-by:
Wen Huang <huangwenabc@gmail.com> Acked-by:
Ganapathi Bhat <gbhat@marvell.comg> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Razvan Stefanescu authored
commit d2ace81b upstream. When half-duplex RS485 communication is used, after RX is started, TX tasklet still needs to be scheduled tasklet. This avoids console freezing when more data is to be transmitted, if the serial communication is not closed. Fixes: 69646d7a ("tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped") Signed-off-by:
Razvan Stefanescu <razvan.stefanescu@microchip.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190813074025.16218-1-razvan.stefanescu@microchip.comSigned-off-by:
-
Chunyan Zhang authored
commit 9c801e31 upstream. The sequence of arguments which was passed to handle_lsr_errors() didn't match the parameters defined in that function, &lsr was passed to flag and &flag was passed to lsr, this patch fixed that. Fixes: b7396a38 ("tty/serial: Add Spreadtrum sc9836-uart driver support") Signed-off-by:
Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by:
Chunyan Zhang <zhang.lyra@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190905074151.5268-1-zhang.lyra@gmail.comSigned-off-by:
-
Hung-Te Lin authored
commit 4b708b7b upstream. The VPD implementation from Chromium Vital Product Data project used to parse data from untrusted input without checking if the meta data is invalid or corrupted. For example, the size from decoded content may be negative value, or larger than whole input buffer. Such invalid data may cause buffer overflow. To fix that, the size parameters passed to vpd_decode functions should be changed to unsigned integer (u32) type, and the parsing of entry header should be refactored so every size field is correctly verified before starting to decode. Fixes: ad2ac9d5 ("firmware: Google VPD: import lib_vpd source files") Signed-off-by:
Hung-Te Lin <hungte@chromium.org> Cc: stable <stable@vger.kernel.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190830022402.214442-1-hungte@chromium.orgSigned-off-by:
-
Matt Delco authored
commit b60fe990 upstream. The first/last indexes are typically shared with a user app. The app can change the 'last' index that the kernel uses to store the next result. This change sanity checks the index before using it for writing to a potentially arbitrary address. This fixes CVE-2019-14821. Cc: stable@vger.kernel.org Fixes: 5f94c174 ("KVM: Add coalesced MMIO support (common part)") Signed-off-by:
Matt Delco <delco@chromium.org> Signed-off-by:
Jim Mattson <jmattson@google.com> Reported-by: syzbot+983c866c3dd6efa3662a@syzkaller.appspotmail.com [Use READ_ONCE. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 6efb971b ] When tcf_block_get() fails in sfb_init(), q->qdisc is still a NULL pointer which leads to a crash in sfb_destroy(). Similar for sch_dsmark. Instead of fixing each separately, Linus suggested to just accept NULL pointer in qdisc_put(), which would make callers easier. (For sch_dsmark, the bug probably exists long before commit 6529eaba.) Fixes: 6529eaba ("net: sched: introduce tcf block infractructure") Reported-by: syzbot+d5870a903591faaca4ae@syzkaller.appspotmail.com Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Dongli Zhang authored
[ Upstream commit 00b36850 ] When skb_shinfo(skb) is not able to cache extra fragment (that is, skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS), xennet_fill_frags() assumes the sk_buff_head list is already empty. As a result, cons is increased only by 1 and returns to error handling path in xennet_poll(). However, if the sk_buff_head list is not empty, queue->rx.rsp_cons may be set incorrectly. That is, queue->rx.rsp_cons would point to the rx ring buffer entries whose queue->rx_skbs[i] and queue->grant_rx_ref[i] are already cleared to NULL. This leads to NULL pointer access in the next iteration to process rx ring buffer entries. Below is how xennet_poll() does error handling. All remaining entries in tmpq are accounted to queue->rx.rsp_cons without assuming how many outstanding skbs are remained in the list. 985 static int xennet_poll(struct napi_struct *napi, int budget) ... ... 1032 if (unlikely(xennet_set_skb_gso(skb, gso))) { 1033 __skb_queue_head(&tmpq, skb); 1034 queue->rx.rsp_cons += skb_queue_len(&tmpq); 1035 goto err; 1036 } It is better to always have the error handling in the same way. Fixes: ad4f15dc ("xen/netfront: don't bug in case of too many frags") Signed-off-by:
Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit acdcecc6 ] UDP reuseport groups can hold a mix unconnected and connected sockets. Ensure that connections only receive all traffic to their 4-tuple. Fast reuseport returns on the first reuseport match on the assumption that all matches are equal. Only if connections are present, return to the previous behavior of scoring all sockets. Record if connections are present and if so (1) treat such connected sockets as an independent match from the group, (2) only return 2-tuple matches from reuseport and (3) do not return on the first 2-tuple reuseport match to allow for a higher scoring match later. New field has_conns is set without locks. No other fields in the bitmap are modified at runtime and the field is only ever set unconditionally, so an RMW cannot miss a change. Fixes: e32ea7e7 ("soreuseport: fast reuseport UDP socket selection") Link: http://lkml.kernel.org/r/CA+FuTSfRP09aJNYRt04SS6qj22ViiOEWaWmLAwX0psk8-PGNxw@mail.gmail.comSigned-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Craig Gallek <kraig@google.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 28e48603 ] In ip6erspan_tunnel_xmit(), if the skb will not be sent out, it has to be freed on the tx_err path. Otherwise when deleting a netns, it would cause dst/dev to leak, and dmesg shows: unregister_netdevice: waiting for lo to become free. Usage count = 1 Fixes: ef7baf5e ("ip6_gre: add ip6 erspan collect_md mode") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
William Tu <u9012063@gmail.com> Signed-off-by:
-
Yoshihiro Shimoda authored
commit e6839c31 upstream. The hardware manual should be revised, but the initial value of VBCTRL.OCCLREN is set to 1 actually. If the bit is set, the hardware clears VBCTRL.VBOUT and ADPCTRL.DRVVBUS registers automatically when the hardware detects over-current signal from a USB power switch. However, since the hardware doesn't have any registers which indicates over-current, the driver cannot handle it at all. So, if "is_otg_channel" hardware detects over-current, since ADPCTRL.DRVVBUS register is cleared automatically, the channel cannot be used after that. To resolve this behavior, this patch sets the VBCTRL.OCCLREN to 0 to keep ADPCTRL.DRVVBUS even if the "is_otg_channel" hardware detects over-current. (We assume a USB power switch itself protects over-current and turns the VBUS off.) This patch is inspired by a BSP patch from Kazuya Mizuguchi. Fixes: 1114e2d3 ("phy: rcar-gen3-usb2: change the mode to OTG on the combined channel") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Sean Young authored
commit 699bf941 upstream. The usb_bulk_urb will kfree'd on disconnect, so ensure the pointer is set to NULL after each free. stop stream urb killing urb buffer free tm6000: got start feed request tm6000_start_feed tm6000: got start stream request tm6000_start_stream tm6000: pipe reset tm6000: got start feed request tm6000_start_feed tm6000: got start feed request tm6000_start_feed tm6000: got start feed request tm6000_start_feed tm6000: got start feed request tm6000_start_feed tm6000: IR URB failure: status: -71, length 0 xhci_hcd 0000:00:14.0: ERROR unknown event type 37 xhci_hcd 0000:00:14.0: ERROR unknown event type 37 tm6000: error tm6000_urb_received usb 1-2: USB disconnect, device number 5 tm6000: disconnecting tm6000 #0 ================================================================== BUG: KASAN: use-after-free in dvb_fini+0x75/0x140 [tm6000_dvb] Read of size 8 at addr ffff888241044060 by task kworker/2:0/22 CPU: 2 PID: 22 Comm: kworker/2:0 Tainted: G W 5.3.0-rc4+ #1 Hardware name: LENOVO 20KHCTO1WW/20KHCTO1WW, BIOS N23ET65W (1.40 ) 07/02/2019 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack+0x9a/0xf0 print_address_description.cold+0xae/0x34f __kasan_report.cold+0x75/0x93 ? tm6000_fillbuf+0x390/0x3c0 [tm6000_alsa] ? dvb_fini+0x75/0x140 [tm6000_dvb] kasan_report+0xe/0x12 dvb_fini+0x75/0x140 [tm6000_dvb] tm6000_close_extension+0x51/0x80 [tm6000] tm6000_usb_disconnect.cold+0xd4/0x105 [tm6000] usb_unbind_interface+0xe4/0x390 device_release_driver_internal+0x121/0x250 bus_remove_device+0x197/0x260 device_del+0x268/0x550 ? __device_links_no_driver+0xd0/0xd0 ? usb_remove_ep_devs+0x30/0x3b usb_disable_device+0x122/0x400 usb_disconnect+0x153/0x430 hub_event+0x800/0x1e40 ? trace_hardirqs_on_thunk+0x1a/0x20 ? hub_port_debounce+0x1f0/0x1f0 ? retint_kernel+0x10/0x10 ? lock_is_held_type+0xf1/0x130 ? hub_port_debounce+0x1f0/0x1f0 ? process_one_work+0x4ae/0xa00 process_one_work+0x4ba/0xa00 ? pwq_dec_nr_in_flight+0x160/0x160 ? do_raw_spin_lock+0x10a/0x1d0 worker_thread+0x7a/0x5c0 ? process_one_work+0xa00/0xa00 kthread+0x1d5/0x200 ? kthread_create_worker_on_cpu+0xd0/0xd0 ret_from_fork+0x3a/0x50 Allocated by task 2682: save_stack+0x1b/0x80 __kasan_kmalloc.constprop.0+0xc2/0xd0 usb_alloc_urb+0x28/0x60 tm6000_start_feed+0x10a/0x300 [tm6000_dvb] dmx_ts_feed_start_filtering+0x86/0x120 [dvb_core] dvb_dmxdev_start_feed+0x121/0x180 [dvb_core] dvb_dmxdev_filter_start+0xcb/0x540 [dvb_core] dvb_demux_do_ioctl+0x7ed/0x890 [dvb_core] dvb_usercopy+0x97/0x1f0 [dvb_core] dvb_demux_ioctl+0x11/0x20 [dvb_core] do_vfs_ioctl+0x5d8/0x9d0 ksys_ioctl+0x5e/0x90 __x64_sys_ioctl+0x3d/0x50 do_syscall_64+0x74/0xe0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 22: save_stack+0x1b/0x80 __kasan_slab_free+0x12c/0x170 kfree+0xfd/0x3a0 xhci_giveback_urb_in_irq+0xfe/0x230 xhci_td_cleanup+0x276/0x340 xhci_irq+0x1129/0x3720 __handle_irq_event_percpu+0x6e/0x420 handle_irq_event_percpu+0x6f/0x100 handle_irq_event+0x55/0x84 handle_edge_irq+0x108/0x3b0 handle_irq+0x2e/0x40 do_IRQ+0x83/0x1a0 Cc: stable@vger.kernel.org Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
