- 25 Jun, 2019 11 commits
-
-
Olof Johansson authored
Merge tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt This time we only have a single patch for our command branch between arm and arm64, a fix for the array syntax raised by our DT schemas. * tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sunxi: h3/h5: Fix GPIO regulator state array Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'sunxi-dt64-for-5.3-201906210808' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of arm64 DT changes, this time with: - Some fixes for the DT schemas that were added during this release - Wifi support for the H6 - LRADC suppport for the A64 - Some background work on A64 boards, to enable various devices such as touchscreens, PMIC, audio, wifi, etc. * tag 'sunxi-dt64-for-5.3-201906210808' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h6: Add DMA node arm64: dts: allwinner: a64: Add lradc node dt-bindings: input: sun4i-lradc-keys: Add A64 compatible arm64: dts: allwinner: h6: add r_watchog node arm64: dts: allwinner: h6: add watchdog node dt-bindings: watchdog: add Allwinner H6 watchdog arm64: dts: allwinner: a64: Enable audio on Teres-I arm64: dts: allwinner: a64: bananapi-m64: Enable PMIC USB power supply arm64: dts: allwinner: axp803: add USB power supply node arm64: dts: allwinner: a64: Add pinmux for RGB666 LCD arm64: dts: allwinner: a64: orangepi-win: Add wifi and bluetooth nodes arm64: dts: allwinner: h6: add PIO VCC bank supplies for Pine H64 arm64: dts: allwinner: a64-oceanic-5205-5inmfd: Enable GT911 CTP arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP node arm64: dts: allwinner: a64: move I2C pinctrl to dtsi Signed-off-by:
-
Olof Johansson authored
Merge tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches: - Some work on the BPi M2-Berry to support various devices - Convert some bindings to a schema, and a lot of fixes reported by the schemas we introduced. - A few other fixes here and there * tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits) dt-bindings: pwm: Convert Allwinner PWM to a schema ARM: dts: sun8i: r40: Change the RTC compatible ARM: dts: sun8i: v3s: Add external crystals accuracy ARM: dts: sun8i: v3s: Fix the RTC node ARM: dts: sun6i: Add external crystals accuracy ARM: dts: sun6i: Fix RTC node ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface) ARM: dts: gr8-evb: Fix RTC vendor ARM: dts: sun7i: icnova-swac: Fix the model vendor ARM: dts: sun8i: a711: Change LRADC node names to avoid warnings ARM: dts: sun7i: olimex-lime2: Enable ac and power supplies ARM: dts: sun6i: Add default address and size cells for SPI ARM: dts: sun8i-h3: Fix wifi in Beelink X2 DT dt-bindings: bus: Convert Allwinner RSB to a schema ARM: dts: sun8i: r40: bananapi-m2-ultra: Remove regulator-always-on ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.3 - SPDX updates - switch to generic ethernet PHY reset bindings - add the canvas module - mxiii-plus board: add regulators * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: switch to the generic Ethernet PHY reset bindings ARM: dts: meson8b: update with SPDX Licence identifier ARM: dts: meson8b-odroidc1: update with SPDX Licence identifier ARM: dts: meson8b-mxq: update with SPDX Licence identifier ARM: dts: meson8: update with SPDX Licence identifier ARM: dts: meson8-minix-neo-x8: update with SPDX Licence identifier ARM: dts: meson6: update with SPDX Licence identifier ARM: dts: meson6-atv1200: update with SPDX Licence identifier ARM: dts: meson: update with SPDX Licence identifier ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805 ARM: dts: meson8m2: mxiii-plus: add the supply for the Mali GPU ARM: dts: meson8m2: mxiii-plus: rename the DCDC2 regulator ARM: dts: meson8b: add the canvas module ARM: dts: meson8m2: update the offset of the canvas module ARM: dts: meson8: add the canvas module Signed-off-by:
-
Olof Johansson authored
Merge tag 'davinci-for-v5.3/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/dt This pull request adds CPUFreq support for DA850 boards in device-tree boot using the generic CPUFREQ_DT driver. * tag 'davinci-for-v5.3/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: Enable CPUFREQ_DT ARM: dts: da850-evm: enable cpufreq ARM: dts: da850-lcdk: enable cpufreq ARM: dts: da850-lego-ev3: enable cpufreq ARM: dts: da850: add cpu node and operating points to DT Signed-off-by:
-
Olof Johansson authored
Merge tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.3 We have various device tree updates from the OpenBMC project to enable bits and pieces in existing systems, notably updates to Google's Zaius. There are some AST2500 machines under development: * Lenovo Hr630 * IBM Swift * Facebook YAMP And some AST2400 machines that have been around but out of tree and have now joined the party: * YADRO VESNIN * Microsoft Olympus * tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Enable video engine on romulus and wtherspoon ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine ARM: dts: aspeed: Add YADRO VESNIN BMC ARM: dts: aspeed: Add Microsoft Olympus BMC ARM: dts: aspeed: Adding Lenovo Hr630 BMC ARM: dts: aspeed: Add Facebook YAMP BMC ARM: dts: aspeed: swift: Add pca9539 devices ARM: dts: aspeed: Add Swift BMC machine ARM: dts: aspeed: cmm: enable ehci host controllers ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots ARM: dts: aspeed: zaius: update 12V brick I2C address ARM: dts: aspeed: zaius: add Infineon and Intersil regulators ARM: dts: aspeed: quanta-q71: Enable p2a node ARM: dts: aspeed: Add aspeed-p2a-ctrl node ARM: dts: aspeed: Add Power9 and Power9 CFAM description ARM: dts: aspeed: Rename flash-controller nodes Signed-off-by:
-
Olof Johansson authored
Merge tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm Device Tree Changes for v5.3 * Add display support to MSM8974 * Add display, backlight, and touchscreen support to MSM8974 Hammerhead * Update coresight bindings for MSM8974 and APQ8064 * tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: msm8974-hammerhead: add support for display ARM: dts: msm8974: add display support ARM: dts: qcom: msm8974-hammerhead: add support for backlight ARM: dts: qcom: msm8974-hammerhead: add touchscreen support ARM: dts: qcom-msm8974: Update coresight DT bindings ARM: dts: qcom-apq8064: Update coresight DT bindings Signed-off-by:
-
Olof Johansson authored
Merge tag 'qcom-arm64-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 Updates for v5.3 * Switch to use second gen PON on PM8998 * Add PSCI cupidle states for MSM8996, MSM8998,and SDM845 * Add MSM8996 UFS phy reset controller * Add propre cpu capacity scaling on MSM8996 * Fixups for APR domain, legacy clocks, and PSCI entry latency on MSM8996 * Enable SMMUs on MSM8996 * Add Dragonboard 845C * Add Q6V5, GPU, GMU, and AOSS QMP node on SDM845 * Fixup CPU topology on SDM845 * Change USB1 to be peripheral on SDM845 MTP * Add PCIe Phy, RC nodes, ANOC1 SMMU, and RPMPD node on MSM8998 * Update coresight bindings for MSM8916 * Update idle state names and entry-method on MSM8916 * Add PCIe, RPMPD, LPASS, Q6, TCSR, TuringCC, PSCI cpuidle states, and CDSP on QCS404 * Add reset-cells property to QCS404 GCC node * Fixup s3 max voltage, l3 min voltage, drive strength typo, and s3 supply definition on QCS404-evb * Fixup ADC outputs and VADC calibration on PMS405 * tag 'qcom-arm64-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (39 commits) arm64: dts: qcom: qcs404-evb: fix vdd_apc supply arm64: dts: qcom: pm8998: Use qcom,pm8998-pon binding for second gen pon arm64: dts: qcom: msm8996: Enable SMMUs arm64: dts: qcom: msm8996: Correct apr-domain property arm64: dts: qcom: Add Dragonboard 845c arm64: dts: qcom: qcs404-evb: Enable PCIe arm64: dts: qcom: qcs404: Add PCIe related nodes arm64: dts: qcom: msm8998: Add PCIe PHY and RC nodes arm64: dts: qcom: msm8998: Add ANOC1 SMMU node arm64: dts: qcom: msm8996: Stop using legacy clock names arm64: dts: msm8996: fix PSCI entry-latency-us arm64: dts: qcom: msm8998: Add PSCI cpuidle low power states arm64: dts: qcom: sdm845: Add Q6V5 MSS node arm64: dts: qcom: Add AOSS QMP node arm64: dts: qcom-qcs404: Add reset-cells to GCC node arm64: dts: qcom-msm8916: Update coresight DT bindings arm64: dts: qcom: msm8998: Add rpmpd node arm64: dts: qcom: qcs404: Add rpmpd node arm64: dts: qcom: qcs404: Move lpass and q6 into soc arm64: dts: qcom: qcs404: Fully describe the CDSP ... Signed-off-by:
-
git://github.com/hisilicon/linux-hisiOlof Johansson authored
ARM: DT: Hisilicon ARM32 SoCs updates for v5.3 - Updated CoreSight funnel and replicator using new bindings to fix warning for the hip04. * tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi: ARM: dts: hip04: Update coresight DT bindings Signed-off-by:
-
git://github.com/hisilicon/linux-hisiOlof Johansson authored
ARM64: DT: Hisilicon SoCs DT updates for v5.3 * Hi3660 SoC and related boards: - Added CoreSight trace components * Hi6220 SoC and related boards: - Updated CoreSight funnel and replicator using new bindings to fix warning * tag 'hisi-arm64-dt-for-5.3' of git://github.com/hisilicon/linux-hisi: arm64: dts: hi3660: Add CoreSight support arm64: dts: hi6220: Update coresight DT bindings Signed-off-by:
-
https://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contain Broadcom ARM-based SoCs Device Tree changes for 5.3 please pull the following: - Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI controller - Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files and provides a fix for devices failing to boot after the removal of skelton.dtsi (that commit has been submitted as a separate fix) * tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux: ARM: dts: BCM5301X: Fix most DTC W=1 warnings ARM: dts: NSP: Fix the bulk of W=1 DTC warnings ARM: dts: BCM63xx: Fix DTC W=1 warnings ARM: dts: BCM53573: Fix DTC W=1 warnings ARM: dts: bcm-mobile: Fix most DTC W=1 warnings ARM: dts: Cygnus: Fix most DTC W=1 warnings ARM: dts: Fix BCM7445 DTC warnings ARM: bcm283x: Enable DMA support for SPI controller ARM: dts: bcm: Add missing device_type = "memory" property Signed-off-by:
-
- 23 Jun, 2019 9 commits
-
-
Florian Fainelli authored
Fix the bulk of the unit_address_vs_reg warnings and unnecessary \#address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by:Florian Fainelli <f.fainelli@gmail.com>
-
Florian Fainelli authored
Fix the bulk of the unit_address_vs_reg warnings and unnecessary \#address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: -
Florian Fainelli authored
Fix the bulk of the unit_address_vs_reg warnings and unnecessary \#address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: -
Florian Fainelli authored
Fix the the unit_address_vs_reg warnings and unnecessary \#address-cells/#size-cells without "ranges" or child "reg" property warnings. Signed-off-by: -
Florian Fainelli authored
Fix the bulk of the unit_address_vs_reg warnings and unnecessary \#address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: -
Florian Fainelli authored
Fix the bulk of the unit_address_vs_reg warnings and unnecessary \#address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: -
Florian Fainelli authored
Fixes a number of unit_address_vs_reg warnings: DTC arch/arm/boot/dts/bcm7445-bcm97445svmb.dtb arch/arm/boot/dts/bcm7445.dtsi:66.6-225.4: Warning (unit_address_vs_reg): /rdb: node has a reg or ranges property, but no unit name arch/arm/boot/dts/bcm7445.dtsi:227.21-298.4: Warning (unit_address_vs_reg): /memory_controllers: node has a reg or ranges property, but no unit name arch/arm/boot/dts/bcm7445-bcm97445svmb.dts:9.9-14.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name arch/arm/boot/dts/bcm7445.dtsi:255.10-275.5: Warning (simple_bus_reg): /memory_controllers/memc@1: simple-bus unit address format error, expected "80000" arch/arm/boot/dts/bcm7445.dtsi:277.10-297.5: Warning (simple_bus_reg): /memory_controllers/memc@2: simple-bus unit address format error, expected "100000" Signed-off-by: -
Florian Fainelli authored
This pull requests enables DMA support for the main SPI controller on all Raspberry Pis. Signed-off-by: -
Lukas Wunner authored
Without this, the driver for the BCM2835 SPI controller uses interrupt mode instead of DMA mode, incurring a significant performance penalty. The Foundation's device tree has had these attributes for years, but for some reason they were never upstreamed. They were originally contributed by Noralf Trønnes and Martin Sperl: https://github.com/raspberrypi/linux/commit/25f3e064afc8 https://github.com/raspberrypi/linux/commit/e0edb52b47e6 The DREQ numbers 6 and 7 are documented in section 4.2.1.3 of: https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdfTested-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Reviewed-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
Martin Sperl <kernel@martin.sperl.org> Signed-off-by:
Stefan Wahren <wahrenst@gmx.net> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org>
-
- 21 Jun, 2019 1 commit
-
-
Maxime Ripard authored
The Allwinner SoCs have a PWM controller supported in Linux, with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas. Signed-off-by:Maxime Ripard <maxime.ripard@bootlin.com>
-
- 20 Jun, 2019 4 commits
-
-
Martin Blumenstingl authored
The snps,reset-gpio bindings are deprecated in favour of the generic "Ethernet PHY reset" bindings. Replace snps,reset-gpio from the ðmac node with reset-gpios in the ethernet-phy node. The old snps,reset-active-low property is now encoded directly as GPIO flag inside the reset-gpios property. snps,reset-delays-us is converted to reset-assert-us and reset-deassert-us. reset-assert-us is the second cell from snps,reset-delays-us while reset-deassert-us was the third cell. Instead of blindly copying the old values (which seems strange since they gave the PHY one second to come out of reset) over this also updates the delays based on the datasheets: - RTL8211F PHY on the Odroid-C1 and MXIII-Plus needs a 10ms assert delay (the datasheet mentions: "For a complete PHY reset, this pin must be asserted low for at least 10ms") and a 30ms deassert delay (the datasheet mentions: "Wait for a further 30ms (for internal circuits settling time) before accessing the PHY register"). The old settings used 10ms for assert and 1000ms for deassert. - IP101GR PHY on the EC-100 and MXQ needs a 10ms assert delay (the datasheet mentions: "Trst | Reset period | 10ms") and a 10ms deassert delay as well (the datasheet mentions: "Tclk_MII_rdy | MII/RMII clock output ready after reset released | 10ms")). The old settings used 10ms for assert and 1000ms for deassert. No functional changes intended. Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com>
-
Eddie James authored
Enable the video engine and add it's optional reserved memory region. Use 32MB for the reserved memory since the video engine could need up to two 1920x1200@32bpp source buffers. Source buffers: 2 * 1920 * 1200 * 4 = 18432000 bytes In addition, the V4L2 subsystem will allocate any number of compression buffers, each at most 1/8th the size of the source buffer. Signed-off-by:
Eddie James <eajames@linux.ibm.com> Signed-off-by:
Joel Stanley <joel@jms.id.au>
-
John Wang authored
The fp5280g2 is an OpenPower server platform with an ASPEED AST2500 BMC. Signed-off-by:
John Wang <wangzqbj@inspur.com> Reviewed-by:
Lei YU <mine260309@gmail.com> Reviewed-by:
Andrew Jeffery <andrew@aj.id.au> Signed-off-by:
-
Jorge Ramirez-Ortiz authored
The invalid definition in the supply causes the Qualcomm's EVB-1000 and EVB-4000 not to boot. Fix the boot issue by correctly defining the supply: vdd_s3 (namely "vdd_apc") is actually connected to vph_pwr. Reported-by:
Niklas Cassel <niklas.cassel@linaro.org> Tested-by:
Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Andy Gross <agross@kernel.org>
-
- 19 Jun, 2019 15 commits
-
-
Olof Johansson authored
Merge tag 'ti-k3-soc-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt Texas Instruments K3 SoC family changes for 5.3 - Add support for the new J721e SoC, includes basic peripherals needed for booting up the device - New peripheral support added for AM654x: * TI SCI irqchip * GPIO * MCU SRAM * R5Fs * MSMC RAM * SERDES and PCIe * tag 'ti-k3-soc-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: (26 commits) arm64: dts: ti: k3-j721e: Add the MCU SRAM node arm64: dts: ti: k3-j721e: Add interrupt controllers in wakeup domain arm64: dts: ti: k3-j721e: Add interrupt controllers in main domain arm64: dts: ti: k3-j721e-main: Add Main NavSS Interrupt controller node arm64: defconfig: Enable TI's J721E SoC platform arm64: dts: ti: Add support for J721E Common Processor Board soc: ti: Add Support for J721E SoC config option arm64: dts: ti: Add Support for J721E SoC dt-bindings: serial: 8250_omap: Add compatible for J721E UART controller dt-bindings: arm: ti: Add bindings for J721E SoC arm64: dts: ti: am654-base-board: Disable SERDES and PCIe arm64: dts: k3-am6: Add PCIe Endpoint DT node arm64: dts: k3-am6: Add PCIe Root Complex DT node arm64: dts: k3-am6: Add SERDES DT node arm64: dts: k3-am6: Add mux-controller DT node required for muxing SERDES arm64: dts: k3-am6: Add "socionext,synquacer-pre-its" property to gic_its arm64: dts: ti: k3-am65: Add MSMC RAM ranges in interconnect node arm64: dts: ti: k3-am65: Add R5F ranges in interconnect nodes arm64: dts: ti: k3-am65-mcu: Add the MCU RAM node arm64: dts: ti: k3-am65: Add MCU SRAM ranges in interconnect nodes ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'socfpga_dts_updates_for_v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.3 - Use the new "altr,socfpga-stmmac-a10-s10" for the EMAC controllers on Arria10/Stratix10 - Add the ltc2497 i2c entry on the Arria10 devkit - Add the EMAC OCP reset property on the Arria10 * tag 'socfpga_dts_updates_for_v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: arria10: Add EMAC OCP reset property ARM: dts: socfpga: add ltc2497 on arria10 devkit arm64: dts: stratix10: use the "altr,socfpga-stmmac-a10-s10" binding ARM: dts: socfpga: use the "altr,socfpga-stmmac-a10-s10" binding Signed-off-by:
-
Leo Yan authored
CoreSight DT bindings have been updated, thus the old compatible strings are obsolete and the drivers will report warning if DTS uses these obsolete strings. This patch switches to the new bindings for CoreSight dynamic funnel and static replicator, so can dismiss warning during initialisation. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Leo Yan <leo.yan@linaro.org> Acked-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
Wei Xu <xuwei5@hisilicon.com>
-
Wanglai Shi authored
This patch adds DT bindings for the CoreSight trace components on hi3660, which is used by 96boards Hikey960. Signed-off-by:
Wanglai Shi <shiwanglai@hisilicon.com> Reviewed-and-tested-by:
-
Leo Yan authored
CoreSight DT bindings have been updated, thus the old compatible strings are obsolete and the drivers will report warning if DTS uses these obsolete strings. This patch switches to the new bindings for CoreSight dynamic funnel and static replicator, so can dismiss warning during initialisation. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
-
Olof Johansson authored
Merge tag 'samsung-dt-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.3 1. Fixes for minor warnings. 2. Enable ADC on Exynos5410 Odroid XU board. * tag 'samsung-dt-5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Add ADC node to Exynos5410 and Odroid XU ARM: dts: exynos: Raise maximum buck regulator voltages on Arndale Octa ARM: dts: exynos: Move CPU OPP tables out of SoC node on Exynos5420 Signed-off-by:
-
Olof Johansson authored
Merge tag 'vexpress-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt ARMv7 Vexpress updates for v5.3 1. Couple of updates switching to use new/updated bindings for CoreSight dynamic funnel components and NOR flash partition type 2. Disable NOR flash on Vexpress TC2 platform as it conflicts with CPU power management. This follows what we have on ARMv8 Juno platform and is required after recent commit that enabled CFI NOR FLASH in multi_v7 defconfig * tag 'vexpress-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: ARM: dts: vexpress: set the right partition type for NOR flash arm: dts: vexpress-v2p-ca15_a7: disable NOR flash node by default ARM: dts: vexpress-v2p-ca15_a7: update coresight DT bindings Signed-off-by:
-
Olof Johansson authored
Merge tag 'juno-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt ARMv8 Juno updates for v5.3 Couple of updates switching to use new/updated bindings for CoreSight dynamic funnel components and NOR flash partition type * tag 'juno-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: juno: set the right partition type for NOR flash arm64: dts: juno: update coresight DT bindings Signed-off-by:
-
Olof Johansson authored
Merge tag 'omap-for-v5.3/ti-sysc-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt ti-sysc dts changes for v5.3 We can now drop the custom dts property "ti,hwmods" for drivers that have the ti-sysc interconnect target module configured in dts. Let's start with a minimal changes to omap4 uart and mmc. We use omap4 as the starting point as it has runtime PM implemented and all the omap variants after that are based on it with similar clkctrl clock for the modules. More devices will be updated later on as they get tested. Note that these changes are based on the related ti-sysc driver changes. * tag 'omap-for-v5.3/ti-sysc-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits) ARM: dts: Drop legacy custom hwmods property for omap4 mmc ARM: dts: Drop legacy custom hwmods property for omap4 uart bus: ti-sysc: Detect uarts also on omap34xx bus: ti-sysc: Do rstctrl reset handling in two phases bus: ti-sysc: Add support for disabling module without legacy mode bus: ti-sysc: Set ENAWAKEUP if available bus: ti-sysc: Handle swsup idle mode quirks bus: ti-sysc: Handle clockactivity for enable and disable bus: ti-sysc: Enable interconnect target module autoidle bit on enable bus: ti-sysc: Allow QUIRK_LEGACY_IDLE even if legacy_mode is not set bus: ti-sysc: Make OCP reset work for sysstatus and sysconfig reset bits bus: ti-sysc: Support 16-bit writes too bus: ti-sysc: Add support for missing clockdomain handling ARM: dts: dra71x: Disable usb4_tm target module ARM: dts: dra71x: Disable rtc target module ARM: dts: dra76x: Disable usb4_tm target module ARM: dts: dra76x: Disable rtc target module ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values ARM: dts: am57xx-idk: Remove support for voltage switching for SD card bus: ti-sysc: Handle devices with no control registers ... Signed-off-by:
-
Olof Johansson authored
Merge tag 'omap-for-v5.3/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt dts changes for omap variants for v5.3 This series of changes improves support for few boards: - configure another lcd type for logicpd torpedo devkit - a series of updates for am335x phytec boards - configure mmc card detect pin for am335x-baltos * tag 'omap-for-v5.3/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-baltos: add support for MMC1 CD pin ARM: dts: am335x-baltos: Fix PHY mode for ethernet ARM: dts: Add support for phyBOARD-REGOR-AM335x ARM: dts: am335x-pcm-953: Remove eth phy delay ARM: dts: am335x-pcm-953: Update user led names ARM: dts: am335x-phycore-som: Enable gpmc node in dts files ARM: dts: am335x-phycore-som: Add emmc node ARM: dts: am335x phytec boards: Remove regulator node ARM: dts: Add LCD type 28 support to LogicPD Torpedo DM3730 devkit Signed-off-by:
-
https://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 5.3, please pull the following: - Pramod adds the Device Tree nodes for thermal support on Stingray - Srinath adds the Device Tree nodes for both XHCI (host) and BDC (device) modes - Rayagonda adds the Device Tree node for slave I2C operation when Stingray operates as a SmartNIC * tag 'arm-soc/for-5.3/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: Stingray: Add NIC i2c device node arm64: dts: Add USB DT nodes for Stingray SoC arm64: dts: stingray: Add Stingray Thermal DT support. Signed-off-by:
-
Olof Johansson authored
Merge tag 'v5.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt PCIe for rockpro64, wifi+bt for Rock-PI4, spi for Rock960 family and a fix for the yet unused isp-iommus. * tag 'v5.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: add WiFi+BT support on ROCK Pi4 board arm64: dts: rockchip: fix isp iommu clocks and power domain arm64: dts: rockchip: Enable SPI1 on Ficus arm64: dts: rockchip: Enable SPI0 and SPI4 on Rock960 arm64: dts: rockchip: add PCIe nodes on rk3399-rockpro64 Signed-off-by:
-
Olof Johansson authored
Merge tag 'v5.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt A lot more love for rk3288 in general and veyron specially with changes all over the place. * tag 'v5.3-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (21 commits) ARM: dts: rockchip: Split GPIO keys for veyron into multiple devices ARM: dts: rockchip: Add HDMI i2c unwedging for rk3288-veyron ARM: dts: rockchip: Add unwedge pinctrl entries for dw_hdmi on rk3288 ARM: dts: rockchip: Switch to builtin HDMI DDC bus on rk3288-veyron ARM: dts: rockchip: Add pin names for rk3288-veyron jaq, mickey, speedy ARM: dts: rockchip: fix pwm-cells for rk3288's pwm3 ARM: dts: rockchip: Configure the GPU thermal zone for mickey ARM: dts: rockchip: Use the GPU to cool CPU thermal zone of veyron mickey ARM: dts: rockchip: remove GPU 500 MHz OPP on rk3288 ARM: dts: rockchip: Use GPU as cooling device for the GPU thermal zone of the rk3288 ARM: dts: rockchip: Add #cooling-cells entry for rk3288 GPU ARM: dts: rockchip: Mark that the rk3288 timer might stop in suspend ARM: dts: rockchip: Add pin names for rk3288-veyron-jerry ARM: dts: rockchip: Add pin names for rk3288-veyron-minnie ARM: dts: raise GPU trip point temperature for speedy to 80 degC ARM: dts: rockchip: raise GPU trip point temperatures for veyron ARM: dts: rockchip: raise CPU trip point temperature for veyron to 100 degC ARM: dts: rockchip: Make rk3288-veyron-minnie run at hs200 ARM: dts: rockchip: Make rk3288-veyron-mickey's emmc work again ARM: dts: rockchip: Remove bogus 'i2s_clk_out' from rk3288-veyron-mickey ... Signed-off-by:
-
Andy Gross authored
This patch adds a reset-cells property to the gcc controller on the QCS404. Without this in place, we get warnings like the following if nodes reference a gcc reset: arch/arm64/boot/dts/qcom/qcs404.dtsi:261.38-310.5: Warning (resets_property): /soc@0/remoteproc@b00000: Missing property '#reset-cells' in node /soc@0/clock-controller@1800000 or bad phandle (referred from resets[0]) also defined at arch/arm64/boot/dts/qcom/qcs404-evb.dtsi:82.18-84.3 DTC arch/arm64/boot/dts/qcom/qcs404-evb-4000.dtb arch/arm64/boot/dts/qcom/qcs404.dtsi:261.38-310.5: Warning (resets_property): /soc@0/remoteproc@b00000: Missing property '#reset-cells' in node /soc@0/clock-controller@1800000 or bad phandle (referred from resets[0]) also defined at arch/arm64/boot/dts/qcom/qcs404-evb.dtsi:82.18-84.3 Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Baolin Wang authored
Add one Spreadtrum SD host controller to support eMMC card for Spreadtrum SC9860 platform. Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
-
