Merge tag 'socfpga_updates_for_v4.20_part3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

SoCFPGA DTS updates for v4.20, part 3
- Add ethernet aliases for Stratix10
- Move ethernet aliases from socfpga dtsi
- Correct system manager register size for Stratix10
- Correct SDRAM node address for Arria10

* tag 'socfpga_updates_for_v4.20_part3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: socfgpa: remove ethernet aliases from dtsi
  arm64: dts: stratix10: add ethernet aliases
  arm64: dts: stratix10: Correct System Manager register size
  ARM: dts: socfpga: Fix SDRAM node address for Arria10
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt64-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Samsung DTS ARM64 changes for v4.20

1. Use graph between USB-PHY and MUIC.
2. Cleanup of SD card detect pin level.

* tag 'samsung-dt64-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: ARM: dts: exynos: Remove double SD card detect pin inversion on TM2
  arm64: dts: exynos: Add OF graph between USB-PHY and MUIC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Samsung DTS ARM changes for v4.20, second round

Add proper configuration for Odroid XU SD write-protect pin.

* tag 'samsung-dt-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Add pin configuration for SD write protect on Odroid XU
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Not all boards use two ethernet devices and/or use them in different
order. As almost all in-tree boards already define their own ethernet
aliases, remove them from the dtsi and add the aliases to the two boards,
that are missing their own definition.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
[dinguyen@kernel.org: rebased to latest dts changes]
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

Merge tag 'v4.19-next-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt

Add binding description for devices from
MT7623. Clock controller, iommu, JPEG Decoder
and SMI conotroller.

* tag 'v4.19-next-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI
  dt-bindings: mediatek: Add JPEG Decoder binding for MT7623
  dt-bindings: iommu: mediatek: Add binding for MT7623
  dt-bindings: clock: mediatek: add support for MT7623
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add ethernet<n> alias for all gmacs on the devkit.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: move ethernet aliases to board file

mvebu dt for 4.20 (part 2)

Auto-detect nand ECC on the armada-385 based board db-88f6820-amc
instead of hard coded them in the device tree.

* tag 'mvebu-dt-4.20-2' of git://git.infradead.org/linux-mvebu:
  ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

mvebu dt64 for 4.20 (part 2)

 - Add System Error Interrupt support to Armada SoCs (7K/8K)
 - Add CPU idle support on Armada 8K

* tag 'mvebu-dt64-4.20-2' of git://git.infradead.org/linux-mvebu:
  arm64: dts: clearfog-gt-8k: add PCIe slot description
  arm64: dts: marvell: add CP110 ICU SEI subnode
  arm64: dts: marvell: use new bindings for CP110 interrupts
  arm64: dts: marvell: add AP806 SEI subnode
  arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K
  arm64: dts: marvell: Add node labels for the cpus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch add the binding documentation for the iommu and smi
devices on the MT7623 SoC.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This patch adds a binding documentation for the JPEG Decoder of the
MT7623 SoC.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This patch adds binding documentation for MT7623 SoC.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This patch adds bindings for apmixedsys, audsys, bpsys, ethsys,
hifsys, imgsys, infracfg, mmsys, pericfg, topckgen and vdecsys
for MT6723.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This board has a Micron MT29F8G08ABACAWP chip which requires a ECC
strength of 8/512. Rather than hard coding any particular strength the
the nand controller auto-detect the ECC strength based on the ONFI data.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Merge tag 'davinci-for-v4.20/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt

DaVinci DT updates for v4.20
----------------------------
- A non-critical fix to reduce errors on A/DC on Lego Mindstorms EV3
- Support for GPIO expander on DA850 EVM

* tag 'davinci-for-v4.20/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850-lego-ev3: slow down A/DC as much as possible
  ARM: dts: da850-evm: Enable tca6416 on baseboard
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-dt64-3' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

arm64: dts: Amlogic updates for v4.20, round 3
- AXG: fix eMMC

* tag 'amlogic-dt64-3' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson-axg: s400: disable emmc
  arm64: dts: meson-axg: s400: add missing emmc pwrseq
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'uniphier-dt-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

UniPhier ARM SoC DT updates for v4.20

- Add more clocks to NAND controller nodes

- Add SPI controller nodes

- Add SD controller nodes

- Add USB 3.0 and its PHY nodes

- Add PHY nodes for USB 2.0

* tag 'uniphier-dt-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: Add USB2 PHY nodes
  arm64: dts: uniphier: Add USB3 controller nodes
  ARM: dts: uniphier: Add USB2 PHY nodes
  ARM: dts: uniphier: Add USB3 controller nodes
  arm64: dts: uniphier: add SD controller nodes
  ARM: dts: uniphier: add SD/eMMC controller nodes
  arm64: dts: uniphier: add SPI node for LD20, LD11 and PXs3
  ARM: dts: uniphier: add SPI node for UniPhier 32bit SoCs
  ARM: dts: uniphier: add SPI pin-mux node
  arm64: uniphier: dts: add more clocks to Denali NAND controller node
  ARM: uniphier: dts: add more clocks to Denali NAND controller node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

AT91 DT for 4.20 #2

 - fixes NAND size and partitions for some boards

* tag 'at91-4.20-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sama5d4_xplained: even nand memory partitions
  ARM: dts: at91: sama5d3_xplained: even nand memory partitions
  ARM: dts: at91: at91sam9x5cm: even nand memory partitions
  ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets
  ARM: dts: at91: at91sam9x5cm: fix addressable nand flash size
  ARM: dts: at91: sama5d4_xplained: fix addressable nand flash size
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v4.19-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt

mt7623:
- add pmu node
- add subsystem clocks
- add nodes needed for iommu
- add node for the jpeg decoder

* tag 'v4.19-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm: dts: mt7623: add jpeg decoder device node
  arm: dts: mt7623: add iommu/smi device nodes
  arm: dts: mt7623: update subsystem clock controller device nodes
  arm: dts: mt7623: add a performance counter unit device node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v4.20-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Nodes for the newly support rk3188 display controller, a fix for a new
dtc warning, gpio setting for the sdmmc regulator on radxarock and a
new board the "S" variant of the rk3288-based Tinker board, that sports
an added emmc.

* tag 'v4.20-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add rk3288-based Tinker board S
  ARM: dts: rockchip: move shared tinker-board nodes to a common dtsi
  ARM: dts: rockchip: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock
  ARM: dts: rockchip: Fix erroneous SPI bus dtc warnings on rk3036
  ARM: dts: rockchip: add rk3188 lcd controller nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Due to the electrical design of the A/DC circuits on LEGO MINDSTORMS EV3,
if we are reading analog values as fast as possible (i.e. using DMA to
service the SPI) the A/DC chip will read incorrect values - as much as
0.1V off when the SPI is running at 10MHz. (This has to do with the
capacitor charge time when channels are muxed in the A/DC.)

This patch slows down the SPI as much as possible (if CPU is at 456MHz,
SPI runs at 1/2 of that, so 228MHz and has a max prescalar of 256, so
we could get ~891kHz, but we're just rounding it to 1MHz). We also use
the max allowable value for WDELAY to slow things down even more.

These changes reduce the error of the analog values to about 5mV, which
is tolerable.

Commits a3762b13 ("spi: spi-davinci: Add support for SPI_CS_WORD")
and e2540da8 ("iio: adc: ti-ads7950: use SPI_CS_WORD to reduce
CPU usage") introduce changes that allow DMA transfers to be used, so
this slow down is needed now.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

There is a GPIO expander on both the UI board as well as the
baseboard.  This patch enables the second tca6416 and identifies
it as being on the baseboard using _bb as the suffix.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Merge tag 'v4.20-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Some additional new boards, the rk3399-based RockPro64 from Pine64, as well
as the Vamrs Rock960. Another big feature is display support including hdmi
and the Innosilicon hdmiphy on the rk3328, right now enabled on the rock64.
The rock64 also got its spi-nor and spdif enabled. On the px30 we can see
dwc2-based usb support now and finally some misc fixes, like for a new dtc
warning, missing address and size cells and microSD fix on sapphire.

* tag 'v4.20-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: enable display nodes on rk3328-rock64
  arm64: dts: rockchip: add rk3328 display nodes
  arm64: dts: rockchip: add Innosilicon hdmi phy node to rk3328
  arm64: dts: rockchip: add missing address and size cells for rk3399 mipi dsi
  arm64: dts: rockchip: Enable SPI NOR flash on Rock64
  arm64: dts: rockchip: add initial dts support for Rockpro64
  arm64: dts: rockchip: enable dwc2-based otg controller on px30-evb
  arm64: dts: rockchip: add dwc2 otg controller on px30
  dt-bindings: usb: dwc2: add description for px30
  arm64: dts: rockchip: Enable SD card detection for Rock960 boards
  arm64: dts: rockchip: Add support for Rock960 board
  dt-bindings: arm: rockchip: Add binding for Rock960 board
  arm64: dts: rockchip: Split out common nodes for Rock960 based boards
  arm64: dts: rockchip: add spdif sound node for rock64
  arm64: dts: rockchip: Fix microSD in rk3399 sapphire board
  arm64: dts: rockchip: Fix I2C bus unit-address error on rk3399-puma-haikou
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v4.20/dt-signed-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

More devicetree changes for omap variants

There's a patch for previously merged dts changes to remove the last
remaining use of legacy phy_id property.

For dra7, we have a non-urgent PCIe dts fix, enable a PCIe errata for
unaligned access.

For omap5, we enable omap5 USB OTG mode for DWC3 controller.

And we add support for am335x based Moxa UC-2100 series of industrial
computers.

* tag 'omap-for-v4.20/dt-signed-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x: Replace remaining legacy phy_id with phy-handle
  ARM: dts: am335x: add support for Moxa UC-2101 open platform
  ARM: dts: am335x: add common file for UC-2100 series
  ARM: dts: omap5: enable OTG role for DWC3 controller
  ARM: dts: dra7: Enable workaround for errata i870 in PCIe host mode
  ARM: dts: dra7: Fix up unaligned access setting for PCIe EP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add nodes of USB2 physical layer for UniPhier SoC. This supports LD11.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Add USB3 controller nodes including usb-core, resets, regulator, ss-phy
and hs-phy. This supports for LD20, PXs3 and the boards. This includes
additional efuse nodes for obtaining PHY trimming values.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Add nodes of USB2 physical layer for UniPhier SoC. This supports Pro4.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Add USB3 controller nodes including usb-core, resets, regulator, ss-phy
and hs-phy. This supports for Pro4, PXs2 and the boards.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

While it is possible to rework the s400 board to solder an eMMC on it,
it is not the default option and most boards are fitted with a NAND
instead.

Let's disable the emmc device by default to reflect this. The board
equipped with an eMMC will just have to alter the DT in the
bootloader, like we do for the reserved memory regions.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

eMMC pwrseq is defined in the s400 dts but not used in the emmc node.
This is probably just a copy/paste error

Fixes: 221cf34b ("ARM64: dts: meson-axg: enable the eMMC controller")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

This adds support for the PCIe interface on the CON4 mini-PCIe
connector.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

sama5d4_xplained, ssam9x5cm, sama5d2_ptc_ek and sama5d3_xplained nand
flashes have a common memory map. Even the nand memory partitions to
match our NAND flash map available at:

http://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections//demo_nandflash_map_lnx4sam5x.pngSigned-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>

sama5d3_xplained, sam9x5cm, sama5d2_ptc_ek and sama5d4_xplained nand
flashes have a common memory map. Even the nand memory partitions to
match our nand flash map available at:

http://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections//demo_nandflash_map_lnx4sam5x.pngSigned-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>

sam9x5cm, sama5d2_ptc_ek, sama5d3_xplained and sama5d4_xplained nand
flashes have a common memory map. Even the nand memory partitions to
match our nand flash map available at:

http://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections//demo_nandflash_map_lnx4sam5x.pngSigned-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>

The offsets for the bootloader environment and its redundant partition
were inverted. Fix the addresses to match our nand flash map available at:

http://www.at91.com/linux4sam/pub/Linux4SAM/SambaSubsections//demo_nandflash_map_lnx4sam5x.pngSigned-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>

at91sam9x5cm comes with a 2Gb NAND flash. Fix the rootfs size to
match this limit.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>

sama5d4_xplained comes with a 4Gb NAND flash. Increase the rootfs
size to match this limit.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>

The ICU handles several interrupt groups, each of them being a subpart
of the ICU node.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Create an ICU subnode for the NSR interrupts. This subnode becomes the
CP110 interrupt parent, removing the need for the ICU_GRP_NSR parameter.
Move all DT110 nodes to use these new bindings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Add SD controller nodes for LD20 and PXs3.
LD20 does not support the UHS mode, while PXs3 supports it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Add SD controller nodes for LD4, Pro4, sLD8, Pro5, and PXs2.
This is also used as an eMMC controller for LD4, Pro4, and sLD8.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>