This memory is region is where the two-channel audio DMA can pump sound
samples into the SSPA's internal FIFO.

Link: https://lore.kernel.org/r/20200718205019.184927-6-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The ACGR register is at the offset of 0x1024, beyond the 4k originally
assigned to the MPMU range.

Link: https://lore.kernel.org/r/20200718205019.184927-5-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The power management unit, described by the soc_clocks node, controls the
power to the peripherals by the means of power domains with a single
cell -- the domain number.

Link: https://lore.kernel.org/r/20200718205019.184927-4-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

On the XO-1.75, this node represents a bus interface that operates in slave
mode and thus is only able to accommodate a single subnode; no address
cells are necessary.

The Documentation/devicetree/bindings/spi/spi-controller.yaml binding
prefers that we drop the property instead of setting it to zero.

This fixes a DT validation error:

  arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000:
      { ... } is valid under each of {'required': ['spi-slave']},
                                     {'required': ['#address-cells']}

We also need to drop #size-cells:

  arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000:
      '#address-cells' is a dependency of '#size-cells'

Link: https://lore.kernel.org/r/20200718205019.184927-3-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: $nodename:0:
      'camera_i2c' does not match '^i2c(@.*)?'
  mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'sda-gpios' is a required property
  mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'scl-gpios' is a required property

The "gpios" property actually was documented as deprecated, but got dropped
in commit 0175ce4a ("dt-bindings: i2c: Convert i2c-gpio binding to
json-schema"). It's probably best kept forgotten though.

Link: https://lore.kernel.org/r/20200718205019.184927-2-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ux500-dts-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt

Ux500 DTS changes for the v5.9 kernel series:

- Add touchkey to the Samsung Golden.
- Fix up the supply nodes for the AB8500 PWM devices.
- Fix up the cache controller node names.
- Fix the Samsing Skomer accelerometer mounting matrix.

* tag 'ux500-dts-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: dts: ux500-skomer: Correct accel mounting matrix
  ARM: dts: ste: Align L2 cache-controller nodename with dtschema
  ARM: dts: ux500: Supply nodes for the other 2 AB8500 PWM devices
  ARM: dts: ux500: samsung-golden: Add touchkey

Link: https://lore.kernel.org/r/CACRpkdZZgZ1LeOK5zFj5Z6Mh=RVz37hZ-7Z4DQNGC1uaiEVTeA@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'stm32-dt-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.9, round 1

Highlights:
----------

MCU part:
 -Enable stmpe811 on stm32f429
 -Enable l3gd20-gyro on stm32f429
 -Enable panel-ilitek-9341 on stm32f429
 -Fixes for yaml validation (leds, nodes names,
  remove useless bindings ...)
 -Add stm32xxx compatibles for syscon nodes

MPU part:
 -Add support for usb role switch to dwc2
 -Add stm32xxx compatibles for syscon nodes
 -Update uart4 pin configuration for low power mode
  used by dkx and ed1 ST boards
 -Fix uart nodes ordering and uart7_pins_a comments
 -Add the support of uart instances available on STM32MP157 boards:
  - usart3 on stm32mp157c-ev1, stm32mp157a-dk1, and stm32mp157c-dk2
  - uart7 on stm32mp157a-dk1 and stm32mp157c-dk2
  - usart2 on stm32mp157c-dk2
 -Configure I2C5 on stm32mp15 DK boards

* tag 'stm32-dt-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (38 commits)
  ARM: dts: stm32: enable usb-role-switch on USB OTG on stm32mp15xx-dkx
  ARM: dts: stm32: Add compatibles for syscon for stm32mp151
  ARM: dts: stm32: Add compatibles for syscon for stm32h743
  ARM: dts: stm32: Add compatibles for syscon for stm32f746
  ARM: dts: stm32: Add compatibles for syscon for stm32f426
  dt-bindings: arm: stm32: Add compatibles for syscon nodes
  ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrl
  ARM: dts: stm32: configure i2c5 support on stm32mp15xx-dkx
  ARM: dts: stm32: add usart2 node to stm32mp157c-dk2
  ARM: dts: stm32: add uart7 support to stm32mp15xx-dkx boards
  ARM: dts: stm32: add usart3 node to stm32mp157c-ev1
  ARM: dts: stm32: add usart3 node to stm32mp15xx-dkx boards
  ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrl
  ARM: dts: stm32: cosmetic updates in stm32mp15-pinctrl
  ARM: dts: stm32: fix uart7_pins_a comments in stm32mp15-pinctrl
  ARM: dts: stm32: fix uart nodes ordering in stm32mp15-pinctrl
  ARM: dts: stm32: Update UART4 pin states on stm32mp15xx-dkx
  ARM: dts: stm32: Update pin states for uart4 on stm32mp157c-ed1
  ARM: dts: stm32: update uart4 pin configuration for low power on stm32mp157
  dt-bindings: usb: dwc2: Fix issues for stm32mp15x SoC
  ...

Link: https://lore.kernel.org/r/8a9bb27b-fc08-126a-11f7-01354e8577e1@st.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM64 changes for v5.9

1. Enable UFS (Universal Flash Storage) on Exynos7 Espresso board.
2. Fix silent hang after boot off Exynos7 Espresso board.
3. Minor DTS fixes and adjustments with dtschema.

* tag 'samsung-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Add unit address to soc node and move thermal zones on Exynos7
  arm64: dts: exynos: Add unit address to soc node on Exynos5433
  arm64: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings
  arm64: dts: exynos: Keep LDO12 always-on on Espresso
  arm64: dts: exynos: Fix silent hang after boot on Espresso
  arm64: dts: exynos: Remove generic arm,armv8-pmuv3 compatible
  arm64: dts: exynos: Describe PWM interrupts on Exynos7
  arm64: dts: exynos: Add UFS node to Exynos7

Link: https://lore.kernel.org/r/20200721180900.13844-3-krzk@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Samsung DTS ARM changes for v5.9

1. Enable Bluetooth on Artik5 (Exynos3250).
2. Enable accelerometer on Aries boards (Samsung Galaxy S family,
   S5Pv210); multiple fixes.
3. Fix highest frequencies on Exynos5800.
4. Fix rare USB instability on Odroid XU3 family (Exynos5422).
5. Minor DTS fixes and adjustments with dtschema.

* tag 'samsung-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Replace HTTP links with HTTPS ones
  ARM: dts: exynos: Disable frequency scaling for FSYS bus on Odroid XU3 family
  ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420
  ARM: dts: exynos: Define fixed regulators in root node for consistency in Arndale
  ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen
  ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings
  ARM: dts: exynos: Fix missing empty reg/ranges property regulators on Trats
  ARM: dts: exynos: Align L2 cache-controller nodename with dtschema
  ARM: dts: s5pv210: Correct BCM4329 bluetooth node
  ARM: dts: s5pv210: Add BMA023 accelerometer support to Aries
  ARM: dts: s5pv210: Add support for GP2A light sensor on Aries
  ARM: dts: s5pv210: Correct fuelgauge definition on Aries
  ARM: dts: s5pv210: Add interrupt-controller property to gph3
  ARM: dts: exynos: Enable Bluetooth support for Artik5 board
  ARM: dts: exynos: Extend all Exynos5800 A15's OPPs with max voltage data

Link: https://lore.kernel.org/r/20200721180900.13844-2-krzk@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-dts-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM dts updates for v5.9

Add QFPROM and ethernet for ipq8064 and a new DTS for the MikroTik
RB3011 using the same platform.

* tag 'qcom-dts-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: dts: qcom: add qfprom definition to ipq806x
  ARM: dts: qcom: Add MikroTik RB3011
  ARM: dts: qcom: add ethernet definitions to ipq8064

Link: https://lore.kernel.org/r/20200721045032.3430395-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DT updates for v5.9

For SM8250 this adds the main pinctrl/gpio block (TLMM), I2C and SPI
controllers, the CPU subsytem watchdog, inter-processor signalling
controller (IPCC), always-on power/clock controller (AOSS),
inter-processor state machine (SMP2P), defines remoteproc controls
for audio, compute and sensor processors and base definition for the
PM8009 PMIC. It also does fix up a few minor issues from the initial
merge of the platform support.

SC7180 and SDM845 gains interconnect paths and performance tables
defined for display, QUP, QSPI, SDHC and CPUs.

SC7180 gains WiFi support and some cleanups related to the modem
remoteproc.

SDM845 gains inline crypto engine support for UFS, LAB/IBB
regulators for powering display panels, remoteproc relocation debug
support

SM8150 gains USB controller support and the two related PHYs, as well as
thermal zones and throttling support.

IPQ8074 gains USB and SDHCI support.

MSM8916 is being cleaned up, gains interconnect providers and Samsung
A2015 gains accelerometer and magnetometer support.

MSM8994 gains PSCI, SDHCI, SPMI support, I2C, SPI, UART gains DMA
support and the DTS files are cleaned up.

The SDM630 platform DTS is at last merged and initial support for Sony
Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra is added.

* tag 'qcom-arm64-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (66 commits)
  arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators
  arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domains
  arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains
  arm64: dts: qcom: sc7180: Move the fixed-perm property to SoC dtsi
  arm64: dts: qcom: msm8916-samsung-a2015: Add accelerometer/magnetometer
  arm64: dts: qcom: msm8916: Use higher I2C drive-strength only on DB410c
  arm64: dts: qcom: msm8916: Simplify pinctrl configuration
  arm64: dts: msm8916-samsung/longcheer: Move pinctrl/regulators to end of file
  arm64: dts: qcom: sm8250: Drop tcsr_mutex syscon
  arm64: dts: qcom: sc7180: Add missing properties for Wifi node
  arm64: dts: qcom: Fix WiFi supplies on sc7180-idp
  arm64: dts: sdm845: add Inline Crypto Engine registers and clock
  arm64: dts: sc7180: Add sdhc opps and power-domains
  arm64: dts: sdm845: Add sdhc opps and power-domains
  arm64: dts: sc7180: Add OPP table for all qup devices
  arm64: dts: sdm845: Add OPP table for all qup devices
  arm64: dts: sc7180: Add qspi opps and power-domains
  arm64: dts: sdm845: Add qspi opps and power-domains
  arm64: dts: qcom: sdm845: Add cpu OPP tables
  arm64: dts: qcom: sc7180: Drop the unused non-MSA SID
  ...

Link: https://lore.kernel.org/r/20200721044934.3430084-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

ARM64: DT: Hisilicon SoCs DT updates for 5.9

- Refactor hi6220-hikey dts to use phandles for overriding nodes
- Align UART node name to fix dtschema validator warnings for hi6220
- Add basic usb gadget support on hikey960
- Update adv7533 nodes to meet with the binding for hikey and hikey960

* tag 'hisi-arm64-dt-for-5.9' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hisilicon: hikey: fixes to comply with adi, adv7533 DT binding
  dts: hi3660: Add support for basic usb gadget on Hikey960
  arm64: dts: hisilicon: Align UART nodename with dtschema
  arm64: dts: hisilicon: Use phandles for overriding nodes in hi6220

Link: https://lore.kernel.org/r/5F165E8E.3030503@hisilicon.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: DT: Hisilicon ARM32 SoCs updates for v5.9

- Update L2 cache controller nodes to fix dtschema validator warnings
  for hi3620 and hix5hd2

* tag 'hisi-arm32-dt-for-5.9' of git://github.com/hisilicon/linux-hisi:
  ARM: dts: hisilicon: Align L2 cache-controller nodename with dtschema

Link: https://lore.kernel.org/r/5F165FA1.2030301@hisilicon.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Our usual number of patches to improve the Allwinner Device Tree
support, including:
  - CPUFreq / Thermal throttling support for the H5
  - Touchscreen support for the Pinephone
  - New boards: PinePhone v1.2

* tag 'sunxi-dt-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: h5: bananapi-m2-plus-v1.2: Tie in CPU OPPs
  arm64: dts: allwinner: h5: libretech-all-h3-cc: Tie in CPU OPPs
  arm64: dts: allwinner: h5: Add CPU Operating Performance Points table
  arm64: dts: allwinner: h5: Add trip and cooling maps to CPU thermal zones
  arm64: dts: allwinner: h5: Add clock to CPU cores
  ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages
  ARM: dts: sunxi: bananapi-m2-plus-v1.2: Add regulator supply to all CPU cores
  ARM: dts: sunxi: libretech-all-h3-cc: Add regulator supply to all CPU cores
  arm64: dts: sun50i-pinephone: dldo4 must not be >= 1.8V
  arm64: dts: allwinner: Add support for PinePhone revision 1.2
  dt-bindings: arm: sunxi: Add PinePhone 1.2 bindings
  arm64: dts: sun50i-a64-pinephone: Add touchscreen support
  arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone
  ARM: dts: orange-pi-zero-plus2: add leds configuration
  ARM: dts: orange-pi-zero-plus2: enable USB OTG port

Link: https://lore.kernel.org/r/fa48ffcb-3404-41bb-b065-a16717cf5688.lettre@localhostSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'versatile-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt

Versatile DTS changes for the v5.9 kernel cycle, essentially
just a single patch fixing up the node names for schema.

* tag 'versatile-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: dts: arm-realview: Align L2 cache-controller nodename with dtschema

Link: https://lore.kernel.org/r/CACRpkdbkM9ZmuG2FnBmO7upcJfnqq2oSLDCFDXC5b3K+dtps9Q@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree update for 5.9:

- Update i.MX8M OCOTP device node name to match .yaml schema.
- Add ftm_alarm0 device support for layerscape SoCs.
- Add DSPI controller support for lx2160a device.
- A series from Peng Fan to add aliases for various devices on i.MX8
  SoCs.
- Add Hantro G1/G2 VPU device support for imx8mq.
- Add more thermal zone support for ls1028a, ls1043a and ls1046a.
- Other small random changes.

* tag 'imx-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (26 commits)
  arm64: dts: lx2160a-rdb: fix shunt-resistor value
  arm64: dts: ls1028a-qds: Add DSPI flash nodes
  arm64: dts: lx2160a: Increase configuration space size
  arm64: dts: zii-ultra: update MDIO speed and preamble
  arm64: dts: ls1043a: update USB nodes status to match board config
  arm64: dts: imx8mn-evk: add pca9450 for i.mx8mn-evk board
  arm64: dts: imx8mp: add ddr pmu device node
  arm64: dts: ls1043a: add more thermal zone support
  arm64: dts: ls1046a: add more thermal zone support
  arm64: dts: layerscape: add ftm_alarm0 node
  arm64: dts: ls1028a: Add ftm_alarm0 DT node
  arm64: dts: lx2160a: add ftm_alarm0 DT node
  arm64: dts: lx2160a: add DT node for all DSPI controller
  arm64: dts: lx2160a: add dspi controller DT nodes
  arm64: dts: imx8mp: Add fallback compatible to ocotp node
  arm64: dts: imx8qxp: Add ethernet alias
  arm64: dts: imx8qxp: add i2c aliases
  arm64: dts: imx8qxp: add alias for lsio MU
  arm64: dts: imx8m: add mu node
  arm64: dts: imx8m: change ocotp node name on i.MX8M SoCs
  ...

Link: https://lore.kernel.org/r/20200720085536.24138-4-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX device tree update for 5.9:

- New board support: Protonic PRTI6Q/WD2/VT7/RVT and MYiR MYS-6ULX SBC.
- Update IIM, OCOTP and SD/MMC device node name to match .yaml bindings.
- Make tempmon node as child of anatop node according to hardware
  architecture.
- The vf610-zii device update: configure fiber port to 1000BaseX, add
  switch watchdog, MDIO speed and preamble.
- A series from Fabio Estevam to update imx6qdl-sabresd and
  imx6q-tbs2910 for using MDIO node and reset-assert-us.
- Align L2 cache-controller device node name with .yaml schema.
- Enable SATA support for imx6qp-sabreauto and imx6qp-sabresd board.
- A series of patches from Shengjiu Wang to enable various audio
  support on i.MX6 devices.
- Add Gateworks System Controller support for imx6qdl-gw devices.
- Change default #pwm-cells setting to <3> in the SoC dtsi files.
- Other small random changes.

* tag 'imx-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits)
  ARM: dts: vf610-zii-ssmb-spu3: Add node for switch watchdog
  ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd properties
  ARM: dts: imx6q-tbs2910: Pass reset-assert-us
  ARM: dts: imx6q-tbs2910: Add an mdio node
  ARM: dts: imx6qdl-sabresd: Pass reset-assert-us
  ARM: dts: imx6qdl-sabresd: Add an mdio node
  ARM: dts: imx6qdl-gw: add Gateworks System Controller support
  ARM: dts: imx6ull: add MYiR MYS-6ULX SBC
  ARM: dts: vf610-zii-spb4: Add node for switch watchdog
  ARM: dts: colibri-imx6: remove pinctrl-names orphan
  ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files
  ARM: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX
  ARM: dts: vf610-zii-dev-rev-c: Configure fiber port to 1000BaseX
  ARM: dts: ZII: update MDIO speed and preamble
  ARM: dts: vfxxx: Add node for CAAM
  ARM: dts: imx6qp-sabresd: enable sata
  ARM: dts: imx6qp-sabreauto: enable sata
  ARM: dts: add Protonic RVT board
  ARM: dts: add Protonic VT7 board
  ARM: dts: add Protonic WD2 board
  ...

Link: https://lore.kernel.org/r/20200720085536.24138-3-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-bindings-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT bindings for 5.9:

- Add compatible for Protonic PRTI6Q, WD2, RVT, VT7 boards.
- Add compatible for MYiR Tech iMX6ULL Evaluation Board

* tag 'imx-bindings-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: fsl: Add MYiR Tech boards
  dt-bindings: arm: fsl: add different Protonic boards

Link: https://lore.kernel.org/r/20200720085536.24138-2-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'socfpga_dts_update_for_v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.9
- Populate clock entries for Agilex platform
- Add "reset-names" to SPI entries
- Add Maxim max1619 temperature sensor to Arria10 devkit

* tag 'socfpga_dts_update_for_v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: socfpga: add the temperature sensor to the Arria10 devkit
  arm: dts: socfpga: add reset-names to spi node
  arm64: dts: agilex: add nand clocks
  arm64: dts: agilex: populate clock dts entries for Intel SoCFPGA Agilex

Link: https://lore.kernel.org/r/20200719011804.15599-1-dinguyen@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Now that USB OTG driver supports usb role switch by overriding PHY input
signals (A-Valid, B-Valid and Vbus-Valid), enable it on stm32mp15xx-dkx.
dr_mode needn't to be forced to Peripheral anymore, it is set to OTG in
SoC device tree.
USB role (USB_ROLE_NONE, USB_ROLE_DEVICE, USB_ROLE_HOST) will be provided
by STUSB1600 Type-C controller driver.

This patch depends on "Add STUSB160x Type-C port controller support"
series, which is under review.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Since commit ad440432 ("dt-bindings: mfd: Ensure 'syscon' has a more specific compatible")
it is required to provide at least 2 compatibles string for syscon node.
This patch document the missing compatibles for stm32 SoCs.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Move spi4_pins_a nodes from pinctrl_z to pinctrl as the associated pins
are not in BANK Z.

Fixes: 498a7014 ("ARM: dts: stm32: Add missing pinctrl entries for STM32MP15")
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Configure I2C5 on stm32mp15 DK boards. It's available and can be used on:
- Arduino connector
- GPIO expansion connector
Keep it disabled by default, so the pins are kept in their initial state to
lower power consumption. This way they can also be used as GPIO.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Adds the usart2 node to stm32mp157c-dk2 board. usart2 pins are connected
to Bluetooth component. usart2 is disabled by default.
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Adds uart7 node to stm32mp15xx-dkx and uart7 alias to stm32mp157a-dk1 and
stm32mp157c-dk2 boards. uart7 pins are connected to Arduino connector.
uart7 is disabled by default.
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Adds the usart3 node to stm32mp157c-ev1 board. usart3 pins are connected to
GPIO Expansion connector. usart3 is disabled by default.
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Adds usart3 node to stm32mp15xx-dkx and usart3 alias to stm32mp157a-dk1
and stm32mp157c-dk2 boards. usart3 pins are connected to GPIO Expansion
connector. usart3 is disabled by default.
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Adds usart2_pins_c, usart3_pins_b, usart3_pins_c and uart7_pins_c pins
configurations in stm32mp15-pinctrl.
- usart2_pins_c pins are connected to Bluetooth chip on dk2 board.
- usart3_pins_b pins are connected to GPIO expansion connector on evx board.
- usart3_pins_c pins are connected to GPIO expansion connector on dkx board.
- uart7_pins_c pins are connected to Arduino Uno connector on dkx board.
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Use tabs where possible and remove multiple blanks lines.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

The Bananapi M2 Plus H5 v1.2 can work with the standard H5 OPPs.
Tie them in to enable CPU frequency scaling.

The original Bananapi M2 Plus H5 is left out for now, as adding
the fixed regulator along with the enable pin seemed to cause some
glitching in Linux.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-9-wens@kernel.org

The Libre Computer ALL-H3-CC H5 variant can work with the standard H5
OPPs. Tie them in to enable CPU frequency scaling.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-8-wens@kernel.org

Add an OPP (Operating Performance Points) table for the CPU cores for
boards to include to DVFS (Dynamic Voltage & Frequency Scaling) on the
H5. The table originates from Armbian, but the maximum voltage is raised
slightly to account for boards using slightly higher voltages.

The table and tie in to the CPU cores are put in a separate dtsi file
that board files can include to opt in. Or they can define their own
tables if the standard one does not fit.

This has been tested on the Libre Computer ALL-H3-CC-H5 and the Bananapi
M2+ v1.2 H5, both with adequate cooling. The former has a fixed 1.2V
regulator, while the latter has a GPIO controlled regulator switchable
between 1.1V and 1.3V.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-7-wens@kernel.org

This enables passive cooling by down-regulating CPU voltage and frequency.
The trip points were copied from the H3.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-6-wens@kernel.org

The ARM CPU cores are fed by the CPU clock from the CCU. Add a
reference to the clock for each CPU core, along with the clock
transition latency.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-5-wens@kernel.org

The Bananapi M2+ uses a GPIO line to change the effective resistance of
the CPU supply regulator's feedback resistor network. The voltages
described in the device tree were given directly by the vendor. This
turns out to be slightly off compared to the real values.

The updated voltages are based on calculations of the feedback resistor
network, and verified down to three decimal places with a multi-meter.

Fixes: 6eeb4180 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-4-wens@kernel.org