Merge tag 'samsung-dt64-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM64 changes for v5.16, part two

1. Add chassis-type property.
2. Add ChipID node to ExynosAutov9 DTSI.

* tag 'samsung-dt64-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: add chipid node for exynosautov9 SoC
  arm64: dts: exynos: add 'chassis-type' property

Link: https://lore.kernel.org/r/20211026094709.75692-4-krzysztof.kozlowski@canonical.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-dt-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.16, part two

Add chassis-type property.

* tag 'samsung-dt-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: s5pv210: add 'chassis-type' property
  ARM: dts: exynos: add 'chassis-type' property

Link: https://lore.kernel.org/r/20211026094709.75692-3-krzysztof.kozlowski@canonical.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

AT91 DT #2 for 5.16:

- Add DT nodes for TCB and RTC blocks on SAMA7G5
- Add TCB0 for clocksource and clockevent functionality fallback only in
  case PIT64B will fail to probe and as a testbed for this feature on
  the Evaluation Kit.

* tag 'at91-dt-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sama7g5-ek: use blocks 0 and 1 of TCB0 as cs and ce
  ARM: dts: at91: sama7g5: add tcb nodes
  ARM: dts: at91: sama7g5: add rtc node

Link: https://lore.kernel.org/r/20211025163428.26285-1-nicolas.ferre@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add a 'reg' entry for ICST clock nodes on the Arm Ltd platforms. The 'reg'
entry is the VCO register address. With this, the node name can be updated
to use a generic node name, 'clock-controller', and a unit-address.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211024232239.211822-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add a 'reg' entry for register-bit-led nodes on the Arm Ltd platforms.
The 'reg' entry is the LED control register address. With this, the node
name can be updated to use a generic node name, 'led', and a
unit-address.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211024232003.211484-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

It can be compatible with exynos850's chipid. The SoC has eight chipid
registers that can be used for OTP.

Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20211021012017.158919-3-chanho61.park@samsung.comSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

Merge tag 'aspeed-5.16-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt

ASPEED device tree updates for 5.16, round 2

 - New machines:

  * Inventec Transformers, an x86 family server with an AST2600 BMC

 - Updates to the Everest and Rainier sensors, gpios and KCS devices

 - New UART routing device tree description

* tag 'aspeed-5.16-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
  ARM: dts: aspeed: Add uart routing to device tree
  ARM: dts: aspeed: rainier: Enable earlycon
  ARM: dts: aspeed: rainier: Add front panel LEDs
  ARM: dts: aspeed: rainier: Add 'factory-reset-toggle' as GPIOF6
  ARM: dts: aspeed: rainier: Remove PSU gpio-keys
  ARM: dts: aspeed: rainier: Remove gpio hog for GPIOP7
  ARM: dts: aspeed: rainier: Add eeprom on bus 12
  ARM: dts: aspeed: p10bmc: Enable KCS channel 2
  ARM: dts: aspeed: p10bmc: Use KCS 3 for MCTP binding
  ARM: dts: aspeed: Adding Inventec Transformers BMC
  ARM: dts: aspeed: everest: Fix bus 15 muxed eeproms
  ARM: dts: aspeed: everest: Add IBM Operation Panel I2C device
  ARM: dts: aspeed: everest: Add I2C switch on bus 8
  ARM: dts: aspeed: rainier and everest: Remove PCA gpio specification
  ARM: dts: aspeed: p10bmc: Fix ADC iio-hwmon battery node name

Link: https://lore.kernel.org/r/CACPK8Xd=eAMk-S3akhGgL4i_K190Nz9t=_CrdHQMJ+nbW172mg@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add support for the Mercury+ AA1 module for Arria 10 SoC FPGA.
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Signed-off-by: Joanna Brozek <jbrozek@antmicro.com>
Signed-off-by: Mariusz Glebocki <mglebocki@antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Signed-off-by: Maciej Mikunda <mmikunda@antmicro.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211021151736.2096926-2-pan@semihalf.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The spear13xx PCI 'interrupt-map' property is not parse-able.
'#interrupt-cells' is missing and there are 3 #address-cells. Based on the
driver, the only supported interrupt is for MSI. Therefore, 'interrupt-map'
is not needed.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211022141156.2592221-1-robh@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Use blocks 0 and 1 of TCB0 for clocksource and clockevent functionality.
PIT64B is already enabled on SAMA7G5 targets for this but TCB0 will be
used as a fallback only in case PIT64B will fail to probe.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211020094656.3343242-4-claudiu.beznea@microchip.com

Add TCB nodes.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211020094656.3343242-3-claudiu.beznea@microchip.com

Add RTC node.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[claudiu.beznea: add sama7g5 compatible as the IP has 2 extra registers
 compared with sam9x60]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211020094656.3343242-2-claudiu.beznea@microchip.com

Add LPC uart routing to the device tree for Aspeed SoCs.
Signed-off-by: Oskar Senft <osk@google.com>
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Tested-by: Lei YU <yulei.sh@bytedance.com>
Link: https://lore.kernel.org/r/20210927023053.6728-6-chiawei_wang@aspeedtech.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Rainier was missed when enabling all of the other machines in
commit 239566b0 ("ARM: dts: aspeed: Set earlycon boot argument").
Signed-off-by: Joel Stanley <joel@jms.id.au>

These were meant to be part of commit 4fb27b3f ("ARM: dts: aspeed:
rainier: Add system LEDs") but went missing.
Signed-off-by: Joel Stanley <joel@jms.id.au>

The state of this GPIO determines whether a factory reset has been
requested. If a physical switch is used, it can be high or low. During boot,
the software checks and records the state of this switch. If it is different
than the previous recorded state, then the read-write portions of memory are
reformatted.
Signed-off-by: Isaac Kurth <isaac.kurth@ibm.com>
Reviewed-by: Adriana Kobylak <anoo@us.ibm.com>
Link: https://lore.kernel.org/r/20210714214741.1547052-1-blisaac91@gmail.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Remove the gpio-keys entries for the power supply presence lines from
the Rainier device tree. The user space applications are going to change
from using libevdev to libgpiod.
Signed-off-by: B. J. Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20210623230401.3050076-1-bjwyman@gmail.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Only the pass 1 Ingraham board (Rainier system) had a micro-controller
wired to GPIOP7 on ball Y23. Pass 2 boards have this ball wired to the
heartbeat LED, so remove the hog as this device tree supports pass 2.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210915214738.34382-5-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

The devicetree was missing an eeprom.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210915214738.34382-4-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Rainier uses KCS channel 2 as the source for the debug-trigger
application outlined at [1] and implemented at [2].

[1] https://github.com/openbmc/docs/blob/master/designs/bmc-service-failure-debug-and-recovery.md
[2] https://github.com/openbmc/debug-triggerSigned-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210623033854.587464-8-andrew@aj.id.auSigned-off-by: Joel Stanley <joel@jms.id.au>

The MCTP LPC driver was loaded by hacking up the compatible in the
devicetree node for KCS 4. With the introduction of the raw KCS driver
this hack is no-longer required. Use the regular compatible string for
KCS 4 and configure the appropriate SerIRQ.

The reset state of the status bits on KCS 4 is inappropriate for the
MCTP LPC binding. Switch to KCS 3 which has a different reset behaviour.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Initial introduction of Inventec Transformers x86 family equipped with
AST2600 BMC SoC.
Signed-off-by: Tommy Lin <Lin.TommySC@inventec.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/7d7b20575f994a3c9018223a3c5f198d@inventec.comSigned-off-by: Joel Stanley <joel@jms.id.au>

The eeproms on bus 15 muxes were at the wrong addresses.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211020215321.33960-6-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Set I2C bus 14 to multi-master mode and add the panel device that will
register the I2C controller as a slave device.
In addition, in early Everest systems, the panel device was behind an
I2C switch, which doesn't work for slave mode. Get it working (albeit
unreliably, since a master transaction might switch the switch at any
moment) by defaulting the switch channel to the one with the panel.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211020215321.33960-5-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

The switch controls two busses containing some VRMs.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211020215321.33960-4-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Specifying gpio nodes under PCA led controllers no longer does anything,
so remove those nodes in the device trees.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211020215321.33960-3-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

In keeping with previous systems, call the iio-hwmon bridge node
"iio-hwmon-battery" to distinguish it as the battery voltage
sensor.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211020215321.33960-2-eajames@linux.ibm.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Merge tag 'omap-for-v5.16/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Changes for omap gpmc bindings and devicetree files for v5.16

A series of changes to update the gpmc related bindings to yaml
format, and a few non-urgent dts fixes.

* tag 'omap-for-v5.16/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap: fix gpmc,mux-add-data type
  ARM: dts: omap: Fix boolean properties gpmc,cycle2cycle-{same|diff}csen
  dt-bindings: memory-controllers: ti,gpmc: Convert to yaml
  dt-bindings: mtd: ti,gpmc-onenand: Convert to yaml
  dt-bindings: mtd: ti,gpmc-nand: Convert to yaml
  dt-bindings: memory-controllers: Introduce ti,gpmc-child
  dt-bindings: net: Remove gpmc-eth.txt
  dt-bindings: mtd: Remove gpmc-nor.txt

Link: https://lore.kernel.org/r/pull-1634280279-284035@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

* 'mstar-dt-next' of https://github.com/linux-chenxing/linux:
  ARM: dts: mstar: Mark timer with arm,cpu-registers-not-fw-configured
  ARM: dts: mstar: Add rtc device node

Link: https://lore.kernel.org/r/20211020163010.3079-1-romain.perier@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The vendor u-boot does not configure the arch timer correctly on
MStar, let Linux do it.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/linux-arm-kernel/20210923170747.5786-2-romain.perier@gmail.com

This adds the definition of the rtc device node. The RTC being able to
work with the oscillator at 12Mhz for now, it shares the same xtal than
the watchdog.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/all/20210823171613.18941-4-romain.perier@gmail.com

This is already in v5.15-rc5, but I'm adding it here as well to get
a clean build of the dts files.

* tag 'arm-soc/for-5.15/devicetree':
  ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address
  ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting
  ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states
  ARM: dts: bcm2711: fix MDIO #address- and #size-cells
  ARM: dts: bcm283x: Fix VEC address for BCM2711

Merge tag 'v5.16-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Adapt gpio subnode names to match the yaml binding and removal
of the actually non-matching fallback-string for usb-phys
on rk3066/rk3188 (most-specific compatible is and must always
be used).

* tag 'v5.16-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: remove usb-phy fallback string from rk3066a/rk3188
  ARM: dts: rockchip: change gpio nodenames

Link: https://lore.kernel.org/r/3630369.N7QejLDta5@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.16-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Idle-cooling information for rk3399, rk356x additions (tsadc resets,
i2s, spdif, pwm), rk3368 powerdomains, fixes to make gpio subnodes
compliant with the new pinctrl yaml binding and addition of the
chassis-type for the non-sbc devices.

* tag 'v5.16-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Add idle cooling devices to rk3399
  arm64: dts: rockchip: fix resets in tsadc node for rk356x
  arm64: dts: rockchip: Add analog audio on Quartz64
  arm64: dts: rockchip: Add i2s1 on rk356x
  arm64: dts: rockchip: change gpio nodenames
  arm64: dts: rockchip: add 'chassis-type' property
  arm64: dts: rockchip: add powerdomains to rk3368
  dt-bindings: arm: rockchip: add rk3368 compatible string to pmu.yaml
  arm64: dts: rockchip: enable spdif on Quartz64 A
  arm64: dts: rockchip: add spdif node to rk356x
  arm64: dts: rockchip: add pwm nodes for rk3568

Link: https://lore.kernel.org/r/4536780.s7XYDJ6uuW@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'gemini-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt

Gemini changes for the v5.16 kernel cycle:

- Add device trees for Edimax NS2502 and SSI 1328

- Consolidate PCI interrupts

* tag 'gemini-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: gemini: Consolidate PCI interrupt-map properties
  ARM: gemini: add device tree for ssi1328
  ARM: gemini: add device tree for edimax NS2502
  dt-bindings: add vendor prefix for ssi
  dt-bindings: add vendor prefix for edimax
  ARM: dts: gemini: add labels for USB, IDE, flash and ethernet

Link: https://lore.kernel.org/r/CACRpkdac5Sbt42CtuLMgCazfHdhcP98mEKGjeZ-DVcb=_N90Bg@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ixp4xx-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt

IXP4xx DTS changes for the v5.16 kernel:

- Add the PTP timesource

- Push down PCI interrupt properties to the individual
  board files.

* tag 'ixp4xx-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: ixp4xx: Group PCI interrupt properties together
  ARM: dts: Add PTP timesource to the IXP456x

Link: https://lore.kernel.org/r/CACRpkdbSJ662h_B9mAGdXWBeq8ZwKTQvSJ7cZ2x2d8UgELP5QA@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Our usual round of DT patches for the 5.16 merge window, with:
  - DT schema fixes
  - I2S support for the R40
  - HDMI support for the pinetab
  - devfreq support for the A64 GPU

* tag 'sunxi-dt-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
  dt-bindings: interconnect: sunxi: Add R40 MBUS compatible
  arm64: dts: allwinner: NanoPi R1S H5: Add generic compatible string for I2C EEPROM
  arm64: dts: allwinner: pinetab: Add HDMI support
  arm64: dts: allwinner: a64: Add GPU opp table
  ARM: dts: sun8i: r40: Add I2S nodes
  dt-bindings: sound: sun4i-i2s: add Allwinner R40 I2S compatible
  arm64: dts: allwinner: teres-i: Remove wakekup-source from the PMIC
  arm64: dts: allwinner: teres-i: Add missing reg
  arm64: dts: allwinner: pinetab: Change regulator node name to avoid warning
  arm64: dts: allwinner: a100: Fix thermal zone node name
  arm64: dts: allwinner: h6: Fix de3 parent clocks ordering
  arm64: dts: allwinner: h5: Fix GPU thermal zone node name
  ARM: dts: cubieboard4: Remove the dumb-vga-dac compatible
  ARM: dts: tbs711: Fix touchscreen compatible
  ARM: dts: sunxi: Fix the SPI NOR node names
  ARM: dts: sunxi: Fix OPPs node name
  ARM: dts: sunxi: Fix OPP arrays
  ARM: dts: sunxi: Rename gpio pinctrl names
  ARM: dts: sunxi: Rename power-supply names
  dt-bindings: sunxi: Add Allwinner A80 PRCM Binding
  ...

Link: https://lore.kernel.org/r/5cad5ac6-187d-4d36-9437-5821c6e8242d.lettre@localhostSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt64-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree changes for 5.16:

- New board support: LX2160A based BlueBox3, S32G2 EVB and RDB2 boards.
- Quite some updates on imx8mq-librem5 board: delay the startup of the
  SDIO, add power sequencing for M.2 cards, add wifi regulator, add
  panel reset GPIO, fix led_r and led_g pinctrl, etc.
- Fix the SPI chipselect polarity for a couple of i.MX8MM boards.
- Add GPU nodes for i.MX8MM 2D and 3D core.
- Add VPU and DISP blk-ctrl devices for i.MX8MM.
- A series from Michael Walle to LS1028A device trees and add GPU
  support.
- Random and small updates on various boards.

* tag 'imx-dt64-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits)
  arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on SD card
  arm64: dts: imx8mm-venice-gw7901.dts: disable pgc_gpumix
  arm64: dts: imx8mq-librem5: set debounce interval of volume buttons to 50ms
  arm64: dts: imx8mq-librem5: Limit the max sdio frequency
  arm64: dts: imx8mq-librem5: add power sequencing for M.2 cards
  arm64: dts: imx8mq-librem5: delay the startup of the SDIO
  arm64: dts: imx8mq-librem5: wire up the wifi regulator
  arm64: dts: imx8mq-librem5: Fix led_r and led_g pinctrl assignments
  arm64: dts: imx8mq-librem5: add reset gpio to mantix panel description
  arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY
  arm64: dts: imx8mm: add DISP blk-ctrl
  arm64: dts: imx8mm: add VPU blk-ctrl
  arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core
  arm64: dts: imx8mm: put USB controllers into power-domains
  arm64: dts: imx8mm: add GPC node
  arm64: dts: ls1028a: mark internal links between Felix and ENETC as capable of flow control
  arm64: dts: freescale: Fix 'interrupt-map' parent address cells
  arm64: dts: ls1028a: use phy-mode instead of phy-connection-type
  arm64: dts: ls1028a: move PHY nodes to MDIO controller
  arm64: dts: ls1028a: disable usb controller by default
  ...

Link: https://lore.kernel.org/r/20211016140138.1603-4-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX device tree changes for 5.16:

- New board support: Kobo Libra H2O, Tolino Vision 5, SKOV LT2 and
  Colibri i.MX6ULL eMMC variants.
- A series from Fabio Estevam to correct SPI chipselect polarity for
  various i.MX6/7 boards.
- A couple of patches from Krzysztof Kozlowski to clean up unsupported
  properties from imx6dl-b1x5v2 and imx6dl-prtrvt boards.
- A series from Li Yang to clean up LS1021a based boards and add missing
  device nodes.
- A series from Matthias Schiffer to fix typo, add SPI-NOR flash and
  partition layout for imx7-tqma7/mba7 boards.
- Fix the schema check errors in i.MX PCIe device nodes.
- Other random and small fix-up and device additions.

* tag 'imx-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (42 commits)
  ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash
  ARM: dts: ls1021a: move thermal-zones node out of soc/
  ARM: dts: ls1021a-tsn: remove undocumented property "position" from mma8452 node
  ARM: dts: ls1021a-qds: change fpga to simple-mfd device
  ARM: dts: ls1021a: add #power-domain-cells for power-controller node
  ARM: dts: ls1021a: add #dma-cells to qdma node
  ARM: dts: ls1021a: fix memory node for schema check
  ARM: dts: ls1021a: remove regulators simple-bus
  ARM: dts: ls1021a: disable ifc node by default
  ARM: dts: ls1021a: breakup long values in thermal node
  ARM: dts: ls1021a: fix board compatible to follow binding schema
  ARM: dts: ls1021a: update pcie nodes for dt-schema check
  ARM: dts: ls1021a-qds: Add node for QSPI flash
  ARM: dts: ls1021a: change to use SPDX identifiers
  ARM: dts: ls1021a: change dma channels order to match schema
  ARM: dts: ls1021a: remove clock-names property for i2c nodes
  ARM: dts: imx6dl-prtrvt: drop undocumented TRF7970A NFC properties
  ARM: dts: imx6: phytec: Add gpio pinctrl for i2c bus recovery
  ARM: dts: imx6: skov: provide panel support for lt2 variants
  ARM: dts: imx6qdl-apalis: Fix typo in ADC comment
  ...

Link: https://lore.kernel.org/r/20211016140138.1603-3-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-bindings-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT bindings update for 5.16:

- Various board compatible addition: NXP S32G2, LS1021A TSN, Toradex
  Colibri i.MX6ULL, LX2160A BlueBox 3 boards.
- Toradex board and module compatibles clean-up.
- Convert fsl-linflexuart bindings to json-schema format and add S32G2
  compatible.
- Add bindings and defines for i.MX8MM VPU and DISP blk-ctrl.

* tag 'imx-bindings-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: fsl: add ls1021a-tsn board
  dt-bindings: power: imx8mm: add defines for DISP blk-ctrl domains
  dt-bindings: soc: add binding for i.MX8MM DISP blk-ctrl
  dt-bindings: power: imx8mm: add defines for VPU blk-ctrl domains
  dt-bindings: soc: add binding for i.MX8MM VPU blk-ctrl
  dt-bindings: arm: fsl: Add E70K02 based ebook readers
  dt-bindings: arm: fsl: add toradex,colibri-imx6ull-emmc
  dt-bindings: arm: fsl: clean-up all toradex boards/modules
  dt-bindings: serial: fsl-linflexuart: add compatible for S32G2
  dt-bindings: serial: fsl-linflexuart: convert to json-schema format
  dt-bindings: arm: fsl: add NXP S32G2 boards
  dt-bindings: arm: fsl: document the LX2160A BlueBox 3 boards

Link: https://lore.kernel.org/r/20211016140138.1603-1-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>